Tunable Multi-Port Surface Plasmon Polariton Excitation with Nanostructures

Surface plasmon polaritons (SPPs) have appealing features such as tighter spatial confinement and higher local field intensity. Manipulation of surface plasmon polaritons on metal/dielectric interface is an important aspect in the achievement of integrated plasmonic circuit beyond the diffraction limit. Here, we introduce a design of pin cushion structure and a holographic groove pattern structure for tunable multi-port SPPs excitation and focusing. Free space light is coupled into SPPs through momentum matching conditions. Both nanostructures are capable of tunably controlling of SPPs depending on the incident polarizations, while the holographic method provides more flexibility of wavelength-dependent excitations. Furthermore, a quantitative method is applied to calculate the efficiencies of excitation for both nanostructures under different conditions, including radially polarized incident beams. These results can work as a guidance and be helpful to further choice of the suitable design strategies for variable plasmonic applications such as beam splitter, on-chip spectroscopy, and plasmonic detectors.     

Research on Spoof Surface Plasmon Polaritons (SPPs) at Microwave Frequencies: a Bibliometric Review

Plasmonics - In recent years, Spoof surface plasmon polaritons (SPPs) have been studied at microwave (MW) frequencies. The Spoof SPPs can be supported by plasmonic metamaterials, which are usually...     

Complicated Wavefront Shaping of Surface Plasmon Polaritons on Metal Surface by Holographic Groove Patterns

Surface plasmon polaritons (SPPs) manipulation on metal surfaces is important for constructing ultracompact integrated micro/nano-optical devices and systems. We employ the methodology of surface electromagnetic wave holography (SWH) to design holographic groove patterns for controlling SPPs with complicated wavefronts traveling on metal surface. SPPs are scattered by these deli groove patterns and interfere with each other to form desired SPP wavefronts. Several devices are demonstrated to control the intensities and phases of SPPs, such as focusing a plane SPP or diverging SPPs to two points with different phases, and focusing SPPs with complicated beam profile to a point. The finite-difference time-domain simulations show that in all cases, the predesignated functionalities are fully achieved by the designed plasmonic holographic structures. The results strongly support the power of SWH for shaping the complicated wavefront of in-plane transporting SPPs.     

Extraordinary Optical Transmission Property of X-Shaped Plasmonic Nanohole Arrays

Optical transmission properties of periodic X-shaped plasmonic nanohole arrays in a silver film are investigated by performing the finite element method. Obvious peaks appear in the transmission spectra due to surface plasmon polaritons (SPPs) on the top surface of the silver film, to the Fabry–Ferot resonance effect of SPPs in the nanohole, and to the localized surface plasmon resonance of the nanohole. Besides the topologic shape parameters of the X-shaped nanohole, transmission properties strongly depend on incident polarization. The results of this study not only present a tunable plasmonic filter, but also aid in the understanding of the mechanisms of the extraordinary optical transmission phenomenon.     

Plasmonic Band Gap: Role of the Slit Width in 1D Metallic Grating on Higher Refractive Index Substrate

This paper reports the excitation of surface plasmon polaritons (SPPs) and associated plasmonic band gap (PBG) while using TM plane wave interacting with 1D metallic grating on higher refractive index GaP substrate. A simple method is introduced to estimate the PBG which is crucial for many plasmonic devices. The PBG is estimated by measuring the transmission spectra obtained through the plasmonic grating structures when slit width is varied while periodicity and the thickness of the gold (Au) film remained fixed. The PBG is observed for the grating devices whose slit width is less than one third of the periodicity which is caused by the presence of a higher plasmonic mode. The PBG is absent for the grating device whose slit width is slightly less than half and greater than one third of the periodicity. Such grating devices support only a fundamental plasmonic mode because the profile/shape of the slit in the grating device is more like a sinusoidal nature. Furthermore, such grating offers intermediate scattering to the incident light and the SPP as well which in turn couple more incident energy to the SPPs. Far-field modelling results also support the results obtained through experiment.

     

Imaging and Characterizing Long-Range Surface Plasmon Polaritons Propagating in a Submillimeter Scale by Two-Color Two-Photon Photoelectron Emission Microscopy

Long-range surface plasmon polaritons (SPPs), which propagate along metal/dielectric interfaces to submillimeter distances in the range of near-infrared (NIR) excitation wavelength, were examined by two-color two-photon photoelectron emission microscopy (2P-PEEM). Interferences between incident NIR photons and SPPs excited by the NIR photons at surface defects were imaged by detecting photoelectrons emitted from a gold surface, assisted by simultaneously irradiated ultraviolet photons which are to overcome the workfunction of the surface. The wavelength of the interference beat depends sensitively on the NIR wavelength. By analyzing the interference beat, the dispersion curve as well as phase and group velocities of SPP’s were experimentally obtained. The results closely match the theoretical one based on the Drude free electron model, indicating that two-color 2P-PEEM is applicable not only to the visualization of NIR-excited SPPs but also to the quantitative analysis of its physical properties. This method will be widely used to observe SPPs for various artificial plasmonic devices.     

