Mutational and structural studies aimed at characterizing the monomer of HIV-1 protease and its precursor

An experimental protocol for folding the mature human immunodeficiency virus-1 (HIV-1) protease is presented that facilitates NMR studies at a low protein concentration of approximately 20 micoM. Under these conditions, NMR spectra show that the mature protease lacking its terminal beta-sheet residues 1-4 and 96-99 (PR(5-95)) exhibits a stable monomer fold spanning the region 10-90 that is similar to that of the single subunit of the wild-type dimer and the dimer bearing a D25N mutation (PR(D25N)). Urea-induced unfolding monitored both by changes in (1)H-(15)N heteronuclear single quantum correlation spectra and by protein fluorescence indicates that although PR(5-95) monomer displays a transition profile similar to that of the PR(D25N) dimer (50% unfolded (U(50)) = approximately 1.9 M), extending the protease with 4 residues (SFNF) of its N-terminally flanking sequence in the Gag-Pol precursor ((SFNF)PR(D25N)) decreases the stability of the fold (U(50) = approximately 1.5 M). Assigned backbone chemical shifts were used to elucidate differences in the stability of the PR(T26A) (U(50) = 2.5 M) and (SFNF)PR(D25N) monomers and compared with PR(D25N/T26A) monomer. Discernible differences in the backbone chemical shifts were observed for N-terminal protease residues 3-6 of (SFNF)PR(D25N) that may relate to the increase in the equilibrium dissociation constant (K(d)) and the very low catalytic activity of the protease prior to its autoprocessing at its N terminus from the Gag-Pol precursor.     

Folded monomer of HIV-1 protease

The mature human immunodeficiency virus type 1 protease rapidly folds into an enzymatically active stable dimer, exhibiting an intricate interplay between structure formation and dimerization. We now show by NMR and sedimentation equilibrium studies that a mutant protease containing the R87K substitution (PR(R87K)) within the highly conserved Gly(86)-Arg(87)-Asn(88) sequence forms a monomer with a fold similar to a single subunit of the dimer. However, binding of the inhibitor DMP323 to PR(R87K) produces a stable dimer complex. Based on the crystal structure and our NMR results, we postulate that loss of specific interactions involving the side chain of Arg(87) destabilizes PR(R87K) by perturbing the inner C-terminal beta-sheet (residues 96-99 from each monomer), a region that is sandwiched between the two beta-strands formed by the N-terminal residues (residues 1-4) in the mature protease. We systematically examined the folding, dimerization, and catalytic activities of mutant proteases comprising deletions of either one of the terminal regions (residues 1-4 or 96-99) or both. Although both N- and C-terminal beta-strands were found to contribute to dimer stability, our results indicate that the inner C-terminal strands are absolutely essential for dimer formation. Knowledge of the monomer fold and regions critical for dimerization may aid in the rational design of novel inhibitors of the protease to overcome the problem of drug resistance.     

Autocatalytic maturation, physical/chemical properties, and crystal structure of group N HIV-1 protease: Relevance to drug resistance

The mature protease from Group N human immunodeficiency virus Type 1 (HIV‐1) (PR1_N) differs in 20 amino acids from the extensively studied Group M protease (PR1_M) at positions corresponding to minor drug‐resistance mutations (DRMs). The first crystal structure (1.09 Å resolution) of PR1_N with the clinical inhibitor darunavir (DRV) reveals the same overall structure as PR1_M, but with a slightly larger inhibitor‐binding cavity. Changes in the 10s loop and the flap hinge propagate to shift one flap away from the inhibitor, whereas L89F and substitutions in the 60s loop perturb inhibitor‐binding residues 29–32. However, kinetic parameters of PR1_N closely resemble those of PR1_M, and calorimetric results are consistent with similar binding affinities for DRV and two other clinical PIs, suggesting that minor DRMs coevolve to compensate for the detrimental effects of drug‐specific major DRMs. A miniprecursor (TFR 1 - 54 ‐PR1_N) comprising the transframe region (TFR) fused to the N‐terminus of PR1_N undergoes autocatalytic cleavage at the TFR/PR1_N site concomitant with the appearance of catalytic activity characteristic of the dimeric, mature enzyme. This cleavage is inhibited at an equimolar ratio of precursor to DRV (～6 μM), which partially stabilizes the precursor dimer from a monomer. However, cleavage at L34/W35 within the TFR, which precedes the TFR 1 - 54 /PR1_N cleavage at pH ≤ 5, is only partially inhibited. Favorable properties of PR1_N relative to PR1_M include its suitability for column fractionation by size under native conditions and >10‐fold higher dimer dissociation constant (150 nM). Exploiting these properties may facilitate testing of potential dimerization inhibitors that perturb early precursor processing steps.     

