Low-resolution structure and fluorescence anisotropy analysis of protein tyrosine phosphatase eta catalytic domain

The rat protein tyrosine phosphatase eta, rPTPeta, is a class I "classical" transmembrane RPTP, with an intracellular portion composed of a unique catalytic region. The rPTPeta and the human homolog DEP-1 are downregulated in rat and human neoplastic cells, respectively. However, the malignant phenotype is reverted after exogenous reconstitution of rPTPeta, suggesting that its function restoration could be an important tool for gene therapy of human cancers. Using small-angle x-ray scattering (SAXS) and biophysical techniques, we characterized the intracellular catalytic domain of rat protein tyrosine phosphatase eta (rPTPetaCD) in solution. The protein forms dimers in solution as confirmed by SAXS data analysis. The SAXS data also indicated that rPTPetaCD dimers are elongated and have an average radius of gyration of 2.65 nm and a D(max) of 8.5 nm. To further study the rPTPetaCD conformation in solution, we built rPTPetaCD homology models using as scaffolds the crystallographic structures of RPTPalpha-D1 and RPTPmicro-D1 dimers. These models were, then, superimposed onto ab initio low-resolution SAXS structures. The structural comparisons and sequence alignment analysis of the putative dimerization interfaces provide support to the notion that the rPTPetaCD dimer architecture is more closely related to the crystal structure of autoinhibitory RPTPalpha-D1 dimer than to the dimeric arrangement exemplified by RPTPmicro-D1. Finally, the characterization of rPTPetaCD by fluorescence anisotropy measurements demonstrates that the dimer dissociation is concentration dependent with a dissociation constant of 21.6 +/- 2.0 microM.     

Structural features of the full-length adaptor protein GADS in solution determined using small-angle X-ray scattering

The Grb2-related adaptor protein GADS plays a central role during the initial phases of signal transduction in T lymphocytes. GADS possesses N- and C-terminal Src homology 3 (SH3) domains flanking a central Src homology 2 (SH2) domain and a 126-residue region rich in glutamine and proline residues, presumed to be largely unstructured. The SH2 domain of GADS binds the adaptor protein LAT; the C-terminal SH3 domain pairs GADS to the adaptor protein SLP-76, whereas the function of the central region is unknown. High-resolution three-dimensional models are available for the isolated SH2 and C-terminal SH3 domains in complex with their respective binding partners, LAT and SLP-76. However, in part because of its intrinsic instability, there is no structural information for the entire GADS molecule. Here, we report the low-resolution structure of full-length GADS in solution using small-angle x-ray scattering (SAXS). Based on the SAXS data, complemented by gel filtration experiments, we show that full-length GADS is monomeric in solution and that its overall structural parameters are smaller than those expected for a protein with a long unstructured region. Ab initio and rigid body modeling of the SAXS data reveal that full-length GADS is a relatively compact molecule and that the potentially unstructured region retains a significant degree of structural order. The biological function of GADS is discussed based on its overall structure.     

Conformational characteristics of the complete sequence of group A streptococcal M6 protein

M protein is considered a virulence determinant on the streptococcal cell wall by virtue of its ability to allow the organism to resist attack by human neutrophils. The complete DNA sequence of the M6 gene from streptococcal strain D471 has allowed, for the first time, the study of the structural characteristics of the amino acid sequence of an entire M protein molecule. Predictive secondary structural analysis revealed that the majority of this fibrillar molecule exhibits strong alpha-helical potential and that, except for the ends, nonpolar residues in the central region of the molecule exhibit the 7-residue periodicity typical for coiled-coil proteins. Differences in this heptad pattern of nonpolar residues allow this central rod region to be divided into three subdomains which correlate essentially with the repeat regions A, B, and C/D in the M6 protein sequence. Alignment of the N-terminal half of the M6 sequence with PepM5, the N-terminal half of the M5 protein, revealed that 42% of the amino acids were identical. The majority of the identities were "core" nonpolar residues of the heptad periodicity which are necessary for the maintenance of the coiled coil. Thus, conservation of structure in a sequence-variable region of these molecules may be biologically significant. Results suggest that serologically different M proteins may be built according to a basic scheme: an extended central coiled-coil rod domain (which may vary in size among strains) flanked by functional end domains.     

