Cell surface hydrophobicity and slime production of Staphylococcus epidermidis Brazilian isolates

The cell surface hydrophobicity of 60 isolates and three reference strains of Staphylococcus epidermidis was assayed by means of bacterial aggregation in liquid broth, phosphate-buffered saline, and in ammonium sulfate, as well as by affinity of the bacteria to n-hexadecane and polystyrene surfaces. In order to better characterize the isolates, the influence of bacterial growth time and enzyme treatment on cell hydrophobicity and the analysis of the slime production were also investigated. The strains presented the following profiles when assayed by the ammonium sulfate aggregation test (SAT): SAT < 1M, SAT 1M - <2M, SAT 2M - <4M, and SAT >or=4M. When SAT < 1M, the strains showed positive results for most of the cell surface hydrophobicity tests. None of the strains belonging to the groups with SAT >or= 1M showed spontaneous aggregation (SA), auto-aggregation (AA), or glass adherence, albeit 32 (62.7%) strains were polystyrene adherent and 42 (82.3%) presented weak adherence to n-hexadecane (>20%). The best correlation of the results was found among the AA and glass adherence tests (100%), followed by SA/ glass adherence (98%) and SA/ AA test (98%). The polystyrene adherence test and microbial adherence to n-hexadecane test (MATH) showed 78% correlation. Proteinase K treatment reduced bacterial adherence to polystyrene, but did not influence the SAT values. Three distinct groups of strains were distinguished by the polystyrene micromethod and glass tube adherence assay: 0.0-0.4 O.D. group, including non-glass adherent isolates; 0.5-0.7 O.D. group, including strains with variable profiles (adherent or non-adherent); and 0.8-1.3 O.D. group, composed of glass-adherent strains. Evaluation by a single method seemed not to reliably determine the surface hydrophobicity characteristics of S. epidermidis clinical isolates. Auto-aggregation properties of the strains that adhered to glass seemed related to slime expression, rather than cell surface hydrophobicity. Data also suggested involvement of protein components in adherence to polystyrene, but not in auto-aggregation properties assayed by SAT.     

Cell surface hydrophobicity ofStaphylococcus aureus measured by the salt aggregation test (SAT)

Well-defined laboratory strains as well as 72 clinical strains ofStaphylococcus aureus isolated from bovine mastitis were investigated for surface hydrophobicity by the salt aggregation test (SAT).Staphylococcus aureus strain Cowan 1, rich in protein A and fibronectin-binding surface proteins, was found to show high surface hydrophobicity, whereas strain Wood 46, deficient in these surface proteins, showed low surface hydrophobicity. SAT showed a significant difference in surface hydrophobicity (P<0.001) between protein A-positive and A-negative strains measured by ²-test analysis. Comparison of SAT values with results obtained from hydrophobic interaction chromatography (HIC) showed a good correlation (P<0.025). A high-level protein-A-producing mutant (SA 113prA-3) showed increased surface hydrophobicity as compared with the parent strain (SA 113), whereas ten protein-A-negative mutants showed low surface hydrophobicity in SAT. Of the 72 clinical isolates tested by SAT, 47 (65%) showed autoaggregating properties, i.e., the strains aggregated even in isotonic buffers. Tween 80 (1% vol/vol) and ethylene glycol (50% vol/vol) prevented autoaggregation of some hydrophobic strains aggregating in phosphate-buffered saline. However, 2M of a chaotropic agent (NaSCN) was more efficient in preventing autoaggregation of the strains tested. Heating of cell suspensions to 80°C or 100°C as well as trypsin andStreptomyces griseus protease treatment generally caused a decrease in the cell surface hydrophobicity. This indicates that protein A, fibronectin-binding proteins, and probably other as yet unidentified proteins contribute to the high surface hydrophobicity of most strains isolated from bovine mastitis.     

