The anti-biofouling effect of Lactobacillus fermentum-derived biosurfactant against Streptococcus mutans

Biofouling in the oral cavity often causes serious problems. The ability of Streptococcus mutans to synthesize extracellular glucans from sucrose using glucosyltransferases (gtfs) is vital for the initiation and progression of dental caries. Recently, it was demonstrated that some biological compounds, such as secondary metabolites of probiotic bacteria, have an anti-biofouling effect. In this study, S. mutans was investigated for the anti-biofouling effect of Lactobacillus fermentum (L.f.)-derived biosurfactant. It was hypothesized that two enzymes produced by S. mutans, glucosyltransferases B and C, would be inhibited by the L.f.-biosurfactant. When these two enzymes were inhibited, fewer biofilms (or none) were formed. RNA was extracted from a 48-h biofilm of S. mutans formed in the presence or absence of L.f. biosurfactant, and the gene expression level of gtfB/C was quantified using the real-time polymerase chain reaction (RT-PCR). L.f. biosurfactant showed substantial anti-biofouling activity because it reduced the process of attachment and biofilm production and also showed a reduction in gtfB/C gene expression (P value?相似文献   

The role of alginate in Pseudomonas aeruginosa EPS adherence, viscoelastic properties and cell attachment

Among various functions, extracellular polymeric substances (EPS) provide microbial biofilms with mechanical stability and affect initial cell attachment, the first stage in the biofilm formation process. The role of alginate, an abundant polysaccharide in Pseudomonas aeruginosa biofilms, in the viscoelastic properties and adhesion kinetics of EPS was analyzed using a quartz crystal microbalance with dissipation (QCM-D) monitoring technology. EPS was extracted from two P. aeruginosa biofilms, a wild type strain, PAO1, and a mucoid strain, PAOmucA22 that over-expresses alginate production. The higher alginate content in the EPS originating from the mucoid biofilms was clearly shown to increase both the rate and the extent of attachment of the EPS, as well as the layer's thickness. Also, the presence of calcium and elevated ionic strength increased the thickness of the EPS layer. Dynamic light scattering (DLS) showed that the presence of calcium and elevated ionic strength induced intermolecular attractive interactions in the mucoid EPS molecules. For the wild type EPS, in the presence of calcium, an elevated shift in the distribution of the diffusion coefficients was observed with DLS due to a more compacted conformation of the EPS molecules. Moreover, the alginate over-expression effect on EPS adherence was compared to the effect of alginate over-expression on P. aeruginosa cell attachment. In a parallel plate flow cell, under similar hydraulic and aquatic conditions as those applied for the EPS adsorption tests in the QCM-D flow cell, reduced adherence of the mucoid strain was clearly observed compared to the wild type isogenic bacteria. The results suggest that alginate contributes to steric hindrance and shielding of cell surface features and adhesins that are known to promote cell attachment.     

Evaluating biofilm growth of two oral pathogens

AIMS: To determine the expediency of a microtitre assay system for establishing, quantifying and antimicrobial testing of two representative oral pathogens. METHODS AND RESULTS: Streptococcus mutans and Porphyromonas gingivalis were used. Morphological characteristics of the attached population were evaluated. Biofilm growth was evaluated spectrophotometrically (undisturbed and 1 N NaOH dissipated biofilm). The minimum concentration of chlorhexidine gluconate that inhibited biofilm growth was determined. Growth of the biofilms was successfully monitored by direct optical density measurements or those re-suspended in 1 N NaOH. The latter was necessary when glucans were present in Strep. mutans biofilms. The minimum concentration of chlorhexidine gluconate that inhibited biofilm growth was 1.25 microg ml(-1) for both species. The attached bacteria exhibited common biofilm characteristics. SIGNIFICANCE AND IMPACT OF THE STUDY: The assay system developed was especially useful for monitoring the growth of adherent Strep. mutans in the presence of glucans, which is particularly significant for the study of anti-plaque chemicals.     