Small-angle X-ray scattering reveals the solution structure of the peripheral stalk subunit H of the A1AO ATP synthase from Methanocaldococcus jannaschii and its binding to the catalytic A subunit

The H subunit of the A1AO ATP synthase is a component of one of the peripheral stalks connecting the A1 and AO domain. Subunit H of the Methanocaldococcus jannaschii A1AO ATP synthase was analyzed by small-angle X-ray scattering (SAXS) in order to determine the first low-resolution structure of this molecule in solution. Independent to the concentration used, the protein is dimeric and has a boomerang-like shape, divided into two arms of 12.0 and 6.8 nm in length. Circular dichroism (CD) spectroscopy revealed that subunit H is comprised of 78% alpha-helix and a coiled-coil arrangement. To understand the orientation of the helices and the localization of the N- and C-termini inside the dimer, three truncated forms of subunit H (H8-104, H1-98, and H8-98) were expressed, purified, and analyzed by CD. SAXS experiments of H1-98 show that the maximum dimension of the truncated protein dropped to 15.1 nm. Comparison of the low-resolution shapes of H and H1-98 indicates that this goes along with structural changes in the C-terminal arm of the boomerang-like structure. Together with the result of a disulfide formation of a fourth truncated form, H1-47, with a cysteine at position 47, the data suggest a parallel alpha-helical interaction. In addition, all four truncated proteins are dimeric in solution. Tryptophan emission spectra showed specific binding of H and H8-104 to the neighboring, catalytic A subunit, which could not be detected in the presence of H1-98. Finally, the arrangement of H within the A1AO ATP synthase is presented.     

Small angle X-ray scattering as a complementary tool for high-throughput structural studies

Structural crystallography and nuclear magnetic resonance (NMR) spectroscopy are the predominant techniques for understanding the biological world on a molecular level. Crystallography is constrained by the ability to form a crystal that diffracts well and NMR is constrained to smaller proteins. Although powerful techniques, they leave many soluble, purified structurally uncharacterized protein samples. Small angle X-ray scattering (SAXS) is a solution technique that provides data on the size and multiple conformations of a sample, and can be used to reconstruct a low-resolution molecular envelope of a macromolecule. In this study, SAXS has been used in a high-throughput manner on a subset of 28 proteins, where structural information is available from crystallographic and/or NMR techniques. These crystallographic and NMR structures were used to validate the accuracy of molecular envelopes reconstructed from SAXS data on a statistical level, to compare and highlight complementary structural information that SAXS provides, and to leverage biological information derived by crystallographers and spectroscopists from their structures. All the ab initio molecular envelopes calculated from the SAXS data agree well with the available structural information. SAXS is a powerful albeit low-resolution technique that can provide additional structural information in a high-throughput and complementary manner to improve the functional interpretation of high-resolution structures.     

Structural insights into the beta-mannosidase from T. reesei obtained by synchrotron small-angle X-ray solution scattering enhanced by X-ray crystallography

A molecular envelope of the beta-mannosidase from Trichoderma reesei has been obtained by combined use of solution small-angle X-ray scattering (SAXS) and protein crystallography. Crystallographic data at 4 A resolution have been used to enhance informational content of the SAXS data and to obtain an independent, more detailed protein shape. The phased molecular replacement technique using a low resolution SAXS model, building, and refinement of a free atom model has been employed successfully. The SAXS and crystallographic free atom models exhibit a similar globular form and were used to assess available crystallographic models of glycosyl hydrolases. The structure of the beta-galactosidase, a member of a family 2, clan GHA glycosyl hydrolases, shows an excellent fit to the experimental molecular envelope and distance distribution function of the beta-mannosidase, indicating gross similarities in their three-dimensional structures. The secondary structure of beta-mannosidase quantified by circular dichroism measurements is in a good agreement with that of beta-galactosidase. We show that a comparison of distance distribution functions in combination with 1D and 2D sequence alignment techniques was able to restrict the number of possible structurally homologous proteins. The method could be applied as a general method in structural genomics and related fields once protein solution scattering data are available.     

