Rapid isolation of cloned isotype switch variants using fluorescence activated cell sorting

We have used highly specific, directly fluorescein-conjugated heterologous (conventional) and monoclonal antibodies directed against mouse immunoglobulin isotypes in conjunction with the fluorescence activated cell sorter (FACS) to enrich and clone hybridoma cells producing new immunoglobulin heavy chain constant regions. Each variant retains the parental heavy chain variable region and the parental immunoglobulin light chain; thereby each variant binds the same dansyl (DNS) hapten. These isotype switch variants occur at frequencies of approximately 10-5 to 10-6. We were able to isolate the variants by first sorting for an approximate 1000-fold enrichment of the desired immunoglobulin-producing cells, growing these cells for five to nine days, followed by a second 1000-fold enrichment and direct cell cloning into 96 well culture trays. Clones were screened only 3-5 weeks after the original selection for secretion of dansyl-binding immunoglobulin of the selected isotype. Judicious combination of existing methods permits improved analytical techniques using the cell sorter. These include: first, "red" fluorescence staining of dead cells with ethidium bromide or propidium iodide and using the red fluorescence measurement to exclude dead cells from the green fluorescence selection; and second, the use logarithmic amplification of fluorescence signals, allowing for more succinct selection of fluorescence parameters for sorting.     

A universally applicable method of isolating somatic cell hybrids by two-colour flow sorting

A generally applicable technique is described that permits easy identification and isolation of heterokaryons a few hours after fusion. It is based on the labelling of living cells with different fluorochromes, which, at appropriate concentrations do not affect viability or gene expression. Both fluorochromes are relatively stable and do not cross-contaminate unlabelled cells. The technique has a powerful potential in studies on gene regulation in somatic cell hybrids since heterofluorescent hybrids between any type of cells can be isolated directly from large populations of monofluorescent parental cells by using a cell sorter equipped with a single laser. Thus the technique avoids the need for genetically marked parental cells for selection.     

A simple electronic volume cell sorter for clonogenicity assays

A single-parameter electronic volume flow cell sorter that can be easily and inexpensively constructed using existing technology is described. The instrument is designed for ease and flexibility of operation, including such features as a large open area for recovering sorted cells into a variety of dishes or vessels; a remote, electrically activated fluidics system; a mechanism for heating or cooling samples during sorting; a simple arrangement for monitoring and adjusting the sorting control parameters; and an interface to a standard IBM personal computer for data acquisition, analysis, and control of the sorting windows. Several researchers in our laboratory now routinely use this sorter for plating precise numbers of cells directly into culture dishes in an aseptic manner for clonogenicity assays. The instrument can sort cells at rates of up to approximately 2,000 per second with greater than 80% sorting efficiency and no cytotoxicity. An advantage of this system is that the sorting windows can be set to exclude acellular debris and include either the entire cell volume distribution or a subset thereof. Applications of the instrument are detailed, including 1) precise cell plating for low-dose survival studies, 2) separation of cells into age compartments, and 3) rapid inoculation of single cells into multiwell dishes for cloning studies. Advantages of this technology for cell survival studies are detailed, along with some limitations to its applicability.     

Selective cloning of hybridoma cells for enhanced immunoglobulin production using flow cytometric cell sorting and automated laser nephelometry

Techniques for selective cloning of murine hybridoma cells by flow cytometric cell sorting and use of automated laser nephelometry to determine the resultant clones' immunoglobulin secretion levels are described. Using a commercially available attachment to a fluorescence-activated cell sorter, individual hybridoma cells were successfully distributed into microtiter wells in an automated manner based on their forward angle light scatter properties and their reaction to fluorescein-conjugated anti-mouse-IgG. The techniques were used to estimate successfully the frequency of immunoglobulin-secreting cells in established cultures. In addition, heterogeneity of cell surface immunoglobulin expression was observed and utilized as a criterion for flow sorting of new hybridoma variants. In these studies, clones derived from high (anti-IgG) intensity sorting regions yielded cultures with enhanced immunoglobulin secretion levels, as determined by automated laser nephelometry. Furthermore, the surface immunoglobulin phenotype of the derived clones was conserved in subsequent progeny. Finally, it was established that inclusion of propidium iodide in the hybridoma cell sorting mixtures improved cloning efficiency by facilitating enhanced discrimination and elimination of nonviable cells. Our results indicate that flow cytometric-assisted single cell deposition provides positive attributes of several traditional hybridoma cloning techniques and, in addition, furnishes a tool for steering the cloning process toward selection of enhanced immunoglobulin producing cultures.     

