Cationic double-hydrophilic model networks: synthesis,characterization, modeling and protein adsorption studies

Group transfer polymerization (GTP) was used for the preparation of eight networks based on two hydrophilic monomers, 2-(dimethylamino)ethyl methacrylate (DMAEMA) and poly(ethylene glycol) methacrylate (PEGMA). Ethylene glycol dimethacrylate (EGDMA) served as the cross-linker, whereas 1,4-bis(methoxytrimethylsiloxymethylene)cyclohexane (MTSMC) was used as a bifunctional initiator. Seven of the networks had linear segments of accurate molecular weight between the cross-links, i.e., they were model networks, whereas the eighth was an equimolar randomly cross-linked network. Five of the seven model networks were based on ABA triblock copolymers with PEGMA midblocks and DMAEMA endblocks, in which the DMAEMA/PEGMA ratio was varied. The remaining two model networks were equimolar isomers, the one based on BAB triblocks (with a DMAEMA midblock) and the other based on the statistical copolymer. The degrees of swelling of all of the networks were measured as a function of pH and were found to increase below pH 7. The degrees of swelling at low pH values increased with the percentage of the DMAEMA monomer, which is ionized under these conditions. These swelling results were confirmed qualitatively by theoretical calculations. Finally, the pH-dependence of the adsorption of the proteins pepsin, bovine serum albumin, and lysozyme onto one of the model networks was studied.     

Synthesis, characterization, and DNA adsorption studies of ampholytic model conetworks based on cross-linked star copolymers

Five model conetworks based on cross-linked star ampholytic copolymers were synthesized by group transfer polymerization. The ampholytic copolymers were based on two hydrophilic monomers: the positively ionizable 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the negatively ionizable methacrylic acid (MAA). Ethylene glycol dimethacrylate was used as the cross-linker. These five ampholytic model conetworks were isomers based on equimolar DMAEMA-MAA copolymer stars of different architectures: heteroarm (two), star block (two), and statistical. The two networks based on the homopolymer stars were also synthesized. The MAA units were introduced via the polymerization of tetrahydropyranyl methacrylate and the acid hydrolysis of the latter after network formation. All the precursors to the (co)networks were characterized in terms of their molecular weights using gel permeation chromatography (GPC). The mass of the extractables from the (co)networks was measured and characterized in terms of molecular weight and composition using GPC and proton nuclear magnetic resonance (1H NMR) spectroscopy, respectively. The degrees of swelling (DS) of all the ampholytic conetworks were measured as a function of pH and were found to present a minimum at a pH value which was taken as the isoelectric point, pI. The DS and the pI values did not present a dependence on conetwork architecture. Finally, DNA adsorption studies onto the ampholyte conetworks indicated that DNA binding was governed by electrostatics.     

Amphiphilic model conetworks based on cross-linked star copolymers of benzyl methacrylate and 2-(dimethylamino)ethyl methacrylate: synthesis, characterization, and DNA adsorption studies

Six amphiphilic model conetworks of a new structure, that of cross-linked "in-out" star copolymers, were synthesized by the group transfer polymerization (GTP) of the hydrophobic monomer benzyl methacrylate (BzMA) and the ionizable hydrophilic monomer 2-(dimethylamino)ethyl methacrylate (DMAEMA) in a one-pot preparation. The synthesis took place in tetrahydrofuran (THF) using tetrabutylammonium bibenzoate (TBABB) as the catalyst, 1-methoxy-1-(trimethylsiloxy)-2-methyl-propene (MTS) as the initiator, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. Three heteroarm star-, two star block-, one statistical copolymer star-, and one homopolymer star-based networks were prepared. The synthesis of these star-based networks involved four to six steps, including the preparation of the linear (co)polymers, the "arm-first" and the "in-out" star copolymers, and finally the network. The precursors and the extractables were characterized using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) spectroscopy. The degrees of swelling (DSs) of all the networks were measured in THF, while the aqueous DSs were measured as a function of pH. The DSs at low pH were higher than those at neutral or high pH because of the protonation of the DMAEMA units and were found to be dependent on the structure of the network. The DSs in THF were higher than those in neutral water and were independent of the structure. Finally, DNA adsorption studies onto the networks indicated that the DNA binding was governed by electrostatics.     