Rapid and accurate structure determination of coiled-coil domains using NMR dipolar couplings: application to cGMP-dependent protein kinase Ialpha

Coiled-coil motifs play essential roles in protein assembly and molecular recognition, and are therefore the targets of many ongoing structural and functional studies. However, owing to the dynamic nature of many of the smaller coiled-coil domains, crystallization for X-ray studies is very challenging. Determination of elongated structures using standard NMR approaches is inefficient and usually yields low-resolution structures due to accumulation of small errors over long distances. Here we describe a solution NMR approach based on residual dipolar couplings (RDCs) for rapid and accurate structure determination of coiled-coil dimers. Using this approach, we were able to determine the high-resolution structure of the coiled-coil domain of cGMP-dependent protein kinase Ialpha, a protein of previously unknown structure that is critical for physiological relaxation of vascular smooth muscle. This approach can be extended to solve coiled-coil structures with higher order assemblies.     

Laminins and other strange proteins.

Laminins are large multidomain proteins of the extracellular matrix (ECM) with important functions in the development and maintenance of cellular organization and supramolecular structure, in particular in basement membranes. Each molecule is composed of three polypeptide chains, A (300-400 kDa) and B1 and B2 (180-200 kDa), which together form the characteristic cross-shaped laminin structure with three short arms and one long arm. Many different domains have been identified in laminin by sequence analysis, structural investigations, and functional studies. Each short arm is formed by homologous N-terminal portions of one of the three chains. Structurally, each short arm contains two or three globular domains which are connected by rows of manyfold-repeated Cys-rich "EGF-like" domains. In all three chains this region is followed by a long heptad repeat region similar to those found in many alpha-helical coiled-coil proteins. These parts of the three laminin chains constitute a triple-stranded coiled-coil domain, which forms the extended rodlike structure of the long arm. This is the only domain in the protein which is made up of more than one chain and consequently serves the function of chain assembly. The two B chains are terminated by the coiled-coil domain, but the A chain contains an additional C-terminal segment which accounts for five globular domains located at the tip of the long arm. Several important functions of laminin have been assigned to individual domains in either the short arms or terminal regions of the long arm.(ABSTRACT TRUNCATED AT 250 WORDS)     

A model for the three-dimensional structure of human plasma vitronectin from small-angle scattering measurements

Small-angle X-ray scattering (SAXS) measurements were used to characterize vitronectin, a circulatory protein found in human plasma that functions in regulating cell adhesion and migration, as well as proteolytic cascades that affect blood coagulation, fibrinolysis, and pericellular proteolysis. SAXS measurements were taken over a 3-fold range of protein concentrations, yielding data that characterize a monodisperse system of particles with an average radius of gyration of 30.3 +/- 0.6 A and a maximum linear dimension of 110 A. Shape restoration was applied to the data to produce two models of the solution structure of the ligand-free protein. A low-resolution model of the protein was generated that indicates the protein to be roughly peanut-shaped. A better understanding of the domain structure of vitronectin resulted from low-resolution models developed from available high-resolution structures of the domains. These domains include the N-terminal domain that was determined experimentally by NMR [Mayasundari, A., Whittemore, N. A., Serpersu, E. H., and Peterson, C. B. (2004) J. Biol. Chem. 279, 29359-29366] and the docked structure of the central and C-terminal domains that were determined by computational threading [Xu, D., Baburaj, K., Peterson, C. B., and Xu, Y. (2001) Proteins: Struct., Funct., Genet. 44, 312-320]. This model provides an indication of the disposition of the central domain and C-terminal heparin-binding domains of vitronectin with respect to the N-terminal somatomedin B (SMB) domain. This model constructed from the available domain structures, which agrees with the low-resolution model produced from the SAXS data, shows the SMB domain well separated from the central and heparin-binding domains by a disordered linker (residues 54-130). Also, binding sites within the SMB domain are predicted to be well exposed to the surrounding solvent for ease of access to its various ligands.     

