DNA sequence of the transposable element IS1

Summary The nucleotide sequence of an IS1 element recently transposed into the lacI gene is reported. This sequence is nearly identical to one previously reported for another IS1 element (Ohtsubo and Ohtsubo, 1978). The implications of this similarity are discussed. The sizes of potential polypeptides encoded in the IS1 DNA have been determined and possible roles for these peptides in the illegitimate recombination events mediated by the element are considered.     

Interactions between the transposable element IS21 on R68.45 and TN7 in Pseudomonas aeruginosa PAO

Tn7 transposes from the chromosome of Pseudomonas aeruginosa into the plasmid R68.45 with tandem IS21, at up to 400 times the frequency that it transposes into R68, which has only one copy of IS21. While R68::TN7 derivatives are stable, R68.45::Tn7 isolates undergo frequent deletions. Instability of R68.45 occurs whether Tn7 is inserted into the plasmid (cis configuration) or into the bacterial chromosome (trans configuration). The deletions of R68.45 start at the junction between the tandem IS21 copies and proceed clockwise, ending in the region of oriT. It appears that Tn7 and IS21 can mutually stimulate transposition of each other.     

Isolation and characterization of IS 31831, a transposable element from Corynebacterium glutamicum

A transposable element from a coryneform bacterium, Corynebacterium glutamicum ATCC 31831 was isolated and characterized. The element IS 31831 is a 1453 bp insertion sequence with 24 bp imperfect terminal inverted repeats. It contains one open reading frame highly homologous at the amino acid level to the transposase of IS 1096 from Mycobacterium smeg-matis. Both IS 31831 and IS 1096 exhibit several common characteristics suggesting that they constitute a new family of insertion sequences. IS 31831 was isolated by taking advantage of the sucrose sensitivity of coryneform bacteria conferred by expression of the Bacillus subtilis sacB gene. An Escherichia coli/ Corynebacterium shuttle vector useful for the isolation of transposable elements from the coryneform group of bacteria was constructed.     

The nucleotide sequence and protein-coding capability of the transposable element IS5

The nucleotide sequence of IS5, a bacterial insertion sequence, has been determined. It is 1195 bp long and contains an inverted terminal repetition of 16 bp with one mismatch. One open reading frame, spanning nearly the entire length of the element, could encode a polypeptide of 338 amino acids. Upon insertion into a DNA segment, IS5 causes a duplication of 4 bp. Based on seven examples, this site of insertion appears to be nonrandom, and the consensus target site sequence is C . T/A . A . G/A (or C/T . T . A/T . G on the opposite strand). The nucleotide sequences of IS5 insertions into the B and cim genes of bacteriophage Mu have allowed tentative identification of the protein-coding frames of B and cim.     

A transcriptional terminator sequence in the prokaryotic transposable element IS1

The prokaryotic transposable element IS1 is known to exert a strong polar effect upon integration into an operon. To elucidate this polar effect, we constructed a plasmid which has an IS1 integrated between the 5' half of the tet gene for tetracycline resistance and the cat structural gene for chloramphenicol resistance. The cat gene is expressed by the tet promoter and the presence of IS1 in orientation I, in which the IS1 transposase genes insA and insB are in the same orientation as the cat gene, reduced the cat expression. By introducing deletions or insertions within the IS1 sequence, we were able to map a rho-dependent terminator TIS1A between the insA and insB genes. Translational interruption between these ins genes is important for TIS1A to be an active terminator.     

Identification and characterization of IS 1138, a transposable element from Mycoplasma pulmonis that belongs to the IS3 family

Insertion sequence (IS) elements are mobile genetic elements found in prokaryotes. We have identified a repetitive element from Mycoplasma pulmonis, a murine pathogen, that is similar to eubacterial IS elements. By subcloning a single strain of M. pulmonis, we isolated a variant clone in which the IS element had undergone an apparent transposition event. The nucleotide sequences of the element, designated IS 1138, and the target site into which it inserted were determined. IS1138 consists of 1288bp with 18bp perfect terminal inverted repeats. Sequence analysis of the target site before and after insertion of IS1138 identified a 3bp duplication of target DNA flanking the element. The predicted amino acids encoded by the major open reading frame of IS 1138 share significant similarity with the transposases of the IS3 family. Southern hybridization analysis indicates that repetitive sequences similar to IS 1138 are present in most, if not all, strains of M. pulmonis, but Is1138–like sequences were not detected in other mycoplasmal species.     

