海产品中副溶血性弧菌的直接定量法-疏水网格滤膜法

本研究建立了一种疏水网格滤膜法,直接定量检测海产品中的副溶血性弧菌。该方法包括4~5 h复苏步骤以使受损细胞得以修复,然后37℃下在副溶血性弧菌显色培养基上培养过夜后计数。从显色培养基上挑取典型菌落进行确证试验,确证率大于98%。与传统MPN法比较,对经过冷藏、冷冻和热处理的样品进行检测时,新方法检出菌量明显高于MPN法(p0.01)。     

副溶血性弧菌显色培养基检测效果初步评价

副溶血性弧菌(Vibrio parahaemolyticus)是一种重要的食源性致病菌, 广泛存在于各种海产品中。由于传统培养基和检测方法费时费力, 本研究设计开发了一种新型显色培养基HKC vibrio, 通过应用于人工污染样品和实际样品检验, 以法国科玛嘉弧菌显色平板CHROMagar vibrio和柠檬酸钠-硫代硫酸钠-氯化钠-蔗糖琼脂平板(TCBS)为对照, 对显色培养基HKC vibrio的灵敏性、特异性和检测效果进行了初步评价。结果表明, HKC vibrio的灵敏性与CHROMagar vibrio和TCBS相当, 并具有较好的特异性, HKC vibrio是非常有价值的分离平板, 可大大提高副溶血性弧菌的检测效率。     

副溶血性弧菌显色培养基检测效果初步评价

副溶血性弧菌(Vibrio parahaemolyticus)是一种重要的食源性致病菌,广泛存在于各种海产品中.由于传统培养基和检测方法费时费力,本研究设计开发了一种新型显色培养基HKC vibrio,通过应用于人工污染样品和实际样品检验,以法国科玛嘉弧菌显色平板CHROMagar vibrio和柠檬酸钠-硫代硫酸钠-氯化钠-蔗糖琼脂平板(TCBS)为对照,对显色培养基HKC vibrio的灵敏性、特异性和检测效果进行了初步评价.结果表明,HKC vibrio的灵敏性与CHROMagar vibrio和TCBS相当,并具有较好的特异性,HKC vibrio是非常有价值的分离平板,可大大提高副溶血性弧菌的检测效率.     

一种副溶血性弧菌显色培养基的应用

副溶血性弧菌(Vibri oparahemolyticus)是一种在海产品中广泛存在的嗜盐性细菌,也是重要的食源性致病菌。传统检验方法检测周期长、特异性低,为提高检测效率、缩短检测周期,开发出一种副溶血性弧菌显色培养基(HKMVPM),与国外同类产品KHVPM和TCBS在灵敏度、特异性及检测效果方面进行了比较和初步评价。结果显示,HKMVPM显色培养基和KHVPM显色培养基均具有较好的选择性和特异性,这3种培养基对天然污染样品的分离率高低顺序为HKMVPMKHVPMTCBS。显色培养基具有高检出率及高特异性的特点,有良好的应用前景。     

实时荧光PCR检测水产品中副溶血性弧菌

目的探索副溶血性弧菌快速检测法,应用于日常监测及食物中毒的快速查源。方法用副溶血性弧菌实时荧光试剂盒对水产品样本进行检验,以副溶血性弧菌toxR基因为靶序列,设计1对引物和探针,采用热裂解法提取DNA。结果实时荧光PCR从42份水产品样品的增菌液中检出13份样品副溶血性弧菌阳性,与传统培养法相比一致性极好（K=0.943,K〉0.75）。结论实时荧光PCR方法在副溶血性弧菌的检验方面较传统方法具有快速、灵敏、特异性强等优势,具有广阔的应用前景。     

致病性副溶血性弧菌菌落杂交检测体系的优化

对常见食源性致病菌副溶血性弧菌的杂交条件进行了优化。基于副溶血性弧菌的tdh,trh,toxR基因选用了3种探针序列,从菌落杂交样品的预处理方法、杂交时间和显色检测等方面对基于副溶血性弧菌毒力基因的原位杂交实验进行了条件优化。结果表明,采用80℃热固定2 h,37℃预杂交10 min后杂交8 h以及封闭1 h的改良方法可获得高特异性、低背景且着色清晰的实验结果。优化的菌落杂交技术检测副溶血性弧菌与传统检测方法相比,具有高效、准确、可区分致病性菌株的优点,为水产品中副溶血性弧菌致病菌株和非致病菌株的同步检测和筛选提供参考。     