Structure, dynamics and domain organization of the repeat protein Cin1 from the apple scab fungus

Venturia inaequalis is a hemi-biotrophic fungus that causes scab disease of apple. A recently-identified gene from this fungus, cin1 (cellophane-induced 1), is up-regulated over 1000-fold in planta and considerably on cellophane membranes, and encodes a cysteine-rich secreted protein of 523 residues with eight imperfect tandem repeats of ~60 amino acids. The Cin1 sequence has no homology to known proteins and appears to be genus-specific; however, Cin1 repeats and other repeat domains may be structurally similar. An NMR-derived structure of the first two repeat domains of Cin1 (Cin1-D1D2) and a low-resolution model of the full-length protein (Cin1-FL) using SAXS data were determined. The structure of Cin1-D1D2 reveals that each domain comprises a core helix-loop-helix (HLH) motif as part of a three-helix bundle, and is stabilized by two intra-domain disulfide bonds. Cin1-D1D2 adopts a unique protein fold as DALI and PDBeFOLD analysis identified no structural homology. A (15)N backbone NMR dynamic analysis of Cin1-D1D2 showed that a short stretch of the inter-domain linker has large amplitude motions that give rise to reciprocal domain-domain mobility. This observation was supported by SAXS data modeling, where the scattering length density envelope remains thick at the domain-domain boundary, indicative of inter-domain dynamics. Cin1-FL SAXS data models a loosely-packed arrangement of domains, rather than the canonical parallel packing of adjacent HLH repeats observed in α-solenoid repeat proteins. Together, these data suggest that the repeat domains of Cin1 display a "beads-on-a-string" organization with inherent inter-domain flexibility that is likely to facilitate interactions with target ligands.     

Genome-wide identification of Arabidopsis coiled-coil proteins and establishment of the ARABI-COIL database

Increasing evidence demonstrates the importance of long coiled-coil proteins for the spatial organization of cellular processes. Although several protein classes with long coiled-coil domains have been studied in animals and yeast, our knowledge about plant long coiled-coil proteins is very limited. The repeat nature of the coiled-coil sequence motif often prevents the simple identification of homologs of animal coiled-coil proteins by generic sequence similarity searches. As a consequence, counterparts of many animal proteins with long coiled-coil domains, like lamins, golgins, or microtubule organization center components, have not been identified yet in plants. Here, all Arabidopsis proteins predicted to contain long stretches of coiled-coil domains were identified by applying the algorithm MultiCoil to a genome-wide screen. A searchable protein database, ARABI-COIL (http://www.coiled-coil.org/arabidopsis), was established that integrates information on number, size, and position of predicted coiled-coil domains with subcellular localization signals, transmembrane domains, and available functional annotations. ARABI-COIL serves as a tool to sort and browse Arabidopsis long coiled-coil proteins to facilitate the identification and selection of candidate proteins of potential interest for specific research areas. Using the database, candidate proteins were identified for Arabidopsis membrane-bound, nuclear, and organellar long coiled-coil proteins.     

