Reaction of cyanamide and their derivatives with (η-C5H5)Mn(CO)3 and (η-C5H4CH3)Mn(CO)3

The reaction of cyanamide and its derivatives with the (η⁵-C₅H₅)Mn(CO)₂(THF) and (η⁵-C₅H₄CH₃)Mn(CO)₂(THF) complexes affords the cyanamide substituted complexes of types (η⁵-C₅H₅)Mn(CO)₂(NCN(R′)(R″)) (2a-d) and (η⁵-C₅H₄CH₃)Mn(CO)₂(NCN(R′)(R″)) (3a-e). All complexes were characterized by spectroscopy (¹H, ¹³C NMR, IR), elemental and mass spectroscopy analysis. Complex 2b (η⁵-C₅H₅)Mn(CO)₂(NCN(CH₃)₂) was additionally examined by single crystal X-ray structure determination.     

Synthesis, characterization and crystal structure of the bimetallic cyano-bridged [(η-C5H5)(PPh3)2Ru(μ-CN)Ru(PPh3)2(η-C5H5)][PF6]

The bimetallic cyano-bridged [(η⁵-C₅H₅)(PPh₃)₂Ru(μ-CN)Ru(PPh₃)₂(η⁵-C₅H₅)][PF₆] (1) was prepared by reaction of [(η⁵-C₅H₅)(PPh₃)₂RuCl] with N,N′-bis(cyanomethyl)ethylenediamine. The single crystal structure determined by X-ray diffraction showed crystallization on the triclinic P1 space group with a perfect alignment of the cyanide bridges. This accentric crystallization was explored having in view the NLO properties at the macroscopic level, determined by the Kurtz Powder technique. Besides the very low efficiency values for the second harmonic generation, the value obtained for the bimetallic complex 1 showed to be higher than one of the parent complex [(η⁵-C₅H₅)(PPh₃)₂RuCN] (2).     

Photochemical displacement of the benzene ligand in [(η-C6H6)Ru(CH3CN)2(L)] and [(η-C6H6)Ru(CH3CN)(L2)] (L=CH3CN, PPh3, L2=dppe, bipy)

Photoirradiation with a 150 W medium-pressure Hg lamp for 17 h in acetontrile as the solvent replaces the benzene ligand in the cationic complexes [(η⁶-C₆H₆)Ru(CH₃CN)₂(L)]²⁺ and [(η⁶-C₆H₆)Ru(CH₃CN)(L₂)]²⁺ (L=CH₃CN, PPh₃, L₂=dppe, bipy) with acetonitrile. These replacements are equally clean to those reported before for analogous CpRu⁺ complexes. Crystal structures of the products obtained are included.     

Oxidation of [Ir(η-C5Me5)(C8H4S8)] and crystal structures of [IrI(η-C5Me5)(C8H4S8)](I3) and [IrI(η-C5Me5)(C8H4S8)](I3)1/2(I7)1/2

[Ir(η⁵-C₅Me₅)(C₈H₄S₈)] (1) [ = 2-{(4,5-ethylenedithio)-1,3-dithiole-2-ylidene}-1,3-dithiole-4,5-dithionate(2−)] was reacted with iodine in dichloromethane to afford one-electron- and two-electron-oxidized species [IrI(η⁵-C₅Me₅)(C₈H₄S₈)] (2), [IrI(η⁵-C₅Me₅)(C₈H₄S₈)](I₃) (3) and [IrI(η⁵-C₅Me₅)(C₈H₄S₈)](I₅) (4). The oxidized species exhibit electrical conductivities of (1.1-5.0) × 10⁻⁶ S cm⁻¹ measured for compacted pellets at room temperature. The X-ray crystal structures of the two-electron-oxidized complexes 3 and 4 revealed the Ir-I bonds for both of them and the presence of for 3 and ions for 4 as the counter anions. They have many S-S and S-I non-bonding contacts to form two-dimensional molecular interaction sheets in the solid state.     