Specificity and regulation of the mutator transposable element system in maize

The Mutator transposable element system is exceptional in many of its basic attributes. The high frequency and low specificity of mutant induction are both unusual and useful characteristics of the Mutator system. Other basic features are at least equally fascinating: the existence of multiple Mu element subfamilies with apparently unrelated internal sequences; the lack of correlation between Mu element transposition and excision; the complex inheritance of Mutator activity; the tight developmental regulation of Afufaror‐conditioned events; and the coordinated processes of element modification/inactivation, to name a few.

Molecular and genetic studies over the last 10 years have begun to explain many of these interesting properties and have uncovered new mysteries of Mutator biology. Both positive and negative regulators of the system have been identified and characterized to varying degrees. Insertion specificity has been observed at several levels. Recent accomplishments include the isolation of an autonomous Mu element and the discovery of maize lines with altered developmental regulation of Mutator‐derived mutability. This review defines the Mutator system, describes the status of current experimentation in the Mutator field, proposes models that may explain some aspects of Mutator behavior, and details future studies that will help elucidate the nature of the Mutator phenomenon.     

The Sleeping Beauty transposable element: evolution, regulation and genetic applications

Members of the Tc1/mariner superfamily of transposable elements isolated from vertebrate species are inactive due to the accumulation of mutations. A representative of a subfamily of fish elements estimated to be last active > 10 million years ago has been reconstructed, and named Sleeping Beauty(SB). This element opened up new avenues for studies on DNA transposition in vertebrates, and for the development of transposon tools for genetic manipulation in important model species and in humans. Multiple transposase binding sites within the terminal inverted repeats, a transpositional enhancer sequence, unequal affinity of the transposase to the binding sites and the activity of the cellular HMGB1 protein all contribute to a highly regulated assembly of SB synaptic complexes, which is likely a requirement for the subsequent catalytic steps. Host proteins involved in double-strand DNA break repair are limiting factors of SB transposition in mammalian cells, underscoring evolutionary, structural and functional links between DNA transposition, retroviral integration and V(D)J recombination. SB catalyzes efficient cut-and-paste transposition in a wide range of vertebrate cells in tissue culture, and in somatic tissues as well as the germline of the mouse and zebrafish in vivo, indicating its usefulness as a vector for transgenesis and insertional mutagenesis.     

Transposition of the IS21-related element IS1415 in Rhodococcus erythropolis.

Three copies of the IS21-related transposable element IS1415 were identified in Rhodococcus erythropolis NI86/21. Adjacent to one of the IS1415 copies, a 47-bp sequence nearly identical to the conserved 5' end of integrons was found. Accurate transposition of IS1415 carrying a chloramphenicol resistance gene (Tn5561) was demonstrated following delivery from a suicide vector to R. erythropolis SQ1.     

Genetic characterisation of Act1, the activator of a non-autonomous transposable element from Petunia hybrida

The line W138 of Petunia hybrida has variegated flowers because it is homozygous for the mutable an1-W138 allele. Excision of the element, causing instability, depends on the presence of the activatorAct1. The previously characterised non-autonomous element dTph1 excises from the dfrC gene in response to Act1. This implies that both non-autonomous elements belong to the same transposable element family. In a range of distantly related cultivars we could detect a single functional Act1 element. Linkage analysis for 11 of these lines showed that Act1 was located on chromosome I in all cases, indicating that the element might be fixed in the genome. A group of cultivars that did not exhibit Act1 activity could be traced back to a recent common origin (Rose of Heaven). Cultivars within this group presumably harbour the same inactivated Act1 element. Among the lines tested were 7 lines representing the two species (P. axillaris and P. integrifolia) from which P. hybrida originated. None of these exhibited Act1 activity. We assume that Act1 is present in an inactive state in these lines and that it was activated upon interspecific crossing. In general, lines representing the two parental species and P. hybrida cultivars contain between 5 and 25 dTph1 elements. The lines R27 and W138, however, contain significantly more dTph1 elements (> 50) than all other lines.     

Homogeneity in the structure of the medaka fish transposable element Tol2

The hAT family is a group of transposable elements of the terminal inverted repeat class, which includes Ac of maize, hobo of Drosophila and Tam3 of Antirrhinum (snapdragon). All the members of this family so far examined are known to comprise complete and defective copies, with a good correspondence to autonomous and non-autonomous elements, respectively. Internal deletion is the most common cause of defective copies. Tol2, a transposable element of the medaka fish Oryzias latipes, is a member of the hAT family. We examined, mainly by the genomic Southern blot analysis, variation in the structure of copies of this element, and revealed that there are few or no internally deleted copies. This situation is unusual in a member of the hAT family. Possible causes of this anomaly are discussed.     