Uso1 Protein Is a Dimer with Two Globular Heads and a Long Coiled-Coil Tail

USO1is one of the essential genes inSaccharomyces cerevisiaewhose gene products participate in protein transport from the endoplasmic reticulum to the Golgi apparatus. This product was purified to homogeneity. Electron microscopic study revealed that it has a single or double globular domain with a long tail and that the molecule is a dimer. A peak position of the distribution of rod length was 154.5 nm, in agreement with the secondary structure prediction that it has a long α-helix at the carboxyl terminus. Probability of coiled-coil formation was also predicted from the primary structure of the product, which asserts that it has a long α-helical coiled-coil at the carboxyl-terminal region with some interruptions. Certainly, the electron microscopic image of this molecule had some hinges within the rod region. The distance was measured between the globular domain and the hinges. Two peaks of the distribution of the hinge position exist at 23.1 and 85.5 nm from the globular domain. This is consistent with the predicted positions of interruption. These results give new experimental evidence that Uso1 protein is a dimer and has an α-helical coiled-coil tail with two globular heads.     

Low resolution structure determination shows procollagen C-proteinase enhancer to be an elongated multidomain glycoprotein

Procollagen C-proteinase enhancer (PCPE) is an extracellular matrix glycoprotein that can stimulate the action of tolloid metalloproteinases, such as bone morphogenetic protein-1, on a procollagen substrate, by up to 20-fold. The PCPE molecule consists of two CUB domains followed by a C-terminal NTR (netrin-like) domain. In order to obtain structural insights into the function of PCPE, the recombinant protein was characterized by a range of biophysical techniques, including analytical ultracentrifugation, transmission electron microscopy, and small angle x-ray scattering. All three approaches showed PCPE to be a rod-like molecule, with a length of approximately 150 A. Homology modeling of both CUB domains and the NTR domain was consistent with the low-resolution structure of PCPE deduced from the small angle x-ray scattering data. Comparison with the low-resolution structure of the procollagen C-terminal region supports a recently proposed model (Ricard-Blum, S., Bernocco, S., Font, B., Moali, C., Eichenberger, D., Farjanel, J., Burchardt, E. R., van der Rest, M., Kessler, E., and Hulmes, D. J. S. (2002) J. Biol. Chem. 277, 33864-33869) for the mechanism of action of PCPE.     

Secondary structure of component 8c-1 of alpha-keratin. An analysis of the amino acid sequence.

The amino acid sequence of component 8c-1 from alpha-keratin was analysed by using secondary-structure prediction techniques, homology search methods, fast Fourier-transform techniques to detect regularities in the linear disposition of amino acids, interaction counts to assess possible modes of chain aggregation and assessment of hydrophilicity distribution. The analyses show the following. The molecule has two lengths of coiled-coil structure, each about 20 nm long, one from residues 56-202 with a discontinuity from about residue 91 to residue 101, and the other from residues 219-366 with discontinuities from about residue 238 to residue 245 and at about residue 306. The acidic and basic residues in the coiled-coil segment between residues 102 and 202 show a 9,4-residue structural period in their linear disposition, whereas between residues 246 and 366 a period of 9.9 residues is observed in the positioning of ionic residues. Acidic and basic residues are out of phase by 180 degrees. Similar repeats occur in corresponding regions of other intermediate-filament proteins. The overall mean values for the repeats are 9.55 residues in the N-terminal region and 9.85 residues in the C-terminal region. The regions at each end of the protein chain (residues 1-55 and 367-412) are not alpha-helical and contain many potential beta-bends. The regions specified in have a significant degree of homology mainly due to a semi-regular disposition of proline and half-cystine residues on a three-residue grid; this is especially apparent in the C-terminal segment, in which short (Pro-Cys-Xaa)n regions occur. The coiled-coil segments of component 8c-1 bear a striking similarity to corresponding segments of other intermediate-filament proteins as regards sequence homology, structural periodicity of ionic residues and secondary/tertiary-structure predictions. The assessments of the probabilities that these homologies occurred by chance indicate that there are two populations of keratin filament proteins. The non-coiled-coil regions at each end of the chain are less hydrophilic than the coiled-coil regions. Ionic interactions between the heptad regions of components 8c-1 and 7c from the microfibrils of alpha-keratin are optimized when a coiled-coil structure is formed with the heptad regions of the constituent chains both parallel and in register.     

