Structural comparison of recombinant human macrophage colony stimulating factor beta and a partially reduced derivative using hydrogen deuterium exchange and electrospray ionization mass spectrometry

Hydrogen deuterium exchange, monitored by electrospray ionization mass spectrometry, has been employed to characterize structural features of a derivative of recombinant human macrophage colony stimulating factor beta (rhm-CSFbeta) in which two of the nine disulfide bridges (Cys157/Cys159-Cys'157/Cys'159) were selectively reduced and alkylated. Removal of these two disulfide bridges did not affect the biological activity of the protein. Similarities between CD and fluorescence spectra for rhm-CSFbeta and its derivative indicate that removing the disulfide bonds did not strongly alter the overall three-dimensional structure of rhm-CSFbeta. However, differences between deuterium exchange data of the intact proteins indicate that more NHs underwent fast deuterium exchange in the derivative than in rhm-CSFbeta. Regions located near the disulfide bond removal site were shown to exhibit faster deuterium exchange behavior in the derivative than in rhm-CSFbeta.     

Dynamics and thermodynamic properties of CXCL7 chemokine

Chemokines form a family of signaling proteins mainly responsible for directing the traffic of leukocytes, where their biological activity can be modulated by their oligomerization state. We characterize the dynamics and thermodynamic stability of monomer and homodimer structures of CXCL7, one of the most abundant platelet chemokines, using experimental methods that include circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy, and computational methods that include the anisotropic network model (ANM), molecular dynamics (MD) simulations and the distance constraint model (DCM). A consistent picture emerges for the effects of dimerization and Cys5‐Cys31 and Cys7‐Cys47 disulfide bonds formation. The presence of disulfide bonds is not critical for maintaining structural stability in the monomer or dimer, but the monomer is destabilized more than the dimer upon removal of disulfide bonds. Disulfide bonds play a key role in shaping the characteristics of native state dynamics. The combined analysis shows that upon dimerization flexibly correlated motions are induced between the 30s and 50s loop within each monomer and across the dimer interface. Interestingly, the greatest gain in flexibility upon dimerization occurs when both disulfide bonds are present, and the homodimer is least stable relative to its two monomers. These results suggest that the highly conserved disulfide bonds in chemokines facilitate a structural mechanism that is tuned to optimally distinguish functional characteristics between monomer and dimer. Proteins 2015; 83:1987–2007. © 2015 Wiley Periodicals, Inc.     

Disulfide-linked dimers of human adrenaline synthesizing enzyme PNMT are catalytically active

The crystal structure of human phenylethanolamine N-methyltransferase (hPNMT) reveals a disulfide-linked dimer, despite the presence of reducing agent in the crystallisation conditions. By removing the reducing agent, hPNMT crystals grow more rapidly and at lower protein concentrations. However, it was unclear whether the disulfide bonds are only present in the crystal form or whether these affect enzyme activity. The solution oligomeric state of hPNMT was investigated using biochemical techniques and activity assays. We found that in the absence of reducing agent, hPNMT forms dimers in solution. Furthermore, the solution dimer of hPNMT incorporates disulfide bonds, since this form is sensitive to reducing agent. The C48A and C139A mutants of hPNMT, which are incapable of forming the disulfide bond observed in the crystal structure, have a decreased propensity to form dimer in solution. Those dimers that do form are also sensitive to reducing agent. Further, the C48A/C139A double mutant shows only monomeric behaviour. Both dimeric and monomeric hPNMT, as well as mutants have wildtype enzyme activity. These results show that a variety of disulfides, including those observed in the crystal structure, can form in solution. In addition, disulfide-linked dimers are as active as the monomeric enzyme indicating that the crystal structure of the protein is a valid target for inhibitor design.     

A study of intermediates involved in the folding pathway for recombinant human macrophage colony-stimulating factor (M-CSF): evidence for two distinct folding pathways.

The folding pathway for a 150-amino acid recombinant form of the dimeric cytokine human macrophage colony-stimulating factor (M-CSF) has been studied. All 14 cysteine residues in the biologically active homodimer are involved in disulfide linkages. The structural characteristics of folding intermediates blocked with iodoacetamide reveal a rapid formation of a small amount of a non-native dimeric intermediate species followed by a slow progression via both monomeric and dimeric intermediates to the native dimer. The transition from monomer to fully folded dimer is complete within 25 h at room temperature at pH 9.0. The blocked intermediates are stable under conditions of sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and thus represent various dimeric and folded monomeric species of the protein with different numbers of disulfide bridges. Peptide mapping and electrospray ionization mass spectrometry revealed that a folded monomeric species of M-CSF contained three of the four native disulfide bridges, and this folded monomer also showed some biological activity in a cell-based assay. The results presented here strongly suggest that M-CSF can fold via two different pathways, one involving monomeric intermediates and another involving only dimeric intermediates.     

