The Energetic Metabolism of Societies: Part II: Empirical Examples

Part I of this set of articles proposed methods to account for the energetic metabolism of societies. In this second part, the methods explicated in Part I are used to analyze the energy flows of societies with different "modes of subsistence": hunter-gatherers, a contemporary agricultural society in southeastern Asia, and a contemporary industrial society (Austria). The empirical examples are used to demonstrate differences in the "characteristic metabolism" of different modes of sub-sistence. The energy system of hunter-gatherers can be described as an "uncontrolled solar energy system," based mainly upon harvesting biomass without attending to its reproduction. Hunter-gatherers use only about 0.001% to 0.01% of the net primary production (NPP) of the territory they inhabit. Agricultural societies harness NPP to a much higher extent: Although agriculture often reduces NPP, the amount of biomass that agricultural societies use is much higher (about 20% of potential NPP). Because ecological energy flows are the main source of energy for agricultural societies, NPP strictly limits the energetic metabolism of agricultural societies. Industrial society uses area-independent energy sources (fossil and nuclear energy), which, however, result in new sustainability problems, such as greenhouse gas emissions. By providing methods to account for changes in energy flows, the metabolism approach proves itself to be a useful concept for analyzing society-environment interactions. The article demonstrates the difference between the metabolism approach and conventional energy statistics and discusses the significance of the proposed approach for sustainable development.     

The Energetic Metabolism of the European Union and the United States: Decadal Energy Input Time-Series with an Emphasis on Biomass

This article presents an assessment of energy inputs of the European Union (the 15 countries before the 2004 enlargement, abbreviated EU‐15) for the period 1970–2001 and the United States for 1980–2000. The data are based on an energy flow analysis (EFA) that evaluates socioeconomic energy flows in a way that is conceptually consistent with current materials flow analysis (MFA) methods. EFA allows assessment of the total amount of energy required by a national economy; it yields measures of the size of economic systems in biophysical units. In contrast to conventional energy balances, which only include technically used energy, EFA also accounts for socioeconomic inputs of biomass; that is, it also considers food, feed, wood and other materials of biological origin. The energy flow accounts presented in this article do not include embodied energy. Energy flow analyses are relevant for comparisons across modes of subsistence (e.g., agrarian and industrial society) and also to detect interrelations between energy utilization and land use. In the EU‐15, domestic energy consumption (DEC = apparent consumption = domestic extraction plus import minus export) grew from 60 exajoules per year (1 EJ = 10¹⁸ J) in 1970 to 79 EJ/yr in 2001, thus exceeding its territory's net primary production (NPP, a measure of the energy throughput of ecosystems). In the United States, DEC increased from 102 EJ/yr in 1980 to 125 EJ/yr in 2000 and was thus slightly smaller than its NPP. Taken together, the EU‐15 and the United States accounted for about 38% of global technical energy use, 31% of humanity's energetic metabolism, but only 10% of global terrestrial NPP and 11% of world population in the early 1990s. Per capita DEC of the United States is more than twice that of the EU‐15. Calculated according to EFA methods, energy input in the EU and the United States was between one‐fifth and one‐third above the corresponding value reported in conventional energy balances. The article discusses implications of these results for sustainability, as well as future research needs.     

Comments on "The Energetic Metabolism of the European Union and the United States" by Haberl and Colleagues: Theoretical and Practical Considerations on the Meaning and Usefulness of Traditional Energy Analysis

This commentary responds to the study "The Energetic Metabolism of the European Union and the United States: Decadal Energy Input Time-Series with an Emphasis on Biomass" by Haberl and colleagues, published in this issue. Their article provides an analysis based on a set of data that could be very useful for discussing the sustainability of economic processes in terms of resource flows and societal relations to nature. The authors' choice to adopt a reductionist analysis of the metabolism of societies in energetic terms—that is, an analysis based on a single-scale and single-variable indicator such as "joules of energy input metabolized per year for the whole society"—is a controversial one. Such a choice implies the aggregation of different types of data (referring to nonequivalent categories of energy inputs) into a single overall assessment. That is, in their study the authors are adopting an old and controversial solution for aggregating different types of energy forms: applying a set of flat conversion factors (calorimetric equivalent) to the different types of energy inputs considered.
This commentary discusses the trade-off entailed by any method of aggregation of energy forms of different quality: (i) compression—reducing the number of indices used—versus (ii) relevance—maintaining a diversity of categories needed for the usefulness of the analysis. A brief history of the main strategies adopted, so far, for dealing with the problem of aggregation suggests implications for the approach adopted by Haberl and colleagues.     

