Growth and metabolism characteristics of anaerobic ammonium-oxidizing bacteria aggregates

The present study reported the growth and metabolism characteristics of anaerobic ammonium-oxidizing (anammox) bacteria aggregates in an expanded granular sludge bed (EGSB). The results showed that the anammox bacteria aggregates presented starvation, growth, and inhibition phase along with the increase of substrate supply. The substrate conversion rates for survival were 0.05 kgNH ₄ ⁺ –N/(kgVSS·day), 0.07 kgNO ₂ ^? –N/(kgVSS·day), and 0.12 kgN/(kgVSS·day); the substrate conversion rates for maximum growth were 0.21 kgNH ₄ ⁺ –N/(kgVSS·day), 0.24 kgNH ₄ ⁺ –N/(kgVSS·day), and 0.45 kgNH ₄ ⁺ –N/(kgVSS·day), respectively. In the growth phase, the yield of anammox bacteria aggregates was 0.14 gVSS/(gNH ₄ ⁺ –N), 0.12 gVSS/(gNO ₂ ^? –N), and 0.70 gVSS/(gNO ₃ ^? –N); the yield of extracellular polymeric substances (EPS) was 0.11 gEPS/(gNH ₄ ⁺ –N), 0.09 gEPS/(gNO ₂ ^? –N), and 0.55 gEPS/(gNO ₃ ^? –N), respectively. The EPS contents in anammox bacteria aggregates were high compared to that in anaerobic granular sludge. Speculated from the cell yield, the energy for anammox bacteria growth was not only from nitrite oxidation, but also from anammox reaction.     

l-Carnitine Exposure and Mitochondrial Function in Human Neuronal Cells

l-Carnitine is a naturally occurring substance required in mammalian energy metabolism that functions by facilitating long-chain fatty acid entry into cellular mitochondria, thereby delivering substrate for oxidation and subsequent energy production. It has been purposed that l-carnitine may improve and preserve cognitive performance, and may lead to better cognitive aging through the life span, and several controlled human clinical trials with l-carnitine support the hypothesis that this substance has the ability to improve cognitive function. We further hypothesized that, since l-carnitine is an important co-factor of mammalian mitochondrial energy metabolism, acute administration of l-carnitine to human tissue culture cells should result in detectable increases in mitochondrial function. Cultures of SH-SY-5Y human neuroblastoma and 1321N1 human astrocytoma cells grown in 96-well cell culture plates were acutely administered l-carnitine hydrochloride, and then, mitochondrial function was assayed using the colorimetric 2,3-bis[2-methoxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxyanilide inner salt cell assay kit in a VERSA_max tunable microplate reader. Significant increases in mitochondrial function were observed when human neuroblastoma or human astrocytoma cells were exposed to 100 nM (20 μg l-carnitine hydrochloride/L) to 100 μM (20 mg l-carnitine hydrochloride/L) concentrations of l-carnitine hydrochloride in comparison to unexposed cells, whereas no significant positive effects were observed at lower or higher concentrations of l-carnitine hydrochloride. The results of the present study provide insights for how l-carnitine therapy may significantly improve human neuronal function, but we recommend that future studies further explore different derivatives of l-carnitine compounds in different in vitro cell-based systems using different markers of mitochondrial function.     

A thermomechanical framework for reconciling the effects of ultraviolet radiation exposure time and wavelength on connective tissue elasticity