Coupled Plasmonic Cavities on Moire Surfaces

Surface plasmon polariton (SPP) waveguides formed by coupled plasmonic cavities on metallic Moire surfaces have been investigated both experimentally and numerically. The Moire surface, fabricated by interference lithography, contains periodic arrays of one-dimensional cavities. The coupling strength between the cavities has been controlled by changing the periodicities of the Moire surface. The ability to control the coupling strength allows us to tune the dispersion and the group velocity of the plasmonic coupled cavity mode. Reflection measurements and numerical simulation of the array of SPP cavities have shown a coupled resonator type plasmonic waveguide band formation within the band gap. Coupling coefficients of cavities and group velocities of SPPs are calculated for a range of cavity sizes from weakly coupled regime to strongly coupled regime.     

Optimization of Optoelectronic Plasmonic Structures

We discuss the interplay between surface plasmon polaritons (SPPs) and localized shape resonances (LSRs) in a plasmonic structure working as a photo-coupler for a GaAs quantum well photodetector. For a targeted electronic inter-subband transition inside the quantum well, maximum photon absorption is found by compromising two effects: the mode overlapping with incident light and the lifetime of the resonant photons. Under the optimal conditions, the LSR mediates the coupling between the incident light and plasmonic structure while the SPP provides long-lived resonance which is limited ultimately by metal loss. The present work provides insight to the design of plasmonic photo-couplers in semiconductor optoelectronic applications.     

Scattering-Suppressed Plasmonic Bends and Adapters with Gradient Refractive Index Medium

We propose the designs of plasmonic bends and adapters with low scattering loss in visible region theoretically. Tens of nanometers thick gradient refractive index medium is deposited on the metallic surface, which can confine and release the surface plasmon polaritons (SPPs). When SPPs can be strongly confined the metallic surface and propagate along the corners of the plasmonics devices, the scattering loss can be dramatically suppressed. Full wave simulations based on a finite element method have been performed to validate our proposal. Compared with the same class of design, our method can be achieved only with isotropic materials.     

Efficient and Directional Excitation of Surface Plasmon Polaritons by Oblique Incidence on Metallic Ridges

For many years, the search for efficient surface plasmon polariton (SPP) excitation mechanisms has been a recurring matter in the development of compact plasmonic devices. In this work, we excited SPPs illuminating a subwavelength metallic ridge with a focused spot to characterize the coupling efficiency by varying the incidence angle of the excitation beam from ??50 to 50°. The intensity distribution of the excited SPPs was measured using leakage radiation microscopy to determine the relative coupling efficiency in the wavelength interval from 740 to 840 nm. We modeled the excitation efficiency as a function of the incidence angle using a simple analytical diffraction model. Two ridges of different width (200 and 500 nm) were used to compare results and validate the model. The experimental results show a higher coupling efficiency at oblique incidence, where the coupling was enhanced by factors of 2× for the 500-nm-wide ridge, and 3× for the 200-nm-wide ridge, as well as unidirectional SPP excitation. The experimental results are in good agreement with the proposed model.     

A Super Lens System for Demagnification Imaging Beyond the Diffraction Limit

A super lens system is proposed to achieve subdiffraction limit demagnification imaging. The super lens system consists of a hyperlens with planar input and output surfaces, a metal superlens, and a plasmonic reflector. By employing the hyperlens to transform evanescent waves into propagating waves and employing the metal superlens and the plasmonic reflector to amplify evanescent waves, the super lens system can produce a subdiffraction limit image with relatively high electric field intensity. The reduction factor of the super lens system depends on the geometric parameters of the hyperlens. Simulation results show that an image with a half-pitch resolution of about one tenth the operating wavelength and a reduction factor of about 2.2 can be produced by the super lens system. The proposed super lens system has potential applications in nanolithography.     