The Life-Cycle of Chlorine, Part I: Chlorine Production and the Chlorine-Mercury Connection

Chlorine is an important industrial chemical. Not only is it a component of many important products, it is also needed for many chemical manufacturing processes, even where it does not appear in the final product. But a number of chlorine chemicals, especially organochlorines, are toxic, carcinogenic, tentogenic or otherwise potentially disturbing to the environment. For this reason, some environmentalists—notably Greenpeace-have advocated a ban, not just on some products but on all uses of elemental chlorine. The chemical industry is taking this threat seriously and mounting a vigorous defense. But the debate so far is not illuminating the issues effectively, because both sides are selectively using questionable and unverifiable data.
The scientific uncertainties are not really the problem. Rather, data in the public domain and accessible to environmentalists and even regulatory authorities are of very poor qualrty. Because of industry secrecy much crucial inforrnation is unavailable and some of what is available is misleading or wrong. The dual purposes of this article, and the ones that follow, are (I) to elucidate the information requirements for an adequate life-cycle analysis of chlorine and its uses and (2) to indicate how and where the use of massbalance methodology can help identify errors and fill in gaps.
The present article deals with electrolytic chlorine produdion and mercury flows arising from chlorine production. Subsequent articles deal with conversion processes and losses and further chemical industry uses of chlorine, major end uses of chlorine and chlorine chemicals, and persistent organochlorine pollutants.     

The Life Cycle of Chlorine, Part III

In the two previous articles in this series we reviewed the major processes of chlorine production (Part I) and its intermediate uses and waste products in the production of other chemicals (Part 11). In this article I consider some of the final applications of chlorine (e.g., for water treatment and pulp bleaching) and the uses of the most important chlorinated compounds such as solvents, chlorofluorocarbons, and the plastic polyvinyl chloride in the industrial economy. I summarize known evidence regarding their environmental fates. The special case of persistent long-lived toxic compounds (e.g., pesticides) will be discussed in a subsequent article.     

Approaches for Quantifying the Metabolism of Physical Economies: Part I: Methodological Overview

This article is the first of a two-part series that describes and compares the essential features of nine existing "physical economy" approaches for quantifying the material demands of the human economy upon the natural environment. A range of material flow analysis (MFA) and related techniques is assessed and compared in terms of several major dimensions. These include the system boundary identification for material flow sources, extents, and the key socioinstitutional entities containing relevant driving forces, as well as the nature and detailing of system components and flow interconnections, and the comprehensiveness and types of flows and materials covered.
Shared conceptual themes of a new wave of physical economy approaches are described with a brief overview of the potential applications of this broad family of methodologies. The evolving and somewhat controversial nature of the characteristics and role that define MFA is examined. This review suggests the need to specify whether MFA is a general metabolic flow measurement procedure that can be applied from micro to macrolevels of economic activity, or a more specific methodology aimed primarily at economy-wide analyses that "map" the material relations between society and nature. Some alternative options for classifying MFA are introduced for discussion before a more detailed comparative summary of the key methodological features of each approach in the second part of this two-part article.
The review is presented (1) as a reference and resource for the increasing number of policy makers and practitioners involved in industrial ecology and the evaluation of the material basis of economies and the formulation of eco-efficiency strategies, and (2) to provoke discussion and ongoing dialogue to clarify the many existing areas of discordance in environmental accounting related to material flows, and help consolidate the methodological basis and application of MFA.     

Chlorine in the Netherlands, Part I, An Overview

Over the last decade debate among environmental pressure groups, industry, and the authorities overthe threat posed by chlorine has become extremely polarized. In response, the Dutch minister of the environment commissioned a strategic study on chlorine. The first phase of the study described in this article, was designed as a substance flow analysis, encompassing some 99% of the flows of chlorinated hydrocarbons (CHC) in the Netherlands. The study provided an overview of flows of CHC through the Dutch anthroposphere and to inventory the leaks to the environment. Emissions, wastestreams, exports, imports, and flows through the anthroposphere were inventoried, drawing on all possible sources including the Dutch emission registration database, life-cycle assessment (LCA) databases, and industrial data. Emissions were evaluated using the characterization step from LCA methodology. Emissions with toxicological effects were also evaluated on the basis of actual risk assessments of the National Institute of Public Health and Environmental Protection (RIVM).This resulted in the establishment of six groups of priority segments in the Dutch chlorine chain, for which additional measures will be prepared. The study showed that the environmental groups' pronouncements about the structural dangers associated with the chlorine chain are not supported by current knowledge. The study however; also indicates that important areas of uncertainty require attention, especially relating to the possible emissions of persistent bioaccumulating toxic micropollutants.     

