New construction for transversal design.

The study of gene functions requires the development of a DNA library of high quality through much of testing and screening. Pooling design is a mathematical tool to reduce the number of tests for DNA library screening. The transversal design is a special type of pooling design, which is good in implementation. In this paper, we present a new construction for transversal designs. We will also extend our construction to the error-tolerant case.     

Exome Sequencing from Nanogram Amounts of Starting DNA: Comparing Three Approaches

Hybridization-based target enrichment protocols require relatively large starting amounts of genomic DNA, which is not always available. Here, we tested three approaches to pre-capture library preparation starting from 10 ng of genomic DNA: (i and ii) whole-genome amplification of DNA samples with REPLI-g (Qiagen) and GenomePlex (Sigma) kits followed by standard library preparation, and (iii) library construction with a low input oriented ThruPLEX kit (Rubicon Genomics). Exome capture with Agilent SureSelect^XT2 Human AllExon v4+UTRs capture probes, and HiSeq2000 sequencing were performed for test libraries along with the control library prepared from 1 µg of starting DNA. Tested protocols were characterized in terms of mapping efficiency, enrichment ratio, coverage of the target region, and reliability of SNP genotyping. REPLI-g- and ThruPLEX-FD-based protocols seem to be adequate solutions for exome sequencing of low input samples.     

Partial uracil–DNA–glycosylase treatment for screening of ancient DNA

The challenge of sequencing ancient DNA has led to the development of specialized laboratory protocols that have focused on reducing contamination and maximizing the number of molecules that are extracted from ancient remains. Despite the fact that success in ancient DNA studies is typically obtained by screening many samples to identify a promising subset, ancient DNA protocols have not, in general, focused on reducing the time required to screen samples. We present an adaptation of a popular ancient library preparation method that makes screening more efficient. First, the DNA extract is treated using a protocol that causes characteristic ancient DNA damage to be restricted to the terminal nucleotides, while nearly eliminating it in the interior of the DNA molecules, allowing a single library to be used both to test for ancient DNA authenticity and to carry out population genetic analysis. Second, the DNA molecules are ligated to a unique pair of barcodes, which eliminates undetected cross-contamination from this step onwards. Third, the barcoded library molecules include incomplete adapters of short length that can increase the specificity of hybridization-based genomic target enrichment. The adapters are completed just before sequencing, so the same DNA library can be used in multiple experiments, and the sequences distinguished. We demonstrate this protocol on 60 ancient human samples.     

On the causes,consequences, and avoidance of PCR duplicates: Towards a theory of library complexity

Library preparation protocols for most sequencing technologies involve PCR amplification of the template DNA, which open the possibility that a given template DNA molecule is sequenced multiple times. Reads arising from this phenomenon, known as PCR duplicates, inflate the cost of sequencing and can jeopardize the reliability of affected experiments. Despite the pervasiveness of this artefact, our understanding of its causes and of its impact on downstream statistical analyses remains essentially empirical. Here, we develop a general quantitative model of amplification distortions in sequencing data sets, which we leverage to investigate the factors controlling the occurrence of PCR duplicates. We show that the PCR duplicate rate is determined primarily by the ratio between library complexity and sequencing depth, and that amplification noise (including in its dependence on the number of PCR cycles) only plays a secondary role for this artefact. We confirm our predictions using new and published RAD-seq libraries and provide a method to estimate library complexity and amplification noise in any data set containing PCR duplicates. We discuss how amplification-related artefacts impact downstream analyses, and in particular genotyping accuracy. The proposed framework unites the numerous observations made on PCR duplicates and will be useful to experimenters of all sequencing technologies where DNA availability is a concern.     

A cosmid vector for systematic chromosome walking

We describe the construction of a cosmid, LoristB, that contains SP6 and T7 phage-encoded RNA polymerase promoter sequences that are oriented towards and immediately adjacent to HindIII and BamHI cloning sites. We describe techniques for rapidly generating RNA probes from these promoters that must be complementary to the extreme left or right ends of the cloned DNA and can be used for library screening. Probe preparation requires neither prior knowledge of restriction sites nor fragment isolation. We also make extensive use of cos mapping restriction-mapping protocols that we have devised for our cosmid vectors for generation and alignment of steps in a cosmid walk.     