Synthesis, characterization, and evaluation as transfection reagents of double-hydrophilic star copolymers: effect of star architecture

Five star polymers of the ionizable hydrophilic 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic methoxy hexa(ethylene glycol) methacrylate (HEGMA) were prepared by group transfer polymerization (GTP) using ethylene glycol dimethacrylate (EGDMA) as coupling agent. In particular, four isomeric star copolymers, one heteroarm, two star block and one statistical star, with 90% mol DMAEMA and 10% mol HEGMA, plus one star homopolymer of DMAEMA with degrees of polymerization of the arms equal to 20 were synthesized. The polymers were characterized in terms of their molar masses (MMs) and compositions using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) spectroscopy, respectively. The hydrodynamic diameters in water indicated some aggregation for all the star polymers except for the statistical copolymer star, while the pK values of the DMAEMA units were around 7 for all star polymers. All the star polymers were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 bearing the enhanced green fluorescent protein (EGFP) as the reporter gene. All four star copolymers showed decreased toxicity compared to that of the DMAEMA star homopolymer for the same amounts of star polymer tested. The star block copolymer with outer DMAEMA blocks exhibited the highest overall transfection efficiency, 11%, compared to that of all the star polymers examined in this study. This efficiency was the same as that of the commercially available transfection reagent SuperFect.     

Synthesis and hydration properties of pH-sensitive p(HEMA)-based hydrogels containing 3-(trimethoxysilyl)propyl methacrylate

An amphiphilic hydrogel network was synthesized from a cross-linked poly(2-hydroxyethyl methacrylate) backbone copolymerized with the monomers 3-(trimethoxysilyl)propyl methacrylate (PMA) and dimethylaminoethyl methacrylate (DMAEMA) using tetraethylene glycol diacrylate (TEGDA) as cross-linker and using the radical initiator system comprising N,N,N',N'-tetramethylethylenediamine and ammonium peroxydisulfate. The degree of hydration of hydrogel slabs was investigated as functions of varying monomer compositions and cross-link density and as a function of pH and ionic strength of the bathing medium. As much as a 45% increase in hydration was observed for hydrogels containing 15 mol % DMAEMA upon reducing the pH of the bathing medium from 8.0 to 2.0. This confirms the pH-modulated swelling of amine-containing hydrogels. Increasing the concentration of TEGDA cross-linker from 3 to 12 mol % in a 10 mol % DMAEMA-containing hydrogel resulted in only a 10% reduction in the degree of hydration of the gel. There was, however, a 40-50% reduction in the degree of hydration of a 15 mol % DMAEMA hydrogel upon increasing the molar composition of PMA from 0 up to 20 mol %. The presence of PMA confers hydrophobic character that reduces hydration and introduces additional cross-links that reduce network mesh size. The water content of the hydrogel was consistently higher in buffers of lower ionic strength. The reversible pH-dependent swelling observed in these studies, along with the control of cross-link density afforded by the PMA component, endows these biocompatible materials with potential for use in pH-controlled drug delivery of more hydrophobic drugs and present new compositions for in vitro and in vivo biocompatibility studies.     

Synthesis, characterization, and evaluation as transfection reagents of ampholytic star copolymers: effect of star architecture

Five star polymers based on the positively ionizable hydrophilic 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the hydrophobic but hydrolyzable tetrahydropyranyl methacrylate (THPMA) were prepared by group-transfer polymerization (GTP) using ethylene glycol dimethacrylate (EGDMA) as the coupling agent. In particular, four isomeric star copolymers (one heteroarm, two star block, and the statistical star), all with a 3:1 DMAEMA:THPMA molar ratio, plus one star homopolymer of DMAEMA, with degrees of polymerization of the arms equal to 15, were synthesized. After star polymer preparation and preliminary characterization, the THPMA units were hydrolyzed to negatively ionizable hydrophilic methacrylic acid (MAA) untis, thus yielding star polyampholytes. All the star polyampholytes as well as the commercially available transfection reagent SuperFect were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 bearing the enhanced green fluorescent protein (EGFP) as the reporter gene. The transfection efficiency was affected by star architecture. The DMAEMA15-star-MAA5 polyampholyte presented the highest transfection efficiency of all the star polymers tested but lower than that of SuperFect at its optimum conditions. All four star copolymers showed decreased toxicity compared to the DMAEMA star homopolymer for the same amounts of star polymer tested and also compared to the SuperFect at its optimum conditions.     

