Thermodynamic and structural properties of the specific binding between Ag ion and C:C mismatched base pair in duplex DNA to form C–Ag–C metal-mediated base pair

Metal ion-nucleic acid interactions have attracted considerable interest for their involvement in structure formation and catalytic activity of nucleic acids. Although interactions between metal ion and mismatched base pair duplex are important to understand mechanism of gene mutations related to heavy metal ions, they have not been well-characterized. We recently found that the Ag⁺ ion stabilized a C:C mismatched base pair duplex DNA. A C–Ag–C metal-mediated base pair was supposed to be formed by the binding between the Ag⁺ ion and the C:C mismatched base pair to stabilize the duplex. Here, we examined specificity, thermodynamics and structure of possible C–Ag–C metal-mediated base pair. UV melting indicated that only the duplex with the C:C mismatched base pair, and not of the duplexes with the perfectly matched and other mismatched base pairs, was specifically stabilized on adding the Ag⁺ ion. Isothermal titration calorimetry demonstrated that the Ag⁺ ion specifically bound with the C:C base pair at 1:1 molar ratio with a binding constant of 10⁶ M⁻¹, which was significantly larger than those for nonspecific metal ion-DNA interactions. Electrospray ionization mass spectrometry also supported the specific 1:1 binding between the Ag⁺ ion and the C:C base pair. Circular dichroism spectroscopy and NMR revealed that the Ag⁺ ion may bind with the N3 positions of the C:C base pair without distorting the higher-order structure of the duplex. We conclude that the specific formation of C–Ag–C base pair with large binding affinity would provide a binding mode of metal ion-DNA interactions, similar to that of the previously reported T-Hg-T base pair. The C–Ag–C base pair may be useful not only for understanding of molecular mechanism of gene mutations related to heavy metal ions but also for wide variety of potential applications of metal-mediated base pairs in various fields, such as material, life and environmental sciences.     

The salt-dependence of a protein-ligand interaction: ion-protein binding energetics

Using the binding of a nucleotide inhibitor (guanosine-3'-monophosphate) to a ribonuclease (ribonuclease Sa) as a model system, we show that the salt-dependence of the interaction arises due to specific ion binding at the site of nucleotide binding. The presence of specific ion-protein binding is concluded from a combination of differential scanning calorimetry and NMR data. Isothermal titration calorimetry data are then fit to determine the energetic profile (enthalpy, entropy, and heat capacity) for both the ion-protein and nucleotide-protein interactions. The results provide insight into the energetics of charge-charge interactions, and have implications for the interpretation of an observed salt-dependence. Further, the presence of specific ion-binding leads to a system behavior as a function of temperature that is drastically different from that predicted from Poisson-Boltzmann calculations.     

Quantitative evaluation of metal ion binding to PvuII restriction endonuclease

19 F NMR spectroscopy have been applied to evaluate metal ion binding by the representative PvuII endonuclease in the absence of substrate. In separate experiments, ITC data demonstrate that PvuII endonuclease binds 2.16 Mn(II) ions and 2.05 Ca(II) metal ions in each monomer active site with K _d values of  ≈ 1 mM. While neither calorimetry nor protein NMR spectroscopy is directly sensitive to Mg(II) binding to the enzyme, Mn(II) competes with Mg(II) for common sites(s) on PvuII endonuclease. Substitution of the conserved active site carboxylate Glu68 with Ala resulted in a loss of affinity for both equivalents of both Ca(II) and Mn(II). Interestingly, the active site mutant D58A retained an affinity for Mn(II) with K _d  ≈ 2 mM. Mn(II) paramagnetic broadening in ¹⁹F spectra of wild-type and mutant 3-fluorotyrosine PvuII endonucleases are consistent with ITC results. Chemical shift analysis of 3-fluorotyrosine mutant enzymes is consistent with a perturbed conformation for D58A. Therefore, free PvuII endonuclease binds metal ions, and metal ion binding can precede DNA binding. Further, while Glu68 is critical to metal ion binding, Asp58 does not appear to be critical to the binding of at least one metal ion and appears to also have a role in structure. These findings provide impetus for exploring the roles of multiple metal ions in the structure and function of this representative endonuclease. Received: 30 March 1999 / Accepted: 28 September 1999     

Ni2+-binding RNA motifs with an asymmetric purine-rich internal loop and a G-A base pair.

