Control of substrate specificity by active-site residues in nitrobenzene dioxygenase

Nitrobenzene 1,2-dioxygenase from Comamonas sp. strain JS765 catalyzes the initial reaction in nitrobenzene degradation, forming catechol and nitrite. The enzyme also oxidizes the aromatic rings of mono- and dinitrotoluenes at the nitro-substituted carbon, but the basis for this specificity is not understood. In this study, site-directed mutagenesis was used to modify the active site of nitrobenzene dioxygenase, and the contribution of specific residues in controlling substrate specificity and enzyme performance was evaluated. The activities of six mutant enzymes indicated that the residues at positions 258, 293, and 350 in the alpha subunit are important for determining regiospecificity with nitroarene substrates and enantiospecificity with naphthalene. The results provide an explanation for the characteristic specificity with nitroarene substrates. Based on the structure of nitrobenzene dioxygenase, substitution of valine for the asparagine at position 258 should eliminate a hydrogen bond between the substrate nitro group and the amino group of asparagine. Up to 99% of the mononitrotoluene oxidation products formed by the N258V mutant were nitrobenzyl alcohols rather than catechols, supporting the importance of this hydrogen bond in positioning substrates in the active site for ring oxidation. Similar results were obtained with an I350F mutant, where the formation of the hydrogen bond appeared to be prevented by steric interference. The specificity of enzymes with substitutions at position 293 varied depending on the residue present. Compared to the wild type, the F293Q mutant was 2.5 times faster at oxidizing 2,6-dinitrotoluene while retaining a similar Km for the substrate based on product formation rates and whole-cell kinetics.     

Evolution of a new bacterial pathway for 4-nitrotoluene degradation

Bacteria that assimilate synthetic nitroarene compounds represent unique evolutionary models, as their metabolic pathways are in the process of adaptation and optimization for the consumption of these toxic chemicals. We used Acidovorax sp. strain JS42, which is capable of growth on nitrobenzene and 2-nitrotoluene, in experiments to examine how a nitroarene degradation pathway evolves when its host strain is challenged with direct selective pressure to assimilate non-native substrates. Although the same enzyme that initiates the degradation of nitrobenzene and 2-nitrotoluene also oxidizes 4-nitrotoluene to 4-methylcatechol, which is a growth substrate for JS42, the strain is incapable of growth on 4-nitrotoluene. Using long-term laboratory evolution experiments, we obtained JS42 mutants that gained the ability to grow on 4-nitrotoluene via a new degradation pathway. The underlying basis for this new activity resulted from the accumulation of specific mutations in the gene encoding the dioxygenase that catalyses the initial oxidation of nitroarene substrates, but at positions distal to the active site and previously unknown to affect activity in this or related enzymes. We constructed additional mutant dioxygenases to identify the order of mutations that led to the improved enzymes. Biochemical analyses revealed a defined, step-wise pathway for the evolution of the improved dioxygenases.     

Structural insight into the dioxygenation of nitroarene compounds: the crystal structure of nitrobenzene dioxygenase

Nitroaromatic compounds are used extensively in many industrial processes and have been released into the environment where they are considered environmental pollutants. Nitroaromatic compounds, in general, are resistant to oxidative attack due to the electron-withdrawing nature of the nitro groups and the stability of the benzene ring. However, the bacterium Comamonas sp. strain JS765 can grow with nitrobenzene as a sole source of carbon, nitrogen and energy. Biodegradation is initiated by the nitrobenzene dioxygenase (NBDO) system. We have determined the structure of NBDO, which has a hetero-hexameric structure similar to that of several other Rieske non-heme iron dioxygenases. The catalytic subunit contains a Rieske iron-sulfur center and an active-site mononuclear iron atom. The structures of complexes with substrates nitrobenzene and 3-nitrotoluene reveal the structural basis for its activity with nitroarenes. The substrate pocket contains an asparagine residue that forms a hydrogen bond to the nitro-group of the substrate, and orients the substrate in relation to the active-site mononuclear iron atom, positioning the molecule for oxidation at the nitro-substituted carbon.     