四重PCR检测副溶血性弧菌及其毒力基因方法的建立

【目的】建立同时检测副溶血性弧菌tox R、tdh、trh、tlh基因的四重PCR快速检测方法。【方法】分别以副溶血性弧菌的tox R、tdh、trh、tlh 4个基因为靶基因,设计4对特异性引物,对4对引物浓度和退火温度进行优化,获得最佳引物比例和扩增条件,建立快速检测致病性副溶血性弧菌的四重PCR体系。通过特异性验证、灵敏度验证以及模拟样品检测进行方法确认。【结果】四重PCR体系扩增条带与预期相符,即115 bp(tox R)、244 bp(tdh)、418 bp(trh)、759 bp(tlh)4个目的条带;用74株副溶血性弧菌和37株非目标菌的测试结果表明,所建立的方法有良好的特异性。该方法对模板DNA的检测灵敏度为50μg/L,纯培养物的检测灵敏度为6.7×103 CFU/m L;副溶血性弧菌含量为1.36 CFU/g的人工模拟样品增菌6 h后,tox R、tlh、tdh、trh 4个基因可同时被检出。【结论】该方法可实现同时检测携带tox R、tdh、trh、tlh 4种基因的副溶血性弧菌,对开展致病性副溶血性弧菌的检测研究具有一定现实意义。     

副溶血性弧菌在青岛近海及几种海产食品中的微生态分布

已知副溶血性弧菌(Vibrio parahaemolyticus)广泛分布于海洋环境中,它也是一种水产食品的重要食物中毒菌及海产动物的条件性病原菌(Opportunistic pathogen)。本文报告了在青岛近岸海水中和几种常见的水产食品污染了该菌情况,并在检测方法上,修定了一种选择性较强的培养基(SAC),实验结果表明“SAC”较其他常用的几种培养基对副溶血性弧菌检出的阳性率和灵敏性均较高,与常用的“TCBC”法比较,其     

改良K-B法用于副溶血性弧菌耐药性检测

K-B纸片法是最为广泛的细菌药敏测定方法之一,针对常见的食源性致病菌副溶血性弧菌,对K-B纸片法进行优化和改良。通过建立OD-菌数对应公式以代替传统的麦氏比浊方法,并根据抑菌圈判别结果的差异,选择了标准一次性平皿(9 cm×9 cm),同时对比3种不同的涂布方法,得出定量300μL棉拭子涂布方法变异系数(CV)最小,最后通过8株野生副溶血性弧菌的耐药性检测,表明改良K-B法与传统方法的实验结果基本保持一致。从而建立了一种更高效、更快捷的细菌耐药性测量方法,可应用于副溶血性弧菌的耐药性检测。     

我国东部海域近岸水体中副溶血性弧菌的多元相关性分析

副溶血性弧菌（Vibrio parahemolyticus）是一种重要的水产品食源性致病菌,在我国沿海地区已成为引发细菌性食物中毒的首要风险因子。采集了我国东部海域(18.1°～38.5°N,109.3°～122.5°E)近岸水体样品,测定了水样的pH、盐度、温度、电导率、溶解性固体总量、溶解氧,以及副溶血性弧菌疑似菌含量,建立了水体环境因素与副溶血性弧菌相关性的模型。初步分析结果显示,水体的盐度是影响我国东部海域近岸水体中副溶血性弧菌丰度的主要环境因素。研究结果可为沿海地区副溶血性弧菌流行预警的研究提供数据参考。     

Ecology and seasonal distribution of Vibrio parahaemolyticus in aquatic environments of a temperate region

Abstract An environmental survey was done to study the ecology and distribution of Vibrio parahaemolyticus in 5 selected stations in Okayama Prefecture, which included fresh, brackish, and marine aquatic environments. Water and plankton samples were collected monthly for quantitative and qualitative analyses during the period October, 1987 to October, 1989 for V. parahaemolyticus . The pathogen was not detected from fresh water environments. A seasonality of the organism was observed in brackish and marine environments where average salinity ranged between 0.39 and 1.28%.Plankton samples yielded higher densities of V. parahaemolyticus compared with water samples. By applying several enrichment techniques, the pathogen was detected quite frequently during the winter months in the environments with temperatures ranging between 10 and 14°C. The identification following conventional tests, by the API 20E system and by serological methods reveal that the API 20E system is satisfactory to identify V. parahaemolyticus and further confirms that the serological method could be a simpler and more rapid procedure for V. parahaemolyticus identification.     