RNA molecules with high affinity for immobilized Ni2+ were isolated from an RNA pool with 50 randomized positions by in vitro selection-amplification. The selected RNAs preferentially bind Ni2+ and Co2+ over other cations from first series transition metals. Conserved structure motifs, comprising about 15 nt, were identified that are likely to represent the Ni2+ binding sites. Two conserved motifs contain an asymmetric purine-rich internal loop and probably a mismatch G-A base pair. The structure of one of these motifs was studied with proton NMR spectroscopy and formation of the G-A pair at the junction of helix and internal loop was demonstrated. Using Ni2+ as a paramagnetic probe, a divalent metal ion binding site near this G-A base pair was identified. Ni2+ ions bound to this motif exert a specific stabilization effect. We propose that small asymmetric purine-rich loops that contain a G-A interaction may represent a divalent metal ion binding site in RNA.     

Synthesis and characterization of a water-soluble affinity polymer for trypsin purification

A specific ligand bound polymer has been synthesized for the purpose of purification and stabilization of trypsin, an easily autodigestible enzyme. The affinity polymer was formed by copolymerizing N-acryloyl-m-aminobenzamidine, a strong trypsin inhibitor, and acrylamide in the absence of oxygen. Kinetic studies on the trypsin inhibition revealed that there was a strong binding between this enzyme and the polymer and the mechanism was of a competitive manner with an inhibition constant of 0.6 x 10(-3)M. Such an affinity polymer was also very effective in preventing trypsin from auto-digestion at 4 degrees C.Based on this finding and the principle of cross flow filtration, a new process has been developed for purification of trypsin from a solution containing chymotrypsin. The experimental data indicated that trypsin was bound to the polymer (MW > 10(5)) and remained in the retentate while unbound chymotrypsin was collected in the filtrate. This purification process has a capability of recovering 98% pure trypsin at 90% yield.     

Binding of metal ions toE. coli RNase HI observed by1H−15N heteronuclear 2D NMR

Summary The divalent metal ion binding site and binding constant of ribonuclease HI fromEscherichia coli were investigated by observing chemical shift changes using¹H–¹⁵N heteronuclear NMR. Chemical shift changes were monitored during the titration of the enzyme with salts of the divalent cations. The enzyme was uniformly labeled by¹⁵N, which facilitated the monitoring of the chemical shift change of each cross peak between the backbone amide proton and the amide¹⁵N. The chemical shifts of several amide groups were affected upon the addition of a divalent metal ion: Mg²⁺, Ca²⁺, or Ba²⁺. These amide groups resided close to the active site, consistent with the previous X-ray crystallographic studies. From the titration analysis, a single divalent ion binding site was observed with a weak binding constant (K_D=2–4 mM for the current divalent ions).     

Structural determinants of trypsin affinity and specificity for cationic inhibitors

The binding free energies of four inhibitors to bovine beta-trypsin are calculated. The inhibitors use either ornithine, lysine, or arginine to bind to the S1 specificity site. The electrostatic contribution to binding free energy is calculated by solving the finite difference Poisson-Boltzmann equation, the contribution of nonpolar interactions is calculated using a free energy-surface area relationship and the loss of conformational entropy is estimated both for trypsin and ligand side chains. Binding free energy values are of a reasonable magnitude and the relative affinity of the four inhibitors for trypsin is correctly predicted. Electrostatic interactions are found to oppose binding in all cases. However, in the case of ornithine- and lysine-based inhibitors, the salt bridge formed between their charged group and the partially buried carboxylate of Asp189 is found to stabilize the complex. Our analysis reveals how the molecular architecture of the trypsin binding site results in highly specific recognition of substrates and inhibitors. Specifically, partially burying Asp189 in the inhibitor-free enzyme decreases the penalty for desolvation of this group upon complexation. Water molecules trapped in the binding interface further stabilize the buried ion pair, resulting in a favorable electrostatic contribution of the ion pair formed with ornithine and lysine side chains. Moreover, all side chains that form the trypsin specificity site are partially buried, and hence, relatively immobile in the inhibitor-free state, thus reducing the entropic cost of complexation. The implications of the results for the general problem of recognition and binding are considered. A novel finding in this regard is that like charged molecules can have electrostatic contributions to binding that are more favorable than oppositely charged molecules due to enhanced interactions with the solvent in the highly charged complex that is formed.     

