AFLP: a new technique for DNA fingerprinting.

A novel DNA fingerprinting technique called AFLP is described. The AFLP technique is based on the selective PCR amplification of restriction fragments from a total digest of genomic DNA. The technique involves three steps: (i) restriction of the DNA and ligation of oligonucleotide adapters, (ii) selective amplification of sets of restriction fragments, and (iii) gel analysis of the amplified fragments. PCR amplification of restriction fragments is achieved by using the adapter and restriction site sequence as target sites for primer annealing. The selective amplification is achieved by the use of primers that extend into the restriction fragments, amplifying only those fragments in which the primer extensions match the nucleotides flanking the restriction sites. Using this method, sets of restriction fragments may be visualized by PCR without knowledge of nucleotide sequence. The method allows the specific co-amplification of high numbers of restriction fragments. The number of fragments that can be analyzed simultaneously, however, is dependent on the resolution of the detection system. Typically 50-100 restriction fragments are amplified and detected on denaturing polyacrylamide gels. The AFLP technique provides a novel and very powerful DNA fingerprinting technique for DNAs of any origin or complexity.     

Amplified fragment length polymorphism (AFLP): a review of the procedure and its applications

Amplified fragment length polymorphism (AFLP) is a novel molecular fingerprinting technique that can be applied to DNAs of any source or complexity. Total genomic DNA is digested using two restriction enzymes. Double-stranded nucleotide adapters are ligated to the DNA fragments to serve as primer binding sites for PCR amplification. Primers complementary to the adapter and restriction site sequence, with additional nucleotides at the 3′-end, are used as selective agents to amplify a subset of ligated fragments. Polymorphisms are identified by the presence or absence of DNA fragments following analysis on polyacrylamide gels. This technique has been extensively used with plant DNA for the development of high-resolution genetic maps and for the positional cloning of genes of interest. However, its application is rapidly expanding in bacteria and higher eukaryotes for determining genetic relationships and for epidemiological typing. This review describes the AFLP procedure, and recent, novel applications in the molecular fingerprinting of DNA from both eukaryotic and prokaryotic organisms. Received 19 December 1997/ Accepted in revised form 3 June 1998     

AFLP分子标记技术及其在动物学研究中的应用

扩增片段长度多态性技术(AFLP)基于选择性扩增完全酶切消化后的基因组DNA片段,包括酶切与连接、选择性扩增、检测分析等3个步骤。该技术的运用不需要预知基因组的序列特征,具有较高的多态分辨力,产生的标记是显性标记,可适用于任何来源和各种复杂度的DNA。自AFLP技术问世以来,在酶切、扩增体系、检测和分析方法等方面不断得到改进。本文将以线虫、昆虫、鱼类、鸟类、家畜、鼠、人等为例,介绍近年来AHLP技术在动物或人的遗传图谱构建和QTL(quantitative trait loci)定位、生物多样性、性别决定和繁殖行为研究、疾病及疾病诊断研究等上的应用。     

Linear amplification for deep sequencing

Linear amplification for deep sequencing (LADS) is an amplification method that produces representative libraries for Illumina next-generation sequencing within 2 d. The method relies on attaching two different sequencing adapters to blunt-end repaired and A-tailed DNA fragments, wherein one of the adapters is extended with the sequence for the T7 RNA polymerase promoter. Ligated and size-selected DNA fragments are transcribed in vitro with high RNA yields. Subsequent cDNA synthesis is initiated from a primer complementary to the first adapter, ensuring that the library will only contain full-length fragments with two distinct adapters. Contrary to the severely biased representation of AT- or GC-rich fragments in standard PCR-amplified libraries, the sequence coverage in T7-amplified libraries is indistinguishable from that of nonamplified libraries. Moreover, in contrast to amplification-free methods, LADS can generate sequencing libraries from a few nanograms of DNA, which is essential for all applications in which the starting material is limited.     

Fingerprinting of bacterial genomes by amplification of DNA fragments surrounding rare restriction sites.

A method for generating limited representations of total bacterial DNA, without prior knowledge of the DNA sequence, has been developed. This method consists of three steps: digestion with two restriction enzymes, ligation of two oligonucleotide adapters corresponding to the restriction sites, and selective PCR amplification of the ligation products. The method relies on the use of two restriction enzymes with considerable differences in cleavage frequency of the investigated DNA and the ligation of two different oligonucleotides, each corresponding to one of the two cohesive ends of DNA fragments. Three subsets of DNA fragments are generated during digestion and subsequent ligation: terminated with the same oligonucleotide on both 5' ends of DNA fragments (two subsets) and terminated with two different oligonucleotides. Suppression PCR allows only the third subset of DNA fragments to be amplified exponentially. The method allows bacterial species strain differentiation on the basis of the different DNA band patterns obtained after electrophoresis in polyacrylamide gels stained with ethidium bromide and visualized in UV light.     