Synthesis of biocompatible PEG-Based star polymers with cationic and degradable core for siRNA delivery

Star polymers with poly(ethylene glycol) (PEG) arms and a degradable cationic core were synthesized by the atom transfer radical copolymerization (ATRP) of poly(ethylene glycol) methyl ether methacrylate macromonomer (PEGMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA), and a disulfide dimethacrylate (cross-linker, SS) via an "arm-first" approach. The star polymers had a diameter ~15 nm and were degraded under redox conditions by glutathione treatment into individual polymeric chains due to cleavage of the disulfide cross-linker, as confirmed by dynamic light scattering. The star polymers were cultured with mouse calvarial preosteoblast-like cells, embryonic day 1, subclone 4 (MC3T3-E1.4) to determine biocompatibility. Data suggest star polymers were biocompatible, with ≥ 80% cell viability after 48 h of incubation even at high concentration (800 μg/mL). Zeta potential values varied with N/P ratio confirming complexation with siRNA. Successful cellular uptake of the star polymers in MC3T3-E1.4 cells was observed by confocal microscopy and flow cytometry after 24 h of incubation.     

ATRP synthesis of amphiphilic random,gradient, and block copolymers of 2-(dimethylamino)ethyl methacrylate and n-butyl methacrylate in aqueous media

Amphiphilic random, gradient, and block copolymers of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and n-butyl methacrylate (BMA) were synthesized by atom transfer radical polymerization (ATRP) in water/2-propanol mixtures using a methoxy-poly(ethylene glycol) (MPEG) (M(n) = 2000) macroinitiator. Kinetic studies indicate that the copolymerization is well controlled with molecular weights increasing linearly with conversion. Copolymers with molecular weights up to M(n) = 34000 and low polydispersities (M(w)/M(n) = 1.11-1.47) were prepared. The reactivity ratios were calculated for the copolymerizations catalyzed by CuBr/bpy, (r(DMAEMA) = 1.07, r(BMA) = 1.24). The thermosensitivity and aggregation properties of the random, gradient, and block copolymers significantly depended on the architecture of the copolymers. The lower critical solution temperature of MPEG-b-PDMAEMA(84) was 38 degrees C (5 wt % in water).     

PSMA Antibody-Conjugated Pentablock Copolymer Nanomicellar Formulation for Targeted Delivery to Prostate Cancer

The main purpose of this study was to develop a prostate-specific membrane antigen (PSMA) antibody-conjugated drug-loaded nanomicelles using MPEG--PLA-PCL-PLA-PEG-NH2 pentablock copolymer for targeted delivery of hydrophobic anticancer drugs to prostate cancer cells. During this experiment, monomers of L-lactide, ε-caprolactone, poly(ethylene glycol)-methyl ether, and poly(ethylene glycol)-NH2 were used to prepare pentablock copolymer using the ring opening technique. The pentablock nanomicellar (PBNM) formulation was prepared by the evaporation-rehydration method. The resultant pentablock nanomicelles were then conjugated with PSMA antibody resulting in PSMA-Ab-PTX-PBNM. Both the block copolymers and the nanomicelles were analyzed by hydrogen nuclear magnetic resonance (H-NMR), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The obtained nanomicelles (NM) were then analyzed for size and zeta potential using dynamic light scattering-dynamic laser scattering (DLS) and then further submitted to H-NMR and TEM analyses. The XRD, FTIR, and the H-NMR analyses confirmed the structure of the pentablock copolymers. The average size for conjugated nanomicellar was 45 nm?±?2.5 nm. The average (ζ-potential) was around ??28 mV. H-NMR and FTIR analysis done on PSMA-coupled paclitaxel-loaded PBNM showed peaks characteristic of the drug (paclitaxel) and the polymer, confirming the successful encapsulation. TEM analysis showed well-defined spherical morphology and confirmed the size range obtained by the DLS. In vitro release studies revealed sustained slow of PTX in phosphate buffer solution (PBS). Confocal scanning microscopy (TEM) of coumarin6-loaded in PBNM indicated that pentablock nanomicelles were internalized into the prostate cancer (PC-3) cells. Cell proliferation assay showed that nanomicelles ferried paclitaxel into the PC-3 cells and subsequently reduced the cell proliferation. The results depict PTX-PBNM-Ab as a suitable carrier for targeted delivery of drugs to prostate cancer cells.     

