Differential giemsa staining of sister chromatids after extraction with acids

Chromosomes of Chinese hamster strain cells were air-dried on slides after BrdU substitution for two or three rounds of replication. The preparations were treated with 20% PCA at 55 degrees C for 20-30 min, or 5N HCl at 55 degrees C for 15-20 min. After staining with Giemsa, unifilarly BrdU-substituted chromatids stained faintly and bifilarly substituted chromatids stained darkly. Such a pattern of sister chromatid differential staining was confirmed by the examination of metaphase cells grown with BrdU for three rounds of replication.     

Indirect measurement of the lag time distribution of single cells of Listeria innocua in food

The distribution of log counts at a given time during the exponential growth phase of Listeria innocua measured in food samples inoculated with one cell each was applied to estimate the distribution of the single-cell lag times. Three replicate experiments in broth showed that the distribution of the log counts is a linear mapping of the distribution of the detection times measured by optical density. The detection time distribution reflects the lag time distribution but is shifted in time. The log count distribution was applied to estimate the distributions of the lag times in a liquid dairy product and in liver paté after different heat treatments. Two batches of ca. 100 samples of the dairy product were inoculated and heated at 55 degrees C for 45 min or at 62 degrees C for 2 min, and an unheated batch was incubated at 4 degrees C. The final concentration of surviving bacteria was ca. 1 cell per sample. The unheated cells showed the shortest lag times with the smallest variance. The mean and the variance of the lag times of the surviving cells at 62 degrees C were greater than those of the cells treated at 55 degrees C. Three batches of paté samples were heated at 55 degrees C for 25 min, 62 degrees C for 81 s, or 65 degrees C for 20 s. A control batch was inoculated but not heated. All paté samples were incubated at 15 degrees C. The distribution of the lag times of the cells heated at 55 degrees C was not significantly different from that of the unheated cells. However, at the higher temperatures, 62 degrees C and 65 degrees C, the lag duration was longer and its variance greater.     

Detection of protein-dodecyl sulfate complexes with pinacryptol yellow following electrophoretic separation

A rapid technique for the location of proteins separated electrophoretically in the presence of sodium dodecyl sulfate in just the sample solution is described. This procedure involved the use of pinacryptol yellow to locate the protein-dodecyl sulfate complex in the polyacrylamide gel that previously had been subjected to electrophoresis. With pinacryptol yellow as a means of visualization, the time required for the detection of the protein-dodecyl sulfate bands was greatly reduced due to the elimination of the lengthy staining and destaining procedures.     

Destaining of Coomassie Brilliant Blue R-250-stained polyacrylamide gels with fungal laccase

An enzyme-based method for destaining polyacrylamide gels stained with Coomassie Brilliant Blue R-250 is described. Distilled water supplemented with diluted fermentation broth of a laccase-producing white-rot fungus, Cerrena sp., was used for gel destaining, and a clear gel background was obtained in 2 h at 37 °C. Sensitivity of protein detection was 10 ng. The method did not require organic solvents or changing the destaining solution. Due to simultaneous gel destaining and dye decolorization, the colorless destaining solution can be disposed of directly. Laccase destaining of polyacrylamide gels was simple, efficient, and environmentally friendly.     

Purification and characterization of phosphodiesterase from Crotalus venom.

A procedure for the purification of phosphodiesterase from Crotalus venom on DEAE-cellulose at alkaline pH is described. The enzyme gives a single band in polyacrylamide gels and is free of contaminating nucleolytic enzymes. The molecular weight is about 115000. Concentration in an Amicon ultrafiltrator gave a highly concentrated active enzyme. Phosphodiesterase is relatively stable and can be stored at 4 degrees C in the presence of Mg2 and serum albumin for years. For the detection of contaminating endonuclease, an assay was used in which tRNA was the substrate and possible internal breaks were detected in polyacrylamide gel after denaturation. With bis(p-nitrophenyl) phosphate as substrate, 15mM Mg2 was necessary for optimal activity. The reaction remained linear for at least 15 min at 22 degrees C. At 45 degrees C, the liberation of p-nitrophenol was highest within 25 min of incubation. At 75 degrees C, inactivation of the enzyme occurred after 4 min.     