Proteolytic processing of HIV-1 protease precursor, kinetics and mechanism.

Previously it was demonstrated using a model precursor that processing at the N terminus of the HIV-1 protease (PR) precedes processing at its C terminus. We now show the expression, purification, and kinetics of the autoprocessing reaction of a PR precursor linked to 53 amino acids of the native flanking transframe region (DeltaTFP-p6(pol)) of Gag-Pol and containing its two native cleavage sites. The PR contains the two cysteine residues exchanged to alanines, mutations that do not alter the kinetics or the structural stability of the mature PR. DeltaTFP-p6(pol)-PR, which encompasses the known PR inhibitor sequence Glu-Asp-Leu within DeltaTFP, undergoes cleavage at the DeltaTFP/p6(pol) and p6(pol)/PR sites in two consecutive steps to produce the mature PR. Both DeltaTFP-p6(pol)-PR and p6(pol)-PR exhibit low intrinsic enzymatic activity. The appearance of the mature PR is accompanied by a large increase in catalytic activity. It follows first-order kinetics in protein concentration with a rate constant of 0.13 +/- 0.01 min(-1) in 0.1 M acetate at pH 4.8. The pH-rate profile for the observed first-order rate constant is bell-shaped with two ionizable groups of pK(a) 4.9 and 5.1. The rate constant also exhibits approximately 7-fold higher sensitivity to urea denaturation as compared with that of the mature PR, suggesting that the cleavage at the N terminus of the PR domain from the precursor leads to the stabilization of the dimeric structure.     

Three-dimensional structure of a monomeric form of a retroviral protease

The assembly of Mason-Pfizer monkey virus Gag polyproteins into immature capsids and their cleavage by the encoded protease are temporally and spatially separated processes, making the virus a particularly useful model for investigation of protease activation. Here we present a high resolution NMR structure of a fully folded monomer of a 12 kDa M-PMV protease (wt 12 PR) and of a Cys7Ala/Asp26Asn/Cys106Ala mutant (12 PR(D26N/C7A/C106A)). The overall structures of both wt 12 PR and 12 PR(D26N/C7A/C106A) follow the conservative structural motif of other retroviral proteases. The most prominent difference from the canonical fold of retroviral proteases is the absence of the interfacial beta-sheet, which leads to the loss of the principal force stabilizing the dimer of M-PMV PR. The monomer-dimer equilibrium can be shifted in favor of the dimer by adding a substrate or an inhibitor, partially compensating for the missing role of the beta-sheet. We also show that cysteines C7 and C106 play a crucial role in stabilizing the dimer and consequently increasing the proteolytic activity of M-PMV PR. This is consistent with the role of reversible oxidative modification of the cysteine residues in the regulation of the maturation of assembled M-PMV capsids in the cytoplasm.     

Autoprocessing of HIV-1 protease is tightly coupled to protein folding.

In the Gag-Pol polyprotein of HIV-1, the 99-amino acid protease is flanked at its N-terminus by a transframe region (TFR) composed of the transframe octapeptide (TFP) and 48 amino acids of the p6pol, separated by a protease cleavage site. The intact precursor (TFP-p6pol-PR) has very low dimer stability relative to that of the mature enzyme and exhibits negligible levels of stable tertiary structure. Thus, the TFR functions by destabilizing the native structure, unlike proregions found in zymogen forms of monomeric aspartic proteases. Cleavage at the p6pol-PR site to release a free N-terminus of protease is concomitant with the appearance of enzymatic activity and formation of a stable tertiary structure that is characteristic of the mature protease as demonstrated by nuclear magnetic resonance. The release of the mature protease from the precursor can either occur in two steps at pH values of 4 to 6 or in a single step above pH 6. The mature protease forms a dimer through a four-stranded beta-sheet at the interface. Residues 1-4 of the mature protease from each subunit constitute the outer strands of the beta-sheet, and are essential for maintaining the stability of the free protease but are not a prerequisite for the formation of tertiary structure and catalytic activity. Our experimental results provide the basis for the model proposed here for the regulation of the HIV-1 protease in the viral replication cycle.     