Augmentation of the mechanical properties of connective tissue using ultraviolet (UV) radiation—by targeting collagen cross-linking in the tissue at predetermined UV exposure time \((t)\) and wavelength \((\lambda )\) —has been proposed as a therapeutic method for supporting the treatment for structural-related injuries and pathologies. However, the effects of \(\lambda \) and \(t\) on the tissue elasticity, namely elastic modulus \((E)\) and modulus of resilience \((u_\mathrm{Y})\) , are not entirely clear. We present a thermomechanical framework to reconcile the \(t\) - and \(\lambda \) -related effects on \(E\) and \(u_\mathrm{Y}\) . The framework addresses (1) an energy transfer model to describe the dependence of the absorbed UV photon energy, \(\xi \) , per unit mass of the tissue on \(t\) and \(\lambda \) , (2) an intervening thermodynamic shear-related parameter, \(G\) , to quantify the extent of UV-induced cross-linking in the tissue, (3) a threshold model for the \(G\) versus \(\xi \) relationship, characterized by   \(t_\mathrm{C}\) —the critical \(t\) underpinning the association of \(\xi \) with \(G\) —and (4) the role of \(G\) in the tissue elasticity. We hypothesized that \(G\) regulates \(E\) (UV-stiffening hypothesis) and \(u_\mathrm{Y}\) (UV-resilience hypothesis). The framework was evaluated with the support from data derived from tensile testing on isolated ligament fascicles, treated with two levels of \(\lambda \) (365 and 254 nm) and three levels of \(t\) (15, 30 and 60 min). Predictions from the energy transfer model corroborated the findings from a two-factor analysis of variance of the effects of \(t\) and \(\lambda \) treatments. Student’s t test revealed positive change in \(E\) and \(u_\mathrm{Y}\) with increases in \(G\) —the findings lend support to the hypotheses, implicating the implicit dependence of UV-induced cross-links on \(t\) and \(\lambda \) for directing tissue stiffness and resilience. From a practical perspective, the study is a step in the direction to establish a UV irradiation treatment protocol for effective control of exogenous cross-linking in connective tissues.     

High-level extracellular production of d-Psicose-3-epimerase with recombinant Escherichia coli by a two-stage glycerol feeding approach

The aim of this study is to achieve high-level extracellular production of d-Psicose-3-epimerase (DPE) with recombinant Escherichia coli. High-level production of DPE is one of the key factors in d-Psicose production. In the present study, the gene AAL45544.1 from Agrobacterium tumefaciens str. C58 was modified by artificial synthesis for overexpression in E. coli. The total DPE activity reached 3.96 U mL^?1 after optimization of the media composition, induction temperature, and concentration of inducer. Furthermore, it was found that addition of glycine had a positive effect on the extracellular production of DPE, which reached 3.5 U mL^?1. Finally, a two-stage glycerol feeding strategy based on both the specific growth rate before induction and the amount of glycerol residues after induction was applied in a 3-L fermenter. After a series of optimal strategies in the 3-L fermenter, the total and extracellular DPE activity were 5.08- and 3.11-fold higher than that noted in the shake flask. The extracellular and intracellular DPE activity reached 10.9 and 13.2 U mL^?1, achieving 25.5 and 31.1 % conversion of d-fructose to d-psicose, respectively. The systemic strategies presented in this study provide valuable novel information for the industrial application of DPE.     

Basic Features of a Cell Electroporation Model: Illustrative Behavior for Two Very Different Pulses

Science increasingly involves complex modeling. Here we describe a model for cell electroporation in which membrane properties are dynamically modified by poration. Spatial scales range from cell membrane thickness (5 nm) to a typical mammalian cell radius (10  \(\upmu\) m), and can be used with idealized and experimental pulse waveforms. The model consists of traditional passive components and additional active components representing nonequilibrium processes. Model responses include measurable quantities: transmembrane voltage, membrane electrical conductance, and solute transport rates and amounts for the representative “long” and “short” pulses. The long pulse—1.5 kV/cm, 100  \(\upmu\) s—evolves two pore subpopulations with a valley at \({\sim}\) 5 nm, which separates the subpopulations that have peaks at \({\sim}\) 1.5 and \({\sim}\) 12 nm radius. Such pulses are widely used in biological research, biotechnology, and medicine, including cancer therapy by drug delivery and nonthermal physical tumor ablation by causing necrosis. The short pulse—40 kV/cm, 10 ns—creates 80-fold more pores, all small ( \(<\) 3 nm; \(\sim\) 1 nm peak). These nanosecond pulses ablate tumors by apoptosis. We demonstrate the model’s responses by illustrative electrical and poration behavior, and transport of calcein and propidium. We then identify extensions for expanding modeling capability. Structure-function results from MD can allow extrapolations that bring response specificity to cell membranes based on their lipid composition. After a pulse, changes in pore energy landscape can be included over seconds to minutes, by mechanisms such as cell swelling and pulse-induced chemical reactions that slowly alter pore behavior.     