Determination of urinary thiocyanate and nitrate using fast ion-interaction chromatography

A simple and rapid chromatographic method for determination of nitrite, nitrate and thiocyanate is reported, and applied to the analysis of non-, medium and heavy smokers' urine samples. Ion-interaction liquid chromatography was carried out on a short 30 mm x 4.6 mm C18 column (3 microm particle size) with a mobile phase of 10 mM tetrabutylammonium phosphate in 20% MeOH. The chromatography was performed at an elevated temperature of 45 degrees C, at a flow-rate of 1 ml/min. Detection was by direct UV absorption at 230 nm. Sample preparation involved centrifugation and dilution, followed by sample clean-up on a C18 solid-phase extraction cartridge. The developed method proved both precise (% RSD <2%) and sensitive (standard detection limits <0.1 mg/l), and yielded total run times of under 10 min when applied to urine analysis of smokers and non-smokers, with thiocyanate eluting in under 5 min.     

Isoelectric focusing of complex protein mixtures in the nanogram range in microgels (author's transl)]

A method is described for isolectric focusing of complex protein mixtures in 2, 5 or 10 mul capillaries. For one separation only 15- 50 ng of a protein mixture is needed. Isoelectric focusing is finished after 10 min, staining takes 20 min and destaining approximately 30 min. Using defined mixtures of Servalyt from different pH ranges, isoelectric focusing can be adapted to the protein sample to be fractionated. Protein peaks separated by isoelectric focusing can be electrophoretically eluted and for further analysis refractionated directly in a microgradient gel. The resolution power of microisoelectric focusing is as good as that of the wellknown macroprocedure, as is demonstrated by isoelectric focusing of the water soluble proteins from cerebellum and heart, of rat and human serum and of a human oncocytoma of the thyroid gland.     

Thermal dosimetry of normal porcine tissue

The response of normal porcine fat and muscle to graduated doses of hyperthermia provided by an annularly focused acoustic source was measured. Temperatures and exposure times were varied between 43 degrees C (20-90 min), 45 and 47 degrees C (20-60 min), and 49 degrees C (20 min). Response, based on histologic grading of the treated sites 30 days after exposure, was found to correlate well when mapped against several methods of estimating thermal energy deposition. The threshold for damage production was at or near 43 degrees C. For a given temperature, a nearly exponential increase in relative tissue damage as a function of increased exposure time was found. A twofold increase in tissue damage was produced in fat relative to muscle at any given thermal dose.     

A restaining method to restore faded fluorescence in tissue specimens for quantitative confocal microscopy.

The aim of this study was to develop a procedure to remove the TO-PRO-3 fluorescent dye from tissue sections and restain with TO-PRO-3, still allowing calculation of DNA content and distribution by confocal laser scanning microscopy (CLSM). This would allow repeated measurements on the same tissue sections and prevents loss of tissue material from valuable clinical samples. Thick sections (14 microm) were cut from a paraffin block of adrenal tissue and stained using TO-PRO-3. Image stacks were acquired by CLSM. Thereafter, three destaining approaches were tested based on incubation, at different temperatures and durations, in the medium that is normally used to dissolve TO-PRO-3. The same areas were imaged again to measure residual fluorescence and were subsequently restained and imaged again. The intensity of the images acquired after initial staining and restaining were compared. A number of 3-D (texture) features computed after segmentation of nuclei were compared as well. The best destaining result was obtained by incubation of sections at 37 degrees C in preheated medium twice for 20 min. On average, the 3-D feature values were comparable with those after initial staining. With the described protocol it is possible to remove TO-PRO-3 fluorescence from tissue sections that can successfully be restained with minimal influence on fluorescence intensity and nuclear chromatin distribution.     

Fertilizing capacity of equine spermatozoa stored for 24 hours at 5 or 20 degrees C

A breeding trial was conducted to evaluate the effect of in vitro storage time and temperature on fertilizing capacity of equine spermatozoa. Semen obtained from one stallion and diluted with skim milk-glucose extender was used to artificially inseminate 45 estrussynchronized mares. The mares were assigned to one of three treatment groups (15 mares per group): 1) insemination with fresh semen (collected within 0.5 h of use), 2) insemination with semen stored for 24 h at 20 degrees C or 3) insemination with semen stored for 24 h at 5 degrees C. The mares were inseminated daily during estrus, from the detection of a 35-mm follicle until ovulation, with 250 x 10(6) progressively motile spermatozoa (based on initial sperm motility of fresh semen). Semen samples (n = 35) were evaluated prior to insemination for percentages of total sperm motility (TSM), progressive sperm motility (PSM) and sperm velocity (SV). Single-cycle 15-d pregnancy rates. resulting from insemination with fresh semen, from fresh semen stored for 24 h at 20 degrees C or from semen stored for 24 h at 5 degrees C were the same (11 15 ; 73%). Mean diameters (mm) of 15-d embryonic vesicles were not different (P>0.05) among these three treatment groups (21.5 +/- 2.9, 19.6 +/- 2.6 and 20.5 +/- 3.6, respectively). Ten pregnant mares were aborted on Day 15 of gestation for use in another project. The pregnancy status of the 23 remaining pregnant mares was again determined at 35 to 40 d and 55 to 60 d of gestation. No pregnancy losses occurred during this time period. Mean TSM percentages were different (P<0.05) among the three groups: the fresh semen percentage was 89 +/- 2, semen stored for 24 h at 20 degrees C was 57 +/- 11 and semen stored for 24 h at 5 degrees C was 80 +/- 6. Similar differences were found for mean PSM and SV. Semen storage at either 20 or 5 degrees C for 24 h had no apparent effect on the fertilizing capacity of the extended semen samples; however, the reduction in all motility parameters tested was more dramatic in semen stored at 20 degrees C than that stored at 5 degrees C.     

