A novel nanocomposite film prepared from crosslinked cellulosic whiskers

Cellulose whiskers are increasingly being used as a reinforcing phase in polymer systems and their use is a growing area of importance in bionanocomposite research. Although the reinforcing effect of cellulose whiskers has been studied in various polymers, the impact of crosslinking cellulose whiskers has not been explored so far. This work deals with the development of novel cellulose nanocomposites, wherein the cellulose nanowhiskers are crosslinked with poly(methyl vinyl ether-co-maleic acid) and poly(ethylene glycol). The morphology of the nanocomposite was studied using atomic force microscopy (AFM), which revealed a network structure embedded in a continuous phase. The water sorption studies demonstrated that the crosslinked nanocomposites are capable of absorbing up to ～900% water and have potential to be used as hydrogels.     

Atomic force microscopy of pollen grains,cellulose microfibrils,and protoplasts

Summary Atomic force microscopy (AFM) holds unique prospects for biological microscopy, such as nanometer resolution and the possibility of measuring samples in (physiological) solutions. This article reports the results of an examination of various types of plant material with the AFM. AFM images of the surface of pollen grains ofKalanchoe blossfeldiana andZea mays were compared with field emission scanning electron microscope (FESEM) images. AFM reached the same resolutions as FESEM but did not provide an overall view of the pollen grains. Using AFM in torsion mode, however, it was possible to reveal differences in friction forces of the surface of the pollen grains. Cellulose microfibrils in the cell wall of root hairs ofRaphanus sativus andZ. mays were imaged using AFM and transmission electron microscopy (TEM). Imaging was performed on specimens from which the wall matrix had been extracted. The cell wall texture of the root hairs was depicted clearly with AFM and was similar to the texture known from TEM. It was not possible to resolve substructures in a single microfibril. Because the scanning tip damaged the fragile cells, it was not possible to obtain images of living protoplasts ofZ. mays, but images of fixed and dried protoplasts are shown. We demonstrate that AFM of plant cells reaches resolutions as obtained with FESEM and TEM, but obstacles still have to be overcome before imaging of living protoplasts in physiological conditions can be realized.Abbreviations AFM atomic force microscope - FESEM field emission scanning electron microscope - PyMS pyrolysis mass spectrometry - TEM transmission electron microscope     

Chlorine-free extraction of cellulose from rice husk and whisker isolation

This work reports the isolation of cellulose whiskers from rice husk (RH) by means of an environmental friendly process for cellulose extraction and bleaching. The multistep process begins with the removal of pectin, cutin, waxes and other extractives from rice husk, then an alkaline treatment for the removal of hemicelluloses and lignin, and a two-step bleaching with hydrogen peroxide/tetra-acetylethylenediamine (TAED), followed by a mixture of acetic and nitric acids, for further delignification of the cellulose pulp. The techniques of infrared absorption spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), modulated differential scanning calorimetry (MDSC) and X-ray diffraction (XRD) showed that the overall process is adequate to obtain cellulose with high purity and crystallinity. This cellulose was submitted to sulfuric acid hydrolysis with the aim to isolate the whiskers. They showed the typical elongated rod-like aspect as revealed by transmission electron microscopy (TEM) and atomic force microscopy (AFM).     

The shape and size distribution of crystalline nanoparticles prepared by acid hydrolysis of native cellulose

The shape and size distribution of crystalline nanoparticles resulting from the sulfuric acid hydrolysis of cellulose from cotton, Avicel, and tunicate were investigated using transmission electron microscopy (TEM) and atomic force microscopy (AFM) as well as small- and wide-angle X-ray scattering (SAXS and WAXS). Images of negatively stained and cryo-TEM specimens showed that the majority of cellulose particles were flat objects constituted by elementary crystallites whose lateral adhesion was resistant against hydrolysis and sonication treatments. Moreover, tunicin whiskers were described as twisted ribbons with an estimated pitch of 2.4-3.2 microm. Length and width distributions of all samples were generally well described by log-normal functions, with the exception of tunicin, which had less lateral aggregation. AFM observation confirmed that the thickness of the nanocrystals was almost constant for a given origin and corresponded to the crystallite size measured from peak broadening in WAXS spectra. Experimental SAXS profiles were numerically simulated, combining the dimensions and size distribution functions determined by the various techniques.     