Single-enzyme amplified fragment length polymorphism and its applicability for Salmonella epidemiology

Amplified fragment length polymorphism (AFLP) is a PCR-based DNA fingerprinting technique whereby restriction fragments may be visualized without prior knowledge of nucleotide sequences. In AFLP analysis, bacterial genomic DNA is digested with a restriction enzyme and ligated to adapter oligonucleotides. A subset of DNA fragments are then amplified using primers which contain adapter-defined sequences. Selective amplification is achieved by the use of primers containing adapter-defined sequences with one additional arbitrary nucleotide. We used four primers complementary to the adapter sequence, but each differing in the final 3' base that extended into the fragment DNA. The usefulness of these primers for fingerprinting Salmonella enterica was assessed in a hierarchical manner. Using a single-enzyme approach (SAFLP) we have used this method to fingerprint 30 strains of S. enterica, belonging to 14 different serotypes. SAFLP profiles derived from Hind III fragments differentiated between the serotypes. In addition, SAFLP profiles for each serotype differentiated between the phage types and individual strains. The technique is significantly faster to perform than other DNA-based methods and has given reproducible and discriminatory results. This hierarchical SAFLP technique may provide a valuable addition to existing methods for the DNA fingerprinting of S. enterica for epidemiological studies.     

应用限制性显示PCR技术构建细菌poly(A)化mRNA的cDNA文库

针对细菌mRNA poly(A)化位点的高度多态性,利用oligo(dT)与poly(A)特异结合的特性,以oligo(dT)一纤维素纯化mRNA,并以oligo(dT)18为引物逆转录合成cDNA,用限制性内切酶消化cDNA,所得的限制性内切酶片段与通用接头相连,通过10个选择性引物组合进行选择性PCR,使各片段得以扩增并分布于10个亚组中,并进行克隆,成功地克隆了100多个基因片段,已对其中40个进行了测序分析,探讨了限制性显示PCR技术在细菌poly(A)化mRNA cDNA库构建中的应用价值。     

Revised selection criteria for candidate restriction enzymes in genome walking

A new method to improve the efficiency of flanking sequence identification by genome walking was developed based on an expanded, sequential list of criteria for selecting candidate enzymes, plus several other optimization steps. These criteria include: step (1) initially choosing the most appropriate restriction enzyme according to the average fragment size produced by each enzyme determined using in silico digestion of genomic DNA, step (2) evaluating the in silico frequency of fragment size distribution between individual chromosomes, step (3) selecting those enzymes that generate fragments with the majority between 100 bp and 3,000 bp, step (4) weighing the advantages and disadvantages of blunt-end sites vs. cohesive-end sites, step (5) elimination of methylation sensitive enzymes with methylation-insensitive isoschizomers, and step (6) elimination of enzymes with recognition sites within the binary vector sequence (T-DNA and plasmid backbone). Step (7) includes the selection of a second restriction enzyme with highest number of recognition sites within regions not covered by the first restriction enzyme. Step (8) considers primer and adapter sequence optimization, selecting the best adapter-primer pairs according to their hairpin/dimers and secondary structure. In step (9), the efficiency of genomic library development was improved by column-filtration of digested DNA to remove restriction enzyme and phosphatase enzyme, and most important, to remove small genomic fragments (<100 bp) lacking the T-DNA insertion, hence improving the chance of ligation between adapters and fragments harbouring a T-DNA. Two enzymes, NsiI and NdeI, fit these criteria for the Arabidopsis thaliana genome. Their efficiency was assessed using 54 T(3) lines from an Arabidopsis SK enhancer population. Over 70% success rate was achieved in amplifying the flanking sequences of these lines. This strategy was also tested with Brachypodium distachyon to demonstrate its applicability to other larger genomes.     

A PCR-based DNA fingerprinting technique: AFLP for molecular typing of bacteria.

Amplified restriction fragment polymorphism (AFLP) is a PCR-based DNA fingerprinting technique. In AFLP analysis, bacterial genomic DNA is digested with restriction enzymes, ligated to adapters, and a subset of DNA fragments are amplified using primers containing 16 adapter defined sequences with one additional arbitrary nucleotide. Polymorphisms of different Escherichia coli strains or Agrobacterium tumefaciens strains were demonstrated as distinct, unique bands in a denaturing sequencing gel using AFLP. The polymorphisms detected between BL21 and BL21F'IQ and between DH5 alpha and DH5 alpha F'IQ strains indicated that AFLP is able to resolve differences in F' episomal DNA (approximately 100 kb).     