The kinetics of formation and structure of the low-temperature phase of 1-stearoyl-lysophosphatidylcholine

A combination of differential scanning calorimetry (DSC) and X-ray diffraction have been used to study the kinetics of formation and the structure of the low-temperature phase of 1-stearoyl-lysophosphatidylcholine (18:0-lysoPC). For water contents greater than 40 weight %, DSC shows a sharp endothermic transition at 27 degrees C (delta H = 6.75 kcal/mol) corresponding to a low-temperature phase----micelle transition. This sharp transition is not reversible, but is regenerated in a time and temperature-dependent manner. For example, with incubation at 0 degrees C the maximum transition enthalpy (delta H = 6.75 kcal/mol) is generated in about 45 min after an initial slow nucleation process of approx. 20 min. The kinetics of formation of the low-temperature phase is accelerated at lower temperatures and may be related to the disruption of 18:0-lysoPC micelles by ice crystal formation. X-ray diffraction patterns of 18:0-lysoPC recorded at 10 degrees C over the hydration range 20-80% are characteristic of a lamellar gel phase with tilted hydrocarbon chains with the bilayer repeat distance increasing from 47.6 A at 20% hydration to a maximum of 59.4 A at 39% hydration. At this maximum hydration, approx. 19 molecules of water are bound per molecule of 18:0-lysoPC. Electron density profiles show a phosphate-phosphate distance of 30 A, indicating an interdigitated lamellar gel phase for 18:0-lysoPC at all hydration values. The angle of chain tilt is calculated to be between 20 and 30 degrees. For water contents greater than 40%, this interdigitated lamellar phase converts to the micellar phase at 27 degrees C in a kinetically fast process, while the reverse (micelle----interdigitated bilayer) transition is a kinetically slower process (see also Wu, W. and Huang, C. (1983) Biochemistry 22, 5068-5073).     

Elevation of the heat resistance of Salmonella typhimurium by sublethal heat shock

The survival of Salmonella typhimurium after a standard heat challenge at 55 degrees C for 25 min increased by several orders of magnitude when cells grown at 37 degrees C were pre-incubated at 42 degrees, 45 degrees or 48 degrees C before heating at the higher temperature. Heat resistance increased rapidly after the temperature shift, reaching near maximum levels within 30 min. Elevated heat resistance persisted for at least 10 h. Pre-incubation of cells at 48 degrees C for 30 min increased their resistance to subsequent heating at 50 degrees, 52 degrees, 55 degrees, 57 degrees or 59 degrees C. Survival curves of resistant cells were curvilinear. Estimated times for a '7D' inactivation increased by 2.6- to 20-fold compared with cells not pre-incubated before heat challenge.     

疏绵状嗜热丝孢菌热稳定几丁质酶的纯化及其性质研究

采用硫酸铵沉淀、DEAE SepharoseFastFlow阴离子层析、Phenyl Sepharose疏水层析等步骤获得了凝胶电泳均一的疏绵状嗜热丝孢菌 (Thermomyceslanuginosus)几丁质酶。经SDS PAGE和凝胶过滤层析测得纯酶蛋白的分子量在 4 8～ 4 9 .8kD之间。该酶反应的最适温度和最适pH分别为 5 5℃和 4 5 ,在pH4 5条件下 ,该酶在 5 0℃以下稳定 ;6 5℃的半衰期为 2 5min ;70℃保温 2 0min后 ,仍保留 2 4 %的酶活性。其N 端氨基酸序列为AQGYLSVQYFVNWAI。金属离子对几丁质酶的活性影响较大 ,Ca2 、Na 、K 、Ba2 对酶有激活作用 ;Ag 、Fe2 、Cu2 、Hg2 对酶有显著的抑制作用 ;以胶体几丁质为底物的Km 和Vmax值分别为 9 .5 6mg mL和 2 2 . 12 μmol min。抗菌活性显示 ,该酶对供试病原菌有不同程度的抑制作用。     

Heat activation of Streptomyces viridochromogenes spores.