An ultra-pure in vitro phase synchrony method employing centrifugal elutriation and viable flow cytometric cell sorting

We present a method of synchronizing cells in G1-, S-, and G2M-phases employing sequential centrifugal elutriation and viable flow cytometric cell sorting of Hoechst-33342 stained Chinese hamster ovary cells. G1- and S-phase cells can be separated to greater than 99% homogeneity and G2-M to 70% purity. Most of the 30% contamination in the G2-M fraction was due to S-phase cells, whose reproductive integrity could be eliminated through the use of high specific activity 3H-TdR. There were minimal toxic effects or perturbations to growth following the selection procedures. The most significant limitation of this technique appears to be the rate of cell sorting, which, with current equipment, is approximately 3,000 cells per second.     

A microfabricated fluorescence-activated cell sorter.

We have demonstrated a disposable microfabricated fluorescence-activated cell sorter (microFACS) for sorting various biological entities. Compared with conventional FACS machines, the microFACS provides higher sensitivity, no cross-contamination, and lower cost. We have used microFACS chips to obtain substantial enrichment of micron-sized fluorescent bead populations of differing colors. Furthermore, we have separated Escherichia coli cells expressing green fluorescent protein from a background of nonfluorescent E. coli cells and shown that the bacteria are viable after extraction from the sorting device. These sorters can function as stand-alone devices or as components of an integrated microanalytical chip.     

Design and application of a versatile triple-laser cell and chromosome sorter

A high-resolution triple-laser sorter was designed and constructed to provide flexible switchover and high-resolution sorting of cells or chromosomes with any combination of one, two, or three lasers. These features provide a central facility instrument that currently serves multiple users and analyzes different stain combinations with minimal switchover effort between experiments. Improved optics and mounts that focus the three laser beams independently are able to resolve beads and chromosomes better than our previously reported dual-laser sorter. An improved signal collection unit with electronically controlled reference positions can be focused more quickly and precisely for any signal combination. A removable dye laser extends the range of usable fluorochrome labels. A rapid sheath switchover permits sorting of sterile cells and sterile chromosomes sequentially without additional sterilization or reservoir sheath change. Improved dual-laser chromosome resolution is at least as good, analyzing 8,000 chromosomes/s, compared to the previous dual-laser bench at 2,000/s. Stimulated and unstimulated peripheral blood lymphocytes were analyzed according to simultaneous measurements of cell surface receptors labeled with a fluoresceinated neuropeptide and a Texas red-labeled antibody as well as DNA content during the cell cycle. These results demonstrate the broad range of potential applications of this triple-laser system.     

Improving the biosafety of cell sorting by adaptation of a cell sorting system to a biosafety cabinet.

BACKGROUND: The jet-in-air cell sorters currently available are not very suitable for sorting potentially biohazardous material under optimal conditions because they do not protect operators and samples as recommended in the guidelines for safe biotechnology. To solve this problem we have adapted a cell sorting system to a special biosafety cabinet that satisfies the requirements for class II cabinets. With aid of this unit, sorting can be performed in conformance with the recommendations for biosafety level 2. METHODS: After integrating a modified fluorescence-activated cell sorter (FACS) Vantage into a special biosafety cabinet, we investigated the influence of the laminar air flow (LAF) inside the cabinet on side stream stability and the analytical precision of the cell sorter. In addition to the routine electronic counting of microparticles, we carried out tests on the containment of aerosols, using T4 bacteriophage as indicators, to demonstrate the efficiency of the biosafety cabinet for sorting experiments performed under biosafety level 2 conditions. RESULTS: The experiments showed that LAF, which is necessary to build up sterile conditions in a biosafety cabinet, does not influence the conditions for side stream stability or the analytical precision of the FACS Vantage cell sorting system. In addition, tests performed to assess aerosol containment during operation of the special biosafety cabinet demonstrated that the cabinet-integrated FACS Vantage unit (CIF) satisfies the conditions for class II cabinets. In the context of gene transfer experiments, the CIF facility was used to sort hematopoietic progenitor cells under biosafety level 2 conditions. CONCLUSIONS: The newly designed biosafety cabinet offers a practical modality for improving biosafety for operators and samples during cell sorting procedures. It can thus also be used for sorting experiments with genetically modified organisms in conformance with current biosafety regulations and guidelines.     