Topi, an IS630/Tc1/mariner-type transposable element in the African malaria mosquito, Anopheles gambiae

IS630/Tc1/mariner elements are diverse and widespread within insects. The African malaria mosquito, Anopheles gambiae, contains over 30 families of IS630/Tc1/mariner elements although few have been studied in any detail. To examine the history of Topi elements in An. gambiae populations, Topi elements (n=73) were sampled from five distinct populations of An. gambiae from eastern and western Africa and evaluated with respect to copy number, nucleotide diversity and insertion site-occupancy frequency. Topi 1 and 2 elements were abundant (10-34 per diploid genome) and highly diverse (pi=0.051). Elements from mosquitoes collected in Nigeria were Topi 2 elements and those from mosquitoes collected in Mozambique were Topi 1 elements. Of the 49 Topi transposase open reading frames sequenced none were found to be identical. Intact elements with complete transposase open reading frames were common, although based on insertion site-occupancy frequency data it appeared that genetic drift was the major force acting on these IS630/Tc1/mariner-type elements. Topi 3 elements were not recovered from any of the populations sampled in this study and appear to be rare elements in An. gambiae, possibly due to a recent introduction.     

Physical and genetic analysis of IS110, a transposable element of Streptomyces coelicolor A3(2)

Summary On at least three independent occasions a 1.6 kb segment of Streptomyces coelicolor DNA was detected in apparently the same location in an attP-deleted derivative of the temperature phage C31 that carried a selectable viomycin resistance gene. This sequence (termed IS110) allowed integration of the phage (giving viomycin-resistant transductants) at homologous sequences (detected by Southern hybridisation) at several locations in the S. coelicolor genome. The inserted prophages facilitated genetic mapping of two IS110 copies in the chromosomal linkage map. A third copy did not exhibit simple segregation with chromosomal markers, and there appeared to be a frequent DNA rearrangement close to this copy. Some variation in the number of copies of IS110 and their location has taken place in the pedigree of S. coelicolor derivatives. IS110 did not hybridise to any known S. coelicolor plasmid, nor to any of several other IS-like elements previously described in other Streptomyces plasmids or phages. It hybridised strongly to DNA from only a small minority of other Streptomyces species and was absent from S. lividans, a close relative of S. coelicolor.     

Chloramphenicol resistance transposable element TnSs1 of Streptococcus suis,a transposon flanked by IS6-family elements

A new transposon, designated TnSs1, which contains a chloramphenicol acetyltransferase gene flanked by direct repeats of an IS6-family element was found in a field isolate of Streptococcus suis. Polymerase chain reaction and hybridization analyses indicated that another field isolate carried the same transposon in a different location on the chromosome. A transposition assay done with a thermosensitive suicide vector showed that, among the seven TnSs1 mutants tested in this study, six formed a cointegrate between the S. suis genome and the vector with the generation of the third copy of the insertion sequence element, and one harbored one copy of TnSs1 on the chromosome as a result of a subsequent resolution step. On transposition, TnSs1 duplicated an 8-bp sequence at the target site.     

Guanylyl cyclase structure, function and regulation

Nitric oxide, bicarbonate, natriuretic peptides (ANP, BNP and CNP), guanylins, uroguanylins and guanylyl cyclase activating proteins (GCAPs) activate a family of enzymes variously called guanyl, guanylyl or guanylate cyclases that catalyze the conversion of guanosine triphosphate to cyclic guanosine monophosphate (cGMP) and pyrophosphate. Intracellular cyclic GMP is a second messenger that modulates: platelet aggregation, neurotransmission, sexual arousal, gut peristalsis, blood pressure, long bone growth, intestinal fluid secretion, lipolysis, phototransduction, cardiac hypertrophy and oocyte maturation. This review briefly discusses the discovery of cGMP and guanylyl cyclases, then nitric oxide, nitric oxide synthase and soluble guanylyl cyclase are described in slightly greater detail. Finally, the structure, function, and regulation of the individual mammalian single membrane-spanning guanylyl cyclases GC-A, GC-B, GC-C, GC-D, GC-E, GC-F and GC-G are described in greatest detail as determined by biochemical, cell biological and gene-deletion studies.