Immobilization of tyrosinase and alcohol oxidase in conducting copolymers of thiophene functionalized poly(vinyl alcohol) with pyrrole

Immobilization of tyrosinase and alcohol oxidase is achieved in the copolymer of pyrrole with vinyl alcohol with thiophene side groups (PVATh-co-PPy) which is a newly synthesized conducting polymer. PVATh-co-PPy/alcohol oxidase and PVATh-co-PPy/tyrosinase electrodes are constructed by the entrapment of enzyme in conducting copolymer matrix during electrochemical copolymerization. For tyrosinase and alcohol oxidase enzymes, catechol and ethanol are used as the substrates, respectively. Kinetic parameters: maximum reaction rates (V(max)) and Michaelis-Menten constants (K(m)) are obtained. V(max) and K(m) are found as 2.75 micromol/(minelectrode) and 18 mM, respectively, for PVATh-co-PPy/alcohol oxidase electrode and as 0.0091micromol/(minelectrode) and 40 mM, respectively, for PVATh-co-PPy/tyrosinase electrode. Maximum temperature and pH values are investigated and found that both electrodes have a wide working range with respect to both temperature and pH. Operational and storage stabilities show that although they have limited storage stabilities, the enzyme electrodes are useful with respect to operational stabilities.     

Comparison of tyrosinase activity and stability in aqueous and nearly nonaqueous environments

The activity and stability of tyrosinase were compared in aqueous and two nearly nonaqueous environments (a low-water solvent system and reversed micelles). Initial rates of oxidation of methyl- and butyl-catechols in aerosol OT, sodium di-2-ethylhexylsulfosuccinate, (AOT)/isooctane micelles were higher than in aqueous solution, showing superactivity, whereas lower rates were obtained in cetyltri-methylammonium bromide (CTAB)/hexane/chloroform micelles and in chloroform containing celite-supported enzyme. The enzyme was most stable in chloroform, whereas half-lives in aqueous buffer and in both AOT and CTAB micelles were lower. The optimal reaction temperatures were higher in both micelles than in water but lower in chloroform. Thus, tyrosinase was active in ≤3.5% v/v water with apparent K_m, V_max, and activation energies reasonably similar to those in aqueous solution.     

Tyrosinase activity in reversed micelles

The hydroxylase and oxidase activities of mushroom tyrosinase were studied in both sodium di-2-ethylhexylsulfosuccinate (AOT)/isooctane and cetyltrimethylammonium bromide (CTAB)/hexane/chloroform reversed micelles. The enzyme presented its highest activity when the water to surfactant molar ratio (W ₀) was 20 for both systems. When entrapped in the AOT reversed micelles, the enzyme activity decreased with the increase in AOT concentration at a constant W ₀, and the enzyme not only presented a higher reaction rate related to its oxidase activity but also a shorter lag period related to its hydroxylase activity. The relation between water activity and W ₀ revealed that enzyme activity in reversed micelles was more related to the size of the micelles which was determined by W ₀ and less to the water activity. Tyrosinase in CTAB reversed micelles showed potential for the analysis of o-diphenols.     

Disposable tyrosinase-peroxidase bi-enzyme sensor for amperometric detection of phenols

A new disposable amperometric bi-enzyme sensor system for detecting phenols has been developed. The phenol sensor developed uses horseradish peroxidase modified screen-printed carbon electrodes (HRP-SPCEs) coupled with immobilized tyrosinase prepared using poly(carbamoylsulfonate) (PCS) hydrogels or a poly(vinyl alcohol) bearing styrylpyridinium groups (PVA-SbQ) matrix. Optimization of the experimental parameters has been performed with regard to buffer composition, pH, operating potential and storage stability. A co-operative reaction involving tyrosinase and HRP occurs at a potential of -50 mV versus Ag/AgCl without the requirement for addition of extraneous H(2)O(2), thus, resulting in a very simple and efficient system. Comparison of the electrode responses with the 4-aminoantipyrine standard method for phenol sample analysis indicated the feasibility of the disposable sensor system for sensitive "in-field" determination of phenols. The most sensitive system was the tyrosinase immobilized HRP-SPCE using PCS, which displayed detection limits for phenolic compounds in the lower nanomolar range e.g. 2.5 nM phenol, 10 nM catechol and 5 nM p-cresol.     