Evaluation of Adherence,Hydrophobicity, Aggregation,and Biofilm Development of <Emphasis Type="Italic">Flavobacterium johnsoniae</Emphasis>-Like Isolates

Flavobacterium spp. isolates have been identified in diverse biofilm structures, but the mechanism of adherence has not been elucidated. The absence of conventional biofilm-associated structures such as fimbriae, pili, and flagella suggest that surface hydrophobicity, and/or autoaggregation and coaggregation may play an important role in adherence and biofilm formation. The biofilm-forming capacity of 29 Flavobacterium johnsoniae-like isolates obtained from South African aquaculture systems was assessed using microtiter plate assays. The role of hydrophobicity [salting aggregation test (SAT) and bacterial adherence to hydrocarbons (BATH) assays], autoaggregation, and coaggregation on biofilm formation by Flavobacterium spp. was also investigated, while biofilm structure was examined using flow cells and microscopy. All isolates displayed a hydrophilic nature, but showed varying levels of adherence in microtiter assays. Significant negative correlations were observed between adherence and biofilm-forming capacity in nutrient-poor medium at 26°C and BATH hydrophobicity and motility, respectively. Isolates displayed strain-to-strain variation in their autoaggregation indices and their abilities to coaggregate with various Gram-negative and Gram-positive organisms. Microcolony and/or biofilm development were observed microscopically, and flavobacterial isolates displayed stronger biofilm structures and interaction with a Vibrio spp. isolate than with an Aeromonas hydrophila isolate. The role of extracellular polysaccharides and specific outer membrane proteins will have to be examined to reveal mechanisms of adherence and coaggregation employed by biofilm-forming F. johnsoniae-like strains.     

A comparison of three methods for assaying hydrophobicity of pathogenic vibrios

The surface hydrophobicity of strains of Vibrio alginolyticus, V. carchariae, V. damsela, V. harveyi and V. vulnificus , isolated from either diseased cultured grouper ( Epinephelus malabaricus ) or penaeids ( Penaeus monodon and P. japonicus ) was determined using three different methods:the salt aggregation test (SAT), bacterial adhesion to hydrocarbons test (BATH), and adherence to nitrocellulose filters test (NCF). The results obtained indicate that all the strains tested showed some degree of hydrophobicity with the type strain of V. harveyi (ATCC 25919) showing strong hydrophobic properties in all the methods. The SAT method used in the present study was modified to a microtitre tray test, an easier test to read than the conventional in glass slide methodology. All the 13 test strains were positive in the BATH test when n -octane was used as the solvent, but only one strain was positive when n -hexadecane was used as the solvent. It is suggested that this method using n -octane as solvent is suitable for assaying the hydrophobicity of pathogenic vibrios isolated from diseased aquatic animals.     

Comparative adherence to human A549 cells, plant fibronectin-like protein, and polystyrene surfaces of four Pseudomonas fluorescens strains from different ecological origin

The main objective of this study was to compare the adherence properties of four Pseudomonas fluorescens isolates from different ecological niches (human tissue, rhizosphere, drinking water, and cow milk). The substrates used to test P. fluorescens adherence were as follows: cultured human respiratory epithelial cells A549, immobilized plant fibronectin-like protein, and polystyrene. For all the experiments, bacteria were grown at 27 degrees C. The adherence assay to human cells was performed at 37 degrees C, whereas adherence to fibronectin and polystyrene was done at 27 degrees C. The four strains tested adhered to A549 cells but showed different adherence patterns. At 3 h, the milk isolate showed an aggregative adherence phenotype, whereas the three other isolates showed a diffuse adherence pattern. With a longer incubation time of 24 h, the aggregative pattern of the milk isolate disappeared, the adherence of the clinical strain increased, the adherence of the water isolate decreased, and morphological changes in A549 cells were observed with the clinical, water, and soil isolates. The four strains tested formed biofilms on polystyrene dishes. The clinical and milk isolates were the more efficient colonizers of polystyrene surfaces and also the more adherent to immobilized plant fibronectin-like protein. There was no relation between bacterial surface hydrophobicity and P. fluorescens adherence to the substrates tested. The main conclusions of these results are that P. fluorescens is an adherent bacterium, that no clear correlation exists between adherence and ecological habitat, and that P. fluorescens can adhere well to substrates not present in its natural environment.     

