Most-Probable-Number Rapid Viability PCR method to detect viable spores of Bacillus anthracis in swab samples

A comparison of Most-Probable-Number Rapid Viability (MPN RV) PCR and traditional culture methods for the quantification of Bacillus anthracis Sterne spores in macrofoam swabs from a multi-center validation study was performed. The purpose of the study was to compare environmental swab processing methods for recovery, detection, and quantification of viable B. anthracis spores from surfaces. Results show that spore numbers provided by the MPN RV-PCR method were typically within 1-log of the values from a plate count method for all three levels of spores tested (3.1 × 10⁴, 400, and 40 spores sampled from surfaces with swabs) even in the presence of debris. The MPN method tended to overestimate the expected result, especially at lower spore levels. Blind negative samples were correctly identified using both methods showing a lack of cross contamination. In addition to detecting low levels of spores in environmental conditions, the MPN RV-PCR method is specific, and compatible with automated high-throughput sample processing and analysis protocols, enhancing its utility for characterization and clearance following a biothreat agent release.     

A Novel Multiplex PCR Discriminates Bacillus anthracis and Its Genetically Related Strains from Other Bacillus cereus Group Species

Anthrax is an important zoonotic disease worldwide that is caused by Bacillus anthracis, a spore-forming pathogenic bacterium. A rapid and sensitive method to detect B. anthracis is important for anthrax risk management and control in animal cases to address public health issues. However, it has recently become difficult to identify B. anthracis by using previously reported molecular-based methods because of the emergence of B. cereus, which causes severe extra-intestinal infection, as well as the human pathogenic B. thuringiensis, both of which are genetically related to B. anthracis. The close genetic relation of chromosomal backgrounds has led to complexity of molecular-based diagnosis. In this study, we established a B. anthracis multiplex PCR that can screen for the presence of B. anthracis virulent plasmids and differentiate B. anthracis and its genetically related strains from other B. cereus group species. Six sets of primers targeting a chromosome of B. anthracis and B. anthracis-like strains, two virulent plasmids, pXO1 and pXO2, a bacterial gene, 16S rRNA gene, and a mammalian gene, actin-beta gene, were designed. The multiplex PCR detected approximately 3.0 CFU of B. anthracis DNA per PCR reaction and was sensitive to B. anthracis. The internal control primers also detected all bacterial and mammalian DNAs examined, indicating the practical applicability of this assay as it enables monitoring of appropriate amplification. The assay was also applied for detection of clinical strains genetically related to B. anthracis, which were B. cereus strains isolated from outbreaks of hospital infections in Japan, and field strains isolated in Zambia, and the assay differentiated B. anthracis and its genetically related strains from other B. cereus group strains. Taken together, the results indicate that the newly developed multiplex PCR is a sensitive and practical method for detecting B. anthracis.     

Virulence plasmid stability in environmentally occurring <Emphasis Type="Italic">Bacillus anthracis</Emphasis> from North East Turkey

The Bacillus anthracis virulence plasmid pXO2, which encodes for a polypeptide capsule, can be lost during long term laboratory storage. To determine if pXO2 is lost in nature we screened B. anthracis isolates obtained from B. anthracis spores from contaminated animal burial sites in Turkey for their ability to express a capsule upon primary culture. A total of 672 B. anthracis colonies were examined of which ten produced a mixed mucoid (capsule +ve)/non-mucoid (capsule ?ve) phenotype and a further one colony yielded non-mucoid colonies upon repeated culture. Screening by PCR using pXO2 specific primers revealed that seven of these isolates had eliminated the plasmid. Of the four colonies which were positive by PCR, one regained the ability to express a capsule upon repeated culture suggesting that the defect was reversible. This is an important observation as capsule expression is a principal marker of virulence and in the absence of PCR serves as a key diagnostic marker. The results of this preliminary study suggest that pXO2 is lost in nature and that further studies are need to determine the mechanisms by which this occurs.     