Impact of cleaning and disinfection agents on biofilm structure and on microbial transfer to a solid model food

AIM: To determine how single cells and microcolonies transfer to food from open surfaces in the meat industry. METHODS AND RESULTS: Biofilms of four bacterial strains isolated from food processing surfaces were established on stainless steel substrates conditioned with meat exudate in the presence or absence of CaCl(2). Image analysis of the biofilms showed that the addition of calcium resulted in an increase of the number and size of microcolonies with two strains: Staphylococcus sciuri and Pseudomonas fluorescens. Image analysis of the biofilms of those two strains grown in the presence of calcium was performed before and after contacts with tryptone soya agar as a solid model food. For the biofilms treated or not with a chlorinated alkaline agent, where a decrease in surface coverage occurred, it was accompanied by a decrease in the percentage of the coverage accounted for by microcolonies (P(m)). Attachment strength was greater for P. fluorescens than for S. sciuri. When the P. fluorescens biofilms were treated with a solution containing glutaraldehyde, the contacts did not modify their structure. By contrast, their treatment with chlorinated alkaline resulted, after contacts, in the smallest coverage and P(m). With S. sciuri, a decrease in coverage after contacts always occurred and was the greatest for the untreated biofilms. CONCLUSIONS: After contacts between biofilms and a solid model food, microcolonies were preferentially detached compared with single cells. A chlorinated alkaline product either decreased biofilm attachment strength (P. fluorescens) or unexpectedly increased it (S. sciuri), whereas a glutaraldehyde-based disinfectant increased both attachment strength and microcolony cohesion. SIGNIFICANCE AND IMPACT OF THE STUDY: The contaminating potential of a surface depends not only on the level of contamination but also on the nature, structure and history of the contamination.     

Vesicle fusion studied by surface plasmon resonance and surface plasmon fluorescence spectroscopy

Substrate-supported planar lipid bilayers are generated most commonly by the adsorption and transformation of phospholipid vesicles (vesicle fusion). We have recently demonstrated that simultaneous measurements of surface plasmon resonance (SPR) and surface plasmon fluorescence spectroscopy (SPFS) are highly informative for monitoring lipid membranes on solid substrates. SPR and SPFS provide information on the amount and topography of adsorbed lipid membranes, respectively. In this study, the vesicle fusion process was studied in detail by measuring SPR-SPFS at a higher rate and plotting the obtained fluorescence intensity versus film thickness. We could track the initial adsorption of vesicles, the onset of vesicle rupture occurring at certain vesicle coverage of the surface, and the autocatalytic transformation into planar bilayers. We also monitored vesicle fusion of the same vesicle suspensions by quartz crystal microbalance with dissipation monitoring (QCM-D). We compared the results obtained from SPR-SPFS and QCM-D to highlight the unique information provided by SPR-SPFS.     

Anti-biofouling property of vanillin on Aeromonas hydrophila initial biofilm on various membrane surfaces

Biofouling is a serious problem on filter membranes of water purification systems due to formation of bacterial biofilms, which can be detrimental to the membrane performance. Biofouling occurs on membrane surface and therefore greatly influences the physical and chemical aspects of the surface. Several membranes including microfiltration, ultrafiltration, and reverse osmosis (RO) membranes were used to learn about the anti-biofouling properties of vanillin affecting the membrane performances. Vanillin has been recognized as a potential quorum quenching compound for Aeromonas hydrophila biofilms. The initial attachment and dynamics of biofilm growth were monitored using scanning electron microscopy and confocal laser scanning microscopy. Biofilm quantities were measured using a plate count method and total protein determinations. Vanillin addition was effective in the prevention of biofilm formation on the tested membrane surfaces. Among the membranes, RO membranes made with cellulose acetate showed the most substantial reduction of biofilm formation by addition of vanillin. The biofilm reduction was confirmed by the results of surface coverage, biomass and protein accumulation. The HPLC spectrum of the spent culture with vanillin addition showed that vanillin may interfere with quorum sensing molecules and thus prevent the formation of the biofilms.     

