Aseptic loosening of the femoral component in cemented total hip replacement

The purpose of this study was to identify factors which predispose to aseptic loosening of the femoral component in cemented total hip replacement. Its design was based on rigid selection critria, so that successful and loose replacements which employed the same surgical technique were compared. Measurements of patient anatomy and of the insertion of the femoral component were made, by an accurate computer technique, on initial post-operative radiographs. Loosening was associated with heavier patients with a wider medullary canal which was flared proximally. This difference in anatomy led to differing distributions of cement in the successful and loose replacements. Medial cement-bone demarcation, at the mid-stem level, was also associated with loosening. These findings indicate the importance of optimizing the size of the prosthesis with respect to the femoral morphology.     

Declining needs for total joint replacements for rheumatoid arthritis

This millennium brings new views to rheumatology. Total joint replacement surgery is needed less often as active treatment strategies combined with availability of new medications has led to more effective rheumatoid arthritis control. This was beautifully shown in a recent issue of Arthritis Research & Therapy by a Swedish study that uses data from national registers and compares incidence rates for total hip and knee arthroplasties before and after the establishment of biologic agents use for rheumatoid arthritis     

Robust optimization of total joint replacements incorporating environmental variables.

Direct search techniques for the optimal design of biomechanical devices are computationally intensive requiring many iterations before converging to a global solution. This, along with the incorporation of environmental variables such as multiple loading conditions and bone properties, makes direct search techniques infeasible. In this study, we introduced new methods that are based on the statistical design and analysis of computer experiments to account efficiently for environmental variables. Using data collected at a relatively small set of training sites, the method employs a computationally inexpensive predictor of the structural response that is statistically motivated. By using this predictor in place of the simulator (e.g., finite element model), a sufficient number of iterations can be performed to facilitate the optimization of the complex system. The applicability of these methods was demonstrated through the design of a femoral component for total hip arthroplasty incorporating variations in joint force orientation and cancellous bone properties. Beams on elastic foundation (BOEF) finite element models were developed to simulate the structural response. These simple models were chosen for their short computation time. This allowed us to represent the actual structural response surface by an exhaustive enumeration of the design and environmental variable space, and provided a means by which to validate the statistical predictor. We were able to predict the structural response and the optimal design accurately using only 16 runs of the computer code. The general trends predicted by the BOEF models were in agreement with previous three-dimensional finite element computer simulations, and experimental and clinical results, which demonstrated that the important features of intramedullary fixation systems were captured. These results indicate that the statistically based optimization methods are appropriate for optimization studies using computationally demanding models.     

Relation between mouth and haematogenous infection in total joint replacements.

OBJECTIVE--To investigate the source of infections associated with orthopaedic prostheses. DESIGN--Analysis of four infections of prosthetic joints with case records; minimum inhibitory and minimum bactericidal concentrations and sodium dodecylsulphate polyacrylamide gel electrophoresis of the cell wall polypeptides of the Streptococcus sanguis isolates from the mouth and infected prostheses; examination of the patients'' mouths for periodontal disease and caries. SUBJECTS--Four adults (three men) aged 58-83. RESULTS--For each patient the strain of S sanguis isolated from the mouth was indistinguishable from that isolated from the prosthesis. All patients had severe periodontal disease and caries. CONCLUSIONS--The mouth was probably the source of bacterial infection in the prosthetic joints of these patients; the route of infection was possibly haematogenous. Incipient oral infection should be treated before joint replacement, and oral health should be maintained indefinitely.     

Incidence of metal sensitivity in patients with total joint replacements.

Sensitivity to chromium, cobalt, nickel, molybdenum, vanadium, and titanium was studied by patch tests in 50 patients who had received total joint replacements. Nineteen (38%) were sensitive to one or more of the metals. In 23 patients non-traumatic failure of the prosthesis had occurred, and 15 of these patients were sensitive to metal. Out of 27 patients with no evidence of prosthesis loosening, four were sensitive to nickel and cobalt or nickel only. Dermatological reactions occurred in 13 patients after surgery; in only eight, however, was there evidence of metal sensitivity. These findings indicate that metal-on-metal total joint replacements may sensitise the patient to metals contained in the prosthesis. Although there is a high incidence of prosthesis failure among metal-sensitive patients it remains uncertain whether the loosening causes the sensitisation or vice versa.     