Ligand binding and thermodynamic stability of a multidomain protein, calmodulin

Chemical and thermal denaturation of calmodulin has been monitored spectroscopically to determine the stability for the intact protein and its two isolated domains as a function of binding of Ca2+ or Mg2+. The reversible urea unfolding of either isolated apo-domain follows a two-state mechanism with relatively low deltaG(o)20 values of approximately 2.7 (N-domain) and approximately 1.9 kcal/mol (C-domain). The apo-C-domain is significantly unfolded at normal temperatures (20-25 degrees C). The greater affinity of the C-domain for Ca2+ causes it to be more stable than the N-domain at [Ca2+] > or = 0.3 mM. By contrast, Mg2+ causes a greater stabilization of the N- rather than the C-domain, consistent with measured Mg2+ affinities. For the intact protein (+/-Ca2+), the bimodal denaturation profiles can be analyzed to give two deltaG(o)20 values, which differ significantly from those of the isolated domains, with one domain being less stable and one domain more stable. The observed stability of the domains is strongly dependent on solution conditions such as ionic strength, as well as specific effects due to metal ion binding. In the intact protein, different folding intermediates are observed, depending on the ionic composition. The results illustrate that a protein of low intrinsic stability is liable to major perturbation of its unfolding properties by environmental conditions and liganding processes and, by extension, mutation. Hence, the observed stability of an isolated domain may differ significantly from the stability of the same structure in a multidomain protein. These results address questions involved in manipulating the stability of a protein or its domains by site directed mutagenesis and protein engineering.     

M42 aminopeptidase catalytic site: the structural and functional role of a strictly conserved aspartate residue

The M42 aminopeptidases are a family of dinuclear aminopeptidases widely distributed in Prokaryotes. They are potentially associated to the proteasome, achieving complete peptide destruction. Their most peculiar characteristic is their quaternary structure, a tetrahedron-shaped particle made of twelve subunits. The catalytic site of M42 aminopeptidases is defined by seven conserved residues. Five of them are involved in metal ion binding which is important to maintain both the activity and the oligomeric state. The sixth conserved residue, a glutamate, is the catalytic base deprotonating the water molecule during peptide bond hydrolysis. The seventh residue is an aspartate whose function remains poorly understood. This aspartate residue, however, must have a critical role as it is strictly conserved in all MH clan enzymes. It forms some kind of catalytic triad with the histidine residue and the metal ion of the M2 binding site. We assess its role in TmPep1050, an M42 aminopeptidase of Thermotoga maritima, through a mutational approach. Asp-62 was substituted with alanine, asparagine, or glutamate residue. The Asp-62 substitutions completely abolished TmPep1050 activity and impeded dodecamer formation. They also interfered with metal ion binding as only one cobalt ion is bound per subunit instead of two. The structure of Asp62Ala variant was solved at 1.5 Å showing how the substitution has an impact on the active site fold. We propose a structural role for Asp-62, helping to stabilize a crucial loop in the active site and to position correctly the catalytic base and a metal ion ligand of the M1 site.     

Diffusion of bovine serum albumin in a neutral polymer solution

The diffusion coefficient D of bovine serum albumin through various solutions (pH 7.0, 0.5M NaCl) of polythylene oxide (M_w ～ 1 × 10⁵, 3 × 10⁵) was studied with quasielastic light scattering. In solutions of the 1 × 10⁵ polymer solution at polymer concentrations above 0.5 g/L, D is considerably greater than would have been expected from the viscosity of water:polymer mixtures, the deviations being larger at low protein concentration that at high protein concentration. With either polymer, D falls with increasing protein concentration.     

An examination of the binding behavior of histidine-containing peptides with immobilized metal complexes derived from the macrocyclic ligand, 1,4,7-triazacyclononane

In this study, two different experimental approaches have been employed to examine the binding behavior of histidine-containing peptides with metal ion complexes derived from the macrocyclic ligand 1,4,7-triazacyclononane (tacn). Firstly, a molecular modeling approach has been employed to derive the strain energies for test peptide sequences that have a predicted propensity to readily adopt an α-helical conformation. To this end, binuclear metal complexes were examined with peptides containing two histidine residues in different locations in a pair of peptides of the same composition but different sequence. These modeling results indicate that there are no energetic constraints for two-point binding to occur with dicopper(II) binuclear complexes when two histidine residues are appropriately placed in an α-helical conformation. Secondly, binding experiments were carried out to establish the effect of one or more histidine residues within a peptide sequence on the affinity of a peptide for these Cu(II)–tacn derived binuclear complexes when immobilized onto a chromatographic support material. The results confirm that for all chelating systems, higher affinity is achieved as the histidine number in the peptide structure increases, although the relative location of the histidine residues in these small peptides did not introduce a significant constraint to the conformation on interacting with the immobilized Cu(II) binuclear complexes.     