Vascular deposition patterns for nanoparticles in an inflamed patient-specific arterial tree

Inflammation, a precursor to many diseases including cancer and atherosclerosis, induces differential surface expression of specific vascular molecules. Blood-borne nanoparticles (NPs), loaded with therapeutic and imaging agents, can recognize and use these molecules as vascular docking sites. Here, a computational model is developed within the isogeometric analysis framework to understand and predict the vascular deposition of NPs within an inflamed arterial tree. The NPs have a diameter ranging from 0.1 to $2.0\,\upmu $ m and are decorated with antibodies directed toward three endothelial adhesion molecules, namely intravascular cell adhesion molecule-1 (ICAM-1), vascular cell adhesion molecule-1 (VCAM-1), and E-selectin, whose surface density depends on the local wall shear stress. Results indicate VCAM-1 targeted NPs adhere more, with ICAM-1 directed NPs adhering least efficiently, resulting in approximately an order-of-magnitude lower average particle surface density. ICAM-1 and E-selectin directed $0.5\,\upmu $ m NPs are distributed more uniformly (heterogeneity index $\approx $  0.9 and 1.0, respectively) over the bifurcating vascular branches compared to their VCAM-1 counterparts (heterogeneity index $\approx $  1.4). When the NPs are coated with antibodies for VCAM-1 and E-selectin in equal proportions, a more uniform vascular distribution is achieved compared with VCAM-1-only targeted particles, thus demonstrating the advantage of NP multivalency in vascular targeting. Furthermore, the larger NPs ( $2\,\upmu $ m) adhere more ( $\approx $  200 %) in the lower branches compared to the upper branch. This computational framework provides insights into how size, ligand type, density, and multivalency can be manipulated to enhance NP vascular adhesion in an individual patient.     

Simulation of extracellular matrix remodeling by fibroblast cells in soft three-dimensional bioresorbable scaffolds

To culture functional soft tissues and organs in three-dimensional scaffolds, it is essential to elucidate the optimal scaffold mechanical properties. However, mechanoregulated soft tissue remodeling is not well understood. In this study, we hypothesized that individual cells are capable of remodeling extracellular matrix within a short proximity of themselves in order to match the stiffness of the broader surrounding matrix. This theory was implemented in a three-dimensional finite element model to simulate soft tissue remodeling of human fibroblast cells in two collagen–chitosan scaffolds with different mechanical properties. Simulation results closely matched with previously reported experimental data, showing that soft tissue growth in compliant (Scaf-A, 4.30 kPa) and stiff (Scaf-B, 17.03 kPa) scaffolds led to an almost eightfold difference in the resulting stiffnesses after 10 days (8.40 kPa for Scaf-A, 59.25 kPa for Scaf-B). Furthermore, varying the simulated rate for tissue remodeling by \(\pm \)50 % caused unequal changes in the resulting stiffness (+3.6 and \(-\)23 % for Scaf-A, +5 and \(-\)17 % for Scaf-B), and \(\pm \)50 % changes in the assumed upper limit on tissue stiffness only had larger effects on the stiff scaffold (+42 and \(-\)44 % for Scaf-B). These results reinforce the notion that soft tissue remodeling is governed by the stiffness of the surrounding matrix, until meeting an upper limit on tissue stiffness.     

Nitric Oxide Donors Augment Interleukin-1β-Induced Vascular Endothelial Growth Factor in Airway Smooth Muscle Cells

