Salt effects on bacteriophage T7-I

The thermal denaturation as a measure of the structural stability of the nucleoprotein in bacteriophage T7 has been studied in dependence of the ionic environment. Optical density and circular dichroism melting curves measured at wavelengths characterizing either the DNA or protein conformational changes were compared to identify different steps of the denaturation and to follow the effect of the ions. Monovalent salts strengthen the helical structure of intraphage DNA logarithmically in the way as they do in the case of isolated double-stranded DNA. Mg2+ and Ca2+ at very low concentrations stabilize the DNA helicity. Higher divalent ion concentrations decrease the stability of the double helix because of the repulsive ionic interactions. The high structural sensitivity of DNA in the presence of Mg2+ and Ca2+ in this "in situ" environment can be related to the biological role of these ions.     

Divalent metal ion binding to a conserved wobble pair defining the upstream site of cleavage of group I self-splicing introns.

The upstream site of cleavage of all group I self-splicing introns is identified by an absolutely conserved U.G base pair. Although a wobble C.A pair can substitute the U.G pair, all other combinations of nucleotides at this position abolish splicing, suggesting that it is an unusual RNA structure, rather than sequence, that is recognized by the catalytic intron core. RNA enzymes are metalloenzymes, and divalent metal ion binding may be an important requirement for splice site recognition and catalysis. The paramagnetic broadening of NMR resonances upon manganese binding at specific sites was used to probe the interaction between divalent metal ions and an oligonucleotide model of a group I intron ribozyme substrate. Unlike previous studies in which only imino proton resonances were monitored, we have used isotopically labelled RNA and a set of complete spectral assignments to identify the location of the divalent metal binding site with much greater detail than previously possible. Two independent metal binding sites were identified for this oligonucleotide. A first metal binding site is located in the major groove of the three consecutive G.C base pairs at the end of double helical stem. A second site is found in the major groove of the RNA double helix in the vicinity of the U.G base pair. These results suggest that metal ion coordination (or a metal bridge) and tertiary interactions identified biochemically, may be used by group I intron ribozymes for substrate recognition.     

Mechanistic characterization of the HDV genomic ribozyme: classifying the catalytic and structural metal ion sites within a multichannel reaction mechanism

Prior studies of the metal ion dependence of the self-cleavage reaction of the HDV genomic ribozyme led to a mechanistic framework in which the ribozyme can self-cleave by multiple Mg2+ ion-independent and -dependent channels [Nakano et al. (2001) Biochemistry 40, 12022]. In particular, channel 2 involves cleavage in the presence of a structural Mg2+ ion without participation of a catalytic divalent metal ion, while channel 3 involves both structural and catalytic Mg2+ ions. In the present study, experiments were performed to probe the nature of the various divalent ion sites and any specificity for Mg2+. A series of alkaline earth metal ions was tested for the ability to catalyze self-cleavage of the ribozyme under conditions that favor either channel 2 or channel 3. Under conditions that populate primarily channel 3, nearly identical K(d)s were obtained for Mg2+, Ca2+, Ba2+, and Sr2+, with a slight discrimination against Ca2+. In contrast, under conditions that populate primarily channel 2, tighter binding was observed as ion size decreases. Moreover, [Co(NH3)6]3+ was found to be a strong competitive inhibitor of Mg2+ for channel 3 but not for channel 2. The thermal unfolding of the cleaved ribozyme was also examined, and two transitions were found. Urea-dependent studies gave m-values that allowed the lower temperature transition to be assigned to tertiary structure unfolding. The effects of high concentrations of Na+ on the melting temperature for RNA unfolding and the reaction rate revealed ion binding to the folded RNA, with significant competition of Na+ (Hill coefficient of 1.5-1.7) for a structural Mg2+ ion and an unusually high intrinsic affinity of the structural ion for the RNA. Taken together, these data support the existence of two different classes of metal ion sites on the ribozyme: a structural site that is inner sphere with a major electrostatic component and a preference for Mg2+, and a weak catalytic site that is outer sphere with little preference for a particular divalent ion.     

Lead cleavage sites in the core structure of group I intron-RNA.