Actinide complexes with the Kläui tripodal oxygen ligand - crystal structure of [{η-C5H5(CH2C(CH3)3)}Co{P(O)(OC2H5)2}3]2U

Reaction between [(C₅H₅)Co{P(O)(OEt)₂}₃]₂UCl₂ and neopentyl lithium affords the novel complex, [{η⁴-C₅H₅(CH₂C(CH₃)₃)}Co{P(O)(OEt)₂}₃]₂U, in which the uranium metal center has been dehalogenated and the neopentyl nucleophiles have attacked the cyclopentadienyl groups on the Kläui ([(C₅H₅)Co{P(O)(OEt)₂}₃]⁻) ligands. The uranium atom in the title compound possesses octahedral geometry defined by the oxygen atoms from two sets of tripodal oxygen ligands, while the cyclopentadienyl ligands are bound η⁴ to the cobalt atoms. The formation of this complex suggests that the Kläui ligand may not be a suitable ligand framework for supporting organometallic complexes of oxophilic early actinides.     

Adduct formation of [(η-C7H7)Zr(η-C5H5)] with phosphines and N-heterocyclic carbenes: An experimental and theoretical study

The reaction of [(η⁷-C₇H₇)Zr(η⁵-C₅H₅)] with two Lewis bases, tetramethylimidazolin-2-ylidene and PMe₃, is reported and their stability probed via spectroscopic and theoretical methods. The strongly σ-basic N-heterocyclic carbene forms a stable adduct which has been structurally characterised, whilst the PMe₃ ligand coordinates weakly to the metal centre. Variable temperature ³¹P NMR spectroscopy has been used to determine the activation energy for this process (ΔG^‡ = 40.5 ± 1.9 kJ mol⁻¹). DFT calculations have been performed on both complexes and the structures discussed. In addition, the enthalpies for the formation of these compounds have been calculated [ΔH⁰(Zr-IMe) = −56.3 kJ mol⁻¹; ΔH⁰(Zr-PMe₃) = −2.3 kJ mol⁻¹] and show that the N-heterocyclic carbene forms a thermodynamically much more stable adduct than that with PMe₃.     

Anionic ruthenium(II) alkyls with ancillary diene and dienyl ligands: Synthesis and structures of [(η,η-C7H8)RuMe4] and [(η,η-C8H11)RuMe3]

Treatment of the ruthenium(II) diene complexes [(η²,η²-nbd)RuCl₂]_n or [(η²,η²-cod)RuCl₂]_n with 4 equiv. of methyllithium in the presence of N,N,N′,N′-tetramethylethylenediamine (tmed) yields the methyl complexes [Li(tmed)]₂[(η²,η²-nbd)RuMe₄] (1) and [Li(tmed)]₂[(η³,η²-C₈H₁₁)RuMe₃] (2), respectively, where nbd = norbornadiene and cod = 1,5-cyclooctadiene. In the latter compound, the cyclooctadiene ligand has been deprotonated to afford a η³,η²-1,2,3:5,6-cyclooctadienyl group. Both complexes were studied by ¹H and ¹³C{¹H} NMR spectroscopy, and the crystal structure of 2 was determined. One lithium atom in 2 is four-coordinate and bridges between one ruthenium-bound methyl group and one of the wingtip allylic carbon atoms in the η³,η²-C₈H₁₁ ligand. The other lithium atom is five-coordinate, and forms contacts with the other two Ru-Me groups and with the other wingtip carbon atom of the allyl unit.     