Solution-based targeted genomic enrichment for precious DNA samples

ABSTRACT: BACKGROUND: Solution-based targeted genomic enrichment (TGE) protocols permit selective sequencing of genomic regions of interest on a massively parallel scale. These protocols could be improved by: 1) modifying or eliminating time consuming steps; 2) increasing yield to reduce input DNA and excessive PCR cycling; and 3) enhancing reproducible. RESULTS: We developed a solution-based TGE method for downstream Illumina sequencing in a non-automated workflow, adding standard Illumina barcode indexes during the post-hybridization amplification to allow for sample pooling prior to sequencing. The method utilizes Agilent SureSelect baits, primers and hybridization reagents for the capture, off-the-shelf reagents for the library preparation steps, and adaptor oligonucleotides for Illumina paired-end sequencing purchased directly from an oligonucleotide manufacturing company. CONCLUSIONS: This solution-based TGE method for Illumina sequencing is optimized for small- or medium-sized laboratories and addresses the weaknesses of standard protocols by reducing the amount of input DNA required, increasing capture yield, optimizing efficiency, and improving reproducibility.     

A convenient and robust method for construction of combinatorial and random mutant libraries

Here we describe a convenient and robust ligase-independent method for construction of combinatorial and random mutant libraries. The homologous genes flanked by plasmid-derived DNA sequences are fragmented, and the random fragments are reassembled in a self-priming polymerase reaction to obtain chimeric genes. The product is then mixed with linearized vector and two pairs of flanking primers, followed by assembly of the chimeric genes and linearized vector by PCR to introduce recombinant plasmids of a combinatorial library. Commonly, it is difficult to find proper restriction sites during the construction of recombinant plasmids after DNA shuffling with multiple homologous genes. However, this disadvantage can be overcome by using the ligase-independent method because the steps of DNA digestion and ligation can be avoided during library construction. Similarly, DNA sequences with random mutations introduced by error-prone PCR can be used to construct recombinant plasmids of a random mutant library with this method. Additionally, this method can meet the needs of large and comprehensive DNA library construction.     

Extraction of high-quality genomic DNA from latex-containing plants

The isolation of intact, high-molecular-mass genomic DNA is essential for many molecular biology applications including long PCR, endonuclease restriction digestion, Southern blot analysis, and genomic library construction. Many protocols are available for the extraction of DNA from plant material. However, for latex-containing Asteraceae (Cichorioideae) species, standard protocols and commercially available kits do not produce efficient yields of high-quality amplifiable DNA. A cetyltrimethylammonium bromide protocol has been optimized for isolation of genomic DNA from latex-containing plants. Key steps in the modified protocol are the use of etiolated leaf tissue for extraction and an overnight 25 degrees C isopropanol precipitation step. The purified DNA has excellent spectral qualities, is efficiently digested by restriction endonucleases, and is suitable for long-fragment PCR amplification.     

A Bumpy Ride on the Diagnostic Bench of Massive Parallel Sequencing,the Case of the Mitochondrial Genome

The advent of massive parallel sequencing (MPS) has revolutionized the field of human molecular genetics, including the diagnostic study of mitochondrial (mt) DNA dysfunction. The analysis of the complete mitochondrial genome using MPS platforms is now common and will soon outrun conventional sequencing. However, the development of a robust and reliable protocol is rather challenging. A previous pilot study for the re-sequencing of human mtDNA revealed an uneven coverage, affecting predominantly part of the plus strand. In an attempt to address this problem, we undertook a comparative study of standard and modified protocols for the Ion Torrent PGM system. We could not improve strand representation by altering the recommended shearing methodology of the standard workflow or omitting the DNA polymerase amplification step from the library construction process. However, we were able to associate coverage bias of the plus strand with a specific sequence motif. Additionally, we compared coverage and variant calling across technologies. The same samples were also sequenced on a MiSeq device which showed that coverage and heteroplasmic variant calling were much improved.     