Dissociation of intermolecular disulfide bonds in P22 tailspike protein intermediates in the presence of SDS

Each chain of the native trimeric P22 tailspike protein has eight cysteines that are reduced and buried in its hydrophobic core. However, disulfide bonds have been observed in the folding pathway and they are believed to play a critical role in the registration of the three chains. Interestingly, in the presence of sodium dodecyl sulfate (SDS) only monomeric chains, rather than disulfide-linked oligomers, have been observed from a mixture of folding intermediates. Here we show that when the oligomeric folding intermediates were separated from the monomer by native gel electrophoresis, the reduction of intermolecular disulfide bonds did not occur in the subsequent second-dimension SDS-gel electrophoresis. This result suggests that when tailspike monomer is present in free solution with SDS, the partially unfolded tailspike monomer can facilitate the reduction of disulfide bonds in the tailspike oligomers.     

Domain swapping of CD4 upon dimerization

It has recently been shown that disulfide bond Cys130-Cys159 in domain 2 of monomeric CD4 is involved in the formation of CD4 disulfide-bonded dimers on cell surfaces and that it can influence the permissiveness of cells to HIV infection. Because this disulfide bond is buried in the monomer, a large conformational change must take place in order to allow for such disulfide exchange. Using standard optimization techniques, whose efficiency was first checked in the well-documented CD2 case, we have shown that 3D domain swapping is a likely candidate for the conformational change, the hinge loop, or linker, being loop E-F. Indeed, as a consequence of domain swapping, because Cys130 and Cys159 belong to beta-strands C and F, respectively, two disulfide bonds become established between Cys130 in one monomer and Cys159 in the other one. Such a disulfide exchange has already been observed when the nuclear magnetic resonance (NMR) structure of the prion protein was compared to the crystallographic, dimeric one. In both cases, domain swapping implies disulfide exchange because the linker is located in the sequence between two disulfide-bonded cysteines. As in the CD2 case, the proposed configuration of the CD4 dimer is found as a pair of neighboring monomers in the crystallographic unit cell. Moreover, because in this configuration the epitope of monoclonal antibody MT151, which does not compete with Gp120 for CD4 binding, is in the cleft between the pair of CD4 monomers, it is suggested that MT151 achieves its HIV-blocking activity by interfering with the formation of CD4 domain-swapped dimers on cell surface.     

Rough energy landscapes in protein folding: dimeric E. coli Trp repressor folds through three parallel channels

The folding mechanism of the dimeric Escherichia coli Trp repressor (TR) is a kinetically complex process that involves three distinguishable stages of development. Following the formation of a partially folded, monomeric ensemble of species, within 5 ms, folding to the native dimer is controlled by three kinetic phases. The rate-limiting step in each phase is either a non-proline isomerization reaction or a dimerization reaction, depending on the final denaturant concentration. Two approaches have been employed to test the previously proposed folding mechanism of TR through three parallel channels: (1) unfolding double-jump experiments demonstrate that all three folding channels lead directly to native dimer; and (2) the differential stabilization of the transition state for the final step in folding and the native dimer, by the addition of salt, shows that all three channels involve isomerization of a dimeric species. A refined model for the folding of Trp repressor is presented, in which all three channels involve a rapid dimerization reaction between partially folded monomers followed by the isomerization of the dimeric intermediates to yield native dimer. The ensemble of partially folded monomers can be captured at equilibrium by low pH; one-dimensional proton NMR spectra at pH 2.5 demonstrate that monomers exist in two distinct, slowly interconverting conformations. These data provide a potential structural explanation for the three-channel folding mechanism of TR: random association of two different monomeric forms, which are distinguished by alternative packing modes of the core dimerization domain and the DNA-binding, helix-turn-helix, domain. One, perhaps both, of these packing modes contains non-native contacts.     