Analysis of thiols with tyrosinase-modified carbon paste electrodes based on blocking of substrate recycling

The enzyme, tyrosinase, was immobilized inside carbon paste electrodes (CPE) for the analysis of thiol-containing compounds such as the reduced form of glutathione (GSH) and L-cysteine. The measuring principle of this sensor is based on the blocking of the substrate recycling process between the enzyme and the electrode. The current response is monitored at -0.050 V versus Ag/AgCl. At this low potential, interferences from easily oxidizable species such as ascorbic acid and uric acid are minimized. The tyrosinase CPE is characterized both in steady state experiments and by flow injection analysis (FIA). GSH is used as the model thiol-containing compound for the study. The highest response for GSH was obtained around pH 6.5. A detection limit of 100 nM and 1 microM is achieved for GSH in steady state and in flow measurements, respectively. The analytical range for GSH is dependent on the concentration of the tyrosinase substrate (catechol). In steady state experiments, and at a lower substrate concentration (10 microM catechol), a linear range of 1-8 microM is found for GSH as compared with 5-30 microM at a higher substrate concentration of 20 microM catechol. Current response of the tyrosinase CPE is not affected by the oxidized form of GSH and L-cysteine (glutathione disulfide, GSSG, and L-cystine, respectively) and sulfur-containing compound such as methionine. The tyrosinase CPE can also detect coenzyme A, which makes it possible to construct biosensors based on enzymes producing or utilizing coenzyme A.     

Sensitive estimation of total cholesterol in blood using Au nanowires based micro-fluidic platform

Determination of cholesterol level in blood is important in clinical applications. In this work, modified Au nanowires-electrochemical biosensor based on MEMS micro-fluidic platform is proposed for estimating total cholesterol in blood. This sensor consists of "aligned" Au nanowires as working electrode, platinum counter electrode deposited on the silicon platform and Ag/AgCl (3M KCl) reference electrode. The "aligned" Au nanowires are immobilized with cholesterol oxidase and cholesterol esterase using specific covalent chemistry. Further, Au nanowires promotes better electron transfer between the enzymes and electrodes, because of their large surface to volume ratio, small diffusion time, large electrical conductivity and their aligned nature. The modified Au nanowires showed a stable calibration line and a quasi-linear relationship between cholesterol level and current response in the range of 1-6 mM (in steps of 1 mM over the baseline blood serum). The sensitivity of the modified electrode was found to be about 69 nA/mM with good storage and interference stability.     

The catalytic effect of tyrosinase upon oxidation of 2-hydroxyestradiol in presence of catechol

The hydroxylating activity of mushroom tyrosinase has been utilized for over a decade in the preparation of 2-hydroxyestradiol from estradiol, yet this same enzyme is known to function as an oxidant of o-dihydric compounds to the corresponding o-quinones. It was questioned why catechol estrogens do not react further, particularly since the tyrosinase activity (hydroxylating) is exceeded many fold by the diphenol oxidase activity of the enzyme. This report describes that the catechol estrogen will react in presence of enzyme but only if catechol is also present. Diphenol oxidase activity was measured either by the polarographic oxygen-utilization technique or by changes in the absorption spectrum at 206 and 256 nm. The enzyme activity was standardized with catechol (Km = 5.2 X 10(-4) M). The steroid did not react with the enzyme if catechol was absent. With catechol, the steroid reacted rapidly and completely (Km = 4.2 X 10(-4) M). The consumption of oxygen with catechol and 2-hydroxyestradiol was additive and stoichiometric, 1 g-atom oxygen/mol of either substrate. Kinetic analysis shows that catechol functions as an activator of the tyrosinase.     

Composite electrochemical biosensors: a comparison of three different electrode matrices for the construction of amperometric tyrosinase biosensors

A comparison of the behaviour of three different rigid composite matrices for the construction of amperometric tyrosinase biosensors, which are widely used for the detection of phenolic compounds, is reported. The composite electrode matrices were, graphite-Teflon; reticulated vitreous carbon (RVC)-epoxy resin; and graphite-ethylene/propylene/diene (EPD) terpolymer. After optimization of the experimental conditions, different aspects regarding the stability of the three composite tyrosinase electrode designs were considered and compared. A better reproducibility of the amperometric responses was found with the graphite-EPD electrodes, whereas a longer useful lifetime was observed for the graphite-Teflon electrodes. The kinetic parameters of the tyrosinase reaction were calculated for eight different phenolic compounds, as well as their corresponding calibration plots. The general trend in sensitivity was graphite-EPD>graphite-Teflon>RVC-epoxy resin. A correlation between sensitivity and the catalytic efficiency of the enzyme reaction for each phenolic substrate was found. Furthermore, differences in the sensitivity order for the phenolic compounds were observed among the three biocomposite electrodes, which suggests that the nature of the electrode matrix influences the interactions in the tyrosinase catalytic cycle.     