PFunkel: Efficient,Expansive, User-Defined Mutagenesis

We introduce PFunkel, a versatile method for extensive, researcher-defined DNA mutagenesis using a ssDNA or dsDNA template. Once the template DNA is prepared, the method can be completed in a single day in a single tube, and requires no intermediate DNA purification or sub-cloning. PFunkel can be used for site-directed mutagenesis at an efficiency approaching 100%. More importantly, PFunkel allows researchers the unparalleled ability to efficiently construct user-defined libraries. We demonstrate the creation of a library with site-saturation at four distal sites simultaneously at 70% efficiency. We also employ PFunkel to create a comprehensive codon mutagenesis library of the TEM-1 ß-lactamase gene. We designed this library to contain 18,081 members, one for each possible codon substitution in the gene (287 positions in TEM-1 x 63 possible codon substitutions). Deep sequencing revealed that ∼97% of the designed single codon substitutions are present in the library. From such a library we identified 18 previously unreported adaptive mutations that each confer resistance to the ß-lactamase inhibitor tazobactam. Three of these mutations confer resistance equal to or higher than that of the most resistant reported TEM-1 allele and have the potential to emerge clinically.     

Construction of a long hairpin RNA expression library using Cre recombinase

A large number of genome-wide screens using RNA interference (RNAi) libraries have been utilized to determine the function of individual gene products involved in a variety of biological processes. In this study, we describe a new method to enzymatically generate a long hairpin RNA (lhRNA) expression library from a cDNA plasmid library using a nicking endonuclease, BcaBEST DNA polymerase, and Cre recombinase without excising the inserted DNA fragment from the plasmid vector. This method involves 5 steps: (1) conversion of an inserted DNA fragment in a plasmid into a direct repeat (DR); (2) purification of the plasmid containing the DR; (3) subcloning a lox71 cassette into the plasmid; (4) conversion of the DR in the plasmid into an inverted repeat (IR) using Cre recombinase; and (5) purification of the plasmid containing the IR. We also established an efficient method for inserting DNase I-digested DNA fragments into expression plasmids to enable construction of a cDNA plasmid library suitable as source materials to construct the lhRNA expression library. We confirmed that each of the lhRNA expression plasmids constructed using this method induced strong RNAi in a silkworm cell line, NIAS-Bm-oyanagi2.     

一种快速简便构建DNA病毒测序文库的方法

为了对1株中国棉铃虫核型多角体缺失病毒HZ-9进行基因组测序,采用了一种新的方法,通过超声波振断HaBacHZ9细菌人工染色体质粒（bacterial artificial chromosome plasmid,Bacmid）基因组DNA,用Taq酶在DNA片段两端加腺噤呤A,胶回收后得到预期的1—2kb的DNA片段,然后与pGEM-Teasy载体连接,构建了中国棉铃虫缺失病毒HaBacHZ9的亚克隆文库。结果随机挑选10个克隆子酶切分析,显示9个克隆子有1500bp左右的插入片断,并对HaBaeHZ9进行了全基因组测序。结论成功构建了HaBaeHZ9的DNA测序文库,为HZ-9功能基因组学研究奠定了基础,这是一种简单快速的构建DNA病毒测序文库的方法。     

An empirical method for the evaluation of the quality of genomic DNA libraries.

An empirical method is presented that enables one to determine, with only a relatively small investment of time and materials, whether a lambda genomic DNA library will be a productive source of clones carrying specific sequences. The method provides an indication of the abundance of the sequences in library DNA and indicates whether major DNA rearrangements have occurred during library construction and amplification.     