A UV‐C LED‐based unit for continuous decontamination of the sheath fluid in a flow‐cytometric cell sorter

Aseptic cell sorting is challenging, especially when a flow‐cytometric cell sorter is not operated in a sterile environment. The sheath fluid system of a cell sorter may be contaminated with germs such as bacteria, yeasts, viruses, or fungi. Thus, a regular chemical cleaning procedure is required to prepare a sorter for aseptic cell sorting by flushing the fluidic system. However, this procedure is time consuming, and most importantly, the researcher can never be sure that the cleaning process was successful. Here we present a method in which the sheath fluid of a cell sorter was decontaminated by irradiation with UV‐C light using a flow‐through principle. Using this principle, we were able to achieve a 5 log reduction of bacteria in the sheath fluid.     

Discrimination of viable and non-viable cells using propidium iodide in two color immunofluorescence

The relative ease with which a flow cytometer can perform simultaneous two color immunofluorescence to examine subpopulations of lymphoid cells has been well documented. Thus, flow cytometers equipped with only a single argon laser can be used to delineate various cell types by exciting both fluorescein- and phycoerythrin-conjugated antibodies to cell surface antigens. One problem that remains, however, is the artifactual staining of dead cells and clumps, which cannot be distinguished from viable cells on the basis of cell surface staining characteristics. We describe a method for simultaneous two color analysis or sorting of viable leukocytes which requires only a single laser. The method utilizes propidium iodide, which stains dead cells and thereby excludes such cells from the analysis. Using this method, as many as four viable cell types have been simultaneously analyzed in a single sample.     

Cell synchrony techniques. I. A comparison of methods

Selected cell synchrony techniques, as applied to asynchronous populations of Chinese hamster ovary (CHO) cells, have been compared. Aliquots from the same culture of exponentially growing cells were synchronized using mitotic selection, mitotic selection and hydroxyurea block, centrifugal elutriation, or an EPICS V cell sorter. Sorting of cells was achieved after staining cells with Hoechst 33258. After synchronization by the various methods the relative distribution of cells in G1, S, or G2 + M phases of the cell cycle was determined by flow cytometry. Fractions of synchronized cells obtained from each method were replated and allowed to progress through a second cell cycle. Mitotic selection gave rise to relatively pure and unperturbed early G1 phase cells. While cell synchrony rapidly dispersed with time, cells progressed through the cell cycle in 12 hr. Sorting with the EPICS V on the modal G1 peak yielded a relatively pure but heterogeneous G1 population (i.e. early to late G1). Again, synchrony dispersed with time, but cell-cycle progression required 14 hr. With centrifugal elutriation, several different cell populations synchronized throughout the cell cycle could be rapidly obtained with a purity comparable to mitotic selection and cell sorting. It was concluded that, either alone or in combination with blocking agents such as hydroxyurea, elutriation and mitotic selection were both excellent methods for synchronizing CHO cells. Cell sorting exhibited limitations in sample size and time required for synchronizing CHO cells. Its major advantage would be its ability to isolate cell populations unique with respect to selected cellular parameters.     