Hydrophilic cationic star homopolymers based on a novel diethanol-N-methylamine dimethacrylate cross-linker for siRNA transfection: synthesis, characterization, and evaluation

Four cationic hydrophilic star homopolymers based on the novel hydrophilic, positively ionizable cross-linker bis(methacryloyloxyethyl)methylamine (BMEMA) were synthesized using sequential group transfer polymerization (GTP) and were, subsequently, evaluated for their ability to deliver siRNA to mouse myoblast cells. The nominal degrees of polymerization (DP) of the arms were varied from 10 to 50. For the polymerizations, 2-(dimethylamino)ethyl methacrylate (DMAEMA) was employed as the hydrophilic, positively ionizable monomer. For comparison, four linear DMAEMA homopolymers were also synthesized, whose nominal DPs were the same as those of the arms of the stars. The numbers of arms of the star homopolymers were determined using gel permeation chromatography with static light scattering detection, and found to range from 7 to 19, whereas the hydrodynamic diameters of the star homopolymers in aqueous solution were measured using dynamic light scattering and found to increase with the arm DP from 13 to 26 nm. The presence of the hydrophilic BMEMA cross-linker enabled the solubility of all star homopolymers in pure water. The cloud points of the star homopolymers in aqueous solution increased with the arm DP from 23 to 29 °C, while the cloud points of the linear homopolymers were found to decrease with their DP, from 42 to 32 °C. The effective pK values of the DMAEMA units were in the range of 6.9 to 7.3 for the star homopolymers, whereas they ranged between 7.3 and 7.4 for the linear homopolymers. Subsequently, all star and linear homopolymers were evaluated for their ability to deliver siRNA to the C2C12 mouse myoblast cell line, expressing the reporter enhanced green fluorescent protein (EGFP). All star homopolymers and the largest linear homopolymer presented significant EGFP suppression, whereas the smaller linear homopolymers were much less efficient. For all star homopolymers and the largest linear homopolymer both the EGFP suppression and the cell toxicity increased with polymer loading. The siRNA-specific EGFP suppression, calculated by subtracting the effect of cell toxicity on EGFP suppression, slightly increased with star polymer loading for the two smaller stars, whereas it presented a shallow maximum and a decrease for the other two stars. Moreover, the siRNA-specific EGFP suppression also increased slightly with the DP of the arms of the DMAEMA star homopolymers. Overall, the EGFP suppression efficiencies with the present star homopolymers were at levels comparable to that of the commercially available transfection reagent Lipofectamine.     

Cell-culturing characteristics of newly developed PHEMA microcarriers: their use with BHK21 cells.

Baby hamster kidney (BHK) fibroblasts, as model cells, have been proliferated on acrylic based microcarriers. Microcarriers were prepared by a novel suspension polymerization of acrylic monomers. Hydroxyethyl methacrylate was the basic monomer. Ethylene glycol dimethacrylate was used as the cross-linker. A hydrophobic comonomer, namely, methyl methacrylate, was included in order to adjust the hydrophilicity of the resultant matrix. An acrylic comonomer with positively charged tertiary amine groups, i.e., dimethylaminoethyl methacrylate, was also added in order to optimize the surface charge of the carriers. The adhesion, spreading, and growth characteristics of BHK cells on these novel beads were studied either in stationary or in submerged culture conditions. The results demonstrate that the cell attachment and growth can be controlled by changing the degree of charge and the hydrophilicity of the poly(hydroxyethyl methacrylate) matrix.     

Thermocontrol of solute permeation across polymer membrane composed of poly(N,N-dimethylaminoethyl methacrylate) and its copolymers

Polymer membranes composed ofN,N-dimethylaminoethyl methacrylate (DMAEMA) and acrylamide (AAm) (or ethyl acrylamide (EAAm)) were prepared to demonstrate the thermocontrol of solute permeation. Poly DMEMA has a lower critical solution temperature (LCST) at around 50°C in water. With the copolymerization of DMAEMA with AAm (or EAAm), a shift in the LCST to a lower temperature was observed, probably due to the formation of hydrogen bonds between the amide andN,N-dimethylamino groups. However, the temperature-induced phase transition of poly (DMAEMA-co-EAAm) did not show a similar trend to that of poly (DMAEMA-co-AAm) in the gel state. The hydrogen bonds in poly (DMAEMA-co-EAAm) were significantly disrupted with the formation of a gel network, which led to a difference in the swelling behavior of polymer gels in response to temperature. To apply these polymers to temperature-sensitive solute permeation, polymer membranes were prepared. The permeation pattern of hydrocortisone, used as the model solute, was explained based on the temperature-sensitive swelling behavior of the polymer membranes.     

