Clathrin heavy chain, light chain interactions

Purified pig brain clathrin can be reversibly dissociated and separated into heavy chain trimers and light chains in the presence of non-denaturing concentrations of the chaotrope thiocyanate. The isolated heavy chain trimers reassemble into regular polygonal cage structures in the absence of light chains. The light chain fraction can be further resolved into its two components L alpha and L beta which give different one-dimensional peptide maps. Radiolabelled light chains bind with high affinity (KD < 10(-10) M) to heavy chain trimers, to heavy chain cages and to a 110,000 mol. wt. tryptic fragment of the heavy chain. Both light chains compete with each other and with light chains from other sources for the same binding sites on heavy chains and c.d. spectroscopy shows that the two pig brain light chains possess very similar structures. We conclude that light chains from different sources, despite some heterogeneity, have a highly conserved, high affinity binding site on the heavy chain but are not essential for the formation of regular cage structures.     

线型链支化链网状链生物大分子的分维测量

本文应用光散射技术研究了几种生物大分子在水溶液中的分形性质。当温度高于胶凝临界温度时,直链淀粉（线型链）、明胶（线圈状链）的分维ｄｆ为５／３,支链淀粉（支化链）的分维为２．２￣２．５。在直链淀粉及明胶水溶液胶凝点（网状链）ｄｆ＝２．０。文章还讨论了ｄｆ与样品温度、浓度的关系。     

Ricinus communis agglutinin B chain contains a fucosylated oligosaccharide side chain not present on ricin B chain

Ricinus communis agglutinin (RCA) B chain, in contrast to ricin B chain, contains fucose. Since both RCA and ricin B chain lose two oligosaccharide side chains when treated with β-endo N-acetylglucosaminidase H, it is proposed that fucose is present on a third oligosaccharide. This third oligosaccharide is not present on the ricin B chain and accounts for the larger relative molecular mass of the RCA B chain.Ricinus communis agglutininRicinB chainFucose     

Gene transfer of immunoglobulin light chain restores heavy chain secretion

Several lines of evidence suggest that immunoglobulin (Ig) light (L) chain plays a role in the secretion of heavy (H) chain. For example, myeloma variant lines, which synthesize the Ig H chain but not the L chain, fail to secrete H chain protein. Here we have tested directly the role of chain assembly in the control of Ig secretion by the transfer of functional L chain genes into two such L chain-defective myeloma mutants. A lambda 2 or kappa L chain gene was introduced into variant lines of the mouse myelomas MOPC 315 (IgA, lambda 2) or PC7 (IgM, kappa), respectively. Although the two mutant lines are unable to secrete the H chain they produce, rescue of secretion of complete Ig protein molecules (IgA or IgM) was observed after transfection. These results imply that the secretory apparatus of these cells is intact and that the failure to secrete free H chain reflects a structural feature intrinsic to that protein. The implications of these results with respect to control of secretion of multi-subunit proteins are discussed.     

The agro-production chain environmental management in the agricultural production-consumption chain

After promoting environmental certification of companies in a chain perspective (Udo de Haes & De Snoo, 1996) now the agro-production chain is worked out as a case study. The role of the different links in the chain, such as agricultural producers, processing industry, wholesale companies and retailers is discussed. Also the role of consumers and authorities is described. For every company in the chain the advantages of a company based approach will be a better image and a guaranteed-sale and/or supply. In comparison with a product based approach (ecolabelling) the steering forces in the agro-production chain will be the retailers and not the consumers. Because consumers only get information at company level the approach is less dependent on consumers behaviour in the shop.     