Crystallographic and theoretical studies of (η-C5Me5)Ru(2,4-dimethyl-η-pentadienyl) and [(η-C5Me5)Rh(2,4-dimethyl-η-pentadienyl)][BF4]

The determination of the solid state structure of Cp*Ru(2,4-dimethyl-η⁵-pentadienyl) (1), where Cp* = pentamethylcyclopentadienyl, fills the gap in the series of previously established structures of closely related compounds. Compound 1 does not exhibit the ideal C_S symmetry and its conformation is intermediate between the C_S-synperiplanar eclipsed and C_S-antiperiplanar arrangements of the ligands. Density functional theory studies indicate that the C_S-synperiplanar eclipsed, C_S-antiperiplanar, and intermediate conformations of 1 and Cp*Rh(2,4-dimethyl-η⁵-pentadienyl)⁺ (2) do not differ by more than a few tenths of 1 kcal/mol. The geometrical features of cation 2 are similar to those of 1, and in both complexes the pentadienyl ligands are not planar. The metal-carbon distances to the Cp* ligands in 1 and 2 are comparable, while the metal-carbon distances to the pentadienyl moiety are somewhat shorter in the Ru complex. A study of the conformational flexibility of the Cp* ligand in 5610 organometallic complexes showed that it usually shields the central metal by 36.2(10)%, provided the metal-centroid(Cp*) distances are normalized to 2.28 Å. The corresponding values in 1 and 2 are 37.2% and 37.4%, respectively.     

Oxidation of [Ir(η-C5Me5)(C3S5)] [C3S5 = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] and X-ray crystal structure of [IrBr(η-C5Me5)(μ-C2S4)IrBr(η-C5Me5)]

[Ir(η⁵-C₅Me₅)(C₃S₅)] [C₃S₅²⁻ = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] was prepared by a reaction of [NMe₄]₂[C₃S₅] with [Ir(η⁵- C₅Me₅)Cl₂]₂ in ethanol. It was reacted with bromine to afford a paramagnetic species [IrBr(η⁵-C₅Me₅)(C₃S₅)] with the Ir-Br bond and in the one-electron-oxidized state, and a diamagnetic dinuclear species [IrBr(η⁵-C₅Me₅)(μ-C₂S₄)IrBr(η⁵-C₅Me₅)]. ESR spectra for the one-electron-oxidized species in solution are discussed. The X-ray crystal structural analysis for the latter complex revealed the geometry consisting of dinuclear IrBr(η⁵-C₅Me₅) moieties bridged by the C₂S₄²⁻ ligand.     

Metal-sulfur dπ-pπ buffering of the oxidations of metal-thiolate complexes: Photoelectron spectroscopy of (η-C5H5)Fe(CO)2SR (SR = SCH3, SBu) and (η-C5H5)Re(NO)(PR3)SCH3 (PR3 = PPr3, PPh3)

The metal-sulfur bonding present in the transition metal-thiolate complexes CpFe(CO)₂SCH₃, CpFe(CO)₂S^tBu, CpRe(NO)(PⁱPr₃)SCH₃, and CpRe(NO)(PPh₃)SCH₃ (Cp = η⁵-C₅H₅) is investigated via gas-phase valence photoelectron spectroscopy. For all four complexes a strong dπ-pπ interaction exists between a filled predominantly metal d orbital of the [CpML₂]⁺ fragment and the purely sulfur 3pπ lone pair of the thiolate. This interaction results in the highest occupied molecular orbital having substantial M-S π^∗ antibonding character. In the case of CpFe(CO)₂SCH₃, the first (lowest energy) ionization is from the Fe-S π^∗ orbital, the next two ionizations are from predominantly metal d orbitals, and the fourth ionization is from the Fe-S π orbital. The pure sulfur pπ lone pair of the thiolate fragment is less stable than the filled metal d orbitals of the [CpFe(CO)₂]⁺ fragment, resulting in a Fe-S π^∗ combination that is higher in sulfur character than the Fe-S π combination. Interestingly, substitution of a tert-butyl group for the methyl group on the thiolate causes little shift in the first ionization, in contrast to the shift observed for related thiols. This is a consequence of the delocalization and electronic buffering provided by the Fe-S dπ-pπ interaction. For CpRe(NO)(PⁱPr₃)SCH₃ and CpRe(NO)(PPh₃)SCH₃, the strong acceptor ability of the nitrosyl ligand rotates the metal orbitals for optimum backbonding to the nitrosyl, and the thiolate rotates along with these orbitals to a different preferred orientation from that of the Fe complexes. The initial ionization is again the M-S π^∗ combination with mostly sulfur character, but now has considerable mixing among several of the valence orbitals. Because of the high sulfur character in the HOMO, ligand substitution on the metal also has a small effect on the ionization energy in comparison to the shifts observed for similar substitutions in other molecules. These experiments show that, contrary to the traditional interpretation of oxidation of metal complexes, removal of an electron from these metal-thiolate complexes is not well represented by an increase in the formal oxidation state of the metal, nor by simple oxidation of the sulfur, but instead is a variable mix of metal and sulfur content in the highest occupied orbital.     