Effects of Long-Term Storage on Plasmid Stability in Bacillus anthracis

The plasmid profiles of 619 cultures of Bacillus anthracis which had been isolated and stored between 1954 and 1989 were analyzed using the Laboratory Response Network real-time PCR assay targeting a chromosomal marker and both virulence plasmids (pXO1 and pXO2). The cultures were stored at ambient temperature on tryptic soy agar slants overlaid with mineral oil. When data were stratified by decade, there was a decreasing linear trend in the proportion of strains containing both plasmids with increased storage time (P < 0.001). There was no significant difference in the proportion of strains containing only pXO1 or strains containing only pXO2 (P = 0.25), but there was a statistical interdependence between the two plasmids (P = 0.004). Loss of viability of B. anthracis cultures stored on agar slants is also discussed.     

Evaluation of the Cepheid GeneXpert system for detecting Bacillus anthracis

AIMS: The Cepheid GeneXpert is a four-site, automated sample preparation and real-time PCR detection system. In this study, the capability of the GeneXpert to isolate and detect nucleic acid from Bacillus anthracis Ames spores was assessed. METHODS AND RESULTS: A four-plex, dried-down bead cartridge containing PCR reagents specific for the pXO1 and pXO2 plasmids as well as sample processing and inhibition controls was evaluated. For B. anthracis Ames spores harbouring pXO1 and pXO2, samples containing 68 CFU per ml (148 spores per ml) were positive in all four replicates. A limited cross-reactivity panel, which included closely related Bacillus species, was also tested to determine the specificity of the pXO1 and pXO2 assays. No cross-reactivity occurred. Further, B. anthracis Sterne spore samples were analysed to compare results when processed using the GeneXpert to those run directly on the Cepheid SmartCycler without sample processing. The GeneXpert detection capability was three logs lower than the SmartCycler indicating the benefit of incorporating a nucleic acid extraction procedure. CONCLUSIONS: This study demonstrates that the GeneXpert is a rapid and reliable system for simultaneously detecting the B. anthracis virulence plasmids pXO1 and pXO2. SIGNIFICANCE AND IMPACT OF THE STUDY: The GeneXpert is the only platform currently available that is capable of both nucleic acid purification and real-time PCR detection enclosed within a single system. Further, all sample manipulations are automated, thus reducing errors associated with manual processing.     

Development and validation of a real-time quantitative PCR assay for rapid identification of Bacillus anthracis in environmental samples

A real-time polymerase chain reaction (PCR) assay was developed for rapid identification of Bacillus anthracis in environmental samples. These samples often harbor Bacillus cereus bacteria closely related to B. anthracis, which may hinder its specific identification by resulting in false positive signals. The assay consists of two duplex real-time PCR: the first PCR allows amplification of a sequence specific of the B. cereus group (B. anthracis, B. cereus, Bacillus thuringiensis, Bacillus weihenstephanensis, Bacillus pseudomycoides, and Bacillus mycoides) within the phosphoenolpyruvate/sugar phosphotransferase system I gene and a B. anthracis specific single nucleotide polymorphism within the adenylosuccinate synthetase gene. The second real-time PCR assay targets the lethal factor gene from virulence plasmid pXO1 and the capsule synthesis gene from virulence plasmid pXO2. Specificity of the assay is enhanced by the use of minor groove binding probes and/or locked nucleic acids probes. The assay was validated on 304 bacterial strains including 37 B. anthracis, 67 B. cereus group, 54 strains of non-cereus group Bacillus, and 146 Gram-positive and Gram-negative bacteria strains. The assay was performed on various environmental samples spiked with B. anthracis or B. cereus spores. The assay allowed an accurate identification of B. anthracis in environmental samples. This study provides a rapid and reliable method for improving rapid identification of B. anthracis in field operational conditions.     

Evaluation of a rapid and inexpensive liquid culture system for the detection of Mycobacterium avium subsp. paratuberculosis in bovine faeces