Berberine and musculoskeletal disorders: The therapeutic potential and underlying molecular mechanisms

BackgroundMusculoskeletal disorders are a group of disorders that affect the joints, bones, and muscles, causing long-term disability. Berberine, an isoquinoline alkaloid, has been previously established to exhibit beneficial properties in preventing various diseases, including musculoskeletal disorders.PurposeThis review article aims to recapitulate the therapeutic potential of berberine and its mechanism of action in treating musculoskeletal disorders.MethodsA wide range of literature illustrating the effects of berberine in ameliorating musculoskeletal disorders was retrieved from online electronic databases (PubMed and Medline) and reviewed.ResultsBerberine may potentially retard the progression of osteoporosis, osteoarthritis and rheumatoid arthritis. Limited studies reported the effects of berberine in suppressing the proliferation of osteosarcoma cells. These beneficial properties of berberine are mediated in part through its ability to target multiple signaling pathways, including PKA, p38 MAPK, Wnt/β-catenin, AMPK, RANK/RANKL/OPG, PI3K/Akt, NFAT, NF-κB, Hedgehog, and oxidative stress signaling. In addition, berberine exhibited anti-apoptotic, anti-inflammatory, and immunosuppressive properties.ConclusionThe current evidence indicates that berberine may be effective in preventing musculoskeletal disorders. However, findings from in vitro and in vivo investigations await further validation from human clinical trial.     

Design and analysis of robust total joint replacements: finite element model experiments with environmental variables

Computer simulation of orthopaedic devices can be prohibitively time consuming, particularly when assessing multiple design and environmental factors. Chang et al. (1999) address these computational challenges using an efficient statistical predictor to optimize a flexible hip implant, defined by a midstem reduction, subjected to multiple environmental conditions. Here, we extend this methodology by: (1) explicitly considering constraint equations in the optimization formulation, (2) showing that the optimal design for one environmental distribution is robust to alternate distributions, and (3) illustrating a sensitivity analysis technique to determine influential design and environmental factors. A thin midstem diameter with a short stabilizing distal tip minimized the bone remodeling signal while maintaining satisfactory stability. Hip joint force orientation was more influential than the effect of the controllable design variables on bone remodeling and the cancellous bone elastic modulus had the most influence on relative motion, both results indicating the importance of including uncontrollable environmental factors. The optimal search indicated that only 16 to 22 computer simulations were necessary to predict the optimal design, a significant savings over traditional search techniques.     

Bioinformatic analysis suggests potential mechanisms underlying parasitoid venom evolution and function

Hymenopteran parasitoid wasps are a diverse collection of species that infect arthropod hosts and use factors found in their venoms to manipulate host immune responses, physiology, and behaviour. Whole parasitoid venoms have been profiled using proteomic approaches, and here we present a bioinformatic characterization of the venom protein content from Ganaspis sp. 1, a parasitoid that infects flies of the genus Drosophila. We find evidence that diverse evolutionary processes including multifunctionalization, co-option, gene duplication, and horizontal gene transfer may be acting in concert to drive venom gene evolution in Ganaspis sp.1. One major role of parasitoid wasp venom is host immune evasion. We previously demonstrated that Ganaspis sp. 1 venom inhibits immune cell activation in infected Drosophila melanogaster hosts, and our current analysis has uncovered additional predicted virulence functions. Overall, this analysis represents an important step towards understanding the composition and activity of parasitoid wasp venoms.     