The quartz crystal microbalance as a continuous monitoring tool for the study of endothelial cell surface attachment and growth

The quartz crystal microbalance (QCM) was used to monitor endothelial cell (EC) adhesion on the gold surface of an oscillating quartz crystal contained in a QCM device. A number of parameters were investigated. First, we observed differential QCM O-ring toxicities for ECs. Second, appropriate conditions for cell culture and QCM cell environment were identified that can eliminate large-scale frequency oscillations in the measurements. These artifacts are not due to added cells but originate in the time-dependent evaporation of water. Having eliminated these artifacts, we then demonstrated that the measured steady-state crystal frequency shift, Delta f, and motional resistance shift, DeltaR, were determined by the number of firmly attached ECs requiring trypsinization from the crystal surface. Last, following steady-state attachment of ECs, the EC growth stimulation by fibroblast growth factor was monitored in a continuous fashion by measuring f and R values over a 72 h. period. We observed the Delta f values to increase in a way that reflected the increase in EC number bound to the QCM surface. Following addition of ECs to the QCM, the time-dependent increase in DeltaR can be interpreted in terms of increase by the ECs of the energy dissipation properties of the solution at the solution-gold surface interface. This effect is due to their rapid surface attachment and the elaboration of their cytoskeletal properties. These results indicate that the QCM technique can be used for the study of EC attachment and growth and suggest its potential for the real time study of per unit surface area cell mass distribution dynamics and viscoelastic properties and the cells' responses to stresses or perturbations brought about using biologically active molecules.     

Characterization of Phenotypic Changes in Pseudomonas putida in Response to Surface-Associated Growth

The formation of complex bacterial communities known as biofilms begins with the interaction of planktonic cells with a surface. A switch between planktonic and sessile growth is believed to result in a phenotypic change in bacteria. In this study, a global analysis of physiological changes of the plant saprophyte Pseudomonas putida following 6 h of attachment to a silicone surface was carried out by analysis of protein profiles and by mRNA expression patterns. Two-dimensional (2-D) gel electrophoresis revealed 15 proteins that were up-regulated following bacterial adhesion and 30 proteins that were down-regulated. N-terminal sequence analyses of 11 of the down-regulated proteins identified a protein with homology to the ABC transporter, PotF; an outer membrane lipoprotein, NlpD; and five proteins that were homologous to proteins involved in amino acid metabolism. cDNA subtractive hybridization revealed 40 genes that were differentially expressed following initial attachment of P. putida. Twenty-eight of these genes had known homologs. As with the 2-D gel analysis, NlpD and genes involved in amino acid metabolism were identified by subtractive hybridization and found to be down-regulated following surface-associated growth. The gene for PotB was up-regulated, suggesting differential expression of ABC transporters following attachment to this surface. Other genes that showed differential regulation were structural components of flagella and type IV pili, as well as genes involved in polysaccharide biosynthesis. Immunoblot analysis of PilA and FliC confirmed the presence of flagella in planktonic cultures but not in 12- or 24-h biofilms. In contrast, PilA was observed in 12-h biofilms but not in planktonic culture. Recent evidence suggests that quorum sensing by bacterial homoserine lactones (HSLs) may play a regulatory role in biofilm development. To determine if similar protein profiles occurred during quorum sensing and during early biofilm formation, HSLs extracted from P. putida and pure C(12)-HSL were added to 6-h planktonic cultures of P. putida, and cell extracts were analyzed by 2-D gel profiles. Differential expression of 16 proteins was observed following addition of HSLs. One protein, PotF, was found to be down-regulated by both surface-associated growth and by HSL addition. The other 15 proteins did not correspond to proteins differentially expressed by surface-associated growth. The results presented here demonstrate that P. putida undergoes a global change in gene expression following initial attachment to a surface. Quorum sensing may play a role in the initial attachment process, but other sensory processes must also be involved in these phenotypic changes.     