High performance edible nanocomposite films containing bacterial cellulose nanocrystals

Bacterial cellulose obtained from Gluconacetobacter xylinus in the form of long fibers were acid hydrolyzed under controlled conditions to obtain cellulose nanocrystals. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) confirmed the formation of rod like cellulose nanocrystals having an average diameter and length of 20 ± 5 nm and 290 ± 130 nm respectively. These nanocrystals were used to prepare gelatin nanocomposite films and characterized for elucidating its performance. The formation of percolated networks of cellulose nanocrystals within gelatin matrix resulted in improving the mechanical properties of nanocomposites. The moisture sorption and water vapor permeability (WVP) studies revealed that the addition of cellulose nanocrystals reduced the moisture affinity of gelatin, which is very favorable for edible packaging applications. Results of this study demonstrated the use of bacterial cellulose nanocrystals (BCNCs) in the fabrication of edible, biodegradable and high-performance nanocomposite films for food packaging applications at relatively low cost.     

Fine structure of cell wall surfaces in the giant-cellular xanthophycean alga <Emphasis Type="Italic">Vaucheria terrestris</Emphasis>

The mechanical strength of cell walls in the tip-growing cells of Vaucheria terrestris is weakened by treatment with proteolytic enzymes. To clarify the morphological characteristics of the components maintaining cell wall strength, the fine structures of the cell walls, with and without protease treatment, were observed by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Observations indicated that cellulose microfibrils were arranged in random directions and overlapped each other. Most of the microfibrils observed in the inner surface of the cell wall were embedded in amorphous materials, whereas in the outer surface of the cell wall, microfibrils were partially covered by amorphous materials. The matrix components embedding and covering microfibrils were almost completely removed by protease treatment, revealing layers of naked microfibrils deposited deeply in the cell wall. Topographic data taken from AFM observations provided some additional information that could not be obtained by TEM, including more detailed images of the granular surface textures of the matrix components and the detection of microfibrils in the interior of the cell wall. In addition, quantitative AFM data of local surface heights enabled us to draw three-dimensional renderings and to quantitatively estimate the extent of the exposure of microfibrils by the enzymatic treatment.     

Kinetic characterization of amyloid-beta 1-42 aggregation with a multimethodological approach

Extensive evidence suggests that the self-assembly of amyloid-beta peptide (Aβ) is a nucleation-dependent process that involves the formation of several oligomeric intermediates. Despite neuronal toxicity being recently related to Aβ soluble oligomers, results from aggregation studies are often controversial, mainly because of the low reproducibility of several experimental protocols. Here a multimethodological study that included atomic force microscopy (AFM), transmission electron microscopy (TEM), fluorescence microscopy (FLM), mass spectrometry techniques (matrix-assisted laser desorption/ionization time-of-flight [MALDI–TOF] and electrospray ionization quadrupole time-of-flight [ESI–QTOF]), and direct thioflavin T (ThT) fluorescence spectroscopy were enabled to set up a reliable and highly reproducible experimental protocol for the characterization of the morphology and dimension of Aβ 1–42 (Aβ42) aggregates along the self-assembly pathway. This multimethodological approach allowed elucidating the diverse assembly species formed during the Aβ aggregation process and was applied to the detailed investigation of the mechanism of Aβ42 inhibition by myricetin. In particular, a very striking result was the molecular weight determination of the initial oligomeric nuclei by MALDI–TOF, composed of up to 10 monomers, and their morphology by AFM.     

Direct observation of defect structure in protein crystals by atomic force and transmission electron microscopy.

We have examined the structure of S-layers isolated from Sulfolobus acidocaldarius using atomic force microscopy (AFM) and transmission electron microscopy (TEM). From the AFM images, we were able to directly observe individual dimers of the crystal, defects in the crystal structure, and twin boundaries. We have identified two types of boundaries, one defined by a mirror plane and the other by a glide plane. This work shows that twin boundaries are highly structured regions that are directly related to the organization of units within each crystal domain. Projection maps from TEM images have shown that there are significant differences in the final average maps has allowed us to relate high magnification views obtained by AFM to the relatively high resolution information obtained by electron microscopy and image processing.     

Electrospun poly(lactic acid)/chitosan core-shell structure nanofibers from homogeneous solution

The core-shell structure nanofibers of poly(lactic acid)/chitosan with different weight ratios were successfully electrospun from homogeneous solution. The preparation process was more simple and effective than double-needle electrospinning. The nanofibers were obtained with chitosan in shell while poly(lactic acid) in core attributing to phase separation, which were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). The electrospun nanofibrous membrane was evaluated in vitro by using mouse fibroblasts (L929) as reference cell lines. Cell culture results indicated that these materials were good in promoting cell growth and attachment, thus they could be used for tissue engineering and wound healing dressing.     