Effects of Dielectric Anisotropy on Surface Plasmon Polaritons in Three-Layer Plasmonic Nanostructures

The effects of highly anisotropic dielectric on surface plasmon polaritons (SPPs) are investigated in several three-layer plasmonic nanostructures. Dispersion relations of SPPs in anisotropic-dielectric-metal (ADM), dielectric-anisotropic-metal (DAM), and metal-anisotropic-metal (MAM) structures are analytically derived. The numerical results in the visible indicate that, in ADM, the propagation length of a conductor-gap-dielectric mode is changed from 5.9 to 91 μm and its cutoff thickness from 83 to 7 nm with varying the optical axis, while in DAM, the influences of anisotropic dielectric are reversed on propagation length and cutoff thickness. In MAM, by tuning the optical axis, the light confinement of symmetry SPPs mode varies about 10 %. Further numerical calculations show that the above results induced by the anisotropy of dielectric can be extended to the telecommunication frequency. The improved mode properties may be used in plasmonic-based nanodevices and tunable single surface plasmon sources.     

Numerical Investigation of a Branch-Shaped Filter Based on Metal-Insulator-Metal Waveguide

Using the finite difference time-domain method, we present a comprehensive numerical investigation of a branch-shaped filter based on the metal-insulator-metal (MIM) waveguide. The results show that several passbands and stopbands appear in the transmission spectra, which are resulted by the phase differences between the surface plasmon polaritons (SPPs) propagating along the straight waveguide and the SPPs resonating in the circuit formed by the branch and the straight waveguide. The effects of the structural parameters of the branch-shaped filters on their transmission properties are also studied. These results not only present an alternative plasmonic filter for the MIM waveguides but also help us to understand the transmission properties of the circuit-shaped structures.     

Multi-Directional Plasmonic Splitter and Polarization Analyzer Based on the Catenary Metasurface

Owing to the unique properties of strongly confined and enhanced electric fields, surface plasmon polaritons (SPPs) provide a new platform for the realization of ultracompact plasmonic circuits. However, there are challenges in coupling light into SPPs efficiently and subsequently routing SPPs. Here, we propose a multi-directional SPP splitter and polarization analyzer based on the catenary metasurface. Based on the abundant electromagnetic modes and geometric phase modulation principle of catenary structure, the device has realized high-efficiency beam splitting for four different polarization states (x-polarization, y-polarization, LCP, and RCP). The central wavelength of the device is 632 nm and the operation bandwidth can reach 70 nm (585–655 nm). Based on the phenomenon of SPP beam splitting, we present a prototype of a polarization analyzer, which can detect the polarization state of incident light by adding photodetector with light intensity logic threshold in four directions. Moreover, by combining this device with dynamic polarization modulation techniques, it is possible to be served as a router or switch in integrated photonic circuits.

     

High-Resolution Two-Dimensional Atomic Localization Via Tunable Surface Plasmon Polaritons

The two-dimensional (2D) atomic localization is theoretically investigated via tunable surface plasmon polaritons (SPPs), generated on the metal (Ag) surface coupled to a quantum coherent three-level \(\lambda\)-type medium (\(^{87}\)Rb) embedded as a dielectric host. Such a useful scheme for highly precise atomic localization is reported by using the absorption spectrum of SPPs. Owing to space-dependent light–matter interaction, the sharp localized peaks are observed in a single wavelength domain of 2D space with maximum probability. By properly varying the system parameters, the precision and numbers of the localized peaks are controlled. Consequently, highly efficient and high-resolution atomic localization can be achieved in a region smaller than \(\lambda /20\times \lambda /20\). The spatial resolution of atomic localization is greatly improved as compared to the previously studied cases. These results may have potential useful applications in the fields of quantum nanoplasmonics, nanolithography, and nanophotonics.

     

Gain-Assisted Propagation and Angular Response of Surface Plasmon Resonance in Nonlinear Kretschmann Configuration

The present study investigates the optical characteristics and angular response of gain-assisted surface plasmon resonance incorporating a nonlinear Kretschmann configuration. Nonlinear susceptibility of two-level atoms is used to describe the gain and nonlinear characteristics of amplifying medium. The structure is investigated and compared in both linear and nonlinear regimes. Our theory presents surface plasmon polaritons (SPPs) amplification accounting for saturation of linear gain by nonlinear losses. Reflectivity curve of the Kretschamnn configuration, attenuation constant, propagation length, and magnetic field intensity of plasmonic wave at the interface provide direct proofs of saturated gain induced by nonlinear absorption loss. Linear analysis predicts enhanced total reflection (ETR) in the presence of gain while in nonlinear regime, no ETR phenomenon occurs due to nonlinear loss absorption. Our analysis verifies that in the presence of nonlinear absorption loss, a saturation tendency of propagation length and plasmonic intensity is inevitable which is coincident with the practical observations.     