Reactivity of the bridged borylene complex [μ-BCl{η-C5H4Me)Mn(CO)2}2]

The reactivity of the bridged chloro borylene complex [μ-BCl{(η⁵-C₅H₄Me)Mn(CO)₂}₂] (2a) towards various protic reagents was studied. Reaction of 2a with isopropanol yielded the alkoxy borylene complex [μ-BOiPr{(η⁵-C₅H₄Me)Mn(CO)₂}₂] (3d) in very high yield. A further series of protic reagents HX (X=HS⁻, BF₄⁻, Co(CO)₄⁻) gave, in the presence of pyridine, the new amino borylene complex [1-(μ-B)-4-H-(NC₅H₅){(C₅H₄Me)Mn(CO)₂}₂] (5a), which represents the product of an unprecedented 1,4-hydroboration of pyridine. Complex 5a was fully characterised in solution by multinuclear NMR studies, in the solid state by X-ray diffraction, and was also subject to DFT-studies.     

Macropolyhedral boron-containing cluster chemistry: two-electron variations in intercluster bonding intimacy. Contrasting structures of 19-vertex [(η-C5Me5)HIrB18H19(PHPh2)] and [(η-C5Me5)IrB18H18(PH2Ph)]

Fused double-cluster [(η⁵-C₅Me₅)IrB₁₈H₁₈(PH₂Ph)] (8), from syn-[(η⁵-C₅Me₅)IrB₁₈H₂₀] (1) and PH₂Ph, retains the three-atoms-in-common cluster fusion intimacy of 1, in contrast to [(η⁵-C₅Me₅)HIrB₁₈H₁₉(PHPh₂)] (6), from PHPh₂ with 1, which exhibits an opening to a two atoms-in-common cluster fusion intimacy. Compound 8 forms via spontaneous dihydrogen loss from its precursor [(η⁵-C₅Me₅)HIrB₁₈H₁₉(PH₂Ph)] (7), which has two-atoms-in-common cluster-fusion intimacy and is structurally analogous to 6.     

Ethanol catalyzed synthesis of titanocene aryl carboxylate complexes and crystal structure of (η-C5H5)2Ti(2-OH-5-S-O2CC6H3)2

A method for the synthesis of titanocene (IV) aryl carboxylate complexes is presented in this paper. It is based on the fact that alcohol can catalyze the reaction between Cp₂TiCl₂ and aryl carboxylate ligands in the presence of sodium hydroxide (NaOH). The effects of the catalyst on the reaction system were studied and the possible reaction mechanism was proposed. This method was used to prepare a series of titanocene (IV) aryl carboxylate complexes and a macrocyclic titanocene (5,5′-dithiodisalicylato titanocene), whose structure was determined by X-ray diffraction analysis.     

Investigation into the reaction of (t-BuC5H4)2Nb(η-Te2)H with CH3Li: Hydride abstraction versus telluride methylation

The reaction of (Cp′ = t-BuC₅H₄) with CH₃Li in THF was examined by variable temperature ¹H NMR, ESR and mass spectroscopic means. From these methods it is evident that the diamagnetic compounds and as well as the paramagnetic compound form simultaneously. In the subsequent reaction of the intermediate solution with [Co₂(CO)₈] compound 4 was consumed and the compound (5) formed in good yield. Complex 5 was characterized by IR and variable temperature ¹H NMR spectroscopies. Electrochemical two-electron reduction of 1 leads, in a quasi-reversible process, to products that are not stable in solution.     