Applications of field emission scanning electron microscopy to polymer membrane research

The recent development of ultra-high resolution field emission scanning electron microscopy has opened exciting new opportunities in many scientific and engineering applications at the molecular scale. It overcomes the instrumentation limitations of low resolution in SEM and uncertainty in TEM due to artifacts imposed by sample preparation.Applications of field emission scanning electron microscopy (FESEM) to polymer membrane research such as studies of surface morphology of finely porous membranes and mechanisms of membrane fouling are illustrated with examples. The advantages of the technique, especially the low voltage requirements of FESEM for surface observation, are also discussed in comparison with TEM (replica) and conventional SEM.     

Formulation, characterization, and in vitro evaluation of quantum dots loaded in poly(lactide)-vitamin E TPGS nanoparticles for cellular and molecular imaging

We developed a novel system of poly(lactide acid)-d-alpha-tocopheryl polyethylene glycol 1000 succinate (PLA-TPGS) nanoparticles (NPs) for quantum dots (QDs) formulation to improve imaging effects and reduce side effects as well as to promote a sustainable imaging. The QDs-loaded PLA-TPGS NPs were prepared by a modified solvent extraction/evaporation method, which were then characterized by laser light scattering (LLS) for size and size distribution; field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and transmission electron microscope (TEM) for surface morphology. Surface chemistry of the QDs-loaded PLA-TPGS NPs was analyzed by X-ray photoelectron microscopy (XPS) and Fourier transform infra-red spectroscopy (FTIR). Encapsulation efficiency of the QDs in the polymeric nanoparticles was measured by inductively coupled plasma optical emission spectrometry (ICP-OES). The photostability of the QDs formulated in the PLA-TPGS nanoparticles was investigated as changes in the florescence intensity versus the irradiation time. Confocal laser scanning microscopy (CLSM) was used to image the cellular uptake of the QDs-loaded NPs by MCF-7 cells. Methylthiazolyldiphenyl-tetrazolium (MTT) assay was employed to assess the viability of MCF-7 cells incubated with the QDs formulated by the PLA-TPGS NPs versus the mercaptoacetic acid (MAA)-coated QDs. It was found that the QDs formulated in the PLA-TPGS NPs can result in higher fluorescence intensity and higher photostability than the bare QDs as well as lower cytotoxicity than the MAA-coated QDs.     

Preparation and characterization of bionanocomposite fiber based on cellulose and nano-SiO2 using ionic liquid

Microcrystalline cellulose (MCC)/nano-SiO₂ composite fibers were processed from solutions in 1-allyl-3-methylimidazolium chloride (AMIMCl) by the method of dry-jet wet spinning. The oscillatory shear measurements demonstrated that the gel network formed above 10 wt% nano-SiO₂ and the complex viscosity increased with increasing nano-SiO₂. Remarkably, the shear viscosity of the nanofluids was even lower than solutions without nano-SiO₂ under high shear rates. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images revealed that well-dispersed particles exhibit strong interfacial interactions with cellulose matrix. Measurements on wide-angle X-ray diffraction (WAXD) indicated that the regenerated cellulose and nanocomposite fibers were the typical cellulose II crystalline form, which was different from the native cellulose with the polymorph of Type I. The tensile strength of the nanocomposite fibers was larger than that of pure cellulose fiber and showed a tendency to increase and then decrease with increasing nano-SiO₂. Furthermore, the nanocomposite fibers exhibited improved thermal stability.     

The antithrombogenic potential of a polyhedral oligomeric silsesquioxane (POSS) nanocomposite

We have developed a nanocomposite using a silica nanocomposite polyhedral oligomeric silsesquioxane (POSS) and poly(carbonate-urea)urethane (PCU) for potential use in cardiovascular bypass grafts and the microvascular component of artificial capillary beds. In this study, we sought to compare its antithrombogenicity to that of conventional polymers used in vascular bypass grafts so as to improve upon current patency rates, particularly in the microvascular setting. Using atomic force microscopy (AFM) and transmission electron microscopy (TEM), surface topography and composition were studied, respectively. The ability of the nanocomposite surface to repel both proteins and platelets in vitro was assessed using thromboelastography (TEG), fibrinogen ELISA assays, antifactor Xa assays, scanning electron microscopy (SEM), and platelet adsorption tests. TEG analysis showed a significant decrease in clot strength (one-way ANOVA, p < 0.001) and increase in clot lysis (one-way ANOVA, p < 0.0001) on the nanocomposite when compared to both poly(tetrafluoroethylene) (PTFE) and PCU. ELISA assays indicate lower adsorption of fibrinogen to the nanocomposite compared to PTFE (one-way ANOVA, p < 0.01). Interestingly, increasing the concentration of POSS nanocages within these polymers was shown to proportionately inhibit factor X activity. Platelet adsorption at 120 min was also lower compared to PTFE and PCU (two-way ANOVA, p < 0.05). SEM images showed a "speckled" morphologic pattern with Cooper grades I platelet adsorption morphology on the nanocomposite compared to PTFE with grade IV morphology. On the basis of these results, we concluded that POSS nanocomposites possess greater thromboresistance than PTFE and PCU, making it an ideal material for the construction of both bypass grafts and microvessels.     