Mycobacterium avium subsp. paratuberculosis (MAP) is the etiologic agent of paratuberculosis, a chronic granulomatous enteric disease of ruminants. MAP detection by faecal culture provides the definitive diagnosis of the infection. Automated liquid systems for MAP culture are more sensitive and rapid than culture on solid media, but they are expensive and require specialised equipment. In this study, a non-automated culture method using a modified Middlebrook 7H9 liquid medium (7H9+) was compared with Herrold's solid medium (HEYM) and direct real-time PCR on dairy cattle faeces. MAP growth in 7H9+ was monitored weekly by real-time PCR until the 12th week post-inoculation. The analytical sensitivity of the three methods was evaluated using faecal samples from a healthy cow spiked with ten-fold dilutions of MAP organisms (10⁴-10^− 1) and naturally MAP-infected faeces serially diluted 1 to 10 in negative faecal samples. The limits of detection of the solid culture and direct real-time PCR were 10² and 10³ MAP/g, respectively. In comparison, the 7H9+ culture revealed as few as 1 MAP/g. A marked reduction in time to detection of the pathogen, compared with HEYM culture, was obtained. In addition, the three methods were applied to environmental faecal samples collected from a high- and a low-prevalence herd. The culture in 7H9+ showed to be the most sensitive test in the low-prevalence herd and provided faster results than HEYM. In the high-prevalence herd the three methods showed the same sensitivity and the real-time PCR had the shortest turnaround time. In conclusion, the use of 7H9+ for MAP-detection from cattle faeces maximizes diagnostic sensitivity and reduces turnaround time and, therefore, could replace culture in solid medium. Hence, we propose a two-step protocol for the assessment of MAP faecal excretion based on: 1) direct real-time PCR on all samples; and 2) inoculation of negative samples into 7H9+ and analysis after 3 and, if necessary, 6 weeks by real-time PCR.     

Optimal swab processing recovery method for detection of bioterrorism-related Francisella tularensis by real-time PCR

Francisella tularensis, the etiological agent of tularemia, is regarded as a potential bioterrorism agent. The advent of bioterrorism has heightened awareness of the need for validated methods for processing environmental samples. In this study we determined the optimal method for processing environmental swabs for the recovery and subsequent detection of F. tularensis by the use of real-time PCR assays. Four swab processing recovery methods were compared: heat, sonication, vortexing, and the Swab Extraction Tube System (SETS). These methods were evaluated using cotton, foam, polyester and rayon swabs spiked with six pathogenic strains of F. tularensis. Real-time PCR analysis using a multi-target 5′nuclease assay for F. tularensis showed that the use of the SETS method resulted in the best limit of detection when evaluated using multiple strains of F. tularensis. We demonstrated also that the efficiency of F. tularensis recovery from swab specimens was not equivalent for all swab processing methodologies and, thus, that this variable can affect real-time PCR assay sensitivity. The effectiveness of the SETS method was independent of the automated DNA extraction method and real-time PCR platforms used. In conclusion, diagnostic laboratories can now potentially incorporate the SETS method into specimen processing protocols for the rapid and efficient detection of F. tularensis by real-time PCR during laboratory bioterrorism-related investigations.     

Optimal Use of MRSASelect and PCR to Maximize Sensitivity and Specificity of MRSA Detection

Suspected colonies of methicillin-resistant Staphylococcus aureus (MRSA) on chromogenic, MRSASelect (BioRad) medium were confirmed using routine microbiological methods, and a multiplex real-time PCR (n = 108). Although the specificity of MRSASelect assessed at 24 h of incubation was much higher than that of 48 h (91.4 vs. 60 %), extending the incubation time to 48 h, along with PCR confirmation, increased the total number of true positive samples by 27.8 %. These results provide a cost effective method for sensitive and specific detection of MRSA.     

Bacillus anthracis physiology and genetics

Bacillus anthracis is a member of the Bacillus cereus group species (also known as the “group 1 bacilli”), a collection of Gram-positive spore-forming soil bacteria that are non-fastidious facultative anaerobes with very similar growth characteristics and natural genetic exchange systems. Despite their close physiology and genetics, the B. cereus group species exhibit certain species-specific phenotypes, some of which are related to pathogenicity. B. anthracis is the etiologic agent of anthrax. Vegetative cells of B. anthracis produce anthrax toxin proteins and a poly-d-glutamic acid capsule during infection of mammalian hosts and when cultured in conditions considered to mimic the host environment. The genes associated with toxin and capsule synthesis are located on the B. anthracis plasmids, pXO1 and pXO2, respectively. Although plasmid content is considered a defining feature of the species, pXO1- and pXO2-like plasmids have been identified in strains that more closely resemble other members of the B. cereus group. The developmental nature of B. anthracis and its pathogenic (mammalian host) and environmental (soil) lifestyles of make it an interesting model for study of niche-specific bacterial gene expression and physiology.     