Accounting for Fluorine: Production,Use, and Loss

Fluorine is an essential element to human health and to the chemical industry. In spite of our dependence on fluorine and fluorine compounds, we have yet to learn to use them wisely. Our fluorine history, which spans about a hundred years, has had negative effects such as hydrofluoric acid pollution caused by aluminum smelters and ozone depletion due to chlorofluorocarbon (CFC) emissions. More recent concerns center on greenhouse effects from CFCs, hydrofluorocarbons (HFCs), and sulfur hexafluoride (SF6). In this article we note also that fluorine is a nonrenewable resource that is nonsubstitutable for many purposes. This article tracks fluorine from sources through conversion processes to end uses, most of which are dissipative. We present a stock‐flow model of the fluorine system. Based on this model we consider some possible measures that could be taken to increase the degree of recovery. To mention one example, a large percentage of the world demand for fluorspar could be supplied by the phosphate rock (fertilizer) industry, which currently dissipates a great deal of recoverable fluorine in waste phospho‐gypsum.     

Applying Ecological Input-Output Flow Analysis to Material Flows in Industrial Systems: Part I: Tracing Flows

Input-output mathematics, which allows a modeler to fully consider direct and indirect relationships among conserved flows in a system, has a long history in economics with prominent use dating to Leontief in the 1930s. Nearly all previous industrial applications of input-output analysis have been grounded in the monetary flows of an economy. Here however, because of the central nature of physical flows in the environmental impact of industry, we consider physical flows to be a fundamental component of an industrial economy. Hence, we propose an input-output based approach for modeling physical flows in industry independent of their monetary implications.
In this first part of a two-part article, a framework for using input-output mathematics to model material and energy flows is constructed from a foundation laid by previous research in nutrient and energy cycling in natural ecosystems. The mathematics of input-output flow analysis is presented from an ecological perspective, culminating in two core capabilities: tracing of flows with environs (investigated in this article) and characterizing system behavior with flow metrics (presented in the second article). We assert that environ analysis is an effective means for tracing flows through industrial systems while fully considering direct and indirect flow paths. We explore material flows of aluminum and five other metals in depth using environ analysis in this article.     

Heavy Metal Balances, Part I

The control of heavy metals in such a way that soil functioning and product quality are not impeded is a prerequisie to sustainable agricutture. The current status of heavy metal accumulation in agricultural soils differs widely by region, by metal, and by agricultural system; levels of concern have already been reached in several regions (for instance, in the Netherlands and Australia). An analysis of the input and output fluxes of cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) in agriculture and of their resulting accumulation in agricultural soils is necessary to define strategies that ensure sustainable management of these metals in agricultural systems. In this article, general aspects of heavy-metal balance studies are described for the agricultural sector within the broader context of substance flow analysis and industrial ecology. The approach chosen in this study is both precautionary and related to actual problem areas.     

Lifespan of Commodities,Part I

Lifespan is an essential parameter for the accounting and analysis of material stocks and flows, one of the main research topics in industrial ecology. Lifespan is also important as a parameter that portrays the current and historical situation of industrial metabolism, which is an area of interest to industrial ecologists. In the present article, the available information from various reports on product lifespan was reviewed. Although we found a large number of data for many durables, the definition of lifespan in published articles varied, which limited our ability to compare reported values. We therefore first defined lifespan and then compared the international and historical data. We compiled more than 1,300 data sets from various sources and identified some differences among the types of goods and among regions. With the reviewed data noted in this article, we established a database, named LiVES (Lifespan Database for Vehicles, Equipment, and Structures), and will disclose it on the Internet to share the information.     

The Reproductive Ecology of Industrial Societies,Part I

Is fertility relevant to evolutionary analyses conducted in modern industrial societies? This question has been the subject of a highly contentious debate, beginning in the late 1980s and continuing to this day. Researchers in both evolutionary and social sciences have argued that the measurement of fitness-related traits (e.g., fertility) offers little insight into evolutionary processes, on the grounds that modern industrial environments differ so greatly from those of our ancestral past that our behavior can no longer be expected to be adaptive. In contrast, we argue that fertility measurements in industrial society are essential for a complete evolutionary analysis: in particular, such data can provide evidence for any putative adaptive mismatch between ancestral environments and those of the present day, and they can provide insight into the selection pressures currently operating on contemporary populations. Having made this positive case, we then go on to discuss some challenges of fertility-related analyses among industrialized populations, particularly those that involve large-scale databases. These include “researcher degrees of freedom” (i.e., the choices made about which variables to analyze and how) and the different biases that may exist in such data. Despite these concerns, large datasets from multiple populations represent an excellent opportunity to test evolutionary hypotheses in great detail, enriching the evolutionary understanding of human behavior.     