Crab shell chitin whiskers reinforced natural rubber nanocomposites. 3. Effect of chemical modification of chitin whiskers

The purpose of this study was to chemically modify the surface of chitin whiskers and to investigate the effect of the incorporation of these modified whiskers into a natural rubber (NR) matrix on the properties of the ensuing nanocomposite. Different chemical coupling agents were tested, namely, phenyl isocyanate (PI), alkenyl succinic anhydride (ASA) (Accosize 18 from American Cyanamid), and 3-isopropenyl-alpha,alpha'-dimethylbenzyl isocyanate (TMI). The extent of chemical modification was evaluated by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and surface energy analysis. After chemical modification, nanocomposite films were obtained using a toluene natural rubber solution in which the whiskers were dispersed. Their mechanical properties were found to be inferior to those of unmodified chitin/NR composites presented in our previous study. In fact, even though there is an increase in filler-matrix interaction as a result of chemical modification of the chitin whiskers, this does not contribute to the improvement in the mechanical properties of the resulting nanocomposite. It is concluded that this loss of performance is due to the partial destruction of the three-dimensional network of chitin whiskers assumed to be present in the unmodified composites.     

Spatial organization of cellulose microfibrils and matrix polysaccharides in primary plant cell walls as imaged by multichannel atomic force microscopy

We used atomic force microscopy (AFM), complemented with electron microscopy, to characterize the nanoscale and mesoscale structure of the outer (periclinal) cell wall of onion scale epidermis – a model system for relating wall structure to cell wall mechanics. The epidermal wall contains ~100 lamellae, each ~40 nm thick, containing 3.5‐nm wide cellulose microfibrils oriented in a common direction within a lamella but varying by ~30 to 90° between adjacent lamellae. The wall thus has a crossed polylamellate, not helicoidal, wall structure. Montages of high‐resolution AFM images of the newly deposited wall surface showed that single microfibrils merge into and out of short regions of microfibril bundles, thereby forming a reticulated network. Microfibril direction within a lamella did not change gradually or abruptly across the whole face of the cell, indicating continuity of the lamella across the outer wall. A layer of pectin at the wall surface obscured the underlying cellulose microfibrils when imaged by FESEM, but not by AFM. The AFM thus preferentially detects cellulose microfibrils by probing through the soft matrix in these hydrated walls. AFM‐based nanomechanical maps revealed significant heterogeneity in cell wall stiffness and adhesiveness at the nm scale. By color coding and merging these maps, the spatial distribution of soft and rigid matrix polymers could be visualized in the context of the stiffer microfibrils. Without chemical extraction and dehydration, our results provide multiscale structural details of the primary cell wall in its near‐native state, with implications for microfibrils motions in different lamellae during uniaxial and biaxial extensions.     

Cell wall extension results in the coordinate separation of parallel microfibrils: evidence from scanning electron microscopy and atomic force microscopy

Enlargement of the cell wall requires separation of cellulose microfibrils, mediated by proteins such as expansin; according to the multi-net growth hypothesis, enlargement passively reorients microfibrils. However, at the molecular scale, little is known about the specific movement of microfibrils. To find out, we examined directly changes in microfibril orientation when walls were extended slowly in vitro under constant load (creep). Frozen-thawed cucumber hypocotyl segments were strained by 20-30% by incubation in pH 4.5 buffer or by incubation of heat-inactivated segments in alpha-expansin or a fungal endoglucanase (Cel12A). Subsequently, the innermost layer of the cell wall was imaged, with neither extraction nor homogenization, by field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). AFM images revealed that sample preparation for FESEM did not appreciably alter cell wall ultrastructure. In both FESEM and AFM, images from extended and non-extended samples appeared indistinguishable. To quantify orientational order, we used a novel algorithm to characterize the fast Fourier transform of the image as a function of spatial frequency. For both FESEM and AFM images, the transforms of non-extended samples were indistinguishable from those of samples extended by alpha-expansin or Cel12A, as were AFM images of samples extended by acidic buffer. We conclude that cell walls in vitro can extend slowly by a creep mechanism without passive reorientation of innermost microfibrils, implying that wall loosening agents act selectively on the cross-linking polymers between parallel microfibrils, rather than more generally on the wall matrix.     