Self-splicing of group I introns requires divalent metal ions to promote catalysis as well as for the correct folding of the RNA. Lead cleavage has been used to probe the intron RNA for divalent metal ion binding sites. In the conserved core of the intron, only two sites of Pb2+ cleavage have been detected, which are located close to the substrate binding sites in the junction J8/7 and at the bulged nucleotide in the P7 stem. Both lead cleavages can be inhibited by high concentrations of Mg2+ and Mn2+ ions, suggesting that they displace Pb2+ ions from the binding sites. The RNA is protected from lead cleavage by 2'-deoxyGTP, a competitive inhibitor of splicing. The two major lead induced cleavages are both located in the conserved core of the intron and at phosphates, which had independently been demonstrated to interact with magnesium ions and to be essential for splicing. Thus, we suggest that the conditions required for lead cleavage occur mainly at those sites, where divalent ions bind that are functionally involved in catalysis. We propose lead cleavage analysis of functional RNA to be a useful tool for mapping functional magnesium ion binding sites.     

Effect of surface concentration on secondary and tertiary conformational changes of lysozyme adsorbed on silica nanoparticles

Kinetics of tertiary conformation of lysozyme adsorbed on 90 nm silica nanoparticles was inferred using tryptophan fluorescence for different surface concentrations (0.24 to 0.92 mg/m(2)), pH (4, 7 and 9), ionic strength (10 and 100 mM), 2,2,2-trifluoroethanol (TFE) (5, 15 and 30%) and Dithiothreitol (DTT) (0.5 mg/ml) concentrations. A rapid initial unfolding, followed by a much slower refolding and subsequent unfolding, were observed with the extent of unfolding being higher at lower surface concentration, higher ionic strengths, higher TFE and DTT concentrations and at pH 9. The rate of unfolding was found to be higher at lower surface concentrations, pH 4, higher ionic strengths, higher TFE and DTT concentrations. In contrast, earlier results showed that beta lactoglobulin unfolded slower and exhibited only an initial rapid and a subsequent slow unfolding phase. Circular Dichroism spectra showed that alpha helix content was lower for adsorbed lysozyme compared to bulk with a corresponding increase in beta sheet and random coil. This decrease in alpha helix was found to be more pronounced at lower surface concentrations. DTT decreased alpha helix with a corresponding increase in random coil while TFE was found to have negligible effect on secondary structure.     

Characterization of the stabilizing effect of point mutations of pyruvate oxidase from Lactobacillus plantarum: protection of the native state by modulating coenzyme binding and subunit interaction.

Point mutations in the gene of pyruvate oxidase from Lactobacillus plantarum, with proline residue 178 changed to serine, serine 188 to asparagine, and alanine 458 to valine, as well as a combination of the three single point mutations, lead to a significant functional stabilization of the protein. The enzyme is a tetrameric flavoprotein with tightly bound cofactors, FAD, TPP, and divalent metal ions. Thus, stabilization may be achieved either at the level of tertiary or quaternary interactions, or by enhanced cofactor binding. In order to discriminate between these alternatives, unfolding, dissociation, and cofactor binding of the mutant proteins were analyzed. The point mutations do not affect the secondary and tertiary structure, as determined by circular dichroism and protein fluorescence. Similarly, the amino acid substitutions neither modulate the enzymatic properties of the mutant proteins nor do they stabilize the structural stability of the apoenzymes. This holds true for both the local and the global structure with unfolding transitions around 2.5 M and 5 M urea, respectively. On the other hand, deactivation of the holoenzyme (by urea or temperature) is significantly decreased. The most important stabilizing effect is caused by the Ala-Val exchange in the C-terminal domain of the molecule. Its contribution is close to the value observed for the triple mutant, which exhibits maximum stability, with a shift in the thermal transition of ca. 10 degrees C. The effects of the point mutations on FAD binding and subunit association are interconnected. Because FAD binding is linked to oligomerization, the stability of the mutant apoenzyme-FAD complexes is increased. Accordingly, mutants with maximum apparent FAD binding exhibit maximum stability. Analysis of the quaternary structure of the mutant enzymes in the absence and in the presence of coenzymes gives clear evidence that both improved ligand binding and subunit interactions contribute to the observed thermal stabilization.     

Influence of specific mutations on the thermal stability of the td group I intron in vitro and on its splicing efficiency in vivo: a comparative study.