Studies of specificity and catalysis in trypsin by structural analysis of site-directed mutants

We are probing the determinants of catalytic function and substrate specificity in serine proteases by kinetic and crystallographic characterization of genetically engineered site-directed mutants of rat trypsin. The role of the aspartyl residue at position 102, common to all members of the serine protease family, has been tested by substitution with asparagine. In the native enzyme, Asp102 accepts a hydrogen bond from the catalytic base His57, which facilitates the transfer of a proton from the enzyme nucleophile Ser195 to the substrate leaving group. At neutral pH, the mutant is four orders of magnitude less active than the naturally occurring enzyme, but its binding affinity for model substrates is virtually undiminished. Crystallographic analysis reveals that Asn102 donates a hydrogen bond to His57, forcing it to act as donor to Ser195. Below pH 6, His57 becomes statistically disordered. Presumably, the di-protonated population of histidyl side chains are unable to hydrogen bond to Asn102. Steric conflict may cause His57 to rotate away from the catalytic site. These results suggest that Asp102 not only provides inductive and orientation effects, but also stabilizes the productive tautomer of His57. Three experiments were carried out to alter the substrate specificity of trypsin. Glycine residues at positions 216 and 226 in the substrate-binding cavity were replaced by alanine residues in order to differentially affect lysine and arginine substrate binding. While the rate of catalysis by the mutant enzymes was reduced in the mutant enzymes, their substrate specificity was enhanced relative to trypsin. The increased specificity was caused by differential effects on the catalytic activity towards arginine and lysine substrates. The Gly----Ala substitution at 226 resulted in an altered conformation of the enzyme which is converted to an active trypsin-like conformation upon binding of a substrate analog. In a third experiment, Lys189, at the bottom of the specificity pocket, was replaced with an aspartate with the expectation that specificity of the enzyme might shift to aspartate. The mutant enzyme is not capable of cleaving at Arg and Lys or Asp, but shows an enhanced chymotrypsin-like specificity. Structural investigations of these mutants are in progress.     

Synthesis of substituted catechols using nitroarene dioxygenases

The nitroarene dioxygenases are in the class of Rieske iron-containing oxygenases that incorporate atmospheric oxygen into substrates via electrophilic attack on the substrate. In their native role, the nitroarene dioxygenases start degradative pathways by hydroxylating nitro-substituted, and adjacent unsubstituted carbons of nitroaromatic compounds. The reaction yields the corresponding nitro-cis-cyclohexadienediol, which is unstable and spontaneously re-aromatizes to form a catechol and nitrite. In bacterial metabolism, the specificity of the hydroxylation determines subsequent steps in degradation pathways. Experiments were done to find whether the specificity could be exploited to direct the hydroxylation of multiply substituted aromatic substrates and thereby produce novel catechols. Recombinant strains carrying genes for nitroarene dioxygenases were used for transformation of various substituted nitroaromatic compounds. The reactions were analyzed using HPLC to track substrate consumption and product formation, then GC–MS and NMR to identify the reaction products. A number of substituted catechols were obtained using the recombinant biocatalysts. The nitro-substituted carbon was the primary site for dioxygenase hydroxylation. When substrates included nitro and halogen substituents, the halogen-substituted positions were also targeted, but less frequently than the nitro-substituted site. The production of catechols was limited in batch fermentations, likely due to toxicity of the quinones that result from air oxidation of catechols. The nitroarene dioxygenases will serve as catalysts for direct synthesis of highly substituted catechols, however, the reaction conditions must be engineered to overcome product toxicity and allow sustained accumulation of catecholic products.     

Orthric Rieske dioxygenases for degrading mixtures of 2,4-dinitrotoluene/naphthalene and 2-amino-4,6-dinitrotoluene/4-amino-2,6-dinitrotoluene

Pollutants are frequently found as mixtures yet it is difficult to engineer enzymes with broad substrate ranges on aromatics. Inspired by the archetypal nitroarene dioxygenase, which shares its electron transport with a salicylate monooxygenase, we have created an innovative and general approach to expand the substrate range of dioxygenase enzymes in a single cell. We have developed here a series of novel, hybrid dioxygenase enzymes that function with a single ferredoxin reductase and ferredoxin that are used to transport two electrons from nicotinamide adenine dinucleotide to the two independent terminal oxygenases. Each independent alpha-oxygenase may then be used simultaneously to create orthric enzymes that degrade mixtures of environmental pollutants. Specifically, we created a hybrid dioxygenase system consisting of naphthalene dioxygenase/dinitrotoluene dioxygenase to simultaneously degrade 2,4-dinitrotoluene and naphthalene (neither enzyme alone had significant activity on both compounds) and dinitrotoluene dioxygenase/nitrobenzene dioxygenase to simultaneously degrade the frequently encountered 2,4,6-trinitrotoluene reduction products 2-amino-4,6-dinitrotoluene and 4-amino-2,6-dinitrotoluene.     