Synthesis of a polymer skeleton at the inner leaflet of liposomal membranes: polymerization of membrane-adsorbed pH-sensitive monomers

We describe the synthesis of liposomes with an artificial membrane skeleton as a model of the native cellular cytoskeleton. Similar to natural conditions, a flat polymer network is coupled to the inner membrane leaflet like a suspended ceiling via membrane-inserted anchor monomers with a spacer. The polymer is composed of DMAPMA (N-(3-N,N-dimethylaminopropyl) methacrylamide) and TEGDM (tetraethylene glycol dimethacrylate) as a linker and is coupled to the membrane anchor DOGM (1,2-distearyl-3-octaethylene glycol glycerol ether methacrylate). In the first step of the synthesis, DMAPMA and TEGDM are encapsulated into liposomes composed of egg phosphatidylcholine (EPC), and free monomers are removed by gel chromatography. At pH 10, DMAPMA adsorbs to the inner membrane surface, as demonstrated in parallel studies with lipid monolayers using a Langmuir film balance. The polymerization by UV irradiation was initiated with DEAP (2,2-diethoxyacetophenone) as the initiator and was shown to be complete after 15 min. At pH 6, polymer was desorbed from the inner membrane surface to form a lamellar structure similar to that of the cellular cytoskeleton, as shown by electron microscopy. In comparison to NIPAM (N-isopropylacrylamide), which was used as a monomer in a recent study (Stauch, O.; Uhlmann, T.; Frohlich, M.; Thomann, R.; El-Badry, M.; Kim, Y.-K.; Schubert, R. Biomacromolecules 2002, 3, 324-32), DMAPMA shows much slower membrane permeation leading to an essential restriction of the formed polymer to the liposomal interior. The DMAPMA-based composite structure stabilizes the lipid membrane against sodium cholate by a factor of 2.5 as compared to plain EPC liposomes. This is discussed in the context of the situation in the liver, where the cytoskeleton probably plays a crucial role in the stabilization of the membrane against high bile salt concentration.     

评论：塑料结合模块促进聚对苯二甲酸乙二醇酯的酶法降解

塑料的大量生产和无节制的使用已造成严重的环境污染。为了减少塑料废物对环境的影响,近年来塑料酶法降解已成为国内外研究者关注的热点。例如,通过蛋白质工程策略提高塑料降解酶催化活性和热稳定性,进一步提高酶法降解的效率。另外,通过融合酶策略将塑料结合模块与塑料降解酶融合,也可以促进塑料降解。近期发表在期刊Chem Catalysis的一项研究表明,采用碳水化合物结合模块融合策略可以在低浓度(<10 wt%)的底物聚对苯二甲酸乙二醇酯[poly(ethylene terephthalate),PET]中提高塑料降解酶的活性。但是在高浓度底物(10 wt%−20 wt%)中,该策略无法提高PET的酶法降解。该项研究对于采用塑料结合模块促进酶法降解塑料具有重要的指导意义。     

Probing metal ion binding and conformational properties of the colicin E9 endonuclease by electrospray ionization time-of-flight mass spectrometry

Nano-electrospray ionization time-of-flight mass spectrometry (ESI-MS) was used to study the conformational consequences of metal ion binding to the colicin E9 endonuclease (E9 DNase) by taking advantage of the unique capability of ESI-MS to allow simultaneous assessment of conformational heterogeneity and metal ion binding. Alterations of charge state distributions on metal ion binding/release were correlated with spectral changes observed in far- and near-UV circular dichroism (CD) and intrinsic tryptophan fluorescence. In addition, hydrogen/deuterium (H/D) exchange experiments were used to probe structural integrity. The present study shows that ESI-MS is sensitive to changes of the thermodynamic stability of E9 DNase as a result of metal ion binding/release in a manner consistent with that deduced from proteolysis and calorimetric experiments. Interestingly, acid-induced release of the metal ion from the E9 DNase causes dramatic conformational instability associated with a loss of fixed tertiary structure, but secondary structure is retained. Furthermore, ESI-MS enabled the direct observation of the noncovalent protein complex of E9 DNase bound to its cognate immunity protein Im9 in the presence and absence of Zn(2+). Gas-phase dissociation experiments of the deuterium-labeled binary and ternary complexes revealed that metal ion binding, not Im9, results in a dramatic exchange protection of E9 DNase in the complex. In addition, our metal ion binding studies and gas-phase dissociation experiments of the ternary E9 DNase-Zn(2+)-Im9 complex have provided further evidence that electrostatic interactions govern the gas phase ion stability.     