Conversion from a virtual-bond chain to a complete polypeptide backbone chain

A method for generating a complete polypeptide backbone structure from a set of C^α coordinates is presented. Initial trial values of ? and ψ for a selected residue are chosen (essentially from an identification of the conformational region of the virtual-bond backbone, e.g., and α-helical region), and values of ? and ψ for the remaining residues (both towards the N- and C-terminus) are then computed, subject to the constraint that the chain have the same virtual-bond angles and virtual-bond dihedral angles as the given set of C^α coordinates. The conversion from C^α coordinates to full backbone dihedral angles (?,ψ) involves the solution of a set of algebraic equations relating the virtual-bond angles and virtual-bond dihedral angles to standard peptide geometry and backbone dihedral angles. The procedure has been tested successfully on C^α coordinates taken from standard-geometry full-atom structures of bovine pancreatic trypsin inhibitor (BPTI). Some difficulty was encountered with error-sensitive residues, but on the whole the backbone generation was successful. Application of the method to C^α coordinates for BPTI derived from simplified model calculations (involving nonstandard geometry) showed that such coordinates may be inconsistent with the requirement that ?_Pro be near ?75°. In such a case, i.e., for residues for which the algebraic method failed, a leastsquares minimizer was then used in conjunction with the algebraic method; the mean-square deviation of the calculated C^α coordinates from the given ones was minimized by varying the backbone dihedral angles. Thus, these inconsistencies were circumvented and a full backbone structure whose C^α coordinates had an rms deviation of 0.26 Å from the given set of C^α coordinates was obtained.     

Applicability of broken-rodlike chain model to conformational analysis of polypeptide chain

In order to check the applicability of the broken-rodlike (BR) chain model, consisting of several rods alternatively joined by flexible random coils, to the conformational analysis of a polypeptide chain in the helix-to-coil transition regions, two relations predicted by the Zimm and Bragg theory and the method with the BR chain model are compared. It is shown that, despite a clear difference between the models employed in the two methods, they give substantially identical results in both probability P(j) that a helical residue is in a helical sequence j units long and averaged helical fraction dependence of the mean-squared radius of gyration. Thus the use of the method with the BR chain model in the conformational analysis of a polypeptide chain could be rationalized, at least, with the same degree of approximation as is assumed in the Zimm and Bragg theory. Using the scattering function for the BR chain model, averaged helical-sequence lengths are evaluated for partially ionized poly(L-glutamic acid) (PGA) in added-salt aqueous solution and nonionized PGA in N-methylacetamide, both in a helical state. As a result, it is shown that the length in the latter molecule is approximately tenfold longer than that in the former one.     

Engineering and characterization of a single chain surrogate light chain variable domain

The surrogate light chain (SLC) is a key regulator of B cell development in the bone marrow, resulting in mature B cells that produce antibodies that are capable of interacting with antigens. The SLC comprises two noncovalently interacting proteins: VpreB and 14.1. We engineered a construct to represent the complete immunoglobulin-like domain of the SLC variable domain in a single protein chain that could be bacterially expressed. In this construct, the incomplete immunoglobulin domain of VpreB (residues 1-102) was linked to the J-segment of 14.1 (residues 40-53), which provided one beta-strand to complete the V-like domain (VpreBJ). Because VpreBJ has the interface to VH chains, but lacks the unique region of 14.1, which is important for SLC signaling, we predict that a properly folded VpreBJ would have the potential to act as a dominant negative mutant of the surrogate light chain. X-ray crystallography of VpreBJ at 2.0 A resolution showed that the engineering was successful. With its two beta-pleated sheets, packed face-to-face, the single chain VpreBJ resembles a mature light chain immunoglobulin V-domain (VL). The surface that would normally interact with the VH chain interacts with a crystallographically related VpreBJ molecule. The presence of dimeric species in solution was verified by analytical ultracentrifugation. VpreBJ is easily overexpressed in bacteria, while retaining the native conformation of an immunoglobulin domain, and thus may serve as an important reagent for future studies in B-cell development.     