Subtle Difference between Benzene and Toluene Dioxygenases of Pseudomonas putida

Benzene dioxygenase and toluene dioxygenase from Pseudomonas putida have similar catalytic properties, structures, and gene organizations, but they differ in substrate specificity, with toluene dioxygenase having higher activity toward alkylbenzenes. The catalytic iron-sulfur proteins of these enzymes consist of two dissimilar subunits, α and β; the α subunit contains a [2Fe-2S] cluster involved in electron transfer, the catalytic nonheme iron center, and is also responsible for substrate specificity. The amino acid sequences of the α subunits of benzene and toluene dioxygenases differ at only 33 of 450 amino acids. Chimeric proteins and mutants of the benzene dioxygenase α subunit were constructed to determine which of these residues were primarily responsible for the change in specificity. The protein containing toluene dioxygenase C-terminal region residues 281 to 363 showed greater substrate preference for alkyl benzenes. In addition, we identified four amino acid substitutions in this region, I301V, T305S, I307L, and L309V, that particularly enhanced the preference for ethylbenzene. The positions of these amino acids in the α subunit structure were modeled by comparison with the crystal structure of naphthalene dioxygenase. They were not in the substrate-binding pocket but were adjacent to residues that lined the channel through which substrates were predicted to enter the active site. However, the quadruple mutant also showed a high uncoupled rate of electron transfer without product formation. Finally, the modified proteins showed altered patterns of products formed from toluene and ethylbenzene, including monohydroxylated side chains. We propose that these properties can be explained by a more facile diffusion of the substrate in and out of the substrate cavity.     

Subtle difference between benzene and toluene dioxygenases of Pseudomonas putida

Benzene dioxygenase and toluene dioxygenase from Pseudomonas putida have similar catalytic properties, structures, and gene organizations, but they differ in substrate specificity, with toluene dioxygenase having higher activity toward alkylbenzenes. The catalytic iron-sulfur proteins of these enzymes consist of two dissimilar subunits, alpha and beta; the alpha subunit contains a [2Fe-2S] cluster involved in electron transfer, the catalytic nonheme iron center, and is also responsible for substrate specificity. The amino acid sequences of the alpha subunits of benzene and toluene dioxygenases differ at only 33 of 450 amino acids. Chimeric proteins and mutants of the benzene dioxygenase alpha subunit were constructed to determine which of these residues were primarily responsible for the change in specificity. The protein containing toluene dioxygenase C-terminal region residues 281 to 363 showed greater substrate preference for alkyl benzenes. In addition, we identified four amino acid substitutions in this region, I301V, T305S, I307L, and L309V, that particularly enhanced the preference for ethylbenzene. The positions of these amino acids in the alpha subunit structure were modeled by comparison with the crystal structure of naphthalene dioxygenase. They were not in the substrate-binding pocket but were adjacent to residues that lined the channel through which substrates were predicted to enter the active site. However, the quadruple mutant also showed a high uncoupled rate of electron transfer without product formation. Finally, the modified proteins showed altered patterns of products formed from toluene and ethylbenzene, including monohydroxylated side chains. We propose that these properties can be explained by a more facile diffusion of the substrate in and out of the substrate cavity.     

Examining the role of hydrogen bonding interactions in the substrate specificity for the loading step of polyketide synthase thioesterase domains

The final step in polyketide synthase-mediated biosynthesis of macrocyclic polyketides is thioesterase (TE)-catalyzed cyclization of a linear polyketide acyl chain. TEs are highly specific in the chemistry they catalyze. Understanding the molecular basis for substrate specificity of TEs is crucial for engineering these enzymes to macrocyclize non-native linear substrates. We investigated the role of hydrogen bonding interactions in the substrate specificity of formation of an acyl-enzyme intermediate for the TE from the 6-deoxyerythronolide B biosynthetic pathway. Thirteen single site-directed mutants were constructed, via removal of side chain hydrogen bonding groups from the binding cavity. Specificity constants for four different substrates with and without hydrogen bond donors and acceptors were determined for the five active mutants. The relative magnitude of specificity constants for substrates did not change for the mutant TEs. Circular dichroism spectroscopy was used to show that the majority of the catalytically inactive mutants did not fold. Two mutations were identified that enabled mutant TEs to form a folded but catalytically inactive tertiary structure. Our data do not support a role for hydrogen bonding in mediating substrate specificity of bacterial polyketide synthase TEs. The highly conserved polar residues in the binding cavity appear to stabilize the unusual substrate channel, which passes through the enzyme. We propose that hydrophobic interactions between the binding cavity and substrate drive substrate specificity, as is seen in many protein-carbohydrate recognition events. This hypothesis is in agreement with high-resolution structural data for nonhydrolyzable acyl-enzyme intermediates from the picromycin TE.     