Trapped in keratin; a comparison of dermatophyte detection in nail, skin and hair samples directly from clinical samples using culture and real-time PCR

Traditionally, laboratory detection and identification of dermatophytes consists of culture and microscopy which yields results within approximately 2-6 weeks. In 2007 our medical microbiological diagnostic laboratory implemented a molecular method for the detection of dermatophytes. A real-time PCR assay was developed which simultaneously detects and identifies the most prevalent dermatophytes directly in nail, skin and hair samples and has a turnaround time of less than two days. For 1437 clinical samples, received by our diagnostic laboratory, we compared the results obtained from both culture and real-time PCR. This study showed that real-time PCR significantly increased the detection rate of dermatophytes compared to culture. Furthermore, excellent concordance between culture and real-time PCR identification was achieved.     

A simple and sensitive method for detection of Bacillus anthracis by loop‐mediated isothermal amplification

Aims: To develop a rapid and simple system for detection of Bacillus anthracis using a loop‐mediated isothermal amplification (LAMP) method and determine the suitability of LAMP for rapid identification of B. anthracis infection. Methods and Results: A specific LAMP assay targeting unique gene sequences in the bacterial chromosome and two virulence plasmids, pXO1 and pXO2, was designed. With this assay, it was possible to detect more than 10 fg of bacterial DNA per reaction and obtain results within 30–40 min under isothermal conditions at 63°C. No cross‐reactivity was observed among Bacillus cereus group and other Bacillus species. Furthermore, in tests using blood specimens from mice inoculated intranasally with B. anthracis spores, the sensitivity of the LAMP assay following DNA extraction methods using a Qiagen DNeasy kit or boiling protocol was examined. Samples prepared by both methods showed almost equivalent sensitivities in LAMP assay. The detection limit was 3·6 CFU per test. Conclusions: The LAMP assay is a simple, rapid and sensitive method for detecting B. anthracis. Significance and Impact of the Study: The LAMP assay combined with boiling extraction could be used as a simple diagnostic method for identification of B. anthracis infection.     

DNA sequence conservation between the Bacillus anthracis pXO2 plasmid and genomic sequence from closely related bacteria

Background  

Complete sequencing and annotation of the 96.2 kb Bacillus anthracis plasmid, pXO2, predicted 85 open reading frames (ORFs). Bacillus cereus and Bacillus thuringiensis isolates that ranged in genomic similarity to B. anthracis, as determined by amplified fragment length polymorphism (AFLP) analysis, were examined by PCR for the presence of sequences similar to 47 pXO2 ORFs.     

Sensitive and rapid quantitative detection of anthrax spores isolated from soil samples by real-time PCR

Quantitative analysis of anthrax spores from environmental samples is essential for accurate detection and risk assessment since Bacillus anthracis spores have been shown to be one of the most effective biological weapons. Using TaqMan real-time PCR, specific primers and probes were designed for the identification of pathogenic B. anthracis strains from pag gene and cap gene on two plasmids, pXO1 and pXO2, as well as a sap gene encoded on the S-layer. To select the appropriate lysis method of anthrax spore from environmental samples, several heat treatments and germination methods were evaluated with multiplex-PCR. Among them, heat treatment of samples suspended with sucrose plus non-ionic detergent was considered an effective spore disruption method because it detected up to 10(5) spores/g soil by multiplex-PCR. Serial dilutions of B. anthracis DNA and spore were detected up to a level of 0.1 ng/ microliters and 10 spores/ml, respectively, at the correlation coefficient of 0.99 by real-time PCR. Quantitative analysis of anthrax spore could be obtained from the comparison between C(T) value and serial dilutions of soil sample at the correlation coefficient of 0.99. Additionally, spores added to soil samples were detected up to 10(4) spores/g soil within 3 hr by real-time PCR. As a consequence, we established a rapid and accurate detection system for environmental anthrax spores using real-time PCR, avoiding time and labor-consuming preparation steps such as enrichment culturing and DNA preparation.     

Legionella Confirmation Using Real-Time PCR and SYTO9 Is an Alternative to Current Methodology

The currently accepted culture techniques for the detection of Legionella spp. in water samples (AS/NZS 3896:1998 and ISO 11731 standard methods) are slow and laborious, requiring from 7 to 14 days for a result. We describe a fully validated rapid confirmation technique that uses real-time PCR incorporating the intercalating dye SYTO9 for the direct identification of primary cultures, significantly decreasing turnaround time and allowing faster remedial action to be taken by the industry.     