The charge state of an ion channel controls neutral polymer entry into its pore

Electrostatic potentials created by fixed or induced charges regulate many cellular phenomena including the rate of ion transport through proteinaceous ion channels. Nanometer-scale pores of these channels also play a critical role in the transport of charged and neutral macromolecules. We demonstrate here that, surprisingly, changing the charge state of a channel markedly alters the ability of nonelectrolyte polymers to enter the channel's pore. Specifically, we show that the partitioning of differently-sized linear nonelectrolyte polymers of ethylene glycol into the Staphylococcus aureus α-hemolysin channel is altered by the solution pH. Protonating some of the channel side chains decreases the characteristic polymer size (molecular weight) that can enter the pore by ∼25% but increases the ionic current by ∼15%. Thus, the “steric” and “electric” size of the channel change in opposite directions. The results suggest that effects due to polymer and channel hydration are crucial for polymer transport through such pores. Received: 16 March 1997 / Accepted: 24 April 1997     

Structural and biochemical characterization of a new Mg(2+) binding site near Tyr94 in the restriction endonuclease PvuII

We have determined the crystal structure of the PvuII endonuclease in the presence of Mg(2+). According to the structural data, divalent metal ion binding in the PvuII subunits is highly asymmetric. The PvuII-Mg(2+) complex has two distinct metal ion binding sites, one in each monomer. One site is formed by the catalytic residues Asp58 and Glu68, and has extensive similarities to a catalytically important site found in all structurally examined restriction endonucleases. The other binding site is located in the other monomer, in the immediate vicinity of the hydroxyl group of Tyr94; it has no analogy to metal ion binding sites found so far in restriction endonucleases. To assign the number of metal ions involved and to better understand the role of Mg(2+) binding to Tyr94 for the function of PvuII, we have exchanged Tyr94 by Phe and characterized the metal ion dependence of DNA cleavage of wild-type PvuII and the Y94F variant. Wild-type PvuII cleaves both strands of the DNA in a concerted reaction. Mg(2+) binding, as measured by the Mg(2+) dependence of DNA cleavage, occurs with a Hill coefficient of 4, meaning that at least two metal ions are bound to each subunit in a cooperative fashion upon formation of the active complex. Quenched-flow experiments show that DNA cleavage occurs about tenfold faster if Mg(2+) is pre-incubated with enzyme or DNA than if preformed enzyme-DNA complexes are mixed with Mg(2+). These results show that Mg(2+) cannot easily enter the active center of the preformed enzyme-DNA complex, but that for fast cleavage the metal ions must already be bound to the apoenzyme and carried with the enzyme into the enzyme-DNA complex. The Y94F variant, in contrast to wild-type PvuII, does not cleave DNA in a concerted manner and metal ion binding occurs with a Hill coefficient of 1. These results indicate that removal of the Mg(2+) binding site at Tyr94 completely disrupts the cooperativity in DNA cleavage. Moreover, in quenched-flow experiments Y94F cleaves DNA about ten times more slowly than wild-type PvuII, regardless of the order of mixing. From these results we conclude that wild-type PvuII cleaves DNA in a fast and concerted reaction, because the Mg(2+) required for catalysis are already bound at the enzyme, one of them at Tyr94. We suggest that this Mg(2+) is shifted to the active center during binding of a specific DNA substrate. These results, for the first time, shed light on the pathway by which metal ions as essential cofactors enter the catalytic center of restriction endonucleases.     