Combined immunofluorescence and field emission scanning electron microscope study of plasma membrane-associated organelles in highly vacuolated suspensor cells of white spruce somatic embryos

Highly vacuolated suspensor cells of spruce somatic embryos were examined by immunofluorescence light microscopy using butyl-methyl-methacrylate (BMM) and polyethylene glycol (PEG) embedded sections, transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The use of PEG embedded embryos provided a rapid method for light microscope detection of antigens before committing to FESEM analysis. BMM embedded specimens provided well preserved suspensor cells for immunofluorescence. FESEM permitted high resolution observation of large areas of the inner surface of the plasma membrane and associated cell organelles. Suspensor cells contained mostly transversely oriented cortical microtubules linked to the plasma membrane and adjacent microtubules by cross- bridges. Light and electron microscopy revealed numerous clathrin coated structures on the plasma membrane. These included flat patches of clathrin, coated pits and coated vesicles. Many coated vesicles were associated with microtubules. Both tubular and lamellar endoplasmic reticulum were observed on the plasma membrane by FESEM.     

Highly selective capture of phosphopeptides using a nano titanium dioxide-multiwalled carbon nanotube nanocomposite

In this study, a titanium dioxide-multiwalled carbon nanotube (TiO2-MWNT) nanocomposite was first used to enrich phosphopeptides as a binding agent. The TiO2-MWNT nanocomposite was synthesized by the hydrothermal reaction process and characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR), and X-ray powder diffraction (XRD). The results demonstrated that the anatase phase TiO2 nanoparticles had been successfully linked by MWNTs. The TiO2-MWNT nanocomposite was applied as a sorbent to enrich phosphopeptides, and the results showed that the performance of the TiO2-MWNT nanocomposite was better than 5 μm TiO2, as confirmed by the analysis of phosphopeptides from a tryptic digest of a standard protein (β-casein and bovine serum albumin) using high-performance liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS). The use of lactic acid in the loading buffer significantly enhances the selectivity of the TiO2-MWNT nanocomposite. This nanocomposite material was further applied to enrich the phosphopeptides in a protein digest obtained from nonfat milk successfully.     

Visualization of the nucleus and nuclear envelope in situ by SEM in tissue culture cells

Our previous work characterizing the biogenesis and structural integrity of the nuclear envelope and nuclear pore complexes (NPCs) has been based on amphibian material but has recently progressed into the analysis of tissue-culture cells. This protocol describes methods for the high resolution visualization, by field-emission scanning electron microscopy (FESEM), of the nucleus and associated structures in tissue culture cells. Imaging by fluorescence light microscopy shows general nuclear and NPC information at a resolution of approximately 200 nm, in contrast to the 3-5 nm resolution provided by FESEM or transmission electron microscopy (TEM), which generates detail at the macromolecular level. The protocols described here are applicable to all tissue culture cell lines tested to date (HeLa, A6, DLD, XTC and NIH 3T3). The processed cells can be stored long term under vacuum. The protocol can be completed in 5 d, including 3 d for cell growth, 1 d for processing and 1 d for imaging.     

Xyloglucan in the primary cell wall: assessment by FESEM,selective enzyme digestions and nanogold affinity tags

Xyloglucan has been hypothesized to bind extensively to cellulose microfibril surfaces and to tether microfibrils into a load‐bearing network, thereby playing a central role in wall mechanics and growth, but this view is challenged by newer results. Here we combined high‐resolution imaging by field emission scanning electron microscopy (FESEM) with nanogold affinity tags and selective endoglucanase treatments to assess the spatial location and conformation of xyloglucan in onion cell walls. FESEM imaging of xyloglucanase‐digested cell walls revealed an altered microfibril organization but did not yield clear evidence of xyloglucan conformations. Backscattered electron detection provided excellent detection of nanogold affinity tags in the context of wall fibrillar organization. Labelling with xyloglucan‐specific CBM76 conjugated with nanogold showed that xyloglucans were associated with fibril surfaces in both extended and coiled conformations, but tethered configurations were not observed. Labelling with nanogold‐conjugated CBM3, which binds the hydrophobic surface of crystalline cellulose, was infrequent until the wall was predigested with xyloglucanase, whereupon microfibril labelling was extensive. When tamarind xyloglucan was allowed to bind to xyloglucan‐depleted onion walls, CBM76 labelling gave positive evidence for xyloglucans in both extended and coiled conformations, yet xyloglucan chains were not directly visible by FESEM. These results indicate that an appreciable, but still small, surface of cellulose microfibrils in the onion wall is tightly bound with extended xyloglucan chains and that some of the xyloglucan has a coiled conformation.