Angiogenesis and microvascular leakage are features of chronic inflammatory diseases of which molecular mechanisms are poorly understood. We investigated the effects of interleukin-1β (IL-1β) on the expression and secretion of vascular endothelial growth factor (VEGF) and placenta growth factor (PlGF) in porcine airway smooth muscle cells (PASMC) in relation to a nitric oxide (NO) pathway. Serum-deprived (48 h) PASMC were stimulated with IL-1β alone or with NO donor, l-arginine and/or NO synthase inhibitor l-NAME for 4 and 24 h. IL-1β did not affect PlGF release, but augmented VEGF release (2.4-fold) after 24 h. VEGF release was inhibited by l-NAME (531.8 ± 52 pg/ml), but restored and further elevated by l-arginine (1,529 ± 287 pg/ml). IL-1β up-regulated VEGF mRNA (1.8-fold) and this response was attenuated by l-NAME (1.1-fold) and augmented by l-arginine (3.8-fold) at 4 h. Restoration of a NO pathway by l-arginine in l-NAME-treated cells resulted in elevated VEGF mRNA levels (2.2-fold). [³H]Thymidine incorporation assay revealed enhanced porcine pulmonary artery endothelial cell proliferation in response to IL-1β, VEGF and PlGF, and this mitogenic effect was not influenced via the NO pathway. Our results suggest that a NO pathway modulates VEGF synthesis during inflammation contributing to bronchial angiogenesis and vascular leakage.     

Detection of d-amino acids in purified proteins synthesized in Escherichia coli

It has long been believed that amino acids comprising proteins of all living organisms are only of the l-configuration, except for Gly. However, peptidyl d-amino acids were observed in hydrolysates of soluble high molecular weight fractions extracted from cells or tissues of various organisms. This strongly suggests that significant amounts of d-amino acids are naturally present in usual proteins. Thus we analyzed the d-amino acid contents of His-tag-purified β-galactosidase and human urocortin, which were synthesized by Escherichia coli grown in controlled synthetic media. After acidic hydrolysis for various times at 110°C, samples were derivatized with 4-fluoro-7-nitro-2, 1, 3-benzoxadiazole (NBD-F) and separated on a reverse-phase column followed by a chiral column into d- and l-enantiomers. The contents of d-enantiomers of Ala, Leu, Phe, Val, Asp, and Glu were determined by plotting index d/(d + l) against the incubation time for hydrolysis and extrapolating the linear regression line to 0 h to eliminate the effect of racemization of amino acids during the incubation. Significant contents of d-amino acids were reproducibly detected, the d-amino acid profile being specific to an individual protein. This finding indicated the likelihood that d-amino acids are in fact present in the purified proteins. On the other hand, the d-amino acid contents of proteins were hardly influenced by the addition of d- or l-amino acids to the cultivation medium, whereas intracellular free d-amino acids sensitively varied according to the extracellular conditions. The origin of these d-amino acids detected in proteins was discussed.     

Construction of an l-serine producing Escherichia coli via metabolic engineering

l-Serine is a nonessential amino acid, but plays a crucial role as a building block for cell growth. Currently, l-serine production is mainly dependent on enzymatic or cellular conversion. In this study, we constructed a recombinant Escherichia coli that can fermentatively produce l-serine from glucose. To accumulate l-serine, sdaA encoding the l-serine dehydratase, iclR encoding the isocitrate lyase regulator, and arcA encoding the aerobic respiration control protein were deleted in turn. In batch fermentation, the engineered E. coli strain YF-5 exhibited obvious l-serine accumulation but poor cell growth. To restore cell growth, aceB encoding the malate synthase was knocked out, and the engineered strain was then transformed with plasmid that overexpressed serA ^FR , serB, and serC genes. The resulting strain YF-7 produced 4.5 g/L l-serine in batch cultivation and 8.34 g/L l-serine in fed-batch cultivation.     

Backbone and side-chain 1H, 15N and 13C assignment of apo- and imipenem-acylated l,d-transpeptidase from Bacillus subtilis

The d,d-transpeptidase activity of Penicillin Binding Proteins (PBPs) is essential to maintain cell wall integrity. PBPs catalyze the final step of the peptidoglycan synthesis by forming 4 → 3 cross-links between two peptide stems. Recently, a novel β-lactam resistance mechanism involving l,d-transpeptidases has been identified in Enterococcus faecium and Mycobacterium tuberculosis. In this resistance pathway, the classical 4 → 3 cross-links are replaced by 3 → 3 cross-links, whose formation are catalyzed by the l,d-transpeptidases. To date, only one class of the entire β-lactam family, the carbapenems, is able to inhibit the l,d-transpeptidase activity. Nevertheless, the specificity of this inactivation is still not understood. Hence, the study of this new transpeptidase family is of considerable interest in order to understand the mechanism of the l,d-transpeptidases inhibition by carbapenems. In this context, we present herein the backbone and side-chain ¹H, ¹⁵N and ¹³C NMR assignment of the l,d-transpeptidase from Bacillus subtilis (Ldt_Bs) in the apo and in the acylated form with a carbapenem, the imipenem.     