Preparation of cholesteric (hydroxypropyl)cellulose/polymer networks and ion-mediated control of their optical properties

(Hydroxypropyl)cellulose (HPC)/vinyl polymer networks were synthesized in film form from liquid-crystalline solutions of HPC in a mixed solvent of methacrylate monomer/methanol/water (2:1:2 in weight) containing cross-linking agents, via photopolymerization of the methacrylate monomer. Di(ethylene glycol) monomethyl ether methacrylate (DEGMEM) or 2-hydroxypropyl methacrylate (HPMA) was used as the polymerizing monomer, and tetra(ethylene glycol) diacrylate and glutaraldehyde were the cross-linkers for the monomers and HPC, respectively. The polymer composite films, HPC/PDEGMEM and HPC/PHPMA, prepared at ca. 60-70 wt % concentrations of HPC in the starting solutions, were iridescently colored due to the selective light reflection, originating from the cholesteric helical arrangement carried over successively into the network system. When the cholesteric films were immersed and swollen in water containing an inorganic neutral salt, their coloration and optical turbidity varied according to a strength of 'chaotropicity' of the impregnant ions. This ionic effect may be interpreted as essentially identical with that found formerly in the coexistent salt-sort dependence of the cholesteric pitch and lower critical solution temperature for HPC aqueous solutions. It is also demonstrated that visual appearance of the swollen networks can be changed by application of an electric potential of practical magnitude between both edges of the samples of rectangular shape.     

Nanoscopic cationic methacrylate star homopolymers: synthesis by group transfer polymerization, characterization and evaluation as transfection reagents

Seven star polymers with degrees of polymerization (DPs) of the arms from 10 to 100 and dimensions in the nanometer range were prepared using sequential group transfer polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA, hydrophilic positively ionizable monomer) and ethylene glycol dimethacrylate (hydrophobic neutral cross-linker). The polymers were characterized in tetrahydrofuran by gel permeation chromatography and static light scattering to determine the molecular weights and the weight-average number of arms for each sample. The number of arms of the star polymers varied from 20 to 72. Aqueous solutions of the star polymers were studied by turbidimetry, hydrogen ion titration, and dynamic light scattering to determine their cloud points, pKs, and hydrodynamic diameters. The cloud points of the larger star polymers, with arm DP 30-100, were found to be 29-34 degrees C, almost independent of the DP of the arms. Similarly, the pKs of all star polymers were calculated to range between 6.7 and 7.0, again independent of the arm DP. In contrast, the hydrodynamic diameters of the star polymers strongly depended on the DP of the arms. In particular, by increasing the DP of the arms from 20 to 100, the hydrodynamic diameters in water increased from 7 to 31 nm. All star polymers were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 with the enhanced green fluorescent protein as the reporter gene. Our results showed that as the DP of the arms of the DMAEMA star homopolymers increased from 10 to 100, the overall transfection efficiency decreased, with the star polymer with DP of the arms of 10 emerging as the best transfection reagent. Systematic variation of the amounts of star polymer and plasmid DNA used in the transfections led to an optimization of the performance of this star polymer, yielding overall transfection efficiencies of 15%, comparable to the optimum overall transfection efficiency of the commercially available transfection reagent SuperFect of 13%.     

Structure-property relationships in poly(ethylene glycol)-protein hydrogel systems made from various proteins

A series of poly(ethylene glycol)-protein hydrogels were synthesized with different proteins, and the resultant structures were characterized in terms of swelling behavior and mechanical, optical, and drug release properties. Irrespectively of the protein involved in polymerization with poly(ethylene glycol), all studied systems were found to be loosely cross-linked networks, where both polymer and protein are completely solvated, enabling as high as 96% water content. Changes in the apparent transparency of the hydrogels synthesized with different proteins were attributed to the ability of the protein component to self-associate via hydrophobic interactions. The polyelectrolyte nature of the protein component governs the pH responsiveness of the network, which manifested itself in a pH-dependent mechanism of swelling and drug release. It was demonstrated that there is great opportunity to modulate the final characteristics of the hydrogel system to fit the need of specific biomedical application.     