Entrapping of Tyrosinase in a System of Reverse Micelles

The enzymatic activity of tyrosinase was studied both in aqueous and organic media. In the latter case tyrosinase was entrapped in a system of reverse micelles of Aerosol OT in octane. At hydration degree 25, when the inner cavity of the reverse micelles was comparable with the size of a tetrameric tyrosinase form known for aqueous solutions, an optimum level of catalytic activity was observed. Another peak of catalytic activity of tyrosinase was observed at hydration degree 12, when the size of the inner cavity of the reverse micelles was consistent with a monomeric form of tyrosinase. Thus, the system of reverse micelles can be exploited as a medium for the investigation of the monomeric form of tyrosinase, which is unstable in aqueous solution.     

Silica sol-gel composite film as an encapsulation matrix for the construction of an amperometric tyrosinase-based biosensor

An amperometric tyrosinase enzyme electrode for the determination of phenols was developed by a simple and effective immobilization method using sol-gel techniques. A grafting copolymer was introduced into sol-gel solution and the composition of the resultant organic-inorganic composite material was optimized, the tyrosinase retained its activity in the sol-gel thin film and its response to several phenol compounds was determined at 0 mV vs. Ag/AgCl (sat. KCl). The dependences of the current response on pH, oxygen level and temperature were studied, and the stability of the biosensor was also evaluated. The sensitivity of the biosensor for catechol, phenol and p-cresol was 59.6, 23.1 and 39.4 microA/mM, respectively. The enzyme electrode maintained 73% of its original activity after intermittent use for three weeks when storing in a dry state at 4 degrees C.     

Characteristics of lipase-catalyzed hydrolysis of olive oil in AOT-isooctane reversed micelles

Candida rugosa lipase solubilized in organic solvents in the presence of both surfactant and water could catalyze the hydrolysis of triglycerides, and kinetic analysis of the lipase-catalyzed reaction was found to be possible in this system. Among eight organic solvents tested, isooctane was most effective for the hydrolysis of olive oil in reversed micelles. Temperature effect, pH profile, K(m,app) and V(max,app) were determined. Among various chemical compounds, Cu(2+), Hg(2+), and Fe(3+) inhibited lipase severely. But the enzyme activity was restorable partially by adding histidine or glycine to the system containing these metal ions. The enzyme activity was dependent on R (molar ratio of water to surfactant) and maximum activity was obtained at R = 10.5. Upon addition of glycerol to the reversed micelles, lipase activity was affected in a different fashion depending on the R values. Stability of the lipase in reversed micelles was also dependent on R, and it was most stable at R = 5.5.     

The Sonogel-Carbon materials as basis for development of enzyme biosensors for phenols and polyphenols monitoring: a detailed comparative study of three immobilization matrixes

Three amperometric biosensors based on immobilization of tyrosinase on a new Sonogel-Carbon electrode for detection of phenols and polyphenols are described. The electrode was prepared using high energy ultrasounds (HEU) directly applied to the precursors. The first biosensor was obtained by simple adsorption of the enzyme on the Sonogel-Carbon electrode. The second and the third ones, presenting sandwich configurations, were initially prepared by adsorption of the enzyme and then modification by mean of polymeric membrane such as polyethylene glycol for the second one, and the ion-exchanger Nafion in the case of the third biosensor. The optimal enzyme loading and polymer concentration, in the second layer, were found to be 285 U and 0.5%, respectively. All biosensors showed optimal activity at the following conditions: pH 7, -200 mV, and 0.02 mol l(-1) phosphate buffer. The response of the biosensors toward five simple phenols derivatives and two polyphenols were investigated. It was found that the three developed tyrosinase Sonogel-Carbon based biosensors are in satisfactory competitiveness for phenolic compounds determination with other tyrosinase based biosensors reported in the literature. The detection limit, sensitivity, and the apparent Michaelis-Menten constant K(m)(app) for the Nafion modified biosensor were, respectively, 0.064, 0.096, and 0.03 micromol, 82.5, 63.4, and 194 nA micromol(-1)l(-1), and 67.1, 54.6, and 12.1 micromol l(-1) for catechol, phenol, and 4-chloro-3-methylphenol. Hill coefficient values (around 1 for all cases), demonstrated that the immobilization method does not affect the nature of the enzyme and confirms the biocompatibility of the Sonogel-Carbon with the bioprobe. An exploratory application to real samples such as beers, river waters and tannery wastewaters showed the ability of the developed Nafion/tyrosinase/Sonogel-Carbon biosensor to retain its stable and reproducible response.     

Reversed micelles of polymeric surfactants in nonpolar organic solvents. A new microheterogeneous medium for enzymatic reactions.