Synthesis, characterization and applications in ethylene polymerization of asymmetric ansa-titanocene complexes. Molecular structure of [Ti{Me2Si(η-C5Me4)(η-C5H3iPr)}Cl2]

The ansa-titanocene complexes, [Ti{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₃R)}Cl₂] (R = Me (5), iPr (6), tBu (7), SiMe₃ (8)), were obtained from the reaction of Li₂{Me₂Si(C₅Me₄)(C₅H₃R)} (R = Me (1), iPr (2), tBu (3), SiMe₃ (4)) with [TiCl₄(THF)₂], respectively. Compounds 5-8 have been tested as catalysts in the polymerization of ethylene and compared with the ansa-titanocene complexes [Ti{Me₂Si(η⁵-C₅H₄)₂}Cl₂] and [Ti{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂]. The resulting polyethylene showed molecular weights of about 200 000 g mol⁻¹ and polydispersity values of approximately 3. In addition, the molecular structure of 6 has been determined by single crystal X-ray diffraction studies.     

Influence of CH3 group of μ-N-C-S ligand on the properties of [Fe2(C4H5N2S)2(NO)4] complex

Bi-nuclear neutral sulfur-nitrosyl iron complex [Fe₂(SR)₂(NO)₄] (I) has been obtained by replacement of thiosulfate ligands in dianion [Fe₂(S₂O₃)₂(NO)₄]²⁻ by 1-methyl-imidazole-2-yl. From X-ray analysis data, the complex has centrosymmetrical dimeric structure, with the iron atoms being linked via μ-N-C-S bridge. From Mossbauer spectroscopy, isomeric shift δ_Fe is 0.180(1) mm/s and quadrupole splitting ΔE_Q is 0.928(2) mm/s at T = 290 K. By comparative studying the mass-spectra in the gaseous phase of solid samples decomposition and kinetics of NO release in 1% aqueous solutions of dimethylsulfoxide, using of the ligand with CH₃ substituent in position 1 of imidazole-2-thiol was shown to yield a more stable donor of nitrogen monoxide than earlier obtained analog with imidazole-2-thiol, [Fe₂(C₃H₃N₂S)₂(NO)₄].     

Coordination chemistry of half-open trozircenes: Adduct formation of [(η-C7H7)Zr(η-2,4-C7H11)] with isocyanides, phosphines and N-heterocyclic carbenes

The reactions of the half-open trozircene [(η⁷-C₇H₇)Zr(η⁵-2,4-C₇H₁₁)] (1) with the two-electron donor ligands tert-butyl isocyanide (CN-tBu), 1,2-bis(dimethylphosphino)ethane (dmpe), trimethylphosphine (PMe₃) and 1,3,4,5-tetramethylimidazolin-2-ylidene (IMe, :C[N(Me)C(Me)]₂) have led to the 1:1 adducts 3, 4, 5 and 6, respectively. The latter three were structurally characterized by X-ray diffraction analysis. Additionally, the stability of the adducts was probed by DFT calculations employing the B3LYP and M05-2X functionals showing that the strongly σ-basic N-heterocyclic carbene forms a thermodynamically much more stable adduct than the other three.     

Synthesis, spectroscopic and electrochemical characterization of water soluble [(η-C5H5)2Mo(thionucleobase/thionucleoside)]Cl2 complexes

A series of water soluble molybdenocene complexes of general formula [(η⁵-C₅H₅)₂Mo(L)]Cl₂ (L=6-mercaptopurine (2), 6-mercaptopurine ribose (3), 2-amino-6-mercaptopurine (4), 2-amino-6-mercaptopurine ribose (5)) have been prepared by reacting Cp₂MoCl₂ (1) with the corresponding thionucleobase/thionucleoside in a (2:1) THF/MeOH solvent mixture. The complexes have been characterized by spectroscopic methods (NMR, UV-Vis, IR and MS). ¹H NMR spectroscopic data (DMSO-d₆) on the complexes suggest a S-Mo-N(7) coordination by the thionucleobase/thionucleoside. In buffer solution NMR data suggest that the thionucleobase/thionucleoside remains coordinated to molybdenum probably through S(6) and assisted by either N(7) or N(1) atoms. Intermediate species such as [Cp₂Mo(η¹-L)(H₂O)]^2+/1+ where the L is acting as monodentate ligand are possible in solution. Electrochemical characterization has also been pursued by cyclic voltammetry in DMSO and buffer solution. In DMSO, the complexes including the molybdenocene dichloride exhibit reversible redox behavior. On the other hand, in buffer solution, the oxidation process is irreversible for all the species.     