Group I introns constitute excellent systems for analyzing the relationship between RNA tertiary folding and catalysis. Within a hierarchical framework interpretation of RNA folding, secondary structure motifs subtend RNA three-dimensional (3D) architecture. Thus, mutations in two-dimensional motifs are expected to have effects different from those disrupting 3D contacts. Using UV spectroscopy, we have studied the influence of nucleotide substitutions, in both secondary and tertiary structure elements, on the thermal stability of the tertiary folding of the bacteriophage T4 td group I intron. Further, we present a quantitative analysis of the relationship between the splicing efficiency in vivo and the stability of the intron structure as monitored by UV melting curves. We conclude that the stability of the tertiary structure of a group I intron as measured by UV melting is generally a good indication of its ability to splice in vivo.     

RNA helix stability in mixed Na+/Mg2+ solution

A recently developed tightly bound ion model can account for the correlation and fluctuation (i.e., different binding modes) of bound ions. However, the model cannot treat mixed ion solutions, which are physiologically relevant and biologically significant, and the model was based on B-DNA helices and thus cannot directly treat RNA helices. In the present study, we investigate the effects of ion correlation and fluctuation on the thermodynamic stability of finite length RNA helices immersed in a mixed solution of monovalent and divalent ions. Experimental comparisons demonstrate that the model gives improved predictions over the Poisson-Boltzmann theory, which has been found to underestimate the roles of multivalent ions such as Mg2+ in stabilizing DNA and RNA helices. The tightly bound ion model makes quantitative predictions on how the Na+-Mg2+ competition determines helix stability and its helix length-dependence. In addition, the model gives empirical formulas for the thermodynamic parameters as functions of Na+/Mg2+ concentrations and helix length. Such formulas can be quite useful for practical applications.     

Ciprofloxacin affects conformational equilibria of DNA gyrase A in the presence of magnesium ions

The conformational equilibria of the A subunit of DNA gyrase (GyrA), of its 59 kDa N-terminal fragment (GyrA59) and of the quinolone-resistant Ser-Trp83 mutant (GyrATrp83), were investigated in the presence of mono- and divalent metal ions and ciprofloxacin, a clinically useful antibacterial quinolone. The stability of the proteins was estimated from temperature denaturation, monitoring unfolding with circular dichroism spectroscopy. Two transitions were observed in GyrA and GyrATrp83, which likely reflect unfolding of the N and C-terminal protein domains. Accordingly, one thermal transition is observed for GyrA59.The melting profile of the GyrA subunit is dramatically affected by monovalent and divalent metal ions, both transitions being shifted to lower temperature upon increasing salt concentration. This effect is much more pronounced with divalent ions (Mg(2+)) and cannot be accounted for by changes in ionic strength only. The presence of ciprofloxacin shifts the melting transitions of the wild-type subunit to higher temperatures when physiological concentrations of Mg(2+) are present. In contrast, both the mutant protein and the 59 kDa fragment do not show evidence for quinolone-driven changes. These data suggest that ciprofloxacin binds to the wild-type subunit in an interaction that involves Ser83 of GyrA and that both C and N-terminal domains may be required for effective drug-protein interactions. The bell-shaped dependence of the binding process upon Mg(2+) concentration, with a maximum centred at 3-4 mM [Mg(2+)], is consistent with a metal-ion mediated GyrA-quinolone-interaction. Affinity chromatography data fully support these findings and additionally confirm the requirement for a free carboxylate to elicit binding of the quinolone to GyrA.We infer that the Mg(2+)-GyrA interaction at physiological metal ion concentration could bear biological relevance, conferring more conformational flexibility to the active enzyme. The results obtained in the presence of ciprofloxacin additionally suggest that the Mg(2+)-mediated quinolone binding to the enzyme might be involved in the mechanism of action of this family of drugs.     

Electrostatic effects on the stability of condensed DNA in the presence of divalent cations.