Metabolic engineering Corynebacterium glutamicum for the l-lysine production by increasing the flux into l-lysine biosynthetic pathway

The experiments presented here were based on the conclusions of our previous results. In order to avoid introduction of expression plasmid and to balance the NADH/NAD ratio, the NADH biosynthetic enzyme, i.e., NAD-dependent glyceraldehyde-3-phosphate dehydrogenase (GADPH), was replaced by NADP-dependent GADPH, which was used to biosynthesize NADPH rather than NADH. The results indicated that the NADH/NAD ratio significantly decreased, and glucose consumption and l-lysine production drastically improved. Moreover, increasing the flux through l-lysine biosynthetic pathway and disruption of ilvN and hom, which involve in the branched amino acid and l-methionine biosynthesis, further improved l-lysine production by Corynebacterium glutamicum. Compared to the original strain C. glutamicum Lys5, the l-lysine production and glucose conversion efficiency (α) were enhanced to 81.0 ± 6.59 mM and 36.45 % by the resulting strain C. glutamicum Lys5-8 in shake flask. In addition, the by-products (i.e., l-threonine, l-methionine and l-valine) were significantly decreased as results of genetic modification in homoserine dehydrogenase (HSD) and acetohydroxyacid synthase (AHAS). In fed-batch fermentation, C. glutamicum Lys5-8 began to produce l-lysine at post-exponential growth phase and continuously increased over 36 h to a final titer of 896 ± 33.41 mM. The l-lysine productivity was 2.73 g l^?1 h^?1 and the α was 47.06 % after 48 h. However, the attenuation of MurE was not beneficial to increase the l-lysine production because of decreasing the cell growth. Based on the above-mentioned results, we get the following conclusions: cofactor NADPH, precursor, the flux through l-lysine biosynthetic pathway and DCW are beneficial to improve l-lysine production in C. glutamicum.     

Optimization of Biotransformation of l-Tyrosine to l-DOPA by Yarrowia lipolytica-NCIM 3472 Using Response Surface Methodology

l-DOPA (3,4-dihydroxyphenyl-l-alanine) is the most widely used drug for treatment of Parkinson’s disease. In this study Yarrowia lipolytica-NCIM 3472 biomass was used for transformation of l-tyrosine to l-DOPA. The process parameters were optimized using response surface methodology (RSM). The optimum values of the tested variables for the production of l-DOPA were: pH 7.31, temperature 42.9 °C, 2.31 g l^?1 cell mass and 1.488 g l^?1 l-tyrosine. The highest yield obtained with these optimum parameters along with recycling of the cells was 4.091 g l^?1. This optimization of process parameters using RSM resulted in 4.609-fold increase in the l-DOPA production. The statistical analysis showed that the model was significant. Also coefficient of determination (R²) was 0.9758, indicating a good agreement between the experimental and predicted values of l-DOPA production. The highest tyrosinase activity observed was 7,028 U mg^?1 tyrosine. l-DOPA production was confirmed by HPTLC and HPLC analysis. Thus, RSM approach effectively enhanced the potential of Y. lipolytica-NCIM 3472 as an alternative source to produce l-DOPA.     