Effect of the active site D25N mutation on the structure, stability, and ligand binding of the mature HIV-1 protease

All aspartic proteases, including retroviral proteases, share the triplet DTG critical for the active site geometry and catalytic function. These residues interact closely in the active, dimeric structure of HIV-1 protease (PR). We have systematically assessed the effect of the D25N mutation on the structure and stability of the mature PR monomer and dimer. The D25N mutation (PR(D25N)) increases the equilibrium dimer dissociation constant by a factor >100-fold (1.3 +/- 0.09 microm) relative to PR. In the absence of inhibitor, NMR studies reveal clear structural differences between PR and PR(D25N) in the relatively mobile P1 loop (residues 79-83) and flap regions, and differential scanning calorimetric analyses show that the mutation lowers the stabilities of both the monomer and dimer folds by 5 and 7.3 degrees C, respectively. Only minimal differences are observed in high resolution crystal structures of PR(D25N) complexed to darunavir (DRV), a potent clinical inhibitor, or a non-hydrolyzable substrate analogue, Ac-Thr-Ile-Nle-r-Nle-Gln-Arg-NH(2) (RPB), as compared with PR.DRV and PR.RPB complexes. Although complexation with RPB stabilizes both dimers, the effect on their T(m) is smaller for PR(D25N) (6.2 degrees C) than for PR (8.7 degrees C). The T(m) of PR(D25N).DRV increases by only 3 degrees C relative to free PR(D25N), as compared with a 22 degrees C increase for PR.DRV, and the mutation increases the ligand dissociation constant of PR(D25N).DRV by a factor of approximately 10(6) relative to PR.DRV. These results suggest that interactions mediated by the catalytic Asp residues make a major contribution to the tight binding of DRV to PR.     

Revisiting monomeric HIV-1 protease. Characterization and redesign for improved properties

Interactions between the C-terminal interface residues (96-99) of the mature HIV-1 protease were shown to be essential for dimerization, whereas the N-terminal residues () and Arg(87) contribute to dimer stability (Ishima, R., Ghirlando, R., Tozser, J., Gronenborn, A. M., Torchia, D. A., and Louis, J. M. (2001) J. Biol. Chem. 276, 49110-49116). Here we show that the intramonomer interaction between the side chains of Asp(29) and Arg(87) influences dimerization significantly more than the intermonomer interaction between Asp(29) and Arg(8'). Several mutants, including T26A, destablize the dimer, exhibit a monomer fold, and are prone to aggregation. To alleviate this undesirable property, we designed proteins in which the N- and C-terminal regions can be linked intramolecularly by disulfide bonds. In particular, cysteine residues were introduced at positions 2 and 97 or 98. A procedure for the efficient preparation of intrachain-linked polypeptides is presented, and it is demonstrated that the Q2C/L97C variant exhibits a native-like single subunit fold. It is anticipated that monomeric proteases of this kind will aid in the discovery of novel inhibitors aimed at binding to the monomer at the dimerization interface. This extends the target area of current inhibitors, all of which bind across the active site formed by both subunits in the active dimer.     

Folding regulates autoprocessing of HIV-1 protease precursor

Autoprocessing of HIV-1 protease (PR) precursors is a crucial step in the generation of the mature protease. Very little is known regarding the molecular mechanism and regulation of this important process in the viral life cycle. In this context we report here the first and complete residue level investigations on the structural and folding characteristics of the 17-kDa precursor TFR-PR-C(nn) (161 residues) of HIV-1 protease. The precursor shows autoprocessing activity indicating that the solution has a certain population of the folded active dimer. Removal of the 5-residue extension, C(nn) at the C-terminal of PR enhanced the activity to some extent. However, NMR structural characterization of the precursor containing a mutation, D25N in the PR at pH 5.2 and 32 degrees C under different conditions of partial and complete denaturation by urea, indicate that the precursor has a high tendency to be unfolded. The major population in the ensemble displays some weak folding propensities in both the TFR and the PR regions, and many of these in the PR region are the non-native type. As both D25N mutant and wild-type PR are known to fold efficiently to the same native dimeric form, we infer that TFR cleavage enables removal of the non-native type of preferences in the PR domain to cause constructive folding of the protein. These results indicate that intrinsic structural and folding preferences in the precursor would have important regulatory roles in the autoprocessing reaction and generation of the mature enzyme.     