Influence of the growth conditions on the hydrophobicity of Renibacterium salmoninarum evaluated by different methods

The influence of medium and salinity on the cell surface hydrophobicity of Renibacterium salmoninarum was investigated using three different methods: bacterial adherence to hydrocarbons (BATH), salt agglutination test (SAT), and binding to nitrocellulose filters (NCF). The possible relationship among hydrophobicity, haemagglutination and adherence to cell lines was also evaluated. R. salmoninarum showed to be highly hydrophobic regardless of the growth conditions or technique employed. Nevertheless, slight differences can be detected depending on the method used. In the SAT and NCF assays very uniform values were obtained within the strains. All the R. salmoninarum isolates agglutinated in (NH4)2SO4 in a range of 0.05-0.2 M and displayed a 77-100% of adherence to nitrocellulose filters. However, more variable results were observed in the BATH method depending on the hydrocarbon, buffer and strain employed. Although all of the isolates produced haemagglutinins for homeotherm erythrocytes, the majority of them failed to agglutinate poikilothermic red blood cells and were unable to adhere to fish cell lines. Therefore, a general correlation among hydrophobicity, agglutinating capacity for fish erythrocytes and adherence to fish cells can not be established for R. salmoninarum.     

The effect of chlorhexidine and gentian violet on the adherence of <Emphasis Type="Italic">Candida</Emphasis> spp. to urinary catheters

Urinary tract infection associated with catheters is the most common infection in the hospital environment. The adherence of microorganisms to the surface is a determining factor in colonization and infection. Antiseptics such as chlorhexidine and gentian violet have been shown to be effective against yeasts, as well as having low toxicity and being low-cost. The objective of the present study was to evaluate whether prior treatment of siliconized latex urinary catheters with antiseptics reduces the adherence of yeasts. Two reference strains of C. albicans (ATCC 645448 and ATCC 90028) and six strains isolated from catheter, two each of C. albicans, C. tropicalis, and C. parapsilosis, were used. An in␣vitro study of adherence was carried out with previously treated catheters, in separate experiments of 1 h and 24 h of incubation under continued shaking. The relative hydrophobicity of the cell surface of the yeasts before and after 1 h of exposure to chlorhexidine was determined. The results demonstrated that both treatments were effective in controlling the adherence of yeast to the catheter (P < 0.0001), and that the hydrophobicity of the eight strains significantly increased after contact with chlorhexidine (P < 0.0001). These results suggest that the antimicrobial activity of chlorhexidine and gentian violet reduces the adherence of the microorganisms to the catheter.     

Biodegradation of dimethyl phthalate by Sphingomonas sp. isolated from phthalic-acid-degrading aerobic granules

This study isolated nine strains of aerobic phenol-degrading granules. These isolates (I1–I9) were characterized using 16S rRNA gene sequencing, with γ-Proteobacteria as the dominant strains in the aerobic granules. While most strains demonstrated either high phenol-degrading capabilities or auto-aggregation capabilities, three isolates, I2, I6, and I8 showed both features. These findings contradict the previous view that auto-aggregation and phenol degradation are mutually exclusive in aerobic granules. Strains I2 and I8 independently formed single-culture aerobic granules except for I3. Anti-microbial activity test results indicated that strains I2 and I8 inhibited growth of strain I3. However, co-culturing I3 with I2 or I8 helped to form granules.     

Toxinogenicity and markers of pathogenicity of Pseudomonas aeruginosa strains isolated from patients with tumor diseases

Potential virulence factors (elastase, proteinase, lipase, phospholipase C, alginate) as well as surface properties (hydrophobicity, motility) were determined in 103Pseudomonas aeruginosa strains isolated from patients with cancer. Nontypable strains were the dominant group (60%), followed by serotypes O11 (17%), O12 (7%) and O4 (5%). Seventy-one strains (69%) produced high level of elastase (10–60 mg/L), 87% of the strains possessed high activity of proteinase (bacterial) (10–250 mg/L) and 69% of the strains demonstrated higher level of lipase (20–150 U/mL); these elevated levels of enzymes were associated mainly with nontypable strains. On the other hand, 79% of the strains did not produce or produced only a low level of phospholipase C and 60% of isolates did not manifest any or very low production of alginate. Hydrophobicity demonstrated by adherence of the bacteria to xylene was shown by 69% of strains; 94% of strains aggregated with ammonium sulfate. Motility in the range of 31–80 mm was found in 76 strains (74%). The considerable virulence of testedP. aeruginosa strains was confirmed. The nontypable strains manifested the most frequent group with high level of elastase, proteinase, lipase, hydrophobicity and motility.     