Mapping networks of physical interactions between genomic elements using 5C technology

Genomic elements separated by large genomic distances can physically interact to mediate long-range gene regulation and other chromosomal processes. Interactions between genomic elements can be detected using the chromosome conformation capture (3C) technology. We recently developed a high-throughput adaptation of 3C, 3C-carbon copy (5C), that is used to measure networks of millions of chromatin interactions in parallel. As in 3C, cells are treated with formaldehyde to cross-link chromatin interactions. The chromatin is solubilized, digested with a restriction enzyme and ligated at low DNA concentration to promote intra-molecular ligation of cross-linked DNA fragments. Ligation products are subsequently purified to generate a 3C library. The 5C technology then employs highly multiplexed ligation-mediated amplification (LMA) to detect and amplify 3C ligation junctions. The resulting 5C library of ligated primers is analyzed using either microarray detection or ultra-high-throughput DNA sequencing. The 5C protocol described here can be completed in 13 d.     

An A-T linker adapter polymerase chain reaction method for chromosome walking without restriction site cloning bias

A-T linker adapter polymerase chain reaction (PCR) was modified and employed for the isolation of genomic fragments adjacent to a known DNA sequence. The improvements in the method focus on two points. The first is the modification of the PO(4) and NH(2) groups in the adapter to inhibit the self-ligation of the adapter or the generation of nonspecific products. The second improvement is the use of the capacity of rTaq DNA polymerase to add an adenosine overhang at the 3' ends of digested DNA to suppress self-ligation in the digested DNA and simultaneously resolve restriction site clone bias. The combination of modifications in the adapter and in the digested DNA leads to T/A-specific ligation, which enhances the flexibility of this method and makes it feasible to use many different restriction enzymes with a single adapter. This novel A-T linker adapter PCR overcomes the inherent limitations of the original ligation-mediated PCR method such as low specificity and a lack of restriction enzyme choice. Moreover, this method also offers higher amplification efficiency, greater flexibility, and easier manipulation compared with other PCR methods for chromosome walking. Experimental results from 143 Arabidopsis mutants illustrate that this method is reliable and efficient in high-throughput experiments.     

Molecular indexing of human genomic DNA

Molecular indexing sorts DNA fragments into subsets for inter-sample comparisons. Type IIS or interrupted palindrome restriction endonucleases, which result in single-stranded ends not including the original recognition sequence of the enzyme, are used to produce the fragments. The ends can then be any sequence but will always be specific for a given fragment. Fragments with particular ends are selected by ligation to a corresponding indexing adapter. We describe iterative indexing, a new process that after an initial round of indexing uses a Type IIS restriction endonuclease to expose additional sequence for further indexing. New plasmids, pINDnn, were produced for novel use as indexing adapters. Together, the plasmids index all 16 possible dinucleotides. Their large size can be increased by dimerisation in vitro and allows the isolation of indexed material by size separation. Fragments produced from human genomic DNA by Type II restriction endonucleases were sorted using six bases in total to a possible enrichment of 1920-fold. By comparison with the public human sequence databases, fidelity of indexing was shown to be high and was tolerant of repetitive sequences. Genome-wide comparisons on a candidate or non-candidate basis are made possible by this approach.     

An adapter ligation-mediated PCR method for high-throughput mapping of T-DNA inserts in the Arabidopsis genome

Agrobacterium transfer DNA (T-DNA) is an effective plant mutagen that has been used to create sequence-indexed T-DNA insertion lines in Arabidopsis thaliana as a tool to study gene function. Creating T-DNA insertion lines requires a dependable method for locating the site of insertion in the genome. In this protocol, we describe an adapter ligation-mediated PCR method that we have used to screen a mutant library and identify over 150,000 T-DNA insertional mutants; the method can also be applied to map individual mutants. The procedure consists of three steps: a restriction enzyme-mediated ligation of an adapter to the genomic DNA; a PCR amplification of the T-DNA/genomic DNA junction with primers specific to the adapter and T-DNA; and sequencing of the T-DNA/genomic junction to enable mapping to the reference genome. In most cases, the sequenced genomic region extends to the T-DNA border, enabling the exact location of the insert to be identified. The entire process takes 2 weeks to complete.     