Cylindrical cell model Poisson-Boltzmann (P-B) calculations are used to evaluate the electrostatic contributions to the relative stability of various DNA conformations (A, B, C, Z, and single-stranded (ss) with charge spacings of 3.38 and 4.2 A) as a function of interhelix distance in a concentrated solution of divalent cations. The divalent ion concentration was set at 100 mM, to compare with our earlier reports of spectroscopic and calorimetric experiments, which demonstrate substantial disruption of B-DNA geometry. Monovalent cations neutralize the DNA phosphates in two ways, corresponding to different experimental situations: 1) There is no significant contribution to the ionic strength from the neutralizing cations, corresponding to DNA condensation from dilute solution and to osmotic stress experiments in which DNA segments are brought into close proximity to each other in the presence of a large excess of buffer. 2) The solution is uniformly concentrated in DNA, so that the neutralizing cations add significantly to those in the buffer at close DNA packing. In case 1), conformations with lower charge density (Z and ssDNA) have markedly lower electrostatic free energies than B-DNA as the DNA molecules approach closely, due largely to ionic entropy. If the divalent cations bind preferentially to single-stranded DNA or a distorted form of B-DNA, as is the case with transition metals, the base pairing and stacking free energies that stabilize the double helix against electrostatic denaturation may be overcome. Strong binding to the bases is favored by the high concentration of divalent cations at the DNA surface arising from the large negative surface potential; the surface concentration increases sharply as the interhelical distance decreases. In case 2), the concentration of neutralizing monovalent cations becomes very large and the electrostatic free energy difference between secondary structures becomes small as the interhelical spacing decreases. Such high ionic concentrations will be expected to modify the stability of DNA by changing water activity as well as by screening electrostatic interactions. This may be the root of the decreased thermal stability of DNA in the presence of high concentrations of magnesium ions.     

Effect of divalent metal ions on soluble and membrane-bound alkaline phosphatase activity in suckling rat intestine.

EDTA treatment of intestinal brush border membranes (BBM) and epithelial cell supernatant completely inhibited alkaline phosphatase (AP) activity in suckling rat intestine. AP activity was fully regained upon dialysis of the preparations against Zn2+ and to a lesser extent against Co2+, Ca2+ and Mn2+ ions. Other metal ions (Cd2+ and Mg2+) tested were essentially ineffective in restoring the enzyme activity. Considerable differences were observed in kinetic characteristics of the membrane-bound and soluble AP activities in response to various metal ions. There were apparent differences in Km, Vmax, energy of activation (Ea) and thermal stability of the soluble and membrane-bound AP activities, after metal ion substitutions. Nearly 35% AP activity was solubilized on sodium dodecyl sulphate treatment of brush borders (membrane protein: detergent ratio 1:3; w/w). Dialysis of detergent solubilized BBM against different metal ions reconstituted AP activity in the particulate fraction: the order of effectiveness was Zn greater than Ca greater than Mn greater than Co. The kinetic properties of the reconstituted AP were essentially similar to the non-integrated enzyme activity in response to various divalent metal ions examined. But there were apparent differences in Km, Vmax, Ea and thermal stability of the reconstituted AP activity compared to native brush border enzyme. The results suggest the unique requirement of Zn ions for stability and catalytic activity of the soluble and membrane-bound AP activity in suckling rat intestine.     

Monovalent cations mediate formation of native tertiary structure of the Tetrahymena thermophila ribozyme

The formation of individual tertiary contacts of the Tetrahymena L-21 Sca I ribozyme has been monitored by hydroxyl radical footprinting and its global conformation by analytical ultracentrifugation as a function of monovalent ion concentration in the absence of divalent ions. Advanced methods of data analysis, which allow the hydroxyl radical reactivity of every nucleotide to be quantified, permit monitoring of each and every structural element of the RNA. Monovalent ion-mediated global compaction of the ribozyme is accompanied by the formation of native tertiary contacts; most native tertiary contacts are evident except several that are located near where divalent ions are observed in crystallographic structures. Non-native tertiary contacts are also observed at low but not high concentrations of monovalent ions. In light of recent studies that have shown that the presence of monovalent ions greatly accelerates the Mg2+-dependent folding of the Tetrahymena ribozyme, the present studies suggest that Na+ concentration changes not only the starting position of the RNA on its folding funnel but also pushes it deep into the well by forming native tertiary contacts and, thus, favoring fast and correct folding pathways.     