Xylitol and Erythritol Decrease Adherence of Polysaccharide-Producing Oral Streptococci

Xylitol consumption decreases counts of mutans streptococci. However, the mechanism behind this decrease is not well understood. We studied not only type strains and clinical isolates of mutans streptococci, but also other polysaccharide-forming oral streptococci. Growth inhibition and adherence of cells to a smooth glass surface—reflecting synthesis of water-insoluble polysaccharides were studied in the presence of 2% (0.13 mol/l) and 4% (0.26 mol/l) xylitol. The effect of xylitol was compared to a novel polyol sweetener, erythritol. Except for Streptococcus mutans 10449 and S. sobrinus OMZ 176, the glass surface adhesion of most polysaccharide-forming streptococci was reduced by the presence of both 4% xylitol and erythritol. For the S. mutans and S. sobrinus type strains, the growth inhibition with 4% xylitol and erythritol was 36–77% and for the clinical S. mutans isolates 13–73%. Of the other oral streptococci, only S. sanguinis was inhibited with 4% xylitol (45–55%). For both polyols, the magnitude of the growth inhibition observed was not associated with the magnitude of the decrease in adherence (xylitol: r = −0.18; erythritol: r = 0.49). In conclusion, both xylitol and erythritol can decrease polysaccharide-mediated cell adherence contributing to plaque accumulation through a mechanism not dependent on growth inhibition.     

Factors associated with adherence to and biofilm formation on polystyrene by Stenotrophomonas maltophilia: the role of cell surface hydrophobicity and motility

We tested 40 clinical Stenotrophomonas maltophilia strains to investigate the possible correlation between adherence to and formation of biofilm on polystyrene, and cell surface properties such as hydrophobicity and motility. Most of the strains were able to adhere and form biofilm, although striking differences were observed. Eleven (27.5%) of the strains were hydrophobic, with hydrophobicity greatly increasing as S. maltophilia attached to the substratum. A positive correlation was observed between hydrophobicity and levels of both adhesion and biofilm formation. Most of the isolates showed swimming and twitching motility. A highly significant negative correlation was observed between swimming motility and level of hydrophobicity. Hydrophobicity is thus a significant determinant of adhesion and biofilm formation on polystyrene surfaces in S. maltophilia.     

A rapid bioluminescence method for quantifying bacterial adhesion to polystyrene

Bioluminescence ATP analysis has been used to assess bacterial adhesion with hydrophobic polystyrene tubes as the attachment surface. The assay was performed at 37 degrees C and pH 6.8 with a 10 min incubation period. A variation of more than 200-fold was observed in the adherence capacity of 34 urinary isolates of Escherichia coli, and organisms could be classified as strongly or weakly adherent. All strains capable of strong adhesion possessed both type 1 fimbriae and flagella, and maximum adhesion was expressed during the exponential growth phase. Attachment was in all cases virtually eliminated by addition of 2.5% (w/v) D-mannose to the incubation buffer. Conversely, strains which were deficient in type 1 fimbriae or flagella, or both, were weakly adherent during all phases of growth. There was no correlation between adherence of E. coli to polystyrene and adherence to buccal or uroepithelial cells, but there was a significant association with adherence to uromucoid (P less than 0.002).     

Auto-aggregation and Co-aggregation ability in bifidobacteria and clostridia

A total of 142 human and 88 calf bifidobacteria were isolated and identified; approximately 12 % of all isolated strains exhibited auto-aggregation (Agg) phenotype (Agg+). Properties considered to be predicting for their adhesion to intestine, i.e. auto-aggregation, and hydrophobicity were determined by xylene extraction in 18 human and 8 calf origin bifidobacteria. Co-aggregation of 8 human bifidobacteria with 8 clostridia was also evaluated. Agg varied between 16.3 and 96.4 %, hydrophobicity values ranged from 0 to 82.8 %. The strongest Agg and hydrophobicity were observed in B. bifidum and B. merycicum isolates. However, there were no statistically significant correlations between these two properties. Variability in the percentage of Agg and hydrophobicity was observed after cultivation of bifidobacteria on different carbon sources. All bifidobacteria showed co-aggregation ability with clostridia tested but there were remarkable differences depending on specific combinations of strains. The bifidobacterial strains with the highest ability to co-aggregate with clostridia were B. bifidum I4 and B. longum I10 isolated from infants; these strains gave also high values of Agg. Agg properties together with co-aggregation ability with potential pathogen can be used for preliminary selection of probiotic bacteria.     