Substrate Specificities of Hybrid Naphthalene and 2,4-Dinitrotoluene Dioxygenase Enzyme Systems

Bacterial three-component dioxygenase systems consist of reductase and ferredoxin components which transfer electrons from NAD(P)H to a terminal oxygenase. In most cases, the oxygenase consists of two different subunits (α and β). To assess the contributions of the α and β subunits of the oxygenase to substrate specificity, hybrid dioxygenase enzymes were formed by coexpressing genes from two compatible plasmids in Escherichia coli. The activities of hybrid naphthalene and 2,4-dinitrotoluene dioxygenases containing four different β subunits were tested with four substrates (indole, naphthalene, 2,4-dinitrotoluene, and 2-nitrotoluene). In the active hybrids, replacement of small subunits affected the rate of product formation but had no effect on the substrate range, regiospecificity, or enantiomeric purity of oxidation products with the substrates tested. These studies indicate that the small subunit of the oxygenase is essential for activity but does not play a major role in determining the specificity of these enzymes.     

Salicylate 1,2-dioxygenase from Pseudaminobacter salicylatoxidans: crystal structure of a peculiar ring-cleaving dioxygenase

The crystallographic structure of salicylate 1,2-dioxygenase (SDO), a new ring fission dioxygenase from the naphthalenesulfonate-degrading strain Pseudaminobacter salicylatoxidans BN12, which oxidizes salicylate to 2-oxohepta-3,5-dienedioic acid by a novel ring fission mechanism, has been solved by molecular replacement techniques and refined at 2.9 Å resolution (R_free 26.1%; R-factor 19.3%). SDO is a homo-tetramer member of type III extradiol-type dioxygenases with a subunit topology characteristic of the bicupin β-barrel folds. The catalytic center contains a mononuclear iron(II) ion coordinated to three histidine residues (His119, His121, and His160), located within the N-terminal domain in a solvent-accessible pocket. SDO is markedly different from the known gentisate 1,2-dioxygenases (GDO) or 1-hydroxy-2-naphthoate dioxygenase because of its unique ability to oxidatively cleave numerous salicylates, gentisates and 1-hydroxy-2-naphthoate with high catalytic efficiency. The comparison of the structure and substrate specificity for a series of different substrates with the corresponding data for several GDOs and the docking of salicylates/gentisates in the active site of SDO, allowed the identification of several active site residues responsible for differences of substrate specificity. In particular, a more defined electron density of the N-terminal region allowed the discovery of a novel structure fragment in SDO previously unobserved in GDO. This region contributes several residues to the active site that influence substrate specificity for both of these enzymes. Implications on the catalytic mechanism are discussed.     

Mycobacterium tuberculosis Rv3406 Is a Type II Alkyl Sulfatase Capable of Sulfate Scavenging

The genome of Mycobacterium tuberculosis (Mtb) encodes nine putative sulfatases, none of which have a known function or substrate. Here, we characterize Mtb’s single putative type II sulfatase, Rv3406, as a non-heme iron (II) and α-ketoglutarate-dependent dioxygenase that catalyzes the oxidation and subsequent cleavage of alkyl sulfate esters. Rv3406 was identified based on its homology to the alkyl sulfatase AtsK from Pseudomonas putida. Using an in vitro biochemical assay, we confirmed that Rv3406 is a sulfatase with a preference for alkyl sulfate substrates similar to those processed by AtsK. We determined the crystal structure of the apo Rv3406 sulfatase at 2.5 Å. The active site residues of Rv3406 and AtsK are essentially superimposable, suggesting that the two sulfatases share the same catalytic mechanism. Finally, we generated an Rv3406 mutant (Δrv3406) in Mtb to study the sulfatase’s role in sulfate scavenging. The Δrv3406 strain did not replicate in minimal media with 2-ethyl hexyl sulfate as the sole sulfur source, in contrast to wild type Mtb or the complemented strain. We conclude that Rv3406 is an iron and α-ketoglutarate-dependent sulfate ester dioxygenase that has unique substrate specificity that is likely distinct from other Mtb sulfatases.     