The lag period preceding germination of Streptomyces viridochromogenes spores during incubation in a defined germination medium was completely eliminated by a gentle heat shock. The rate of germination was not affected. The optimum pH for activation extended from 6.0 to 9.6. The time of heating required for maximum activation was 1 min at 60 C, 2 to 5 min at 55 C, 20 min at 50 C, and 40 to 50 min at 45 C. Activated spores had the same temperature and pH optima and nutritional requirements for germination as unactivated spores. Activated spores deactivated during incubation for 8 h at 25 C and were activated again by a second heat shock. Spores that had been aged for 4 weeks or longer did not germinate in the defined germination medium unless they were first heat activated.     

Generic vapor heat treatments to control Maconellicoccus hirsutus (Homoptera: Pseudococcidae)

Vapor heat treatments were developed against life stages of the mealybug Maconellicoccus hirsutus (Green) (Homoptera: Pseudococcidae). Treatments tested were 47 degrees C for 5-50 min in 5-min increments and 49 degrees C for 3, 5, 8, 10, and 12 min. All tests were conducted with mixed age M. hirsutus on Chinese pea, Pisum sativum L. Treatment at 47 degrees C required 45 min to kill all M. hirsutus, whereas treatment at 49 degrees C required 10 min. The adult female and nymphal stages were the most heat tolerant at 47 degrees C, but the egg stage was the most heat tolerant at 49 degrees C. Use of the vapor heat treatments on other commodities will require achieving or exceeding the proper temperature and duration at all locations on the host where M. hirsutus may reside.     

Thermal inactivation of Enterococcus faecium: effect of growth temperature and physiological state of microbial cells

AIMS: To provide data on the effects on culture temperature and physiological state of cells on heat resistance of Enterococcus faecium, which may be useful in establishing pasteurization procedures. METHODS AND RESULTS: The heat resistance of this Ent. faecium (ATCC 49624 strain) grown at different temperatures was monitored at various stages of growth. In all cases, the bacterial cells in the logarithmic phase of growth were more heat sensitive. For cells which had entered in the stationary phase, D70 values of 0.53 min at 5 degrees C, 0.74 min at 10 degrees C, 0.83 min at 20 degrees C, 0.79 min at 30 degrees C, 0.63 min at 37 degrees C, 0.48 min at 40 degrees C and 0.41 min at 45 degrees C were found. By extending the incubation times cells were more heat resistant as stationary phase progressed, although a different pattern was observed for cells grown at different temperatures. At the lower temperatures heat resistance increased progressively, reaching D70 values of 1.73 min for cells incubated at 5 degrees C for 50 days and 1.04 min for those grown at 10 degrees C for 16 days. At other temperatures assayed heat resistance became stable for late stationary phase cells, reaching D70 values of 1.05, 1.08 and 1.01 min for cultures incubated at 20, 30 and 37 degrees C. Heat resistance of cells obtained at higher temperatures, 40 and 45 degrees C, was significantly lower, with D70 values of 0.76 and 0.67 min, respectively. Neither the growth temperature nor the growth phase modified the z-values significantly. CONCLUSIONS: D70 values obtained for Ent. faecium (ATCC 49624) varies from 0.33 to 1.73 min as a function of culture temperature and physiological state of cells. However, z values calculated were not significantly influenced by these factors. A mean value of 4.50 +/- 0.39 degrees C was found. SIGNIFICANCE AND IMPACT OF THE STUDY: Overall results strongly suggest that, to establish heat processing conditions of pasteurized foods ensuring elimination of Ent. faecium, it is advisable to take into account the complex interaction of growth temperature and growth phase of cells acting on bacterial thermal resistance.     

Dependence of the rate of aspartate ammonia-lyase reaction catalyzed by free and immobilized cells of E. coli on temperature and preliminary thermal treatment]

The effects of temperature (45--55 degrees) and duration of thermal treatment on the L-aspartase activity of free and immobilized on polyacrylamide gel cells of E. coli, strain 85 were studied. It was found that preliminary thermal treatment of the cells at 50 degrees for 40--60 min is optimal for a high aspartase activity. Within the temperature interval of 20--55 degrees the temperature dependence of effective rate constants of L-aspartate synthesis obeys the Arrhenius equation, whereas the effective energy of activation is decreased from 12,6 to 3,6 kcal/mole, when the "activation" of the cells shows an increase.     