Integrating qPLM and biomechanical test data with an anisotropic fiber distribution model and predictions of TGF-\upbeta 1 and IGF-1 regulation of articular cartilage fiber modulus

A continuum mixture model with distinct collagen (COL) and glycosaminoglycan elastic constituents was developed for the solid matrix of immature bovine articular cartilage. A continuous COL fiber volume fraction distribution function and a true COL fiber elastic modulus ( $E^\mathrm{f})$ were used. Quantitative polarized light microscopy (qPLM) methods were developed to account for the relatively high cell density of immature articular cartilage and used with a novel algorithm that constructs a 3D distribution function from 2D qPLM data. For specimens untreated and cultured in vitro, most model parameters were specified from qPLM analysis and biochemical assay results; consequently, $E^\mathrm{f}$ was predicted using an optimization to measured mechanical properties in uniaxial tension and unconfined compression. Analysis of qPLM data revealed a highly anisotropic fiber distribution, with principal fiber orientation parallel to the surface layer. For untreated samples, predicted $E^\mathrm{f}$ values were 175 and 422 MPa for superficial (S) and middle (M) zone layers, respectively. TGF- $\upbeta $ 1 treatment was predicted to increase and decrease $E^\mathrm{f}$ values for the S and M layers to 281 and 309 MPa, respectively. IGF-1 treatment was predicted to decrease $E^\mathrm{f}$ values for the S and M layers to 22 and 26 MPa, respectively. A novel finding was that distinct native depth-dependent fiber modulus properties were modulated to nearly homogeneous values by TGF- $\upbeta $ 1 and IGF-1 treatments, with modulated values strongly dependent on treatment.     

New insights into vegetation dynamics and settlement history in Hümmling,north-western Germany,with particular reference to the Neolithic

Palynological investigations on two well-dated peat profiles provide insights into Neolithic vegetation and settlement history from Hümmling in north-western Germany. The site selections allow comparisons between local and regional vegetation changes and are used to estimate the extent of Neolithic influence on the vegetation. The interpretation of the fossil spectra relied on radiocarbon dating, evaluation of pollen indicator taxa, non-pollen palynomorphs and multivariate techniques. During the late Mesolithic the vegetation was dominated by mixed oak forests while openings in forest cover were detected, with a decline in elm reflected in the regional pollen record around 4250 cal. b.c. The presence of humans is shown by settlement indicators that are first recorded at ca. 3800 cal. b.c. Vegetation changes were small between 4300 and 3600 cal. b.c. This suggests that regional vegetation was relatively resilient to small-scale disturbances. Possible indications of grazing were recorded in the spectra of the local pollen profile but there is no clear-cut evidence for Neolithic activity. Between 3520 and 2260 cal. b.c. decreases in forest cover were inferred from both profiles and increases in settlement indicators reflect farming activity. These changes coincide with the emergence in the area of the Funnel Beaker Culture and the subsequent Single Grave Culture. Both profiles suggest that settlement probably ceased between ca. 3230 and 3050 cal. b.c. This lull or cessation in activity was probably regional in character. After 2260 cal. b.c. human impact on the vegetation decreases and woodlands regenerate. The longevity of the regeneration phase—ca. 690 years—was probably connected with the low resilient capability of the vegetation on the poor soils.     

Effects of d-Amino Acids on the EPS Production and Cell Aggregation of Alteromonas macleodii Strain JL2069

Exopolysaccharide (EPS) is produced by many marine bacteria and is important for cell aggregation in the ocean. d-amino acids are important components in bacteria and are recently recognized as signal molecules for regulation of bacterial growth. In this study, the effects of d-amino acids on EPS production, cell aggregation, and metabolic activity were investigated using an EPS-producing bacterium Alteromonas macleodii strain JL2069. EPS produced by JL2069 was inhibited by 1 mM of d-Ala and d-Ser, but not by d-Glu. The formation of particulate organic matter (POM) was promoted by the three amino acids. A new technique of microcalorimetry analysis indicated that the metabolic activity of the JL2069 cells was inhibited by these d-amino acids. Our results suggested that d-amino acids may reduce the bacterial metabolism by changing bacterial lifestyle from planktonic to cell aggregation growth which occurs independent of the production of EPS.     