Effect of carbohydrates on fructosyltransferase expression and distribution in Streptococcus mutans GS-5 biofilms

Streptococcus mutans produces a fructosyltransferase (FTF) enzyme, which synthesizes fructan polymers from sucrose. Fructans contribute to the virulence of the biofilm by acting as binding sites for S. mutans adhesion and as extracellular nutrition reservoir for the oral bacteria. Antibodies raised against a recombinant S. mutans FTF were used to test the effect of glucose, fructose, and sucrose on FTF expression in S. mutans GS-5 biofilms. Biofilms formed in the presence of fructose and glucose showed a higher ratio of FTF compared to biofilms formed in the presence of sucrose. Confocal laser scanning microscopy images of S. mutans biofilms indicated a carbohydrate-dependent FTF distribution. The layer adjacent to the surface and those at the liquid interface displayed high amounts cell-free FTF with limited amount of bacteria while the in-between layers demonstrated both cell-free FTF and cells expressing cell-surface FTF. Biofilm of S. mutans grown on hydroxyapatite surfaces expressed several FTF bands with molecular masses of 160, 125, 120, 100, and 50 kDa, as detected by using FTF specific antibodies. The results show that FTF expression and distribution in S. mutans GS-5 biofilms is carbohydrate regulated.     

Monitoring of microbial adhesion and biofilm growth using electrochemical impedancemetry

Electrochemical impedance spectroscopy was tested to monitor the cell attachment and the biofilm proliferation in order to identify characteristic events induced on the metal surface by Gram-negative (Pseudomonas aeruginosa PAO1) and Gram-positive (Bacillus subtilis) bacteria strains. Electrochemical impedance spectra of AISI 304 electrodes during cell attachment and initial biofilm growth for both strains were obtained. It can be observed that the resistance increases gradually with the culture time and decreases with the biofilm detachment. So, the applicability of electric cell-substrate impedance sensing (ECIS) for studying the attachment and spreading of cells on a metal surface has been demonstrated. The biofilm formation was also characterized by the use of scanning electron microscopy and confocal laser scanning microscopy and COMSTAT image analysis. The electrochemical results roughly agree with the microscope image observations. The ECIS technique used in this study was used for continuous real-time monitoring of the initial bacterial adhesion and the biofilm growth. It provides a simple and non-expensive electrochemical method for in vitro assessment of the presence of biofilms on metal surfaces.     

Dynamic measurement of the surface stress induced by the attachment and growth of cells on Au electrode with a quartz crystal microbalance

The processes of adhesion, spreading and proliferation of human mammary cancer cells MCF-7 on two Au electrodes with different surface roughness (R(f) and R(f)=3.2 or 1.1) were monitored and clearly identified with the quartz crystal microbalance (QCM) technique. Analyses of the QCM responses on the resonant frequency shifts (Deltaf(0)) vs. the motional resistance changes (DeltaR(1)) revealed a significant surface-stress effect in the involved courses, in addition to a viscodensity effect and a relatively small mass effect (especially at the smooth electrode). Experiments of fluorescence microscopy, cyclic voltammetry and electrochemical impedance spectroscopy were conducted to investigate the cell population on the electrode vs. the electrode-surface roughness. Simplified equations are deduced to quantitatively evaluate the surface stress, and a novel QCM method for dynamically measuring the surface stress on an electrode in cell-culture course is thus described. It was found that the smoother surface (R(f)=1.1) gave a higher surface stress during cell attachment and less cell population on it than the rougher surface (R(f)=3.2). In addition, real-time QCM monitoring showed on the same electrode the surface stress induced by hepatic normal cells being notably higher than that caused by hepatic cancer cells at cell-attachment stage, suggesting that the surface-stress measurement can exhibit the difference of adhesion-performance between the healthy and ill-behaved cells.     