Critical assessment of important regions in the subunit association and catalytic action of the severe acute respiratory syndrome coronavirus main protease

The severe acute respiratory syndrome (SARS) coronavirus (CoV) main protease represents an attractive target for the development of novel anti-SARS agents. The tertiary structure of the protease consists of two distinct folds. One is the N-terminal chymotrypsin-like fold that consists of two structural domains and constitutes the catalytic machinery; the other is the C-terminal helical domain, which has an unclear function and is not found in other RNA virus main proteases. To understand the functional roles of the two structural parts of the SARS-CoV main protease, we generated the full-length of this enzyme as well as several terminally truncated forms, different from each other only by the number of amino acid residues at the C- or N-terminal regions. The quaternary structure and K(d) value of the protease were analyzed by analytical ultracentrifugation. The results showed that the N-terminal 1-3 amino acid-truncated protease maintains 76% of enzyme activity and that the major form is a dimer, as in the wild type. However, the amino acids 1-4-truncated protease showed the major form to be a monomer and had little enzyme activity. As a result, the fourth amino acid seemed to have a powerful effect on the quaternary structure and activity of this protease. The last C-terminal helically truncated protease also exhibited a greater tendency to form monomer and showed little activity. We concluded that both the C- and the N-terminal regions influence the dimerization and enzyme activity of the SARS-CoV main protease.     

Importance of the N terminus of rous sarcoma virus protease for structure and enzymatic function

All retrovirus proteases (PRs) are homodimers, and dimerization is essential for enzymatic function. The dimer is held together largely by a short four-stranded antiparallel beta sheet composed of the four or five N-terminal amino acid residues and a similar stretch of residues from the C terminus. We have found that the enzymatic and structural properties of Rous sarcoma virus (RSV) PR are exquisitely sensitive to mutations at the N terminus. Deletion of one or three residues, addition of one residue, or substitution of alanine for the N-terminal leucine reduced enzymatic activity on peptide and protein substrates 100- to 1,000-fold. The purified mutant proteins remained monomeric up to a concentration of about 2 mg/ml, as determined by dynamic light scattering. At higher concentrations, dimerization was observed, but the dimer lacked or was deficient in enzymatic activity and thus was inferred to be structurally distinct from a wild-type dimer. The mutant protein lacking three N-terminal residues (DeltaLAM), a form of PR occurring naturally in virions, was examined by nuclear magnetic resonance spectroscopy and found to be folded at concentrations where it was monomeric. This result stands in contrast to the report that a similarly engineered monomeric PR of human immunodeficiency virus type 1 is unstructured. Heteronuclear single quantum coherence spectra of the mutant at concentrations where either monomers or dimers prevail were nearly identical. However, these spectra differed from that of the dimeric wild-type RSV PR. These results imply that the chemical environment of many of the amide protons differed and thus that the three-dimensional structure of the DeltaLAM PR mutant is different from that of the wild-type PR. The structure of this mutant protein may serve as a model for the structure of the PR domain of the Gag polyprotein and may thus give clues to the initiation of proteolytic maturation in retroviruses.     

Mechanism of Dissociative Inhibition of HIV Protease and Its Autoprocessing from a Precursor

Dimerization is indispensible for release of the human immunodeficiency virus protease (PR) from its precursor (Gag-Pol) and ensuing mature-like catalytic activity that is crucial for virus maturation. We show that a single-chain Fv fragment (scFv) of a previously reported monoclonal antibody (mAb1696), which recognizes the N-terminus of PR, dissociates a dimeric mature D25N PR mutant with an enhanced dimer dissociation constant (K(d)) in the sub-micromolar range to form predominantly a monomer-scFv complex at a 1:1 ratio, along with small (5-10%) amounts of a dimer-scFv complex. Enzyme kinetics indicate a mixed mechanism of inhibition of the wild-type PR, which exhibits a K(d)<10nM, with effects both on K(m) and k(cat) at an scFv-to-PR ratio of 10:1. ScFv binds to the N-terminal peptide P(1)QITLW(6) of PR and to PR monomers with dissociation constants of ≤30nM and ~100nM, respectively. Consistent with an ~400-fold increase in the dissociation of the antibody (K(Ab)) on even addition of an acetyl group to P(1) of the peptide, the antibody fails to inhibit N-terminal autoprocessing of the PR from a model precursor (at ~5μM). However, subsequent to this cleavage, it sequesters the PR, thus blocking autoprocessing at its C-terminus. A second monoclonal antibody [PRM1 (human monoclonal antibody to PR)], which recognizes part of the flap region (residues 41-47) of the mature PR and its precursor, does not inhibit autoprocessing and ensuing catalytic activity. However, its failure to recognize drug-resistant clinical mutants of PR may be beneficial to monitor the selection of mutations in this region under drug pressure.     