Basic Two-Dye Stains for Epoxy-Embedded 0.3-1 μ Sections

Dyes used in the 3 methods recommended are: I, thionin and acridine orange (T-AO); II, Janus green and Darrow red (JG-DR); III, methyl green and methyl violet (MG-MV). The first 2 methods were two-solution stains, applied in sequence; the third, required only one solution since methyl violet is present in commercial methyl green. Staining solution and timing was as follows: Method I. 0.1% thionin in a 45% ethanolic solution of 0.01 N NaOH, 5 min at 70 C; rinsing in water and followed by 1 min in a 1% aqueous solution of acridine orange made up in 0.02 N NaOH, also at 70 C, then washed, and dried on slides. Method II. 0.5% Janus green in aqueous 0.05 N NaOH, 5 min at 70 C; rinsing in water then into 0.5% Darrow red in 0.05 N NaOH (aq.), 2 min at 70 C., washing, and drying on slides. Method III. 1% methyl green (commercial, unpurified) in 1% aqueous borax for 15-20 min at 20-25 C, washing and attaching to slides. All staining was performed by floating the sections on the staining solutions, all drying at 70 C, and mounting in a resinous medium. T-AO gave blue to violet cytoplasmic structures, darker nuclei which contrasted strongly with yellow connective tissue and the secretion of goblet cells. JG-DR resembled a hematoxylineosin stain, but by shortening the staining time in DR to 0.5-1 min, collagenous and elastic tissue retained more of the green dye. MG-MV gave dark green nuclei in light green cytoplasm, with collagenous and elastic tissues in blue to violet. As with most methods for staining ultrathin sections, thicknesses of less than 1 μ required longer staining times.     

Reversible changes in dissolution of the zona pellucida of immature bovine oocytes

The influence of holding immature bovine oocytes in in vitro bovine oviducts on the dissolution of zona pellucida in 0.1% pronase, the role of cumulus cells in this process and the possibility of reversing the process were examined. For the study, 1,045 oocytes were obtained from 2 to 6 mm ovarian follicles. Cumulus-free oocytes were placed in isolated bovine oviducts at 37 degrees C. The average dissolution time of the zona pellucida increased in proportion to the holding time of oocytes in oviducts: 9.9, 13.8, 48.3, 239.3 and 788.3 min after 5, 20, 40, 80 and 120 min in the oviduct, respectively. For the control group, only 4.6 min were required for dissolution of the zona. When cumulus-free and cumulus enclosed oocytes were held for 120 min, no differences were seen in the average lytic time of the zona pellucida of cumulus enclosed oocytes compared with the control group. When cumulus-free oocytes were held in vitro for 120 min and then immersed in follicular fluid from 30 min to 18 h, there was a significant reversal in the sensitivity of the zona pellucida to proteolysis.     

Quantification of free mycophenolic acid and its glucuronide metabolite in human plasma by liquid-chromatography using mass spectrometric and ultraviolet absorbance detection

The immunosuppressant drug mycophenolic acid (MPA) and its major metabolite, mycophenolic acid glucuronide (MPAG), are highly bound to albumin. An HPLC-tandem-MS (HPLC/MS/MS) and an HPLC-UV assay were developed to measure free (unbound) concentrations of MPA and MPAG, respectively. Ultrafiltrate was prepared from plasma (500 microl) by ultrafiltration at 3000 x g for 20 min (20 degrees C). Both MPA and MPAG were isolated from ultrafiltrate (100 microl) by acidification and C18 solid-phase extraction. Free MPA was measured by electrospray tandem mass spectrometry using selected reactant monitoring (MPA: m/z 338.2--> 206.9) in positive ionisation mode. Chromatography was performed on a PFPP column (50 mm x 2 mm, 5 microm). Total analysis time was 7 min. The assay was linear over the range 1-200 microg/l with a limit of quantification of 1 microg/l. The inter-day accuracy and imprecision of quality controls (7.5, 40, 150 microg/l) were 94-99% and < 7%, respectively. Free MPAG was chromatographed on a C18 Nova-Pak column (150 mm x 3.9 mm, 5 microm) using a binary gradient over 20 min. The eluent was monitored at 254 nm. The assay was linear over the range 1-50 mg/l with the limit of quantification at 2.5 mg/l. The inter-day accuracy and imprecision of quality controls (5, 20, 45 mg/l) was 101-107% and < 8% (n = 4), respectively. For both methods no interfering substances were found in ultrafiltrate from patients not receiving MPA. The methods described have a suitable dynamic linear range to facilitate the investigation of free MPA and MPAG pharmacokinetics in transplant patients. Further, this is the first reported HPLC-UV method to determine free MPAG concentrations.