Metastatic spread: mechanisms and therapies

Although metastatic spread is the most frequent cause of deaths in cancer patients, there are very few drugs specifically targeting this process. Bases for a new antimetastatic drug discovery strategy are weak because a great number of unknowns characterizes the whole understanding of the metastatic cascade mechanisms. Moreover, the current experimental models are too simplistic and do not account for the complexity of the phenomenon. Some targets have been identified but too few are validated. Among them, metastasis suppressor genes seem to be the most promising. In spite of this, during the last years, a dozen of molecules which fulfill the definition of a specific metastatic drug, namely that inhibit metastases without altering growth of the primary tumor (which can be eradicated by surgery), have been identified and tried out to assess the proof of the concept. The continuation of this effort would be more efficient if the objectives were defined more precisely. It is particularly important to distinguish molecules aimed at preventing metastic cell spreading at the primary tumour early stage and molecules which have to induce a regression of established metastases or to inhibit the transition from disseminated occult tumour cells to dormant micrometastasis. This second goal is a priori more relevant in the current clinical setting where detection of the early metastatic spread is very difficult, and therefore it should focus a greater effort of the scientific community.     

Constraints and fixation for implanted joint replacements

Observations made on both cemented and uncemented joint prostheses after about two years of use show a layer of fibrous tissue next to the bone. This fibrous layer smooths over surface features up to l mm in size, and must be assumed to be weak in tension and shear. Prosthesis-bone interfaces should therefore be designed to transmit all forces acting on the prosthesis as compressive stresses. The forces acting across prostheses are controlled by the constraints exerted by the articulating surfaces; if the useful ligaments present are allowed to do their job of transmitting tension, the articulating surfaces can be designed to transmit only such forces and moments as can safely be transmitted across the prosthesis-bone interfaces.     

Cytokines and osteolysis around total hip prostheses

The aim of this work is to assess the correlation between the osteolysis around the prosthesis and the presence of cytokines favouring inflammation in the tissues at the interface between loosened prosthesis and bone. In this study, twenty-nine patients that underwent revision surgery were examined. Bioptic samples were collected at the interface between bone and implant both at the stem and socket level. Semiquantitative immunohistochemistry was performed to detect interleukin 1 alpha, interleukin 1 beta, interleukin 6 and tumour necrosis factor, cytokines that directly cause bone resorption and indirectly induce synthesis of other bone resorbing cytokines. Wear particles were identified and quantified by light microscopy. Radiographic evidence for osteolysis was scored by the Engh and Bobyn score. In tissues collected at the interface, the percentage of cells positive to IL1, IL6 and particularly to TNF increased in relation to the tissues collected at the interface with stable components. The cells occurring in the new capsule do not secrete cytokines in quantities that can be related to severity of wear. Cemented prostheses showed higher incidence of severe osteolysis, and higher levels of cytokines. It can be concluded that TNF, and to a lesser extent IL1 and IL6, are positively related to the severity of osteolysis around the prosthesis and therefore a pharmacological treatment can be hypothesized with anti-inflammatory or anti-cytokine drugs in order to limit or to avoid prosthesis loosening.     

Tea and health: the underlying mechanisms

Detailed multidisciplinary research on the effect of tea and the associated tea polyphenols has led to major advances on the underlying mechanisms. In most studies, green and black tea have similar effects, four of which are reviewed in this paper. 1) Tea polyphenols are powerful antioxidants that may play a role in lowering the oxidation of LDL-cholesterol, with a consequent decreased risk of heart disease, and also diminish the formation of oxidized metabolites of DNA, with an associated lower risk of specific types of cancer. 2) Tea and tea polyphenols selectively induce Phase I and Phase II metabolic enzymes that increase the formation and excretion of detoxified metabolites of carcinogens. 3) Tea lowers the rate of cell replication and thus the growth and development of neoplasms. 4) Tea modifies the intestinal microflora, reducing undesirable bacteria and increasing beneficial bacteria. The accumulated knowledge suggests that regular tea intake by humans might provide an approach to decrease the incidence of and mortality from major chronic diseases.     

Charcot-Marie-Tooth disease: emerging mechanisms and therapies

Charcot-Marie-Tooth disease is the most common inherited disorder of the peripheral nervous system. The disease is characterized by a progressive muscle weakness and atrophy, sensory loss, foot (and hand) deformities and steppage gait. While many of the genes associated with axonal CMT have been identified, to date it is unknown which mechanism(s) causes the disease. However, genetic findings indicate that the underlying mechanisms mainly converge to the axonal cytoskeleton. In this review, we will summarize the evidence for this pathogenic convergence. Furthermore, recent work with new transgenic mouse models has led to the identification of histone deacetylase 6 as a potential therapeutic target for inherited peripheral neuropathies. This enzyme deacetylates microtubules and plays a crucial role in the regulation of axonal transport. These findings offer new perspectives for a potential therapy to treat axonal Charcot-Marie-Tooth disease and other neurodegenerative disorders characterized by axonal transport defects.     