Quartz Crystal Microbalance with Dissipation Monitoring: Enabling Real-Time Characterization of Biological Materials and Their Interactions

In recent years, there has been a rapid growth in the number of scientific reports in which the quartz crystal microbalance (QCM) technique has played a key role in elucidating various aspects of biological materials and their interactions. This article illustrates some key advances in the development of a special variation of this technique called quartz crystal microbalance with dissipation monitoring (QCM-D). The main feature and advantage of QCM-D, compared with the conventional QCM, is that it in addition to measuring changes in resonant frequency (Δf), a simultaneous parameter related to the energy loss or dissipation (ΔD) of the system is also measured. Δf essentially measures changes in the mass attached to the sensor surface, while ΔD measures properties related to the viscoelastic properties of the adlayer. Thus, QCM-D measures two totally independent properties of the adlayer. The focus of this review is an overview of the QCM-D technology and highlights of recent applications. Specifically, recent applications dealing with DNA, proteins, lipids, and cells will be detailed. This is not intended as a comprehensive review of all possible applications of the QCM-D technology, but rather a glimpse into a few highlighted application areas in the biomolecular field that were published in 2007.     

Long-term monitoring of biofilm growth and disinfection using a quartz crystal microbalance and reflectance measurements

A biofilm reactor was constructed to monitor the long-term growth and removal of biofilms as monitored by the use of a quartz crystal microbalance (QCM) and a novel optical method. The optical method measures the reflectance of white light off the surface of the quartz crystal microbalance electrode (gold) for determination of the biofilm thickness. Biofilm growth of Pseudomonas aeruginosa (PA) on the surface was used as a model system. Bioreactors were monitored for over 6 days. Expressing the QCM data as the ratio of changes in resistance to changes in frequency (DeltaR/Deltaf) facilitated the comparison of individual biofilm reactor runs. The various stages of biofilm growth and adaptation to low nutrients showed consistent characteristic changes in the DeltaR/Deltaf ratio, a parameter that reflects changes in the viscoelastic properties of the biofilm. The utility of white light reflectance for thickness measurements was shown for those stages of biofilm growth when the solution was not turbid due to high numbers of unattached cells. The thickness of the biofilms after 6 days ranged from 48 mum to 68 mum. Removal of the biofilm by a disinfectant (chlorine) was also measured in real time. The combination of QCM and reflectance allowed us to monitor in real time changes in the viscoelastic properties and thickness of biofilms over long periods of time.     

Optical waveguide lightmode spectroscopy (OWLS) to monitor cell proliferation quantitatively

The use of microscopic observations used for in situ monitoring of cell proliferation in the production of epidermal autografts is not satisfactory. In particular, the identification of the projected cell area from microscopic pictures by image analysis (IA) depends on intensity edges and level of contrasts and is thus limited to subconfluent cultures. Some of these problems can be solved by using optical waveguide lightmode spectroscopy (OWLS), which measures the effective refractive index of a thin layer above an Si(Ti)O(2) waveguide surface. In this study the use of OWLS to monitor cell adhesion, spreading, and growth was studied. The sensitivity of the method was investigated by using three different cell lines, two fibroblasts and one hepatoma cell line. Cell proliferation of two strains of fibroblasts and hepatoma cells was monitored up to 2 days with the OWLS. In parallel, cell density was determined at different time points microscopically using an additional window in the measuring chamber. The cell density of fully spread cells ( approximately 4 h after attachment) was found to be proportional to the OWLS signal. In long-term cultures the influence of the cell density from single cells to confluent cell cultures upon the OWLS signal was investigated. The exponentially growing number of hepatoma resulted in a linear increase of the sensor signal. Due to this and to the fact that the proliferating cells exhibit contact inhibition, it was concluded that the cell contact area must decrease exponentially. The results show the strength of OWLS for monitoring the adhesion and proliferation of anchorage-dependent cells in applications where an on-line indicator of the total biomass is needed. Additionally, OWLS provides metabolic information through detection of the cell mass in close contact with the waveguide.     