Alterations in surface hydrophobicity ofAcinetobacter baumannii induced by meropenem

Six strains ofAcinetobacter baumannii out of eleven strains tested revealed a strong hydrophobic character. This was demonstrated by adherence of bacteria to xylene in the range of 90–94%. Changes in surface hydrophobicity of these strains were studied after treatment with meropenem at subinhibitory concentrations (sub-MICs) (1/4, 1/8, 1/16 or 1/32 of the MICs). All strains showed a reduced adherence to xylene after the action of meropenem at 1/4 or 1/16 of the MICs. Hydrophobicity of the treated bacteria was decreased to 1.3–70% (1/16 of the MICs) or to 12–86% (1/4 of the MICs), depending on the strain. A decrease in surface hydrophobicity of three strains was also observed after their exposure to meropenem at 1/8 of the MICs (to 18–71% of the control values). Meropenem at 1/32 of the MICs practically did not affect bacterial hydrophobic properties, with the exception of one strain.     

Enhancement of <Emphasis Type="Italic">Candida albicans</Emphasis> Virulence After Exposition to Cigarette Mainstream Smoke

The habit of cigarette smoking is associated with higher oral candidal carriage and possible predisposition to oral candidosis. The effects of exposure to smoke on the virulence properties of oral yeasts remain obscure. Hence, we showed in vitro the effect of cigarette smoke condensate (CSC) on ten clinical isolates of Candida albicans obtained from nonsmoking volunteers, as well the type-strain CBS562. CSC was generated by complete burn of five commercial cigarettes in an in-house smoking machine and used to prepare the culture broth in which the strains were grown. In 24-h intervals (T₂₄, T₄₈, and T₇₂), the cells were harvested, washed, subcultured, and the resultant growth were evaluated for possible variations for secreted aspartyl protease, phospholipase, chondroitinase, and hemolysins, adhesion to acrylic and cell surface hydrophobicity (CSH). The results indicated a temporal increase in the secretion rates of enzymes, particularly when yeast cells were exposed to CSC for 48–72 h (P < 0.05). Similarly, adhesion to acrylic and CSH increased with exposure period (P < 0.05). Based on foregoing, we concluded that CSC may promote significant enhance in the secretion of candidal histolytic enzymes and adherence to denture surfaces, thereby promoting oral yeast carriage and possible infection.     

Relation between phylogenetic position, lipid metabolism and butyrate production by different Butyrivibrio-like bacteria from the rumen

The Butyrivibrio group comprises Butyrivibrio fibrisolvens and related Gram-positive bacteria isolated mainly from the rumen of cattle and sheep. The aim of this study was to investigate phenotypic characteristics that discriminate between different phylotypes. The phylogenetic position, derived from 16S rDNA sequence data, of 45 isolates from different species and different countries was compared with their fermentation products, mechanism of butyrate formation, lipid metabolism and sensitivity to growth inhibition by linoleic acid (LA). Three clear sub-groups were evident, both phylogenetically and metabolically. Group VA1 typified most Butyrivibrio and Pseudobutyrivibrio isolates, while Groups VA2 and SA comprised Butyrivibrio hungatei and Clostridium proteoclasticum, respectively. All produced butyrate but strains of group VA1 had a butyrate kinase activity <40 U (mg protein)⁻¹, while strains in groups VA2 and SA all exhibited activities >600 U (mg protein)⁻¹. The butyrate kinase gene was present in all VA2 and SA bacteria tested but not in strains of group VA1, all of which were positive for the butyryl-CoA CoA-transferase gene. None of the bacteria tested possessed both genes. Lipase activity, measured by tributyrin hydrolysis, was high in group VA2 and SA strains and low in Group VA1 strains. Only the SA group formed stearic acid from LA. Linoleate isomerase activity, on the other hand, did not correspond with phylogenetic position. Group VA1 bacteria all grew in the presence of 200 μg LA ml⁻¹, while members of Groups VA2 and SA were inhibited by lower concentrations, some as low as 5 μg ml⁻¹. This information provides strong links between phenotypic and phylogenetic properties of this group of clostridial cluster XIVa Gram-positive bacteria.     