Comparison of different biochemical and molecular methods for the identification of Vibrio parahaemolyticus

AIMS: Multicentre evaluation of biochemical and molecular methods for the identification of Vibrio parahaemolyticus. METHODS AND RESULTS: For the biochemical identification methods, API 20E and API 20NE and Alsina's scheme were evaluated in intra- and interlaboratory tests in order to determine the accuracy and concordance of each method. Both in intra- and interlaboratory tests, the Alsina's scheme showed the highest sensitivity (86% of correct identifications in the interlaboratory test). False-positive results were obtained by all methods (specificity was 95% for API 20E, 73% for API 20NE and 84% for Alsina's scheme) and concordance varied from 65% of API 20NE to 84% of API 20E. For the molecular identifications, polymerase chain reaction (PCR) for the detection of toxR gene, tl gene and pR72H fragment were tested on 30 strains by two laboratories. The PCR for toxR showed the highest inclusivity (96%), exclusivity (100%) and concordance (97%). CONCLUSIONS: Among the biochemical identification methods tested, the Alsina's scheme gave more reliable results; however, in order to avoid false-positive results, all the biochemical identifications should be confirmed by means of molecular methods. SIGNIFICANCE AND IMPACT OF THE STUDY: Availability of an efficient identification method of Vibrio parahaemolyticus to use in official control of fisheries products.     

A Universal Method for the Identification of Bacteria Based on General PCR Primers

The Universal Method (UM) described here will allow the detection of any bacterial rDNA leading to the identification of that bacterium. The method should allow prompt and accurate identification of bacteria. The principle of the method is simple; when a pure PCR product of the 16S gene is obtained, sequenced, and aligned against bacterial DNA data base, then the bacterium can be identified. Confirmation of identity may follow. In this work, several general 16S primers were designed, mixed and applied successfully against 101 different bacterial isolates. One mixture, the Golden mixture7 (G7) detected all tested isolates (67/67). Other golden mixtures; G11, G10, G12, and G5 were useful as well. The overall sensitivity of the UM was 100% since all 101 isolates were detected yielding intended PCR amplicons. A selected PCR band from each of 40 isolates was sequenced and the bacterium identified to species or genus level using BLAST. The results of the UM were consistent with bacterial identities as validated with other identification methods; cultural, API 20E, API 20NE, or genera and species specific PCR primers. Bacteria identified in the study, covered 34 species distributed among 24 genera. The UM should allow the identification of species, genus, novel species or genera, variations within species, and detection of bacterial DNA in otherwise sterile samples such as blood, cerebrospinal fluid, manufactured products, medical supplies, cosmetics, and other samples. Applicability of the method to identifying members of bacterial communities is discussed. The approach itself can be applied to other taxa such as protists and nematodes.     

Comparison of a commercial biochemical kit and an oligonucleotide probe for identification of environmental isolates of Vibrio vulnificus

A. DALSGAARD, I. DALSGAARD, L. HØI AND J.L. LARSEN. 1996. Methods for the identification and isolation of environmental isolates of Vibrio vulnificus were evaluated. Alkaline peptone water supplemented with polymyxin B and colistin-polymyxin B-cellobiose agar were employed for the isolation of suspected V. vulnificus from water, sediment and shellfish samples. When comparing the identification of putative V. vulnificus obtained with the API 20E assay and an oligonucleotide probe, 29 API 20E profiles were obtained with only four profiles (representing 20 isolates) reaching the identification threshold of V. vulnificus among a total of 66 isolates hybridizing with the probe. The results indicated that, compared with colony hybridization, the API 20E assay was not adequate for the identification of environmental isolates of V. vulnificus .     