Cell Density Modulates Acid Adaptation in Streptococcus mutans: Implications for Survival in Biofilms

Streptococcus mutans normally colonizes dental biofilms and is regularly exposed to continual cycles of acidic pH during ingestion of fermentable dietary carbohydrates. The ability of S. mutans to survive at low pH is an important virulence factor in the pathogenesis of dental caries. Despite a few studies of the acid adaptation mechanism of this organism, little work has focused on the acid tolerance of S. mutans growing in high-cell-density biofilms. It is unknown whether biofilm growth mode or high cell density affects acid adaptation by S. mutans. This study was initiated to examine the acid tolerance response (ATR) of S. mutans biofilm cells and to determine the effect of cell density on the induction of acid adaptation. S. mutans BM71 cells were first grown in broth cultures to examine acid adaptation associated with growth phase, cell density, carbon starvation, and induction by culture filtrates. The cells were also grown in a chemostat-based biofilm fermentor for biofilm formation. Adaptation of biofilm cells to low pH was established in the chemostat by the acid generated from excess glucose metabolism, followed by a pH 3.5 acid shock for 3 h. Both biofilm and planktonic cells were removed to assay percentages of survival. The results showed that S. mutans BM71 exhibited a log-phase ATR induced by low pH and a stationary-phase acid resistance induced by carbon starvation. Cell density was found to modulate acid adaptation in S. mutans log-phase cells, since pre-adapted cells at a higher cell density or from a dense biofilm displayed significantly higher resistance to the killing pH than the cells at a lower cell density. The log-phase ATR could also be induced by a neutralized culture filtrate collected from a low-pH culture, suggesting that the culture filtrate contained an extracellular induction component(s) involved in acid adaptation in S. mutans. Heat or proteinase treatment abolished the induction by the culture filtrate. The results also showed that mutants defective in the comC, -D, or -E genes, which encode a quorum sensing system essential for cell density-dependent induction of genetic competence, had a diminished log-phase ATR. Addition of synthetic competence stimulating peptide (CSP) to the comC mutant restored the ATR. This study demonstrated that cell density and biofilm growth mode modulated acid adaptation in S. mutans, suggesting that optimal development of acid adaptation in this organism involves both low pH induction and cell-cell communication.     

Protein expression by Streptococcus mutans during initial stage of biofilm formation

Cells growing on surfaces in biofilms exhibit properties distinct from those of planktonic cells, such as increased resistance to biocides and antimicrobial agents. In spite of increased interest in biofilms, very little is known about alterations in cell physiology that occur upon attachment of cells to a surface. In this study we have investigated the changes induced in the protein synthesis by contact of Streptococcus mutans with a surface. Log-phase planktonic cells of S. mutans were allowed to adhere to a glass slide for 2 h in the presence of a (14)C-amino acid mixture. Nonadhered cells were washed away, and the adhered cells were removed by sonication. The proteins were extracted from the nonadhered planktonic and the adhered biofilm cells and separated by two-dimensional gel electrophoresis followed by autoradiography and image analysis. Image analysis revealed that the relative rate of synthesis of 25 proteins was enhanced and that of 8 proteins was diminished > or =1.3-fold in the biofilm cells. Proteins of interest were identified by mass spectrometry and computer-assisted protein sequence analysis. Of the 33 proteins associated with the adhesion response, all but 10 were identified by mass spectrometry and peptide mass fingerprinting. The most prominent change in adhered cells was the increase in relative synthesis of enzymes involved in carbohydrate catabolism indicating that a redirection in protein synthesis towards energy generation is an early response to contact with and adhesion to a surface.     

Real-time monitoring of extracellular matrix-mediated PC12 cell attachment and proliferation using an electronic biosensing device

The attachment and proliferation of a well-established, neuron-like cell line, rat pheochromocytoma (PC12) cells, on different extracellular matrices (ECMs) was monitored using cellular impedance sensing (CIS). Commonly used ECMs, including fibronectin, laminin, poly-l-lysine, collagen and poly-l-lysine followed by laminin, in addition to DMEM cell culture media alone as a control, were studied: CIS identified the dynamic progress of the adhesion and proliferation of the cells on different ECMs. Among these modified ECM surfaces, the laminin- and poly-l-lysine/laminin-modified surfaces were the best suited for the neuron-to-electrode surface attachment and proliferation, which was confirmed by MTT assays and a scanning electron microscopy analysis. This work provides a simple method to study neuron cell/ECM interactions in a real-time, label-free, and quantitative manner.     