The wac gene product of bacteriophage T4 contains coiled-coil structural patterns

The bacteriophage T4 late gene wac (whisker antigen control) encodes the protein which forms the fibrous structure on the neck of the virion called whiskers. Amino acid sequence analysis of wac gene product, as deduced from the nucleotide sequence, indicate ten alpha-helical domains (19-40 residues long) with coiled-coil structural patterns. These regions comprise about 70% of the entire 486 amino acid sequence. The alpha-helices are separated by short stretches of polypeptide chain which are similar to the loop regions of the globular protein sequences. We propose a structural model for the dimer of wac gene product molecule, that we call fibritin in which two polypeptide chains associate in a parallel fashion and form a segmented alpha-helical coiled-coil rod similar to epidermal keratins.     

Sequence homology of group A streptococcal Pep M5 protein with other coiled-coil proteins

Group A streptococcal Pep M5 protein, an antiphagocytic determinant of the bacteria, is an alpha-helical coiled-coil molecule, and exhibits significant sequence homology with tropomyosin and myosin, but to a lesser degree with other coiled-coil proteins. Moreover, Pep M5 is more homologous to myosin than to tropomyosin, and the homologies are more numerous between the C-terminal domain of the Pep M5 protein and the S2 fragment of myosin. The C-terminal domain of the Pep M5 protein exhibits extensive sequence identity with the C-terminal region of Pep M6 molecule, another M protein serotype. Thus, regions within two M protein serotypes are homologous to the S2 region of the myosin molecule. These observations are consistent with the immunological findings of other investigators and thus may explain some of the previously reported immunological cross-reactions between antigens of the group A streptococcus and mammalian heart tissue.     

The N terminus controls sterol binding while the C terminus regulates the scaffolding function of OSBP

Previously we reported that when cell cholesterol is acutely lowered with beta-methyl-cyclodextrin the amount of activated ERK1/2 in caveolae dramatically increases. We traced the origin of this novel method of pERK1/2 accumulation to a macromolecular complex with dual specific phosphatase activity that contains the serine/threonine phosphatase PP2A, the tyrosine phosphatase HePTP, the oxysterol-binding protein OSBP and cholesterol. When cell cholesterol is lowered, or oxysterols is introduced, the complex disassembles and pERK1/2 increases. In an effort to better understand how OSBP functions as a cholesterol-regulated scaffolding protein, we have mapped the functional parts of the molecule. The command center of the molecule is a centrally located, 51 amino acids (408-459) long sterol-binding domain that can bind both cholesterol and 25-hydroxycholesterol. This domain is functional whether attached to the N- or the C-terminal half of OSBP. Introduction of a Y458S mutation impairs binding. Even though 25-hydroxycholesterol will compete for cholesterol binding to OSBP(408-809), it will not compete for cholesterol binding in full-length OSBP. Upon further analysis we found that a glycine-alaninerich region at the N-terminal end of OSBP works with the PH domain to control cholesterol binding without affecting 25-hydroxycholesterol binding. Finally, we found that HePTP and PP2A bind the C-terminal half of OSBP, HePTP binds a coiled-coil domain (amino acids 732-761), and PP2A binds neither the coiled-coil nor HePTP. On the basis of this information we propose a new model for how OSBP is able to sense both membrane cholesterol and oxidized sterols and link this information to the ERK1/2 signaling pathway.     

Proteins searching for their target on DNA by one-dimensional diffusion: overcoming the “speed-stability” paradox