Coupling Efficiency of Surface Plasmon Polaritons for 1D Plasmonic Gratings: Role of Under- and Over-Milling

This paper reports the successful excitation of surface plasmon polaritons (SPPs) through 1D metallic grating on higher refractive index GaP substrate. Coupling efficiency (η) of a free-space transverse-magnetic (TM) plane-wave mode into a SPP mode is crucial for many plasmonic devices. This η predominantly depends on the fabrication (milling) parameters and the factors (under- and over-milling) affecting the η is investigated experimentally and numerically. First of all, η is estimated by measuring the transmission spectra obtained through the plasmonic grating structures by varying the slit width (a) for a fixed period (Λ) and the thickness (t) of the gold (Au) film in which the grating is formed. The wave vector of the incident light is tuned to match the wave vector of the SPP, to get maximum η. For an optimum Au film thickness, a slit width of half of the periodicity of 770 nm in the grating device yields a maximum η. Such grating devices support only a fundamental plasmonic mode because the profile/shape of the slit in the grating device is more like a sinusoidal nature. Furthermore, such grating offers intermediate scattering to the incident light and the SPP as well which in-truns couple more incident energy to the SPPs. Moreover, over-milling results in decreased η where the crystalline plane of the substrate is disturbed. Finite element method (FEM) in COMSOL modeling is used to understand the underlying physics. This study is very useful for the development of the device application in real word.     

Propagation Properties of Nanoscale Three-Dimensional Plasmonic Waveguide Based on Hybrid of Two Fundamental Planar Optical Metal Waveguides

In this paper, a nanoscale three-dimensional plasmonic waveguide (TDPW), created by depositing an Ag stripe on a SiO₂ layer with an Ag substrate, is introduced and theoretically investigated at visible and telecom wavelengths. By applying the effective index method and finite-difference time-domain numerical simulations, the authors find that the propagation properties of surface plasmon polaritons (SPPs) in the TDPW, including the propagation length and beam width, are mainly decided by the core (the SiO₂ layer just under the Ag stripe) itself, due to the much stronger localization of SPPs in the core than in the two side claddings (the SiO₂ layer without the covered Ag stripe). And propagating SPPs in the TDPW are strongly confined in the core region, even with a very small waveguide cross section. Furthermore, based on the stronger localization of propagation SPPs in the TDPW, two kinds of bending waveguides, oblique bending and 90° circular bending waveguides, are also investigated. For wavelength of 1550 nm, the 90° circular bending guide with a minimum radius as small as 2.6 μm show nearly zero radiation loss, even with a small waveguide cross section of 70?×?80 nm². The proposed TDPW is suitable for planar integration and provides a possible way for constructing various nanoscale counterparts of conventional integrated devices such as splitter, resonator, sensor, and optical switch.     

New Gold Nanoparticles Adhesion Process Opening the Way of Improved and Highly Sensitive Plasmonics Technologies

Gold nanostructures have very suitable physical properties for plasmonic applications but do not stick on glass substrates. One usually uses a chromium adhesion layer that gives good mechanical adhesion but quench the plasmon. We developed a new adhesion process that permits a covalent bonding between gold and glass thanks to an MPTMS molecular layer throughout nanolithography process. We demonstrate that this new adhesion layer allows an improvement of the optical properties of the gold nanoparticles as well as an essential improvement of their surface-enhanced Raman scattering performances.     

Plasmon Nanofocusing with Negative Refraction in a High-Index Dielectric Wedge

Here, we describe a metal-insulator-insulator nanofocusing structure formed by a high-permittivity dielectric wedge on a metal substrate. The structure is shown to produce nanofocusing of surface plasmon polaritons (SPPs) in the direction opposite to the taper of the wedge, including a range of nanoplasmonic effects such as nanofocusing of SPPs with negative refraction, formation of plasmonic caustics within a nanoscale distance from the wedge tip, mutual transformation of SPP modes, and significant local field enhancements in the adiabatic and strongly nonadiabatic regimes. A combination of approximate analytical and rigorous numerical approaches is used to analyze the strength and position of caustics in the structure. In particular, it is demonstrated that strong SPP localization within spatial regions as small as a few tens of nanometers near the caustic is achievable in the considered structures. Contrary to other nanofocusing configurations, efficient nanofocusing is shown to occur in the strongly nonadiabatic regime with taper angles of the dielectric wedge as large as ～40° and within uniquely short distances (as small as a few dozens of nanometers) from the tip of the wedge. Physical interpretations of the obtained results are also presented and discussed.