Selenium Modulates Oxidative Stress-Induced Cell Apoptosis in Human Myeloid HL-60 Cells Through Regulation of Calcium Release and Caspase-3 and -9 Activities

Selenium is an essential chemopreventive antioxidant element to oxidative stress, although high concentrations of selenium induce toxic and oxidative effects on the human body. However, the mechanisms behind these effects remain elusive. We investigated toxic effects of different selenium concentrations in human promyelocytic leukemia HL-60 cells by evaluating Ca²⁺ mobilization, cell viability and caspase-3 and -9 activities at different sample times. We found the toxic concentration and toxic time of H₂O₂ as 100 μm and 10 h on cell viability in the cells using four different concentrations of H₂O₂ (1 μm–1 mm) and six different incubation times (30 min, 1, 2, 5, 10, 24 h). Then, we found the therapeutic concentration of selenium to be 200 nm by cells incubated in eight different concentrations of selenium (10 nm–1 mm) for 1 h. We measured Ca²⁺ release, cell viability and caspase-3 and -9 activities in cells incubated with high and low selenium concentrations at 30 min and 1, 2, 5, 10 and 24 h. Selenium (200 nm) elicited mild endoplasmic reticulum stress and mediated cell survival by modulating Ca²⁺ release, the caspases and cell apoptosis, whereas selenium concentrations as high as 1 mm induced severe endoplasmic reticulum stress and caused cell death by activating modulating Ca²⁺ release, the caspases and cell apoptosis. In conclusion, these results explained the molecular mechanisms of the chemoprotective effect of different concentrations of selenium on oxidative stress-induced apoptosis.     

Metabolic engineering of Escherichia coli for biosynthesis of d-galactonate

d-galactose is an attractive substrate for bioconversion. Herein, Escherichia coli was metabolically engineered to convert d-galactose into d-galactonate, a valuable compound in the polymer and cosmetic industries. d-galactonate productions by engineered E. coli strains were observed in shake flask cultivations containing 2 g L^?1 d-galactose. Engineered E. coli expressing gld coding for galactose dehydrogenase from Pseudomonas syringae was able to produce 0.17 g L^?1 d-galactonate. Inherent metabolic pathways for assimilating both d-galactose and d-galactonate were blocked to enhance the production of d-galactonate. This approach finally led to a 7.3-fold increase with d-galactonate concentration of 1.24 g L^?1 and yield of 62.0 %. Batch fermentation in 20 g L^?1 d-galactose of E. coli ?galK?dgoK mutant expressing the gld resulted in 17.6 g L^?1 of d-galactonate accumulation and highest yield of 88.1 %. Metabolic engineering strategy developed in this study could be useful for industrial production of d-galactonate.     

Characterization of a recombinant l-fucose isomerase from Caldicellulosiruptor saccharolyticus that isomerizes l-fucose, d-arabinose, d-altrose, and l-galactose

A recombinant l-fucose isomerase from Caldicellulosiruptor saccharolyticus was purified as a single 68 kDa band with an activity of 76 U mg^?1. The molecular mass of the native enzyme was 204 kDa as a trimer. The maximum activity for l-fucose isomerization was at pH 7 and 75°C in the presence of 1 mM Mn²⁺. Its half-life at 70°C was 6.1 h. For aldose substrates, the enzyme displayed activity in decreasing order for l-fucose, with a k _cat of 11,910 min^?1 and a K _m of 140 mM, d-arabinose, d-altrose, and l-galactose. These aldoses were converted to the ketoses l-fuculose, d-ribulose, d-psicose, and l-tagatose, respectively, with 24, 24, 85, 55% conversion yields after 3 h.     

d-Tagatose production in the presence of borate by resting Lactococcus lactis cells harboring Bifidobacterium longum l-arabinose isomerase

Bifidobacterium longum NRRL B-41409 l-arabinose isomerase (l-AI) was overexpressed in Lactococcus lactis using a phosphate depletion inducible expression system. The resting L. lactis cells harboring the B. longum l-AI were used for production of d-tagatose from d-galactose in the presence of borate buffer. Multivariable analysis suggested that high pH, temperature and borate concentration favoured the conversion of d-galactose to d-tagatose. Almost quantitative conversion (92 %) was achieved at 20 g L^?1 substrate and at 37.5 °C after 5 days. The d-tagatose production rate of 185 g L^?1 day^?1 was obtained at 300 g L^?1 galactose, at 1.15 M borate, and at 41 °C during 10 days when the production medium was changed every 24 h. There was no significant loss in productivity during ten sequential 24 h batches. The initial d-tagatose production rate was 290 g L^?1 day^?1 under these conditions.