Ecology of Vibrio mimicus in aquatic environments

An environmental study was done to examine the prevalence of Vibrio mimicus in some aquatic environments of Dhaka, Bangladesh, and of Okayama, Japan. Water samples from Dhaka environments and water and plankton samples from Okayama environments were quantitatively as well as qualitatively analyzed throughout the seasons for V. mimicus. The organism was isolated from Bangladesh environments throughout the year, whereas it was not isolated in Okayama when the water temperature fell below 10 degrees C. Samples with as many as 9.0 x 10(2) CFU of V. mimicus per 100 ml of water in Dhaka and 1.5 x 10(4) CFU of V. mimicus per 100 ml of water in Okayama were detected during the study period. V. mimicus was not found in any environment with an average salinity of 10% or more. Brackish environments with an average salinity of 4% were observed to be the optimal natural condition for the pathogen. Using the API 20E system with the conventional test methods, we observed variations in biochemical properties within the V. mimicus species. This study reveals the inefficacy of the API 20E system to identify a significant percentage of V. mimicus. Therefore, in addition to the API 20E system, a salt tolerance test and a string test are recommended for identification of this species. Susceptibility testing of strains isolated from Okayama environments showed higher resistance to ampicillin and susceptibility to trimethoprim-sulfamethoxazole when compared with environmental isolates of V. mimicus from Bangladesh.     

Ecology of Vibrio mimicus in aquatic environments.

An environmental study was done to examine the prevalence of Vibrio mimicus in some aquatic environments of Dhaka, Bangladesh, and of Okayama, Japan. Water samples from Dhaka environments and water and plankton samples from Okayama environments were quantitatively as well as qualitatively analyzed throughout the seasons for V. mimicus. The organism was isolated from Bangladesh environments throughout the year, whereas it was not isolated in Okayama when the water temperature fell below 10 degrees C. Samples with as many as 9.0 x 10(2) CFU of V. mimicus per 100 ml of water in Dhaka and 1.5 x 10(4) CFU of V. mimicus per 100 ml of water in Okayama were detected during the study period. V. mimicus was not found in any environment with an average salinity of 10% or more. Brackish environments with an average salinity of 4% were observed to be the optimal natural condition for the pathogen. Using the API 20E system with the conventional test methods, we observed variations in biochemical properties within the V. mimicus species. This study reveals the inefficacy of the API 20E system to identify a significant percentage of V. mimicus. Therefore, in addition to the API 20E system, a salt tolerance test and a string test are recommended for identification of this species. Susceptibility testing of strains isolated from Okayama environments showed higher resistance to ampicillin and susceptibility to trimethoprim-sulfamethoxazole when compared with environmental isolates of V. mimicus from Bangladesh.     

免疫磁珠富集技术联合选择性培养基快速检测单增李斯特菌

单增李斯特菌是一种危害极大的食源性致病菌,建立快速及特异的检测方法对于食品安全监控尤为重要。文中联合免疫磁珠与选择性培养基对不同浓度(101~105CFU/mL)单增李斯特菌进行检测,并对3种李斯特菌、金黄色葡萄球菌及副溶血弧菌进行交叉试验;同时模拟食物污染,探索免疫磁珠-平板法检测样品的检测限以及该方法的最快检测时间。结果显示特异性免疫磁珠联合选择性平板法可检出浓度为103CFU/mL及以上的单增李斯特菌;牛奶样品仅需6 h增菌能被检出,检测限为0.7 CFU/mL。联合使用免疫磁珠富集技术与选择性培养基,能在30 h内完成对牛奶样品的检测,较国标法减少38 h以上,且具有同等的灵敏度。     

Diluent composition for use of API 20E in characterizing marine and estuarine bacteria.

Nine chemically defined inoculation diluents, with compositions ranging from 0.85% NaCl to 35% marine salts, were used to evaluate the influence of diluent composition on the biochemical profiles of 30 marine and estuarine bacterial strains, including species of Vibrio, Aeromonas, Allomonas, and Photobacterium. Results demonstrated that a 20% marine salts diluent enabled the characterization of halophilic strains normally nonreactive by the API 20E system. Furthermore, the use of 20% marine salts showed that certain environmental isolates, identifiable as Vibrio parahaemolyticus by the recommended clinical inoculation procedure, were Vibrio vulnificus. An analysis of the profiles provided by the nine diluents indicates that the API 20E system, modified by the use of a diluent composed of 20% marine salts and incubated at 22 degrees C, can provide a reliable tool for the rapid characterization of marine and estuarine bacterial isolates.