Reactions of the borole complex CpRh(η-C4H4BPh) with monocationic organometallic fragments

The B-phenylborole complex CpRh(η⁵-C₄H₄BPh) (1) reacts with [ML]⁺ fragments to give the arene-type cationic complexes [CpRh(μ-η⁵:η⁶-C₄H₄BPh)ML]⁺ (ML = RuCp^∗ (3), Co(C₄Me₄) (4), Rh(cod) (5), and Ir(cod) (6)). Cation 4 undergoes a reversible rearrangement into the triple-decker complex [CpRh(μ-η⁵:η⁵-C₄H₄BPh)Co(C₄Me₄)]⁺ (7) under visible light irradiation in CH₂Cl₂ solution. DFT calculations revealed greater stability of arene-type complexes over triple-decker isomers. The structure of [3]BF₄ was determined by X-ray diffraction.     

Syntheses and structural analyses of chiral rhenium containing amines of the formula (η-C5H5)Re(NO)(PPh3)((CH2)nNRR′) (n = 0, 1)

The reaction of the racemic chiral methyl complex (η⁵-C₅H₅)Re(NO)(PPh₃)(CH₃) (1) with CF₃SO₃H and then NH₂CH₂C₆H₅ gives [(η⁵-C₅H₅)Re(NO)(PPh₃)(NH₂CH₂C₆H₅)]⁺ ([4a-H]⁺; 73%), and deprotonation with t-BuOK affords the amido complex (η⁵-C₅H₅)Re(NO)(PPh₃)(NHCH₂C₆H₅) (76%). Reactions of 1 with Ph₃C⁺ X⁻ and then primary or secondary amines give [(η⁵-C₅H₅)Re(NO)(PPh₃)(CH₂NHRR′)]⁺ X⁻ ([6-H]⁺ X⁻; R/R′/X = a, H/NH₂CH₂C₆H₅/BF₄; a′, H/NH₂CH₂C₆H₅/PF₆; b, H/NH₂CH₂(CH₂)₂CH₃/PF₆; c, H/(S)-NH₂CH(CH₃)C₆H₅/BF₄); d, CH₂CH₃/CH₂CH₃/PF₆; e, CH₂(CH₂)₂CH₃/CH₂(CH₂)₂CH₃/PF₆; f, CH₂C₆H₅/CH₂C₆H₅/PF₆; g, -CH₂(CH₂)₂CH₂-/PF₆; h, -CH₂(CH₂)₃CH₂-/PF₆; i, CH₃/CH₂CH₂OH/PF₆ (62-99%). Deprotonations with t-BuOK afford the amines (η⁵-C₅H₅)Re(NO)(PPh₃)(CH₂NRR′) (6a-i; 99-40%), which are more stable and isolated in analytically pure form when R ≠ H. Enantiopure 1 is used to prepare (R_ReS_C)-[6c-H]⁺, (R_ReS_C)-6c, (S)-[6g-H]⁺, and (S)-6g. The crystal structures of [4a-H]⁺, a previously prepared NH₂CH₂Si(CH₃)₃ analog, [6a′,d,f,h-H]⁺, (R_ReS_C)-6c, and 6f are determined and analyzed in detail, particularly with respect to cation/anion hydrogen bonding and conformation. In contrast to analogous rhenium containing phosphines, 6a-i show poor activities in reactions that are catalyzed by organic amines.