Society's Metabolism

"Societal metabolism" provides the appropriate conceptual basis for the rapidly growing development and analylical and policy interest in materials flow analysis (MFA). Following the review of the earlier intellectual background of societal metabolism in the first installment of this two-part article, this paper focuses on the current state of the art by examining more recent research referring t o societal metabolism in terms of material and substance flows. An operational classification of the literature according to frame of reference (socioeconomic system, ecosystem), system level (global, national, regional, functional, temporal), and types of flows under consideration (materials, energy, substances) highlights some of its characteristic features. There follows an integrated discussion of some of the major conceptual and methodological properties of MFA, with a particular focus on the field of bulk materials flows on a national level, comparing the major empirical results. Finally, the theoretical stringency research productivity, and political relevance of the MFA-related studies are assessed.     

Approaches for Quantifying the Metabolism of Physical Economies: A Comparative Survey: Part II: Review of Individual Approaches

This article is the second of a two-part series that describes and compares the essential features of nine "physical economy" approaches for mapping and quantifying the material demands of the human economy upon the natural environ-ment. These approaches are critical tools in the design and implementation of industrial ecology strategies for greater eco-efficiency and reduced environmental impacts of human economic activity. Part I of the series provided an overview, meth-odological classification, and comparison of a selected set of major materials flow analysis (MFA) and related techniques. This sequel includes a convenient reference and overview of the major metabolism measurement approaches in the form of a more detailed summary of the key specific analytical and other features of the approaches introduced in part I. The surveyed physical economy related environmental analysis ap-proaches include total material requirement and output mod-els, bulk MFA (IFF (Department of Social Ecology, Institute for Interdiscplinary Studies of Austrian Universities) material flow balance model variant), physical input-output tables, substance flow analysis, ecological footprint analysis, environmental space, material intensity per unit service, life-cycle assessment (LCA), the sustainable process index, and company-level MFA.     

The Changing Metabolism of Cities

Data from urban metabolism studies from eight metropolitan regions across five continents, conducted in various years since 1965, are assembled in consistent units and compared. Together with studies of water, materials, energy, and nutrient flows from additional cities, the comparison provides insights into the changing metabolism of cities. Most cities studied exhibit increasing per capita metabolism with respect to water, wastewater, energy, and materials, although one city showed increasing efficiency for energy and water over the 1990s. Changes in solid waste streams and air pollutant emissions are mixed.
The review also identifies metabolic processes that threaten the sustainability of cities. These include altered ground water levels, exhaustion of local materials, accumulation of toxic materials, summer heat islands, and irregular accumulation of nutrients. Beyond concerns over the sheer magnitudes of resource flows into cities, an understanding of these accumulation or storage processes in the urban metabolism is critical. Growth , which is inherently part of metabolism, causes changes in water stored in urban aquifers, materials in the building stock, heat stored in the urban canopy layer, and potentially useful nutrients in urban waste dumps.
Practical reasons exist for understanding urban metabolism. The vitality of cities depends on spatial relationships with surrounding hinterlands and global resource webs. Increasing metabolism implies greater loss of farmland, forests, and species diversity; plus more traffic and more pollution. Urban policy makers should consider to what extent their nearest resources are close to exhaustion and, if necessary, appropriate strategies to slow exploitation. It is apparent from this review that metabolism data have been established for only a few cities worldwide, and interpretation issues exist due to lack of common conventions. Further urban metabolism studies are required.     

湘南山区农业生态系统能量分析

一、引言由于农业系统的复杂性和存在较多的随机因素,对农业系统实行全面定量研究是比较困难的,仅从定性的描述和一些经济指标来判定系统的优劣及系统的特征是不理想的。而从能量观点对农业生态系统加以分析则是一个全面且能定量的方法,并且具有较强的客观性,能够反映农业生态系统最基本、最本质的关系。     

与医学相关的营养与代谢方面的新概念

近年来,与医学相关的营养与代谢的研究出现不少新的认识与新发现。本文总结了以下5个方面的新概念：供能的营养物质不仅是供能,还需注意他们对健康的影响;以构成蔗糖分子一半的果糖为例,它竟然是促成代谢综合征、心脑血管病等疾病的因素;食物纤维是极其重要不可或缺的营养素;应高度重视维护正常肠道菌群,因为它与人体的健康与多种疾病密切相关;全食物营养不仅能维持生命,还能增强体质、避免和减少疾病;植物营养素具有抗氧化、抗炎症及抗癌等作用,是全食物营养不可或缺的组成部分。人体营养与物质代谢研究的终极目标是：增强体质,预防和减少疾病,健康长寿。希望本文能够带给读者一些启发。