Novel inhibitor for prolyl tripeptidyl aminopeptidase from Porphyromonas gingivalis and details of substrate-recognition mechanism

A new inhibitor, H-Ala-Ile-pyrrolidin-2-yl boronic acid, was developed as an inhibitor against prolyl tripeptidyl aminopeptidase with a K_i value of 88.1 nM. The structure of the prolyl tripeptidyl aminopeptidase complexed with the inhibitor (enzyme-inhibitor complex) was determined at 2.2 Å resolution. The inhibitor was bound to the active site through a covalent bond between Ser603 and the boron atom of the inhibitor. This structure should closely mimic the structure of the reaction intermediate between the enzyme and substrate. We previously proposed that two glutamate residues, Glu205 and Glu636, are involved in the recognition of substrates. In order to clarify the function of these glutamate residues in substrate recognition, three mutant enzymes, E205A, E205Q, and E636A were generated by site-directed mutagenesis. The E205A mutant was expressed as an inclusion body. The E205Q mutant was expressed in soluble form, but no activity was detected. Here, the structures of the E636A mutant and its complex with the inhibitor were determined. The inhibitor was located at almost the same position as in the wild-type enzyme-inhibitor complex. The amino group of the inhibitor interacted with Glu205 and the main-chain carbonyl group of Gln203. In addition, a water molecule in the place of Glu636 of the wild-type enzyme interacted with the amino group of the inhibitor. This water molecule was located near the position of Glu636 in the wild-type and formed a hydrogen bond with Gln203. The k_cat/K_M values of the E636A mutant toward the two substrates used were smaller than those of the wild-type by two orders of magnitude. The K_i value of our inhibitor for the E636A mutant was 48.8 μM, which was 554-fold higher than that against the wild-type enzyme. Consequently, it was concluded that Glu205 and Glu636 are significant residues for the N-terminal recognition of a substrate.     

Site Directed Mutagenesis of Amino Acid Residues at the Active Site of Mouse Aldehyde Oxidase AOX1

Mouse aldehyde oxidase (mAOX1) forms a homodimer and belongs to the xanthine oxidase family of molybdoenzymes which are characterized by an essential equatorial sulfur ligand coordinated to the molybdenum atom. In general, mammalian AOs are characterized by broad substrate specificity and an yet obscure physiological function. To define the physiological substrates and the enzymatic characteristics of mAOX1, we established a system for the heterologous expression of the enzyme in Eschericia coli. The recombinant protein showed spectral features and a range of substrate specificity similar to the native protein purified from mouse liver. The EPR data of recombinant mAOX1 were similar to those of AO from rabbit liver, but differed from the homologous xanthine oxidoreductase enzymes. Site-directed mutagenesis of amino acids Val806, Met884 and Glu1265 at the active site resulted in a drastic decrease in the oxidation of aldehydes with no increase in the oxidation of purine substrates. The double mutant V806E/M884R and the single mutant E1265Q were catalytically inactive enzymes regardless of the aldehyde or purine substrates tested. Our results show that only Glu1265 is essential for the catalytic activity by initiating the base-catalyzed mechanism of substrate oxidation. In addition, it is concluded that the substrate specificity of molybdo-flavoenzymes is more complex and not only defined by the three characterized amino acids in the active site.     

Crystal structures of salicylate 1,2-dioxygenase-substrates adducts: A step towards the comprehension of the structural basis for substrate selection in class III ring cleaving dioxygenases