Surface hydrophobicity of "rheumatogenic" and "nephritogenic" strains of group A streptococci and the ultrastructural surface feature of pharyngeal cells exposed to group A streptococci.

The present study was carried out to determine the surface hydrophobicity of group A streptococcal strains responsible for rheumatic fever (RF), "rheumatogenic" strains (RG strains) and strains causing glomerulonephritis, "nephritogenic" strains (NG strains) in relation to their adhesion to human pharyngeal cells. Scanning electronmicroscopic (SEM) studies were carried out to the difference, if any, in the adherence of group A streptococci (M type 5) to pharyngeal and buccal cells (PEC and BEC). By employing two techniques for hydrophobicity determination, salt aggregation titre (SAT) and n-hexadecane binding technique, it was observed that RG strains (M5, M1 and M6) were more hydrophobic than NG strain, M49. However, NG strain M12 was almost equally as hydrophobic as RG strains. The adherence of RG strains, except M1 and M24, to PEC was greater in number than that of NG strains. Although M1 strain was hydrophobic, its adherence to PEC was less. Pepsin and trypsin treatment with streptococci reduced the hydrophobicity and adherence of RG and NG strains to PEC. SEM studies revealed firmly adhered indigenous bacteria on PEC and BEC. Streptococci (M5) adhered more to PEC than to BEC. SEM studies also showed that PEC had a peculiar ultrastructural surface feature to which streptococci adhered. These findings suggest that streptococcal hydrophobicity alone does not determine their adhesion to PEC. The surface nature of PEC might be a characteristic feature of the epithelial cells that allows streptococci to adhere and colonize or it might be a consequence of streptococcal adhesion.     

Adherence ability and serum resistance of different hospital clusters of Acinetobacter baumannii

The role of mechanical ventilation and catheters in favouring Acinetobacter baumannii infections needs to be better understood. This study evaluated the adherence of 19 isolates of different hospital clusters of A. baumannii to abiotic surfaces and epithelial cells (HEp-2). Of the hydrophobic isolates, 80% adhered to polystyrene, indicating a close relationship between hydrophobicity and adherence. All isolates adhered to epithelial cells to different degrees, and 73·7% showed an aggregated pattern. Analysis of the serum resistance of catheter-tip isolates showed that all were resistant. These worrisome results showed that the high capacity of A. baumannii to adhere to surfaces and survive in human serum could hinder treatment and control of this pathogen.     

Role of hydrophobicity in bacterial adherence to carbon nanostructures and biofilm formation

The role of cell and surface hydrophobicity in the adherence of the waterborne bacterium Mycobacterium smegmatis to nanostructures and biofilm formation was investigated. Carbon nanostructures (CNs) were synthesized using a flame reactor and deposited on stainless steel grids and foils, and on silicon wafers that had different initial surface hydrophobicities. Surface hydrophobicity was measured as the contact angle of water droplets. The surfaces were incubated in suspensions of isogenic hydrophobic and hydrophilic strains of M. smegmatis and temporal measurements of the numbers of adherent cells were made. The hydrophobic, rough mutant of M. smegmatis adhered more readily and formed denser biofilms on all surfaces compared to its hydrophilic, smooth parent. Biofilm formation led to alterations in the hydrophobicity of the substratum surfaces, demonstrating that bacterial cells attached to CNs are capable of modifying the surface characteristics.     

Role of hydrophobicity in adhesion of wild yeast isolated from the ultrafiltration membranes of an apple juice processing plant

The role of cell surface hydrophobicity in the adhesion to stainless steel (SS) of 11 wild yeast strains isolated from the ultrafiltration membranes of an apple juice processing plant was investigated. The isolated yeasts belonged to four species: Candida krusei (5 isolates), Candida tropicalis (2 isolates), Kluyveromyces marxianus (3 isolates) and Rhodotorula mucilaginosa (1 isolate). Surface hydrophobicity was measured by the microbial adhesion to solvents method. Yeast cells and surfaces were incubated in apple juice and temporal measurements of the numbers of adherent cells were made. Ten isolates showed moderate to high hydrophobicity and 1 strain was hydrophilic. The hydrophobicity expressed by the yeast surfaces correlated positively with the rate of adhesion of each strain. These results indicated that cell surface hydrophobicity governs the initial attachment of the studied yeast strains to SS surfaces common to apple juice processing plants.