Cell Synchrony Techniques. I. A Comparison of Methods

Abstract Selected cell synchrony techniques, as applied to asynchronous populations of Chinese hamster ovary (CHO) cells, have been compared. Aliquots from the same culture of exponentially growing cells were synchronized using mitotic selection, mitotic selection and hydroxyurea block, centrifugal elutriation, or an EPICS V cell sorter. Sorting of cells was achieved after staining cells with Hoechst 33258. After synchronization by the various methods the relative distribution of cells in G₁ S, or G₂+ M phases of the cell cycle was determined by flow cytometry. Fractions of synchronized cells obtained from each method were replated and allowed to progress through a second cell cycle. Mitotic selection gave rise to relatively pure and unperturbed early G₁ phase cells. While cell synchrony rapidly dispersed with time, cells progressed through the cell cycle in 12 hr. Sorting with the EPICS V on the modal G₁ peak yielded a relatively pure but heterogeneous G₁ population (i.e. early to late G₁). Again, synchrony dispersed with time, but cell-cycle progression required 14 hr. With centrifugal elutriation, several different cell populations synchronized throughout the cell cycle could be rapidly obtained with a purity comparable to mitotic selection and cell sorting. It was concluded that, either alone or in combination with blocking agents such as hydroxyurea, elutriation and mitotic selection were both excellent methods for synchronizing CHO cells. Cell sorting exhibited limitations in sample size and time required for synchronizing CHO cells. Its major advantage would be its ability to isolate cell populations unique with respect to selected cellular parameters.     

Novel rapid method for visualization of extent and location of aerosol contamination during high-speed sorting of potentially biohazardous samples

BACKGROUND: Containment of potentially biohazardous aerosols that result from high-speed sorting of human cells has been an increasingly important problem in analytical cytometry. The current method for assessing the efficiency of aerosol containment involves detection of aerosols containing sorted T4 bacteriophage on lawns of T4-susceptible Escherichia coli on plates that are placed in and around the sort area. Although this method is sensitive, it is time consuming and involves maintenance and handling of bacteria and sorting of bacteriophage that may themselves serve as sources of contamination for sorted viable human cells. METHODS: Glo Germ (5-microm melamine copolymer resin beads), which are fluorescent under black light illumination, were sorted on a Beckman-Coulter Elite ESP sorter in order to visualize deposition of aerosols under normal and mock failure modes. RESULTS: Glo Germ was successfully used under both normal sorting conditions, as well as mock failure mode, to visualize aerosol formation. CONCLUSIONS: We have developed a method to examine aerosol containment using modified Glo Germ, a product used for teaching aseptic technique in hospitals, industry, restaurants, and schools. Use of this technique represents a rapid, inexpensive, qualitative analysis of the extent and location of aerosol contamination from cell sorters.     

Preservation of cells sorted individually onto microscope slides with a fluorescence-activated cell sorter

Fluorescence-activated cell sorters permit analyses and separation of cell populations based on light scatter and surface immunofluorescence parameters. Since a sorter can deposit individually identifiable cells onto a microscope slide, it was considered of interest to combine the flow measurements with analyses available on cells adhering to a surface as in, for example, morphological studies, cytoplasmic immunofluorescent staining, and mRNA in situ hybridization. A necessary condition for these studies is the preservation of cell structures after sorting. We report here a procedure suitable for this purpose. The most important features of this procedure are A) reducing the saline content of the sorter sheath fluid to about 0.0015 M (one-hundredth that of normal saline) to prevent cell damage due to hypertonicity during drying, and B) coating the substrate with a thin layer of newborn calf serum to promote the adherence of the cells to the substrate during subsequent fixing and staining.     

Highly nonlinear photodamage in two-photon fluorescence microscopy

Two-photon fluorescence excitation is being increasingly used in laser scan microscopy due to very low photodamage induced by this technique under normal operation. However, excitation intensity has to be kept low, because nonlinear photodamage sets in when laser power is increased above a certain threshold. We studied this kind of damage in bovine adrenal chromaffin cells, using two different indicators of damage: changes in resting [Ca(2+)] level and the degranulation reaction. In agreement with previous studies, we found that, for both criteria, damage is proportional to the integral (over space and time) of light intensity raised to a power approximately 2.5. Thus, widening the laser pulse shape at constant average intensity both in time and in focal volume is beneficial for avoiding this kind of damage. Both measures, of course, reduce the two-photon fluorescence excitation. However, loss of signal can be compensated by increasing excitation power, such that, at constant damaging potential, signals may be even larger with long pulses and large focal volumes, because the exponent of the power law of damage is higher (mu approximately 2.5) than that of the two-photon signal (mu approximately 2).     