Pathway of oxidative folding of alpha-lactalbumin: a model for illustrating the diversity of disulfide folding pathways

The pathway of oxidative folding of alpha-lactalbumin (alpha LA) (four disulfide bonds) has been characterized by structural and kinetic analysis of the acid-trapped folding intermediates. In the absence of calcium, oxidative folding of alpha LA proceeds through highly heterogeneous species of one-, two-, three-, and four-disulfide (scrambled) intermediates to reach the native structure. In the presence of calcium, the folding intermediates of alpha LA comprise two predominant isomers (alpha LA-IIA and alpha LA-IIIA) adopting exclusively native disulfide bonds, including the two disulfide bonds (Cys(61)-Cys(77) and Cys(73)-Cys(91)) located within the beta-sheet calcium binding domain. alpha LA-IIA is a two-disulfide species consisting of Cys(61)-Cys(77) and Cys(73)-Cys(91) disulfide bonds. alpha LA-IIIA contains Cys(61)-Cys(77), Cys(73)-Cys(91), and Cys(28)-Cys(111) disulfide bonds. The underlying mechanism of the contrasting folding pathways of calcium-bound and calcium-depleted alpha LA is congruent with the cause of diversity of disulfide folding pathways observed among many well-characterized three-disulfide proteins, including bovine pancreatic trypsin inhibitor and hirudin. Our study also reveals novel aspects of the folding mechanism of alpha LA that have not been described previously.     

Crystal structure of a dimeric oxidized form of human peroxiredoxin 5

Peroxiredoxin 5 is the last discovered mammalian member of an ubiquitous family of peroxidases widely distributed among prokaryotes and eukaryotes. Mammalian peroxiredoxin 5 has been recently classified as an atypical 2-Cys peroxiredoxin due to the presence of a conserved peroxidatic N-terminal cysteine (Cys47) and an unconserved resolving C-terminal cysteine residue (Cys151) forming an intramolecular disulfide intermediate in the oxidized enzyme. We have recently reported the crystal structure of human peroxiredoxin 5 in its reduced form. Here, a new crystal form of human peroxiredoxin 5 is described at 2.0 A resolution. The asymmetric unit contains three polypeptide chains. Surprisingly, beside two reduced chains, the third one is oxidized although the enzyme was crystallized under initial reducing conditions in the presence of 1 mM 1,4-dithio-dl-threitol. The oxidized polypeptide chain forms an homodimer with a symmetry-related one through intermolecular disulfide bonds between Cys47 and Cys151. The formation of these disulfide bonds is accompanied by the partial unwinding of the N-terminal parts of the alpha2 helix, which, in the reduced form, contains the peroxidatic Cys47 and the alpha6 helix, which is sequentially close to the resolving residue Cys151. In each monomer of the oxidized chain, the C-terminal part including the alpha6 helix is completely reorganized and is isolated from the rest of the protein on an extended arm. In the oxidized dimer, the arm belonging to the first monomer now appears at the surface of the second subunit and vice versa.     

Evidence for the underlying cause of diversity of the disulfide folding pathway

The pathways of oxidative folding of disulfide proteins exhibit a high degree of diversity, which is illustrated by the varied extent of (a) the heterogeneity of folding intermediates, (b) the predominance of intermediates containing native disulfide bonds, and (c) the level of accumulation of fully oxidized scrambled isomers as intermediates. BPTI and hirudin exemplify two extreme cases of such divergent folding pathways. We previously proposed that the underlying cause of this diversity is associated with the degree of stability of protein subdomains. Here we present compelling evidence that substantiates this hypothesis by studying the folding pathway of alphaLA-IIA. alphaLA-IIA is a partially folded intermediate of alpha-lactalbumin (alphaLA). It comprises a structured beta-sheet (calcium-binding) domain linked by two native disulfide bonds (Cys(61)-Cys(77) and Cys(73)-Cys(91)) and a disordered alpha-helical domain with four free cysteines (Cys(6), Cys(28), Cys(111), and Cys(120)). Purified alphaLA-IIA was allowed to refold without and with stabilization of its structured beta-sheet domain by calcium. In the absence of calcium, the folding pathway of alphaLA-IIA resembles that of hirudin, displaying a highly heterogeneous population of folding intermediates, including fully oxidized scrambled species. Upon stabilization of its beta-sheet domain by bound calcium, oxidative folding of alphaLA-IIA undergoes a pathway conspicuously similar to that of BPTI, exhibiting limited species of folding intermediates containing mostly native disulfide bonds.     