Synthesis and characterization of chitosan-based hydrogels

Biocompatible hydrogels based on water-soluble chitosan–ethylene glycol acrylate methacrylate (CS–EGAMA) and polyethylene glycol diamethacrylate (PEGDMA) were synthesized by photopolymerization. Characterization of morphology, weight loss, water state of hydrogel, pH-sensitivity and cytotoxicity were investigated by scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), swelling test and methylthiazolydiphenyl-tetrazolium bromide (MTT) assay. The results indicated that the hydrogels were sensitive to pH of the medium, no cytotoxicity for L929 and SW1353, satisfactory for the composite to be used in bioapplications.     

Design and biophysical characterization of bioresponsive degradable poly(dimethylaminoethyl methacrylate) based polymers for in vitro DNA transfection

Water-soluble, degradable polymers based on poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) with low cytotoxicity and good p-DNA transfection efficiency are highlighted in this article. To solve the nondegradability issue of PDMAEMA, new polymers based on DMAEMA and 5,6-benzo-2-methylene-1,3-dioxepane (BMDO) for gene transfection were synthesized. A poly(ethylene oxide) (PEO) azo-initiator was used as free-radical initiator. PEGylation was performed to improve water solubility and to reduce cytotoxicity of the polymers. The resulting polymers contain hydrolyzable ester linkages in the backbone and were soluble in water even with very high amounts of ester linkages. These degradable copolymers showed significantly less toxicity with a MTT assay using L929 cell lines and demonstrated promising DNA transfection efficiency when compared with the gold standard poly(ethyleneimine). Bioresponsive properties of the corresponding quaternized DMAEMA based degradable polymers were also studied. Although the quaternized DMAEMA copolymers showed enhanced water solubility, they were inferior in gene transfection and toxicity as compared to the unquaternized copolymers.     

Synthesis of a mesoporous functional copolymer bead carrier and its properties for glucoamylase immobilization

A series of mesoporous and hydrophilic novel bead carriers containing epoxy groups were synthesized by modified inverse suspension polymerization. Glycidyl methacrylate and acryloyloxyethyl trimethyl ammonium chloride were used as the monomers, and divinyl benzene, allyl methacrylate, and ethylene glycol dimethacrylate as crosslinking agents, respectively. The resulting carriers were employed in the immobilization of glucoamylase (Glu) with covalent bond between epoxy groups and enzymes. The activity recovery of the three series of immobilized Glus could reach 76%, 79%, and 86%, respectively. The immobilized Glus exhibit excellent stability and reusability than that of the free ones.     

Glycol methacrylate as an embedding medium for bone

A simple and reliable procedure for embedding undecalcified trabecular bone tissue in noncommercial glycol methacrylate (GMA) has been developed. The embedding mixture includes a monomer, methacrylic acid hydroxyethyl ester; a copolymer, methacrylic acid butyl ester; a cross-linker, ethylene glycol dimethacrylate; a catalyst, Luperco; a chemical initiator (N,N-dimethylaniline) and, to avoid excessive elevation of temperature during polymerization, a heat moderator, alpha-terpinene. The appropriate proportions of these components have been selected to give specimens which can be easily sectioned with classical microtomes and which do not swell but spread evenly on a water surface. Since polymerization occurs at -4 C, the method allows demonstration of such enzymatic activities as acid and alkaline phosphatase and carbonic anhydrase. It provides excellent preservation of bone tissue and in studies of bone metabolism allows histomorphometry as well as visualization of fluorescent labeling and radioactive markers. The cost is significantly less than available commercial kits. In our hands glycol methacrylate is at present more useful than methyl methacrylate and is used in our laboratory for routine embedding of bone tissue.     

Cell proliferation and cell sheet detachment from the positively and negatively charged nanocomposite hydrogels

The charged nanocomposite hydrogels (NC gels) were synthesized by copolymerization of positively or negatively chargeable monomer with N‐isopropylacrylamide (NIPAm) in the aqueous suspension of hectorite clay. The ionic NC gels preserved the thermo‐responsibility with the phase‐transition temperature below 37°C. The L929 cell proliferation was sensitive to charge polarity and charge density. As compared to the PNIPAm NC gel, the cationic NC gels with <5 mol % of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) showed improved cell proliferation, whereas the cells grew slowly on the gels with negatively charged 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPSNa). By lowering temperature, rapid cell sheet detachment was observed from the surface of ionic NC gels with 1 mol % of ionizable monomers. However, lager amount of AMPSNa or DMAEMA did not support rapid cell sheet detachment, probably owing to the adverse swelling effects and/or enhanced electrostatic attraction. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 58–65, 2014.