Somatic cell genetics and flow cytometry

Human genes coding cell surface molecules can be introduced into mouse host cells using a variety of somatic cell genetic techniques. Because these human gene products can be detected using indirect immunofluorescence on viable cells, the genes themselves can be monitored and manipulated using flow cytometry and sorting. In this paper, we review ways that we have used cell sorting to develop a somatic cell genetic analysis of the human cell surface.     

A two-photon and second-harmonic microscope

Two-photon microscopy has revolutionized life sciences by enabling long-term imaging of living preparations in highly scattering tissue while minimizing photodamage. At the same time, commercial two-photon microscopes are expensive and this has prevented the widespread application of this technique to the biological community. As an alternative to commercial systems, we provide an update of our efforts designing custom-built two-photon instruments by modifying the Olympus FluoView laser scanning confocal microscope. With the newer version of our instrument we modulate the intensity of the laser beam in arbitrary spatiotemporal patterns using a Pockels cell and software control over the scanning. We can also perform simultaneous optical imaging and optical stimulation experiments and combine them with second harmonic generation measurements.     

Green fluorescent protein as a second selectable marker for selection of high producing clones from transfected CHO cells

Mammalian cells are often used for the expression of recombinant proteins. The process of screening transfected cells randomly for high producing clones is tedious and time consuming. We evaluated using green fluorescent protein (GFP) for selection of high producing clones by fluorescence-activated cell sorter (FACS) to reduce screening effort. We expressed neurotrophin-3 (NT3), deoxyribonuclease (DNase), or vascular endothelial growth factor (VEGF) with GFP in Chinese hamster ovary cells. The vector expressed the desired secreted protein and the selectable marker, dihydrofolate reductase, in one expression unit and the intracellular GFP in a second expression unit. Transfected cells were grown in selection medium and sorted by FACS. High fluorescence clones were obtained and found to produce high amounts of the desired protein; VEGF productivity correlated well with GFP fluorescence in 48 clones. Further studies demonstrated that productivity correlated very well with RNA of the desired protein. For comparison, we randomly picked and screened 144 VEGF clones, and the highest producing VEGF clone obtained produced 0.7 pg/cell/day. In contrast, the highest producing VEGF clone obtained by FACS sorting produced 4.4 pg/cell/day. FACS sorting therefore selected high producing clones efficiently. Since an assay for the desired protein is not required, high producing clones for a protein of unknown function can be obtained by FACS sorting followed by measuring the RNA level of the desired protein in the highly fluorescent clones.     

Assessment of bacterial viability status by flow cytometry and single cell sorting

Rapid bacterial detection and viability measurements have been greatly enhanced by recent advances in the use of fluorescent stains in cytometry. It has previously been shown that four physiological states can be distinguished : reproductively viable, metabolically active, intact and permeabilized. Previous sorting experiments have shown that not all intact cells readily grow, but some intact cells can grow even when they fail to show metabolic activity, as determined by esterase turnover. To circumvent the limitations imposed by active dye extrusion or cell dormancy on viability measurements used to date (e.g. enzyme activity or cell polarization), a fast triple fluorochrome staining procedure has been developed that takes account of these problems. This allows further cellular characterization of intact cells by : active exclusion of ethidium bromide (EB) (metabolically active cells), uptake of EB but exclusion of bis-oxonol (BOX) (de-energized but with a polarized cell membrane) and uptake of both dyes (depolarized). Permeabilized cells were identified by propidium iodide (PI) uptake. The method was validated using an electronically programmable single cell sorter (EPICS Elite^®) and aged Salmonella typhimurium cells. Reproductive viability was determined by sorting single cells to their staining pattern directly onto agar plates. Most polarized cells could be recovered as well as a significant fraction of the depolarized cells, demonstrating that depolarization is a sensitive measure of cell damage but a poor indicator of cell death.