Selective reduction of seminal ribonuclease by glutathione

Incubation of seminal ribonuclease with glutathione leads to the formation of a monomeric species which exhibits twice the specific activity of the native dimer. The monomer was found to possess two mixed disulfides of glutathione at residues 31 and 32, the residues ordinarily involved in the intermolecular disulfide bonds linking the subunits of the native dimer. Formation of the monomer results in only minor changes in the far ultraviolet circular dichroism spectra. The rate of the glutathione-facilitated dissociation reaction is fairly slow, requiring 60 min for completion. Attempts to dimerize the monomer all failed, implying that the dissociation reaction is irreversible. The glutathione reduced monomer was compared with the monomer formed during the regeneration of reduced, denatured bovine seminal ribonuclease in the presence of glutathione. By all criteria examined, the two monomeric forms are identical. It is concluded that the mixed disulfide monomer is the favored form of the enzyme in the presence of glutathione.     

Roles of dimerization in folding and stability of ketosteroid isomerase from Pseudomonas putida biotype B

Equilibrium and kinetic analyses have been performed to elucidate the roles of dimerization in folding and stability of KSI from Pseudomonas putida biotype B. Folding was reversible in secondary and tertiary structures as well as in activity. Equilibrium unfolding transition, as monitored by fluorescence and ellipticity measurements, could be modeled by a two-state mechanism without thermodynamically stable intermediates. Consistent with the two-state model, one dimensional (1D) NMR spectra and gel-filtration chromatography analysis did not show any evidence for a folded monomeric intermediate. Interestingly enough, Cys 81 located at the dimeric interface was modified by DTNB before unfolding. This inconsistent result might be explained by increased dynamic motion of the interface residues in the presence of urea to expose Cys 81 more frequently without the dimer dissociation. The refolding process, as monitored by fluorescence change, could best be described by five kinetic phases, in which the second phase was a bimolecular step. Because <30% of the total fluorescence change occurred during the first step, most of the native tertiary structure may be driven to form by the bimolecular step. During the refolding process, negative ellipticity at 225 nm increased very fast within 80 msec to account for >80% of the total amplitude. This result suggests that the protein folds into a monomer containing most of the alpha-helical structures before dimerization. Monitoring the enzyme activity during the refolding process could estimate the activity of the monomer that is not fully active. Together, these results stress the importance of dimerization in the formation and maintenance of the functional native tertiary structure.     

Apple four in human blood coagulation factor XI mediates dimer formation.

Human blood coagulation factor XI is a dimer composed of two identical subunits. Each subunit contains four apple domains as tandem repeats followed by a serine protease region. A disulfide bridge between Cys321 of each fourth apple domain links the subunits together. The role of Cys321 in the dimerization of factor XI was examined by mutagenesis followed by expression of its cDNA in baby hamster kidney cells. The recombinant proteins were then purified from the tissue culture medium and shown to have full biological activity. Normal recombinant factor XI was secreted as a dimer as determined by SDS-PAGE, while recombinant factor XI-Cys321 Ser migrated as a monomer under these conditions. Gel filtration studies, however, revealed that each protein existed as a dimer under native conditions, indicating that the disulfide bond between Cys321 of each factor XI monomer was not necessary for dimer formation. The fourth apple domain (apple4) of factor XI was then introduced into tissue plasminogen activator (tPA) to investigate its role in the dimerization of other polypeptide chains. The fusion protein, containing apple4 (apple4-tPA), formed dimers as detected by SDS-PAGE and gel filtration. Furthermore, dimerization was specific to apple4, while apple3 had no effect on dimerization. These data further indicated that the apple4 domain of factor XI mediates dimerization of the two subunits and the interchain disulfide bond involving Cys321 was not essential for dimer formation.     

Protein disulfide isomerase isomerizes non-native disulfide bonds in human proinsulin independent of its peptide-binding activity

Protein disulfide isomerase (PDI) supports proinsulin folding as chaperone and isomerase. Here, we focus on how the two PDI functions influence individual steps in the complex folding process of proinsulin. We generated a PDI mutant (PDI-aba'c) where the b' domain was partially deleted, thus abolishing peptide binding but maintaining a PDI-like redox potential. PDI-aba'c catalyzes the folding of human proinsulin by increasing the rate of formation and the final yield of native proinsulin. Importantly, PDI-aba'c isomerizes non-native disulfide bonds in completely oxidized folding intermediates, thereby accelerating the formation of native disulfide bonds. We conclude that peptide binding to PDI is not essential for disulfide isomerization in fully oxidized proinsulin folding intermediates.     