Species and material considerations in the formation and development of microalgal biofilms

The development of microalgal biofilms has received very limited study despite its relevance in the design of photobioreactors where film growth may be advantageous for biomass separation or disadvantageous in fouling surfaces. Here, the effects of species selection, species control, and substrate properties on biofilms of Scenedesmus obliquus and Chlorella vulgaris were investigated. Experiments were conducted in batch culture and in continuous culture modes in a flow cell. Cell growth was monitored using confocal laser scanning microscopy and gravimetrically. Species selection and species control had significant effects on biofilm development. On non-sterile wastewater, C. vulgaris shifted from primarily planktonic (23.7% attachment) to primarily sessile (79.8% attachment) growth. The biofilms that developed in non-sterile conditions were thicker (52 ± 19 μm) than those grown in sterile conditions (7 ± 6 μm). By contrast, S. obliquus attained similar thicknesses (54 ± 31 and 53 ± 38 μm) in both sterile and non-sterile conditions. Neither species was able to dominate a non-sterile biofilm. The effect of substrate surface properties was minimal. Both species grew films of similar thickness (∼30 μm for S. obliquus, <10 μm for C. vulgaris) on materials ranging from hydrophilic (glass) to hydrophobic (polytetrafluoroethylene). Surface roughness created by micropatterning the surface with 10 μm grooves did not translate into long-term increases in biofilm thickness. The results indicate that species selection and control are more important than surface properties in the development of microalgal biofilms.     

Binary and mixed population biofilms: Time-lapse image analysis and disinfection with biocides

Simultaneous binary population biofilm formation by a bacterium and filamentous fungus was demonstrated by time-lapse image analysis in a flow cell system. The accumulation of attached bacterial cells followed an S-shaped graph similar to batch culture bacterial growth, with continual attachment, detachment, rotation, and movement of bacteria over the surface. An extensive hyphal network formed on the surface of the flow cell, protruding into the bulk flow, which subsequently detached. Multiple species mixed fungal–bacterial model biofilms were tested for isothiazolone biocide susceptibility. Biofilms were less susceptible to biocide treatment than planktonic cells of the same organisms. Mixed species biofilms, particularly for the bacterial species, offered greater protection against the action of the biocide compared to single species biofilms. Microbial loss as a result of biocide activity was shown by reduced cell surface coverage in electron micrographs. Received 11 March 2002/ Accepted in revised form 08 August 2002     

Triclosan inhibition of membrane enzymes and glycolysis of Streptococcus mutans in suspensions and biofilms

Triclosan was found to be a potent inhibitor of the F(H+)-ATPase of the oral pathogen Streptococcus mutans and to increase proton permeabilities of intact cells. Moreover, it acted additively with weak-acid transmembrane proton carriers, such as fluoride or sorbate, to sensitize glycolysis to acid inhibition. Even at neutral pH, triclosan could inhibit glycolysis more directly as an irreversible inhibitor of the glycolytic enzymes pyruvate kinase, lactic dehydro genase, aldolase, and the phosphoenolpyruvate:sugar phosphotransferase system (PTS). Cell glycolysis in suspensions or biofilms was inhibited in a pH-dependent manner by triclosan at a concentration of about 0.1 mmol/L at pH 7, approximately the lethal concentration for S. mutans cells in suspensions. Cells in intact biofilms were almost as sensitive to triclosan inhibition of glycolysis as were cells in suspensions but were more resistant to killing. Targets for irreversible inhibition of glycolysis included the PTS and cytoplasmic enzymes, specifically pyruvate kinase, lactic dehydrogenase, and to a lesser extent, aldolase. General conclusions are that triclosan is a multi-target inhibitor for mutans streptococci, which lack a triclosan-sensitive FabI enoyl-ACP reductase, and that inhibition of glycolysis in dental plaque biofilms, in which triclosan is retained after initial or repeated exposure, would reduce cariogenicity.