The sequence dependence of DNA-protein interactions that allows proteins to find the correct reaction site also slows down the 1D diffusion of the protein along the DNA molecule, leading to the so-called “speed-stability paradox,” wherein fast diffusion along the DNA molecule is seemingly incompatible with stable targeting of the reaction site. Here, we develop diffusion-reaction models that use discrete and continuous Gaussian random 1D diffusion landscapes with or without a high-energy cut-off, and two-state models with a transition to and from a “searching” mode in which the protein diffuses rapidly without recognizing the target. We show the conditions under which such considerations lead to a predicted speed-up of the targeting process, and under which the presence of a “searching” mode in a two-state model is nearly equivalent to the existence of a high-energy cut-off in a one-state model. We also determine the conditions under which the search is either diffusion-limited or reaction-limited, and develop quantitative expressions for the rate of successful targeting as a function of the site-specific reaction rate, the roughness of the DNA-protein interaction potential, and the presence of a “searching” mode. In general, we find that a rough landscape is compatible with a fast search if the highest energy barriers can be avoided by “hopping” or by the protein transitioning to a lower-energy “searching” mode. We validate these predictions with the results of Brownian dynamics, kinetic Metropolis, and kinetic Monte Carlo simulations of the diffusion and targeting process, and apply these concepts to the case of T7 RNA polymerase searching for its target site on T7 DNA.     

Low-resolution structure of the proteolytic fragments of the Rapana venosa hemocyanin in solution

Rapana venosa hemocyanin (Hc) is a giant oxygen-binding protein consisting of different subunits assembled in a hollow cylinder. The polypeptide chain of each subunit is believed to be folded in several oxygen-binding functional units of molecular mass 50 kDa, each containing a binuclear copper active site. Limited proteolysis with alpha-chymotrypsin of native R. venosa hemocyanin allows the separation of three functional proteolytic fragments with molecular masses of approximately 150, 100, and 50 kDa. The functional fragments, purified by combining gel filtration chromatography and ion-exchange FPLC, were analyzed by means of small-angle X-ray scattering (SAXS). The gyration radius of the 50-kDa Rapana Hc fraction (2.4 nm) agrees well with that calculated on the basis of the dimensions determined by X-ray crystallography for one functional unit of Octopus Hc (2.1 nm). Independent shape determination of the 50- and 100-kDa proteolytic fragments yields consistent low-resolution models. Simultaneous fitting of the SAXS data from these fragments provides a higher-resolution model of the 100-kDa species made of two functional units tilted with respect to each other. The model of the 150-kDa proteolytic fragment consistent with the SAXS data displays a linear chain-like aggregation of the 50-kDa functional units. These observations provide valuable information for the reconstruction of the three-dimensional structure of the minimal functional subunit of gastropod hemocyanin in solution. Furthermore, the spatial relationships among the different functional units within the subunit will help in elucidation of the overall quaternary structure of the oligomeric native protein.     

Type XIII collagen and some other transmembrane collagens contain two separate coiled-coil motifs,which may function as independent oligomerization domains

Type XIII collagen is a homotrimeric transmembrane collagen composed of a short intracellular domain, a single membrane-spanning region, and an extracellular ectodomain with three collagenous domains (COL1-3) separated by short non-collagenous domains (NC1-4). Several collagenous transmembrane proteins have been found to harbor a conserved sequence next to their membrane-spanning regions, and in the case of type XIII collagen this sequence has been demonstrated to be important for chain association. We show here that this 21-residue sequence is necessary but not sufficient for NC1 association. Furthermore, the NC1 association region was predicted to form an alpha-helical coiled-coil structure, which may already begin at the membrane-spanning region, as is also predicted for the related collagen types XXIII and XXV. Interestingly, a second coiled-coil structure is predicted to be located in the NC3 domain of type XIII collagen and in the corresponding domains of types XXIII and XXV. It is found experimentally that the absence of the NC1 coiled-coil domain leads to a lack of disulfide-bonded trimers and misfolding of the membrane-proximal collagenous domain COL1, whereas the COL2 and COL3 domains are correctly folded. We suggest that the NC1 coiled-coil domain is important for association of the N-terminal part of the type XIII collagen alpha chains, whereas the NC3 coiled-coil domain is implicated in the association of the C-terminal part of the molecule. All in all, we propose that two widely separated coiled-coil domains of type XIII and related collagens function as independent oligomerization domains participating in the folding of distinct areas of the molecule.