A new microheterogeneous non-aqueous medium for enzymatic reactions, based on reversed micelles of a polymeric surfactant, was suggested. The surfactant termed CEPEI, was synthesized by successive alkylation of poly(ethyleneimine) with cetyl bromide and ethyl bromide and was found to be able to solubilize considerable amounts of water in benzene/n-butanol mixtures. The hydrodynamic radius of polymeric-reversed micelles was estimated to be in the range 22-51 nm, depending on the water content of the system, as determined by means of the quasi-elastic laser-light scattering. Polymeric reversed micelles were capable of solubilizing enzymes (alpha-chymotrypsin and laccase) in nonpolar solvents with retention of catalytic activity. Due to the strong buffering properties of CEPEI over a wide pH range, it could maintain any adjusted pH inside hydrated reversed micelles. It was found that catalytic behavior of enzymes entrapped in polymeric reversed micelles was rather insensitive to the pH of the buffer solution introduced into the system as an aqueous component, but determined mostly by acid-base properties of the polymeric surfactant itself. Both catalytic activity and stability of entrapped alpha-chymotrypsin and laccase were found to increase with increasing water content of the system. Under certain conditions, the entrapment of alpha-chymotrypsin into CEPEI reversed micelles resulted in a considerable increase in catalytic activity and stability as compared to aqueous solution. CEPEI reversed micelles were demonstrated to be promising enzyme carriers for use in membrane reactors. Owing to the large dimensions of CEPEI reversed micelles, they are effectively kept back by a semipermeable membrane, thus allowing an easy separation of the reaction product and convenient recovery of the enzyme.     

Stable mediated amperometric biosensors using a graphite electrode embedded with tetrathiafulvalene in silicone oil

A new method has been developed to incorporate the mediator, tetrathiafulvalene (TTF), to the electrode/solution interface of an amperometric biosensor. TTF was dissolved in methylphenyl polysiloxane (silicone oil) and embedded in a graphite disc electrode. The mediator was able to diffuse to the electrode surface at an electrocatalytically significant speed. The storage of TTF in the inert polysiloxane provided a long-lasting and stable mediator supply.

TTF-silicone oil electrodes with immobilized glucose oxidase, xanthine oxidase, or amino acid oxidase exhibited sensitive, fast and reproducible responses. The glucose oxidase electrode was very stable for at least 2 months when stored at 4°C. Together with flow injection analysis (FIA), the enzyme electrodes were reused for at least 500 repeated analyses during a 25 h operation without losing their initial activity.     

Immobilization of tyrosinase in polysiloxane/polypyrrole copolymer matrices

Immobilization of tyrosinase in conducting copolymer matrices of pyrrole functionalized polydimethylsiloxane/polypyrrole (PDMS/PPy) was achieved by electrochemical polymerization. The polysiloxane/polypyrrole/tyrosinase electrode was constructed by the entrapment of enzyme in conducting matrices during electrochemical copolymerization. Maximum reaction rate (V(max)) and Michaelis-Menten constant (K(m)) were investigated for immobilized enzyme. Enzyme electrodes were prepared in two different electrolyte/solvent systems. The effect of supporting electrolytes, p-toluene sulfonic acid and sodium dodecyl sulfate on the enzyme activity and film morphology were determined. Temperature and pH optimization, operational stability and shelf-life of enzyme electrodes were also examined. Phenolic contents of green and black tea were determined by using enzyme electrodes.     