Translocation of botulinum neurotoxin light chain protease through the heavy chain channel

Clostridial botulinum neurotoxins (BoNTs) abort the process of neurotransmitter release at presynaptic motor nerve terminals, causing muscle paralysis. An enigmatic step in the intoxication process is the mechanism by which the neurotoxin heavy chain (HC) forms the conduit for the translocation of the light chain (LC) protease across the endosomal membrane into the cytosol, its site of action. Here we investigate the mechanism of LC translocation by using the combined detection of channel currents and substrate proteolysis, the two hallmark activities of BoNT. Our data are consistent with the translocation of the LC through the HC channel and show that the LC protease activity is retrieved in the trans compartment after translocation. We propose that the BoNT HC-LC complex embedded in the membrane is a transmembrane chaperone, a dynamic structural device that prevents aggregation and achieves translocation of the LC. In this regard, the complex is similar to the protein conducting/translocating channels of the endoplasmic reticulum, mitochondria and chloroplasts.     

Light chain C-terminal region reinforces the stability of clathrin heavy chain trimers

The self-assembly of clathrin into lattices relies on the ability of heavy chain legs to form a three-legged pinwheel structure. We investigated the role of light chains in clathrin trimerization by challenging recombinant hub (plus and minus light chain) with an anionic detergent. The binding of light chain increases the amount of detergent needed to induce detrimerization, suggesting light chains reinforced hub trimers. We also show that light chain C-terminal residues are important for enhancing the in vitro assembly of hub at low pH. We assessed how much the C-terminus of light chain contributed to the stability of the trimerization domain by adding full-length and truncated light chains to trimer-defective hub mutants, C1573S and C1573A. Adding full-length LCb to C1573S caused some retrimerization, but little activity was restored, suggesting the majority of oligomeric C1573S was nonnative. A larger percentage of monomeric C1573A could be retrimerized into an assembly-competent form by adding intact LCb. We also discovered that C-terminally deleted light chains produced a heterogeneous population of hubs that were smaller than native hubs, but were assembly active. We propose a model showing how light chains reinforce the puckered clathrin triskelion. Finally, the ability of light chains to retrimerize C1573A hub suggests that the structural role of light chain may be conserved in yeast and mammals.     

Polymerase chain reaction engineering

A mathematical model for polymerase chain reaction (PCR) is developed, taking into account the three steps in this process: melting of DNA; primer annealing; and DNA synthesis (polymerization). Activity and deactivation of the polymerase enzyme as a function of temperature is incorporated in the kinetic model to get a better understanding of the amplification of DNA. Computer simulation of the model is carried out to determine the effects of various parameters, such as the cycle number, initial DNA concentration (copynumber), initial enzyme concentration, extension time, temperature ramp, and enzyme deactivation on the DNA generation. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55: 359-366, 1997.     

A modular latching chain

Many cognitive tasks involve transitions between distinct mental processes, which may range from discrete states to complex strategies. The ability of cortical networks to combine discrete jumps with continuous glides along ever changing trajectories, dubbed latching dynamics, may be essential for the emergence of the unique cognitive capacities of modern humans. Novel trajectories have to be followed in the multidimensional space of cortical activity for novel behaviours to be produced; yet, not everything changes: several lines of evidence point at recurring patterns in the sequence of activation of cortical areas in a variety of behaviours. To extend a mathematical model of latching dynamics beyond the simple unstructured auto-associative Potts network previously analysed, we introduce delayed structured connectivity and hetero-associative connection weights, and we explore their effects on the dynamics. A modular model in the small-world regime is considered, with modules arranged on a ring. The synaptic weights include a standard auto-associative component, stabilizing distinct patterns of activity, and a hetero-associative component, favoring transitions from one pattern, expressed in one module, to the next, in the next module. We then study, through simulations, how structural parameters, like those regulating rewiring probability, noise and feedback connections, determine sequential association dynamics.     

The polymerase chain reaction

The polymerase chain reaction (PCR) is a powerful new method for 'in vitro cloning'. It can selectively amplify a single molecule of template DNA several millionfold in a few hours and has made possible new approaches to problems in molecular genetics, evolutionary biology, and development.