Folding and oxidation of recombinant human granulocyte colony stimulating factor produced in Escherichia coli. Characterization of the disulfide-reduced intermediates and cysteine----serine analogs.

The folding and oxidation of recombinant human granulocyte colony-stimulating factor solubilized from Escherichia coli inclusion bodies was investigated. During the folding process, two intermediates, I1 and I2, were detected by kinetic studies using high performance liquid chromatography. I1 exists transiently and disappears quickly with the concomitant formation of I2. In contrast, I2 requires a longer time to fold into the final oxidized form, N. CuSO4 catalysis increases the folding rate of I2 from I1, while CuSO4 and elevated temperature (37 degrees C) have a dramatic effect on the folding rate of N from I2. These observations suggest the following sequential oxidative folding pathway. [sequence: see text] Peptide map analysis of the iodoacetate-labeled intermediates revealed that I1 represents the fully reduced granulocyte colony-stimulating factor containing 5 free cysteines; I2 is the partially oxidized species containing a single Cys36-Cys42 disulfide bond; and N, the final folded form, has two disulfide bonds. The physicochemical properties and biological activities of I1, I2, N, and several Cys----Ser analogs made by site-directed mutagenesis were further investigated. In guanidine hydrochloride-induced denaturation studies, the disulfide-reduced intermediates and the analogs missing either of the disulfide bonds are conformationally less stable than those of the wild type molecule or the analog with the free Cys at position 17 changed to Ser. Recombinant human granulocyte colony stimulating factor lacking either disulfide bond or both has overall secondary and tertiary structures different from those of the wild type molecule and exhibits lower biological activity. These studies show that disulfide bond formation is crucial for maintaining the molecule in a properly folded and biologically active form.     

Intermediates control domain swapping during folding of p13suc1

The 13-kDa protein p13(suc1) has two folded states, a monomer and a structurally similar domain-swapped dimer formed by exchange of a beta-strand. The refolding reaction of p13(suc1) is multiphasic, and in this paper we analyze the kinetics as a function of denaturant and protein concentration and compare the behavior of wild type and a set of mutants previously designed with dimerization propensities that span 9 orders of magnitude. We show that the folding reactions of wild type and all mutants produce the monomer predominantly despite their very different equilibrium behavior. However, the addition of low concentrations of denaturant in the refolding buffer leads to thermodynamic control of the folding reaction with products that correspond to the wild type and mutant equilibrium dimerization propensities. We present evidence that the kinetic control in the absence of urea arises because of the population of the folding intermediates. Intermediates are usually considered to be detrimental to folding because they slow down the reaction; however, our work shows that intermediates buffer the monomeric folding pathway against the effect of mutations that favor the nonfunctional, dimeric state at equilibrium.     

Disulfide bond rearrangement during formation of the chorionic gonadotropin beta-subunit cystine knot in vivo

The intracellular kinetic folding pathway of the human chorionic gonadotropin beta-subunit (hCG-beta) reveals the presence of a disulfide between Cys residues 38-57 that is not detected by X-ray analysis of secreted hCG-beta. This led us to propose that disulfide rearrangement is an essential feature of cystine knot formation during CG-beta folding. To test this, we used disulfide bond formation to monitor progression of intracellular folding intermediates of a previously uncharacterized protein, the CG-beta subunit of cynomolgous macaque (Macaca fascicularis). Like its human counterpart hCG-beta with which it shares 81% identity, macaque (m)CG-beta is a cystine knot-containing subunit that assembles with an alpha-subunit common to all glycoprotein hormone members of its species to form a biologically active heterodimer, mCG, which, like hCG, is required for pregnancy maintenance. An early mCG-beta folding intermediate, mpbeta1, contained two disulfide bonds, one between Cys34 and Cys88 and the other between Cys38 and Cys57. The subsequent folding intermediate, mpbeta2-early, was represented by an ensemble of folding forms that, in addition to the two disulfides mentioned above, included disulfide linkages between Cys9 and Cys57 and between Cys38 and Cys90. These latter two disulfides are those contained within the beta-subunit cystine knot and reveal that a disulfide exchange occurred during the mpbeta2-early folding step leading to formation of the mCG-beta knot. Thus, while defining the intracellular kinetic protein folding pathway of a monkey homologue of CG-beta, we detected the previously predicted disulfide exchange event crucial for CG-beta cystine knot formation and attainment of CG-beta assembly competence.     