Integrated nanoparticle-biomolecule systems for biosensing and bioelectronics

The similar dimensions of biomolecules such as enzymes, antibodies or DNA, and metallic or semiconductor nanoparticles (NPs) enable the synthesis of biomolecule-NP hybrid systems where the unique electronic, photonic and catalytic properties of NPs are combined with the specific recognition and biocatalytic properties of biomolecules. The unique functions of biomolecule-NP hybrid systems are discussed with several examples: (i) the electrical contacting of redox enzymes with electrodes is the basis for the development of enzymatic electrodes for amperometric biosensors or biofuel cell elements. The reconstitution of the apo-glucose oxidase or apo-glucose dehydrogenase on flavin adenine dinucleotide (FAD)-functionalized Au NPs (1.4 nm) associated with electrodes, or on pyrroloquinoline quinone (PQQ)-functionalized Au NPs (1.4 nm) associated with electrodes, respectively, yields electrically contacted enzyme electrodes. The aligned, reconstituted enzymes on the electrode surfaces reveal effective electrical contacting, and the glucose oxidase and glucose dehydrogenase reveal turnover rates of 5000 and 11,800 s(-1), respectively. (ii) The photoexcitation of semiconductor nanoparticles yields fluorescence with a wavelength controlled by the size of the NPs. The fluorescence functions of semiconductor NPs are used to develop a fluorescence resonance energy transfer (FRET) assay for nucleic acids, and specifically, for analyzing telomerase activity in cancer cells. CdSe-ZnS NPs are functionalized by a primer recognized by telomerase, and this is elongated by telomerase extracted from HeLa cancer cells in the presence of dNTPs and Texas-red-functionalized dUTP. The dye integrated into the telomers allows the FRET process that is intensified as telomerization proceeds. Also, the photoexcited electron-hole pair generated in semiconductor NPs is used to generate photocurrents in a CdS-DNA hybrid system associated with an electrode. A redox-active intercalator, methylene blue, was incorporated into a CdS-duplex DNA monolayer associated with a Au electrode, and this facilitated the electron transfer between the electrode and the CdS NPs. The direction of the photocurrent was controlled by the oxidation state of the intercalator. (iii) Biocatalysts grow metallic NPs, and the absorbance of the NPs provides a means to assay the biocatalytic transformations. This is exemplified with the glucose oxidase-induced growth of Au NPs and with the tyrosinase-stimulated growth of Au NPs, in the presence of glucose or tyrosine, respectively. The biocatalytic growth of the metallic NPs is used to grow nanowires on surfaces. Glucose oxidase or alkaline phosphatase functionalized with Au NPs (1.4 nm) acted as 'biocatalytic inks' for the synthesis of metallic nanowires. The deposition of the Au NP-modified glucose oxidase, or the Au NP-modified alkaline phosphatase on Si surfaces by dip-pen nanolithography led to biocatalytic templates, that after interaction with glucose/AuCl4- or p-aminophenolphosphate/Ag+, allowed the synthesis of Au nanowires or Ag nanowires, respectively.     

Thermobarostability of alpha-chymotrypsin in reversed micelles of aerosol OT in octane solvated by water-glycerol mixtures

Thermostability of alpha-chymotrypsin at normal pressure in reversed micelles depends on both an effective surfactant solvation degree and glycerol content in the system. The difference in alpha-chymotrypsin stability in reversed micelles at various glycerol concentrations [up to 60% (v/v)] was more pronounced at high surfactant degrees of solvation, R >/= 16. After a 1-h incubation at 40 degrees C in "aqueous" reversed micelles (in the absence of glycerol), alpha-chymotrypsin retained only 1% of initial catalytic activity and 10, 22, 59, and 48% residual activity in glycerol-solvated micelles with 20, 30, 50, and 60% (v/v) glycerol, respectively. The explanation of the observed effects is given in the frames of micellar matrix structural order increasing in the presence of glycerol as a water-miscible cosolvent that leads to the decreasing mobility of the alpha-chymotrypsin molecule and, thus the increase of its stability. It was found that glycerol or hydrostatic pressure could be used to stabilize alpha-chymotrypsin in reversed micelles; a lower pressure is necessary to reach a given level of enzyme stability in the presence of glycerol.     

Stability of an extreme halophilic alkaline phosphatase from Halobacterium salinarium in non-conventional medium

Alkaline p-nitrophenylphosphate phosphatase from the halophilic archaeon Halobacterium salinarum (earlier halobium) was solubilised in organic medium using reversed micelles of hexadecyltrimethylammonium bromide in cyclohexane, with 1-butanol as co-surfactant. The stability of alkaline p-nitrophenylphosphate phosphatase in this system was studied at different conditions, w(0) ([H(2)O]/[surfactant]), salt concentration, with and without Mn(+2). At all the conditions assayed, alkaline p-nitrophenylphosphate phosphatase was more stable in reversed micelles than in bulk aqueous solution (at 25 degrees C). The stabilisation effect of the reversed micelles was dramatic when the enzyme was dialysed against Mn(+2)-free buffer since the enzyme lost all the activity within 90 min in aqueous medium, but it retained approximately 72% of the initial enzymatic activity for 90 min in reversed micelles.     

Substrate-induced stability of the lipase from candida cylindracea in reversed micelles

Summary Activity of lipase (candida cylindracea) in reversed micelles was found to be sustained over extended periods of time in the presence of amphiphilic substrates. Esterification of palmitic or oleic acid and octanol was studied to characterize the lipase activity in AOT/isooctane reversed micelles. Complete conversion was possible even in the presence of stoichiometric excess of water. In the absence of acyl substrates, the enzyme lost all its activity within a few hours in reversed micelles. Thermal effects on the enzyme activity were studied, and the enzyme stability in reversed micelles was compared to that in a bulk organic solvent.