Digger wasp versus cricket: mechanisms underlying the total paralysis caused by the predator's venom

The data presented here describe neurophysiological experiments addressing the question of cellular mechanisms underlying the total paralysis of locomotor behavior in crickets occurring after being stung by females of the digger wasp species Liris niger. The Liris venom effects have been studied by both in vivo recordings from identified neurons of the well-described giant fiber pathway and in vitro recordings from cultured neurons isolated from the terminal ganglion of crickets. The total paralysis of the prey is characterized by a general block of action potential generation as well as by a block of synaptic transmission. Intracellular recordings from neurons in intact ganglia under single electrode voltage-clamp conditions, as well as whole-cell patch-clamp recordings from cultured cricket neurons consistently show that the block of action potential generation by the Liris venom is due to a block of voltage-gated sodium inward currents in neurons of the stung ganglia. Furthermore, our data provide evidence that the Liris venom also blocks calcium currents in identified neurosecretory neurons. On the other hand, outward currents are not affected by the Liris venom. The in vitro recordings suggest that the Liris venom contains active venom components, which, at least for the observed block of inward currents, do not require a metabolic modification. Because venom application does not affect the ACh-induced EPSPs in giant interneurons, the Liris venom does not seem to influence the postsynaptic ACh receptors. The possible pre- and postsynaptic sites of venom action and the functional consequences on synaptic transmission within the giant fiber system are discussed.     

Insect duets: underlying mechanisms and their evolution

Abstract. Duetting between the sexes in insects involves the use of airborne acoustic signals, substrate vibration and bioluminescence. Unlike avian duets, in which females may initiate the interaction, among insects the duet starts with the male, and the female usually provides a brief reply. Insect duets are characterized by low variance in the reply latency of the female (the time between a key element in the male call and the onset of the female's response). Duetting is reviewed principally in Orthoptera but also in Plecoptera, Hemiptera, Neuroptera and bioluminescence in the Coleoptera. The mechanisms of the duet are examined first, followed by evolution and the associated change in searching strategies of each sex. As defined, the duet has distinct temporal characteristics and these are compared with acoustic interactions among males in those species that exhibit male–male synchrony and alternation. For insects, the key element of a duet for species' recognition is low variance in the reply latency of females. In cases in which the male's initiating signal is extremely short, reply latencies become indicators of species' recognition. However, in those species in which the initiating male call is under selection through female choice, the male call is predictably longer and occasionally more complex. Under these circumstances, reply latencies often increase, creating an opportunity for alternative male tactics. When alternative tactics exist in nature, males may decrease the intensity of their call, insert a trigger pulse that signals to the female the end of its complex call, or males may even add a masking signal that obscures the competing signal.     

Design of next generation total disk replacements

To improve the treatments for low back pain, new designs of total disk replacement have been proposed. The question is how well these designs can act as a functional replacement of the intervertebral disk. Four finite element models were made, for four different design concepts, to determine how well they can mimic the physiological intervertebral disk mechanical function. The four designs were a homogenous elastomer, a multi-stiffness elastomer, an elastomer with fiber jacket, and a hydrogel with fiber jacket. The best material properties of the four models were determined by optimizing the model behavior to match the behavior of the intervertebral disk in flexion-extension, axial rotation, and lateral bending. It was shown that neither a homogeneous elastomer nor a multi-stiffness elastomer could mimic the non-linear behavior within the physiological range of motion. Including a fiber jacket around an elastomer allowed for physiological motion in all degrees of freedom. Replacing the elastomer by a hydrogel yielded similar good behavior. Mimicking the non-linear behavior of the intervertebral disk, in the physiological range of motion is essential in maintaining and restoring spinal motion and in protecting surrounding tissues like the facet joints or adjacent segments. This was accomplished with designs mimicking the function of the annulus fibrosus.