The crystallographic structures of the adducts of salicylate 1,2-dioxygenase (SDO) with substrates salicylate, gentisate and 1-hydroxy-2-naphthoate, obtained under anaerobic conditions, have been solved and analyzed. This ring fission dioxygenase from the naphthalenesulfonate-degrading bacterium Pseudaminobacter salicylatoxidans BN12, is a homo-tetrameric class III ring-cleaving dioxygenase containing a catalytic Fe(II) ion coordinated by three histidine residues. SDO is markedly different from the known gentisate 1,2-dioxygenases or 1-hydroxy-2-naphthoate dioxygenases, belonging to the same class, because of its unique ability to oxidatively cleave salicylate, gentisate and 1-hydroxy-2-naphthoate. The crystal structures of the anaerobic complexes of the SDO reveal the mode of binding of the substrates into the active site and unveil the residues which are important for the correct positioning of the substrate molecules. Upon binding of the substrates the active site of SDO undergoes a series of conformational changes: in particular Arg127, His162, and Arg83 move to make hydrogen bond interactions with the carboxyl group of the substrate molecules. Unpredicted concerted displacements upon substrate binding are observed for the loops composed of residues 40-43, 75-85, and 192-198 where several aminoacidic residues, such as Leu42, Arg79, Arg83, and Asp194, contribute to the closing of the active site together with the amino-terminal tail (residues 2-15). Differences in substrate specificity are controlled by several residues located in the upper part of the substrate binding cavity like Met46, Ala85, Trp104, and Phe189, although we cannot exclude that the kinetic differences observed could also be generated by concerted conformational changes resulting from amino-acid mutations far from the active site.     

Active site residues controlling substrate specificity in 2-nitrotoluene dioxygenase from Acidovorax sp. strain JS42

Acidovorax (formerly Pseudomonas) sp. strain JS42 utilizes 2-nitrotoluene as sole carbon, nitrogen, and energy source. 2-Nitrotoluene 2,3-dioxygenase (2NTDO) catalyzes the initial step in 2-nitrotoluene degradation by converting 2-nitrotoluene to 3-methylcatechol. In this study, we identified specific amino acids at the active site that control specificity. The residue at position 350 was found to be critical in determining both the enantiospecificity of 2NTDO with naphthalene and the ability to oxidize the ring of mononitrotoluenes. Substitution of Ile350 by phenylalanine resulted in an enzyme that produced 97% (+)-(1R, 2S)-cis-naphthalene dihydrodiol, in contrast to the wild type, which produced 72% (+)-(1R, 2S)-cis-naphthalene dihydrodiol. This substitution also severely reduced the ability of the enzyme to produce methylcatechols from nitrotoluenes. Instead, the methyl group of each nitrotoluene isomer was preferentially oxidized to form the corresponding nitrobenzyl alcohol. Substitution of a valine at position 258 significantly changed the enantiospecificity of 2NTDO (54% (−)-(1S, 2R)-cis-naphthalene dihydrodiol formed from naphthalene) and the ability of the enzyme to oxidize the aromatic ring of nitrotoluenes. Based on active site modeling using the crystal structure of nitrobenzene 1,2 dioxygenase from Comamonas sp. JS765, Asn258 appears to contribute to substrate specificity through hydrogen bonding to the nitro group of nitrotoluenes.     

Modification of near active site residues in organophosphorus hydrolase reduces metal stoichiometry and alters substrate specificity

Organophosphorus hydrolase (OPH, EC 8.1.3.1) is a dimeric, bacterial enzyme that detoxifies many organophosphorus neurotoxins by hydrolyzing a variety of phosphonate bonds. The histidinyl residues at amino acid positions 254 and 257 are located near the bimetallic active site present in each monomer. It has been proposed that these residues influence catalysis by interacting with active site residues and the substrate in the binding pocket. We replaced the histidine at position 254 with arginine (H254R) and the one at position 257 with leucine (H257L) independently to form the single-site-modified enzymes. The double modification was also constructed to incorporate both changes (H254R/H257L). Although native OPH has two metals at each active site (four per dimer), all three of these altered enzymes possessed only two metals per dimer while retaining considerable enzymatic activity for the preferred phosphotriester (P-O bond) substrate, paraoxon (5-100% kcat). The three altered enzymes achieved a 2-30-fold increase in substrate specificity (kcat/Km) for demeton S (P-S bond), an analogue for the chemical warfare agent VX. In contrast, the substrate specificity for diisopropyl fluorophosphonate (P-F bond) was substantially decreased for each of these enzymes. In addition, H257L and H254R/H257L showed an 11- and 18-fold increase, respectively, in specificity for NPPMP, the analogue for the chemical warfare agent soman. These results demonstrate the ability to significantly enhance the specificity of OPH for various substrates by site-specific modifications, and it is suggested that changes in metal requirements may affect these improved catalytic characteristics by enhancing structural flexibility and improving access of larger substrates to the active site, while simultaneously decreasing the catalytic efficiency for smaller substrates.     