Crystal Structure of DNA Cytidine Deaminase ABOBEC3G Catalytic Deamination Domain Suggests a Binding Mode of Full-length Enzyme to Single-stranded DNA

APOBEC3G (A3G) is a DNA cytidine deaminase (CD) that demonstrates antiviral activity against human immunodeficiency virus 1 (HIV-1) and other pathogenic virus. It has an inactive N-terminal CD1 virus infectivity factor (Vif) protein binding domain (A3G-CD1) and an actively catalytic C-terminal CD2 deamination domain (A3G-CD2). Although many studies on the structure of A3G-CD2 and enzymatic properties of full-length A3G have been reported, the mechanism of how A3G interacts with HIV-1 single-stranded DNA (ssDNA) is still not well characterized. Here, we reported a crystal structure of a novel A3G-CD2 head-to-tail dimer (in which the N terminus of the monomer H (head) interacts with the C terminus of monomer T (tail)), where a continuous DNA binding groove was observed. By constructing the A3G-CD1 structural model, we found that its overall fold was almost identical to that of A3G-CD2. We mutated the residues located in or along the groove in monomer H and the residues in A3G-CD1 that correspond to those seated in or along the groove in monomer T. Then, by performing enzymatic assays, we confirmed the reported key elements and the residues in A3G necessary to the catalytic deamination. Moreover, we identified more than 10 residues in A3G essential to DNA binding and deamination reaction. Therefore, this dimer structure may represent a structural model of full-length A3G, which indicates a possible binding mode of A3G to HIV-1 ssDNA.     

Mechanism of the maturation process of SARS-CoV 3CL protease

Severe acute respiratory syndrome (SARS) is an emerging infectious disease caused by a novel human coronavirus. Viral maturation requires a main protease (3CL(pro)) to cleave the virus-encoded polyproteins. We report here that the 3CL(pro) containing additional N- and/or C-terminal segments of the polyprotein sequences undergoes autoprocessing and yields the mature protease in vitro. The dimeric three-dimensional structure of the C145A mutant protease shows that the active site of one protomer binds with the C-terminal six amino acids of the protomer from another asymmetric unit, mimicking the product-bound form and suggesting a possible mechanism for maturation. The P1 pocket of the active site binds the Gln side chain specifically, and the P2 and P4 sites are clustered together to accommodate large hydrophobic side chains. The tagged C145A mutant protein served as a substrate for the wild-type protease, and the N terminus was first digested (55-fold faster) at the Gln(-1)-Ser1 site followed by the C-terminal cleavage at the Gln306-Gly307 site. Analytical ultracentrifuge of the quaternary structures of the tagged and mature proteases reveals the remarkably tighter dimer formation for the mature enzyme (K(d) = 0.35 nm) than for the mutant (C145A) containing 10 extra N-terminal (K(d) = 17.2 nM) or C-terminal amino acids (K(d) = 5.6 nM). The data indicate that immature 3CL(pro) can form dimer enabling it to undergo autoprocessing to yield the mature enzyme, which further serves as a seed for facilitated maturation. Taken together, this study provides insights into the maturation process of the SARS 3CL(pro) from the polyprotein and design of new structure-based inhibitors.     

Structure of human phosphopantothenoylcysteine synthetase at 2.3 A resolution

The structure of human phosphopantothenoylcysteine (PPC) synthetase was determined at 2.3 A resolution. PPC synthetase is a dimer with identical monomers. Some features of the monomer fold resemble a group of NAD-dependent enzymes, while other features resemble the ribokinase fold. The ATP, phosphopantothenate, and cysteine binding sites were deduced from modeling studies. Highly conserved ATP binding residues include Gly43, Ser61, Gly63, Gly66, Phe230, and Asn258. Highly conserved phosphopantothenate binding residues include Asn59, Ala179, Ala180, and Asp183 from one monomer and Arg55' from the adjacent monomer. The structure predicts a ping pong mechanism with initial formation of an acyladenylate intermediate, followed by release of pyrophosphate and attack by cysteine to form the final products PPC and AMP.     

Synthetic "interface" peptides alter dimeric assembly of the HIV 1 and 2 proteases.