Genomic typing of Escherichia coli O157:H7 by semi-automated fluorescent AFLP analysis

Escherichia coli serotype O157:H7 isolates were analyzed using a relatively new DNA fingerprinting method, amplified fragment length polymorphism (AFLP). Total genomic DNA was digested with two restriction endonucleases (EcoRI and MseI), and compatible oligonucleotide adapters were ligated to the ends of the resulting DNA fragments. Subsets of fragments from the total pool of cleaved DNA were then amplified by the polymerase chain reaction (PCR) using selective primers that extended beyond the adapter and restriction site sequences. One of the primers from each set was labeled with a fluorescent dye, which enabled amplified fragments to be detected and sized automatically on an automated DNA sequencer. Three AFLP primer sets generated a total of thirty-seven unique genotypes among the 48 E. coli O157:H7 isolates tested. Prior fingerprinting analysis of large restriction fragments from these same isolates by pulsed-field gel electrophoresis (PFGE) resulted in only 21 unique DNA profiles. Also, AFLP fingerprinting was successful for one DNA sample that was not typable by PFGE, presumably because of template degradation. AFLP analysis, therefore, provided greater genetic resolution and was less sensitive to DNA quality than PFGE. Consequently, this DNA typing technology should be very useful for genetic subtyping of bacterial pathogens in epidemiologic studies.     

Global amplification of cDNA from limiting amounts of tissue. An improved method for gene cloning and analysis

In this study we present an improved polymerase chain reaction (PCR)-based methodology to generate large amounts of high-quality complementary DNA (cDNA) from small amounts of initial total RNA. Global amplification of cDNA makes it possible to simultaneously clone many cDNAs and to construct directional cDNA libraries from a sequence-abundance-normalized cDNA population, and also permits rapid amplification of cDNA ends (RACE), from a limited amount of starting material. The priming of cDNAs with an adapter oligo-deoxythymidine (oligo-dT) primer and the ligation of a modified oligonucleotide to the 3′ end of single-stranded cDNAs, through the use of T4 RNA ligase, generates known sequences on either end of the cDNA population. This helps in the global amplification of cDNAs and in the sequence-abundance normalization of the cDNA population through the use of PCR. Utilization of a long-range PCR enzyme mix to amplify the cDNA population helps to reduce bias toward the preferential amplification of shorter molecules. Incorporation of restriction sites in the PCR primers allows the amplified cDNAs to be directionally cloned into appropriate cloning vectors to generate cDNA libraries. RACE-PCR done with biotinylated primers and streptavidin-coated para-magnetic particles are used for the efficient isolation of either full-length coding or noncoding strands.     

Sensitive and selective amplification of methylated DNA sequences using helper-dependent chain reaction in combination with a methylation-dependent restriction enzymes

We have developed a novel technique for specific amplification of rare methylated DNA fragments in a high background of unmethylated sequences that avoids the need of bisulphite conversion. The methylation-dependent restriction enzyme GlaI is used to selectively cut methylated DNA. Then targeted fragments are tagged using specially designed ‘helper’ oligonucleotides that are also used to maintain selection in subsequent amplification cycles in a process called ‘helper-dependent chain reaction’. The process uses disabled primers called ‘drivers’ that can only prime on each cycle if the helpers recognize specific sequences within the target amplicon. In this way, selection for the sequence of interest is maintained throughout the amplification, preventing amplification of unwanted sequences. Here we show how the method can be applied to methylated Septin 9, a promising biomarker for early diagnosis of colorectal cancer. The GlaI digestion and subsequent amplification can all be done in a single tube. A detection sensitivity of 0.1% methylated DNA in a background of unmethylated DNA was achieved, which was similar to the well-established Heavy Methyl method that requires bisulphite-treated DNA.     

Copy number variations of 11 macronuclear chromosomes and their gene expression in Oxytricha trifallax

Genome-wide methylation studies frequently lack adequate controls to estimate proportions of background reads in the resulting datasets. To generate appropriate control pools, we developed technique termed nMETR (non-methylated tag recovery) based on digestion of genomic DNA with methylation-sensitive restriction enzyme, ligation of adapter oligonucleotide and PCR amplification of non-methylated sites associated with genomic repetitive elements. The protocol takes only two working days to generate amplicons for deep sequencing. We applied nMETR for human DNA using BspFNI enzyme and retrotransposon Alu-specific primers. 454-sequencing enabled identification of 1113 nMETR tag sites, of them ~65% were parts of CpG islands. Representation of reads inversely correlated with methylation levels, thus confirming nMETR fidelity. We created software that eliminates background reads and enables to map and annotate individual tags on human genome. nMETR tags may serve as the controls for large-scale epigenetic studies and for identifying unmethylated transposable elements located close to genomic CpG islands.