A chemical phylogeny of group I introns based upon interference mapping of a bacterial ribozyme

Despite its small size, the 205 nt group I intron from Azoarcus tRNA(Ile) is an exceptionally stable self-splicing RNA. This IC3 class intron retains the conserved secondary structural elements common to group I ribozymes, but lacks several peripheral helices. These features make it an ideal system to establish the conserved chemical basis of group I intron activity. We collected nucleotide analog interference mapping (NAIM) data of the Azoarcus intron using 14 analogs that modified the phosphate backbone, the ribose sugar, or the purine base functional groups. In conjunction with a complete interference set collected on the Tetrahymena group I intron (IC1 class), these data define a "chemical phylogeny" of functional groups that are important for the activity of both introns and that may be common chemical features of group I intron catalysts. The data identify the functional moieties most likely to play a conserved role as ligands for catalytic metal ions, the substrate helix, and the guanosine cofactor. These include backbone functional groups whose nucleotide identity is not conserved, and hence are difficult to identify by standard phylogenetic sequence comparisons. The data suggest that both introns utilize an equivalent set of long range tertiary interactions for 5'-splice site selection between the P1 substrate helix and its receptor in the J4/5 asymmetric bulge, as well as an equivalent set of 2'-OH groups for P1 helix docking into most of the single stranded segment J8/7. However, the Azoarcus intron appears to make an alternative set of interactions at the base of the P1 helix and at the 5'-end of the J8/7. Extensive differences were observed within the intron peripheral domains, particularly in P2 and P8 where the Azoarcus data strongly support the proposed formation of a tetraloop-tetraloop receptor interaction. This chemical phylogeny for group I intron catalysis helps to refine structural models of the RNA active site and identifies functional groups that should be carefully investigated for their role in transition state stabilization.     

The hammerhead cleavage reaction in monovalent cations

Recently, Murray et al. (Chem Biol, 1998, 5:587-595) found that the hammerhead ribozyme does not require divalent metal ions for activity if incubated in high (> or =1 M) concentrations of monovalent ions. We further characterized the hammerhead cleavage reaction in the absence of divalent metal. The hammerhead is active in a wide range of monovalent ions, and the rate enhancement in 4 M Li+ is only 20-fold less than that in 10 mM Mg2+. Among the Group I monovalent metals, rate correlates in a log-linear manner with ionic radius. The pH dependence of the reaction is similar in 10 mM Mg2+, 4 M Li+, and 4 M Na+. The exchange-inert metal complex Co(NH3)3+ also supports substantial hammerhead activity. These results suggest that a metal ion does not act as a base in the reaction, and that the effects of different metal ions on hammerhead cleavage rates primarily reflect structural contributions to catalysis.     

Functional identification of catalytic metal ion binding sites within RNA

The viability of living systems depends inextricably on enzymes that catalyze phosphoryl transfer reactions. For many enzymes in this class, including several ribozymes, divalent metal ions serve as obligate cofactors. Understanding how metal ions mediate catalysis requires elucidation of metal ion interactions with both the enzyme and the substrate(s). In the Tetrahymena group I intron, previous work using atomic mutagenesis and quantitative analysis of metal ion rescue behavior identified three metal ions (MA, MB, and MC) that make five interactions with the ribozyme substrates in the reaction's transition state. Here, we combine substrate atomic mutagenesis with site-specific phosphorothioate substitutions in the ribozyme backbone to develop a powerful, general strategy for defining the ligands of catalytic metal ions within RNA. In applying this strategy to the Tetrahymena group I intron, we have identified the pro-SP phosphoryl oxygen at nucleotide C262 as a ribozyme ligand for MC. Our findings establish a direct connection between the ribozyme core and the functionally defined model of the chemical transition state, thereby extending the known set of transition-state interactions and providing information critical for the application of the recent group I intron crystallographic structures to the understanding of catalysis.     

Effects of calcium and manganese ions on the helix–coil transition of DNA

The thermal denaturation method was employed to study the effect of Ca²⁺ and Mn²⁺ ions on the DNA helix–coil transition parameters at Na⁺ concentrations of 10^?3–10^?1M. At low ion concentrations, thermal stability increases, the melting range passes through a maximum, and the denaturation curves become asymmetric. These changes are quantitatively similar for Mn²⁺ and Ca²⁺ ions. With a further increase in the concentration of bivalent ions, the conformational transition temperatures pass through a maximum, and the melting range first tends to saturation and then rapidly decreases to 1–2°C. The Mn²⁺ concentrations, at which the above effects occur, are an order of magnitude lower than the Ca²⁺ concentrations. Comparison of experimental results and calculation in terms of the ligand theory permitted estimation of binding constants characterizing association between Mn²⁺ and Ca²⁺ ions and bases of native and denatured DNA. We show that, unlike the interaction with phosphates, bivalent ion–DNA base binding is weakly dependent on monovalent ion concentration in the solution.     