Insights into role of the hydrogen bond networks in substrate recognition by UDP-GalNAc 4-epimerases

UDP-hexose 4-epimerases are critical in galactose metabolism and often important in lipopolysaccharide biosynthesis as well. Three groups of these enzymes have been reported based on their substrate specificity towards non-acetylated substrates (group 1), dual specificity towards N-acetylated and non-acetylated substrates (group 2) and specificity towards N-acetylated substrates (group 3). We recently reported the structure of a novel UDP-GalNAc 4-epimerase called WbgU and based on the structure proposed a model of specific substrate recognition by UDP-GalNAc 4-epimerases. In this work, we present an analysis of the proposed model of substrate recognition using site-directed mutagenesis of WbgU and crystal structure of the His305Ala mutant. This investigation reveals that the wild-type activity of WbgU is retained in most single-point mutants targeting the active site. However, a graded loss in activity is observed in double-and triple-point mutants with the quadruple-point mutant being completely inactive corroborating the proposed rationale of substrate recognition. Furthermore, crystal structure of the His305Ala mutant shows that the structure is significantly similar to the wild-type WbgU, albeit a loss in the critical hydrogen bond network seated at His305 and ensuing minor conformational changes. It is inferred that the specific and non-specific interactions throughout the active site confer it sufficient elasticity to sustain wild-type activity for several of the single-point mutations.     

Substrate Specificity of Cytoplasmic N-Glycosyltransferase

N-Linked protein glycosylation is a very common post-translational modification that can be found in all kingdoms of life. The classical, highly conserved pathway entails the assembly of a lipid-linked oligosaccharide and its transfer to an asparagine residue in the sequon NX(S/T) of a secreted protein by the integral membrane protein oligosaccharyltransferase. A few species in the class of γ-proteobacteria encode a cytoplasmic N-glycosylation system mediated by a soluble N-glycosyltransferase (NGT). This enzyme uses nucleotide-activated sugars to modify asparagine residues with single monosaccharides. As these enzymes are not related to oligosaccharyltransferase, NGTs constitute a novel class of N-glycosylation catalyzing enzymes. To characterize the NGT-catalyzed reaction, we developed a sensitive and quantitative in vitro assay based on HPLC separation and quantification of fluorescently labeled substrate peptides. With this assay we were able to directly quantify glycopeptide formation by Actinobacillus pleuropneumoniae NGT and determine its substrate specificities: NGT turns over a number of different sugar donor substrates and allows for activation by both UDP and GDP. Quantitative analysis of peptide substrate turnover demonstrated a strikingly similar specificity as the classical, oligosaccharyltransferase-catalyzed N-glycosylation, with NX(S/T) sequons being the optimal NGT substrates.     

Engineering of substrate specificity of D-amino acid oxidase from the yeast Trigonopsis variabilis: Directed mutagenesis of Phe258 residue

Natural D-amino acid oxidases (DAAO) are not suitable for selective determination of D-amino acids due to their broad substrate specificity profiles. Analysis of the 3D-structure of the DAAO enzyme from the yeast Trigonopsis variabilis (TvDAAO) revealed the Phe258 residue located at the surface of the protein globule to be in the entrance to the active site. The Phe258 residue was mutated to Ala, Ser, and Tyr residues. The mutant TvDAAOs with amino acid substitutions Phe258Ala, Phe258Ser, and Phe258Tyr were purified to homogeneity and their thermal stability and substrate specificity were studied. These substitutions resulted in either slight stabilization (Phe258Tyr) or destabilization (Phe258Ser) of the enzyme. The change in half-inactivation periods was less than twofold. However, these substitutions caused dramatic changes in substrate specificity. Increasing the side chain size with the Phe258Tyr substitution decreased the kinetic parameters with all the D-amino acids studied. For the two other substitutions, the substrate specificity profiles narrowed. The catalytic efficiency increased only for D-Tyr, D-Phe, and D-Leu, and for all other D-amino acids this parameter dramatically decreased. The improvement of catalytic efficiency with D-Tyr, D-Phe, and D-Leu for TvDAAO Phe258Ala was 3.66-, 11.7-, and 1.5-fold, and for TvDAAO Phe258Ser it was 1.7-, 4.75-, and 6.61-fold, respectively.