The influence of glucan polymer structure and solution conformation on binding to (1-->3)-beta-D-glucan receptors in a human monocyte-like cell line

Glucans are (1-3)-beta-D-linked polymers of glucose that are produced as fungal cell wall constituents and are also released into the extracellular milieu. Glucans modulate immune function via macrophage participation. The first step in macrophage activation by (1-3)-beta-D-glucans is thought to be the binding of the polymer to specific macrophage receptors. We examined the binding/uptake of a variety of water soluble (1-3)-beta-D-glucans and control polymers with different physicochemical properties to investigate the relationship between polymer structure and receptor binding in the CR3- human promonocytic cell line, U937. We observed that the U937 receptors were specific for (1-->3)-beta-D-glucan binding, since mannan, dextran, or barley glucan did not bind. Scleroglucan exhibited the highest binding affinity with an IC(50)of 23 nM, three orders of magnitude greater than the other (1-->3)-beta-D-glucan polymers examined. The rank order competitive binding affinities for the glucan polymers were scleroglucan>schizophyllan > laminarin > glucan phosphate > glucan sulfate. Scleroglucan also exhibited a triple helical solution structure (nu = 1.82, beta = 0.8). There were two different binding/uptake sites on U937 cells. Glucan phosphate and schizophyllan interacted nonselectively with the two sites. Scleroglucan and glucan sulfate interacted preferentially with one site, while laminarin interacted preferentially with the other site. These data indicate that U937 cells have at least two non-CR3 receptor(s) which specifically interact with (1-->3)-beta-D-glucans and that the triple helical solution conformation, molecular weight and charge of the glucan polymer may be important determinants in receptor ligand interaction.     

Differentiation of the slow-binding mechanism for magnesium ion activation and zinc ion inhibition of human placental alkaline phosphatase

The binding mechanism of Mg(2+) at the M3 site of human placental alkaline phosphatase was found to be a slow-binding process with a low binding affinity (K(Mg(app.)) = 3.32 mM). Quenching of the intrinsic fluorescence of the Mg(2+)-free and Mg(2+)-containing enzymes by acrylamide showed almost identical dynamic quenching constant (K(sv) = 4.44 +/- 0.09 M(-1)), indicating that there is no gross conformational difference between the M3-free and the M3-Mg(2+) enzymes. However, Zn(2+) was found to have a high affinity with the M3 site (K(Zn(app.)) = 0.11 mM) and was observed as a time-dependent inhibitor of the enzyme. The dependence of the observed transition rate from higher activity to lower activity (k(obs)) at different zinc concentrations resulted in a hyperbolic curve suggesting that zinc ion induces a slow conformational change of the enzyme, which locks the enzyme in a conformation (M3'-Zn) having an extremely high affinity for the Zn(2+) (K*(Zn(app.)) = 0.33 microM). The conformation of the M3'-Zn enzyme, however, is unfavorable for the catalysis by the enzyme. Both Mg(2+) activation and Zn(2+) inhibition of the enzyme are reversible processes. Structural information indicates that the M3 site, which is octahedrally coordinated to Mg(2+), has been converted to a distorted tetrahedral coordination when zinc ion substitutes for magnesium ion at the M3 site. This conformation of the enzyme has a small dynamic quenching constant for acrylamide (K(sv) = 3.86 +/- 0.04 M(-1)), suggesting a conformational change. Both Mg(2+) and phosphate prevent the enzyme from reaching this inactive structure. GTP plays an important role in reactivating the Zn-inhibited enzyme activity. We propose that, under physiological conditions, magnesium ion may play an important modulatory role in the cell for protecting the enzyme by retaining a favorable geometry of the active site needed for catalysis.     

Identifying the characteristic secondary ions of lignin polymer using ToF-SIMS

The chemical structure of lignin, a complex, irregular polymer of phenylpropane units that occurs in plant cell walls, was investigated using time-of-flight secondary ion mass spectrometry (ToF-SIMS). The positive ToF-SIMS spectra of lignin isolated from pine and beech wood showed prominent secondary ions possessing guaiacyl (at m/z 137 and 151) or syringyl (at m/z 167 and 181) rings, which are the basic building units of lignin polymer. This shows that ToF-SIMS is a useful tool for lignin structural analysis. The peaks at m/z 137 and 167 were assigned as the C6-C1 ion, and the peaks at m/z 151 and 181 may be double-component, the C6-C1 ion and the C6-C2 ion. We confirmed the characteristic guaiacyl ions using a synthetic lignin model compound, dehydrogenation polymer (DHP), which was formed by polymerizing of unlabeled and deuterium-labeled coniferyl alcohols. The formation mechanism of the main secondary ions was deduced by labeling specific positions of coniferyl alcohols with a stable isotope to study the relationship between chemical structure and secondary ion formation in ToF-SIMS.