Retroviral proteases are obligate homodimers and play an essential role in the viral life cycle. Dissociation of dimers or prevention of their assembly may inactivate these enzymes and prevent viral maturation. A salient structural feature of these enzymes is an extended interface composed of interdigitating N- and C-terminal residues of both monomers, which form a four-stranded beta-sheet. Peptides mimicking one beta-strand (residues 95-99), or two beta-strands (residues 1-5 plus 95-99 or 95-99 plus 95-99) from the human immunodeficiency virus 1 (HIV1) interface were shown to inhibit the HIV1 and 2 proteases (PRs) with IC50's in the low micromolar range. These interface peptides show cognate enzyme preference and do not inhibit pepsin, renin, or the Rous sarcoma virus PR, indicating a degree of specificity for the HIV PRs. A tethered HIV1 PR dimer was not inhibited to the same extent as the wild-type enzymes by any of the interface peptides, suggesting that these peptides can only interact effectively with the interface of the two-subunit HIV PR. Measurements of relative dissociation constants by limit dilution of the enzyme show that the one-strand peptide causes a shift in the observed Kd for the HIV1 PR. Both one- and two-strand peptides alter the monomer/dimer equilibrium of both HIV1 and HIV2 PRs. This was shown by the reduced cross-linking of the HIV2 PR by disuccinimidyl suberate in the presence of the interface peptides. Refolding of the HIV1 and HIV2 PRs with the interface peptides shows that only the two-strand peptides prevent the assembly of active PR dimers. Although both one- and two-strand peptides seem to affect dimer dissociation, only the two-strand peptides appear to block assembly. The latter may prove to be more effective backbones for the design of inhibitors directed toward retroviral PR dimerization in vivo.     

Assembly and processing of avian retroviral gag polyproteins containing linked protease dimers.

Assembly and maturation of retroviral particles requires the aggregation and controlled proteolytic cleavage of polyprotein core precursors by a precursor-encoded protease (PR). Active, mature retroviral PR is a dimer, and the accumulation of precursors at sites of assembly may facilitate subunit interaction and subsequent activation of this enzyme. In addition, it has been suggested that cellular cytoplasmic components act as inhibitors of PR activity, so that processing is delayed until the nascent virions leave this compartment and separate from the surface of host cells. To investigate the mechanisms that control PR activity during virus assembly, we studied the in vivo processing of retroviral gag precursors that contain tandemly linked PR subunits in which dimerization is concentration independent. Sequences encoding four different linked protease dimers were independently joined to the end of the Rous sarcoma virus (RSV) gag gene in a simian virus 40-based plasmid vector which expresses a myristoylated gag precursor upon transfection of COS-1 cells. Three of these plasmids produced gag precursors that were incorporated into viruslike particles and proteolytically cleaved by the dimers to mature core proteins that were indistinguishable from the processed products of wild-type gag. The amount of viral gag protein that was assembled and packaged in these transfections was inversely related to the relative proteolytic activities of the linked PR dimers. The fourth gag precursor, which contained the most active linked PR dimer, underwent rapid intracellular processing and did not form viruslike particles. In the absence of the plasma membrane targeting signal, processing of all four linked PR dimer-containing gag precursors was completed entirely within the cell. From these results, we conclude that the delay in polyprotein core precursor processing that occurs during normal virion assembly does not depend on a cytoplasmic inhibitor of PR activity. We suggest that dimer formation is not only necessary but may be sufficient for the initiation of PR-directed maturation of gag and gag-pol precursors.     

Detection of large COOH-terminal domains processed from the precursor of Serratia marcescens serine protease in the outer membrane of Escherichia coli.

The Serratia marcescens serine protease gene encoding a 1,045-amino-acid precursor protein of 112 kDa directs excretion of the mature protease of ca. 58 kDa through the outer membrane of Escherichia coli. A typical signal peptide of 27 amino acids and a large COOH-terminal domain of the precursor are both functionally essential for the excretion of the mature protease into the medium. Sequence analysis of the fragment peptides of the mature protease as well as site-directed mutagenesis indicated that the COOH-terminus of the mature enzyme was Asp645. By using the polyclonal antibody against the 112-kDa precursor protein, not only the intact precursor but also two proteins, C-1 (40 kDa) and C-2 (38 kDa), corresponding to the processed COOH-terminal domains were detected in the insoluble fraction of E. coli cells. Further fractionation by sucrose density gradient centrifugation showed that C-1 and C-2 were localized in the outer membrane. The NH2-terminal residues of C-1 and C-2 were determined to be Ala702 and Phe717, respectively. All these data suggest that the precursor is cleaved at three positions, between Asp645-Ser646, Glu701-Ala702, and Gly716-Phe717, probably by the self-processing activity in the normal excretion pathway through the outer membrane.