Folding and assembly kinetics of procaspase‐3

Caspases are vital to apoptosis and exist in the cell as inactive zymogens. Dimerization is central to procaspase activation because the active sites are comprised of loops from both monomers. Although initiator procaspases are stable monomers until activated on cell death scaffolds, the effector caspases, such as procaspase-3, are stable dimers. The activation mechanisms are reasonably well understood in terms of polypeptide chain cleavage and subsequent active site rearrangements in the dimer, but the mechanisms that govern dimer assembly are not known. To further understand procaspase dimerization, we examined the folding and assembly of procaspase-3 by fluorescence emission, circular dichroism, differential quenching by acrylamide, anisotropy, and enzyme activity assays. Single-mixing stopped-flow refolding studies showed a complex burst phase in which multiple monomeric species form rapidly. At longer times, the monomer folds through several intermediates, some of which appear to be off-pathway or misfolded, before eventually forming a dimerization-competent species. Enzyme activity studies demonstrated a slow rate of dimerization (∼70 M⁻¹ s⁻¹). In addition, single-mixing stopped-flow unfolding studies revealed a complex unfolding process with a slow rate of dimer dissociation. Interestingly, multiple dimeric species were observed in the burst phase for unfolding, suggesting that the native ensemble consists of at least two major conformations. Collectively, these results demonstrate complex folding and unfolding behavior for procaspase-3 and suggest that slow dimerization results from the lack of stabilizing native contacts in the initial encounter complex.     

A major kinetic trap for the oxidative folding of human epidermal growth factor

The folding pathway of human epidermal growth factor (EGF) has been characterized by structural and kinetic analysis of the acid-trapped folding intermediates. Oxidative folding of the fully reduced EGF proceeds through 1-disulfide intermediates and accumulates rapidly as a single stable 2-disulfide intermediate (designated as EGF-II), which represents up to more than 85% of the total protein along the folding pathway. Among the five 1-disulfide intermediates that have been structurally characterized, only one is native, and nearly all of them are bridges by neighboring cysteines. Extensive accumulation of EGF-II indicates that it accounts for the major kinetic trap of EGF folding. EGF-II contains two of the three native disulfide bonds of EGF, Cys(14)-Cys(31) and Cys(33)-Cys(42). However, formation of the third native disulfide (Cys(6)-Cys(20)) for EGF-II is slow and does not occur directly. Kinetic analysis reveals that an important route for EGF-II to reach the native structure is via rearrangement pathway through 3-disulfide scrambled isomers. The pathway of EGF-II to attain the native structure differs from that of three major 2-disulfide intermediates of bovine pancreatic trypsin inhibitor (BPTI). The dissimilarities of folding mechanism(s) between EGF, BPTI, and hirudin are discussed in this paper.     

Study of a major intermediate in the oxidative folding of leech carboxypeptidase inhibitor: contribution of the fourth disulfide bond

The oxidative folding pathway of leech carboxypeptidase inhibitor (LCI; four disulfide bonds) proceeds through the formation of two major intermediates (III-A and III-B) that contain three native disulfide bonds and act as strong kinetic traps in the folding process. The III-B intermediate lacks the Cys19-Cys43 disulfide bond that links the beta-sheet core with the alpha-helix in wild-type LCI. Here, an analog of this intermediate was constructed by replacing Cys19 and Cys43 with alanine residues. Its oxidative folding follows a rapid sequential flow through one, two, and three disulfide species to reach the native form; the low accumulation of two disulfide intermediates and three disulfide (scrambled) isomers accounts for a highly efficient reaction. The three-dimensional structure of this analog, alone and in complex with carboxypeptidase A (CPA), was determined by X-ray crystallography at 2.2A resolution. Its overall structure is very similar to that of wild-type LCI, although the residues in the region adjacent to the mutation sites show an increased flexibility, which is strongly reduced upon binding to CPA. The structure of the complex also demonstrates that the analog and the wild-type LCI bind to the enzyme in the same manner, as expected by their inhibitory capabilities, which were similar for all enzymes tested. Equilibrium unfolding experiments showed that this mutant is destabilized by approximately 1.5 kcal mol(-1) (40%) relative to the wild-type protein. Together, the data indicate that the fourth disulfide bond provides LCI with both high stability and structural specificity.