A Real-Time PCR Assay for the Detection of Campylobacter jejuni in Foods after Enrichment Culture

A real-time PCR assay was developed for the quantitative detection of Campylobacter jejuni in foods after enrichment culture. The specificity of the assay for C. jejuni was demonstrated with a diverse range of Campylobacter species, related organisms, and unrelated genera. The assay had a linear range of quantification over six orders of magnitude, and the limit of detection was approximately 12 genome equivalents. The assay was used to detect C. jejuni in both naturally and artificially contaminated food samples. Ninety-seven foods, including raw poultry meat, offal, raw shellfish, and milk samples, were enriched in blood-free Campylobacter enrichment broth at 37°C for 24 h, followed by 42°C for 24 h. Enrichment cultures were subcultured to Campylobacter charcoal-cefoperazone-deoxycholate blood-free selective agar, and presumptive Campylobacter isolates were identified with phenotypic methods. DNA was extracted from enrichment cultures with a rapid lysis method and used as the template in the real-time PCR assay. A total of 66 samples were positive for C. jejuni by either method, with 57 samples positive for C. jejuni by subculture to selective agar medium and 63 samples positive in the real-time PCR assay. The results of both methods were concordant for 84 of the samples. The total time taken for detection from enrichment broth samples was approximately 3 h for the real-time PCR assay, with the results being available immediately at the end of PCR cycling, compared to 48 h for subculture to selective agar. This assay significantly reduces the total time taken for the detection of C. jejuni in foods and is an important model for other food-borne pathogens.     

A sensitive,specific and reproducible real-time polymerase chain reaction method for detection of Plasmodium vivax and Plasmodium falciparum infection in field-collected anophelines

We describe a simple method for detection of Plasmodium vivax and Plasmodium falciparum infection in anophelines using a triplex TaqMan real-time polymerase chain reaction (PCR) assay (18S rRNA). We tested the assay on Anopheles darlingi and Anopheles stephensi colony mosquitoes fed with Plasmodium-infected blood meals and in duplicate on field collected An. darlingi. We compared the real-time PCR results of colony-infected and field collected An. darlingi, separately, to a conventional PCR method. We determined that a cytochrome b-PCR method was only 3.33% as sensitive and 93.38% as specific as our real-time PCR assay with field-collected samples. We demonstrate that this assay is sensitive, specific and reproducible.     

Identification of Three Noncontiguous Regions on Bacillus anthracis Plasmid pXO1 That Are Important for Its Maintenance

Bacillus anthracis pXO1 minireplicon (MR) plasmid consisting of open reading frames (ORFs) GBAA_pXO1_0020 to GBAA_pXO1_0023 is not stably maintained in B. anthracis, whereas the full-size parent pXO1 plasmid (having 181,677 bp and 217 ORFs) is extremely stable under the same growth conditions. Two genetic tools developed for DNA manipulation in B. anthracis (Cre-loxP and Flp-FRT systems) were used to identify pXO1 regions important for plasmid stability. We localized a large segment of pXO1 that enables stable plasmid maintenance during vegetative growth. Further genetic analysis identified three genes that are necessary for pXO1 maintenance: amsP (GBAA_pXO1_0069), minP (GBAA_pXO1_0082), and sojP (GBAA_pXO1_0084). Analysis of conserved domains in the corresponding proteins indicated that only AmsP (activator of maintenance system of pXO1) is predicted to bind DNA, due to its strong helix-turn-helix domain. Two conserved domains were found in the MinP protein (Min protein from pXO1): an N-terminal domain having some similarity to the B. anthracis septum site-determining protein MinD and a C-terminal domain that resembles a baculovirus single-stranded-DNA-binding protein. The SojP protein (Soj from pXO1) contains putative Walker box motifs and belongs to the ParA family of ATPases. No sequences encoding other components of type I plasmid partition systems, namely, cis-acting centromere parS and its binding ParB protein, were identified within the pXO1 genome. A model describing the role of the MinP protein in pXO1 distribution between daughter cells is proposed.