The Influence of Monovalent Cation Size on the Stability of RNA Tertiary Structures

Many RNA tertiary structures are stable in the presence of monovalent ions alone. To evaluate the degree to which ions at or near the surfaces of such RNAs contribute to stability, the salt-dependent stability of a variety of RNA structures was measured with each of the five group I cations. The stability of hairpin secondary structures and a pseudoknot tertiary structure are insensitive to the ion identity, but the tertiary structures of two other RNAs, an adenine riboswitch and a kissing loop complex, become more stable by 2-3 kcal/mol as ion size decreases. This "default" trend is attributed to the ability of smaller ions to approach the RNA surface more closely. The degree of cation accumulation around the kissing loop complex was also inversely proportional to ion radius, perhaps because of the presence of sterically restricted pockets that can be accessed only by smaller ions. An RNA containing the tetraloop-receptor motif shows a strong (up to ∼ 3 kcal/mol) preference for Na⁺ or K⁺ over other group I ions, consistent with the chelation of K⁺ by this motif in some crystal structures. This RNA reverts to the default dependence on ion size when a base forming part of the chelation site is mutated. Lastly, an RNA aptamer for cobinamide, which was originally selected in the presence of high concentrations of LiCl, binds ligand more strongly in the presence of Li⁺ than other monovalent ions.On the basis of these trends in RNA stability with group I ion size, it is argued that two features of RNA tertiary structures may promote strong interactions with ions at or near the RNA surface: negative charge densities that are higher than that in secondary structures, and the occasional presence of chelation sites, which are electronegative pockets that selectively bind ions of an optimum size.     

Tertiary structure-dependence of misfolding substitutions in loops of the maltose-binding protein.

We previously identified and characterized amino acid substitutions in a loop connecting helix I to strand B, the alphaI/betaB loop, of the N-domain that are critical for in vivo folding of the maltose-binding protein (MalE31). The tertiary context-dependence of this mutation in MalE folding was assessed by probing the tolerance of an equivalent alphabeta loop of the C-domain to the same amino acid substitutions (MalE219). Moving the loop mutation from the N- to the C-domain eliminated the in vivo misfolding step that led to the formation of inclusion bodies. In vitro, both loop variants exhibited an important decrease of stability, but their intrinsic tendency to aggregate was well correlated with their periplasmic fates in Escherichia coli. Furthermore, the noncoincidence of the unfolding and refolding transition curves and increase of light scattering during the refolding of MalE31 indicate that a competing off-pathway reaction could occurs on the folding pathway of this variant. These results strongly support the notion that the formation of super-secondary structures of the N-domain is a rate-limiting step in the folding pathway of MalE.     

Competitive Binding of Mg2+ and Na+ Ions to Nucleic Acids: From Helices to Tertiary Structures

Nucleic acids generally reside in cellular aqueous solutions with mixed divalent/monovalent ions, and the competitive binding of divalent and monovalent ions is critical to the structures of nucleic acids because of their polyanionic nature. In this work, we first proposed a general and effective method for simulating a nucleic acid in mixed divalent/monovalent ion solutions with desired bulk ion concentrations via molecular dynamics (MD) simulations and investigated the competitive binding of Mg²⁺/Na⁺ ions to various nucleic acids by all-atom MD simulations. The extensive MD-based examinations show that single MD simulations conducted using the proposed method can yield desired bulk divalent/monovalent ion concentrations for various nucleic acids, including RNA tertiary structures. Our comprehensive analyses show that the global binding of Mg²⁺/Na⁺ to a nucleic acid is mainly dependent on its structure compactness, as well as Mg²⁺/Na⁺ concentrations, rather than the specific structure of the nucleic acid. Specifically, the relative global binding of Mg²⁺ over Na⁺ is stronger for a nucleic acid with higher effective surface charge density and higher relative Mg²⁺/Na⁺ concentrations. Furthermore, the local binding of Mg²⁺/Na⁺ to a phosphate of a nucleic acid mainly depends on the local phosphate density in addition to Mg²⁺/Na⁺ concentrations.