Utilizing field collected insects for next generation sequencing: Effects of sampling,storage, and DNA extraction methods

DNA sequencing technologies continue to advance the biological sciences, expanding opportunities for genomic studies of non‐model organisms for basic and applied questions. Despite these opportunities, many next generation sequencing protocols have been developed assuming a substantial quantity of high molecular weight DNA (>100 ng), which can be difficult to obtain for many study systems. In particular, the ability to sequence field‐collected specimens that exhibit varying levels of DNA degradation remains largely unexplored. In this study we investigate the influence of five traditional insect capture and curation methods on Double‐Digest Restriction Enzyme Associated DNA (ddRAD) sequencing success for three wild bee species. We sequenced a total of 105 specimens (between 7–13 specimens per species and treatment). We additionally investigated how different DNA quality metrics (including pre‐sequence concentration and contamination) predicted downstream sequencing success, and also compared two DNA extraction methods. We report successful library preparation for all specimens, with all treatments and extraction methods producing enough highly reliable loci for population genetic analyses. Although results varied between species, we found that specimens collected by net sampling directly into 100% EtOH, or by passive trapping followed by 100% EtOH storage before pinning tended to produce higher quality ddRAD assemblies, likely as a result of rapid specimen desiccation. Surprisingly, we found that specimens preserved in propylene glycol during field sampling exhibited lower‐quality assemblies. We provide recommendations for each treatment, extraction method, and DNA quality assessment, and further encourage researchers to consider utilizing a wider variety of specimens for genomic analyses.     

A simple method for DNA extraction from marine bacteria that produce extracellular materials

We present a simple method for extracting DNA from the marine bacteria Hahella chejuensis, a Streptomyces sp., and a Cytophaga sp. Previously, DNA purification from these strains was hindered by the presence of extracellular materials. In our extraction method, the marine bacteria are lysed by freezing and grinding in liquid nitrogen, and treated with SDS. The extracted DNA is purified using a phenol/chloroform mixture, and precipitated in isopropanol. The extracted DNA is of high quality and suitable for molecular analyses, such as PCR, restriction enzyme digestion, genomic DNA blot hybridization, and genomic DNA library construction. We used this method to extract genomic DNA from several other marine bacteria. Our method is a reproducible, simple, and rapid technique for routine DNA extractions from marine bacteria. Furthermore, the low cost of this method makes it attractive for large-scale studies.     

Paired-End Sequencing of Long-Range DNA Fragments for De Novo Assembly of Large,Complex Mammalian Genomes by Direct Intra-Molecule Ligation

Background

The relatively short read lengths from next generation sequencing (NGS) technologies still pose a challenge for de novo assembly of complex mammal genomes. One important solution is to use paired-end (PE) sequence information experimentally obtained from long-range DNA fragments (>1 kb). Here, we characterize and extend a long-range PE library construction method based on direct intra-molecule ligation (or molecular linker-free circularization) for NGS.

Results

We found that the method performs stably for PE sequencing of 2- to 5- kb DNA fragments, and can be extended to 10–20 kb (and even in extremes, up to ∼35 kb). We also characterized the impact of low quality input DNA on the method, and develop a whole-genome amplification (WGA) based protocol using limited input DNA (<1 µg). Using this PE dataset, we accurately assembled the YanHuang (YH) genome, the first sequenced Asian genome, into a scaffold N50 size of >2 Mb, which is over100-times greater than the initial size produced with only small insert PE reads(17 kb). In addition, we mapped two 7- to 8- kb insertions in the YH genome using the larger insert sizes of the long-range PE data.

Conclusions

In conclusion, we demonstrate here the effectiveness of this long-range PE sequencing method and its use for the de novo assembly of a large, complex genome using NGS short reads.     

A scalable, fully automated process for construction of sequence-ready barcoded libraries for 454

We present an automated, high throughput library construction process for 454 technology. Sample handling errors and cross-contamination are minimized via end-to-end barcoding of plasticware, along with molecular DNA barcoding of constructs. Automation-friendly magnetic bead-based size selection and cleanup steps have been devised, eliminating major bottlenecks and significant sources of error. Using this methodology, one technician can create 96 sequence-ready 454 libraries in 2 days, a dramatic improvement over the standard method.