Characterization of site-specific ScFv PEGylation for tumor-targeting pharmaceuticals

New radiopharmaceuticals are possible using site-specific conjugation of small tumor binding proteins and poly(ethylene glycol) (PEG) scaffolds to provide modular multivalent, homo- or heterofunctional cancer-targeting molecules having preferred molecular size, valence, and functionality. Residence time in plasma can be optimized by modification of the size, number, and charge of the protein units. However, random PEG conjugation (PEGylation) of these small molecules via amine groups has led to variations of structural conformation and binding affinity. To optimize PEGylation, scFvs have been recombinantly produced in a vector that adds an unpaired cysteine (c) near the scFv carboxy terminus (scFv-c), thus providing a specific site for thiol conjugation. To evaluate the general applicability of this unpaired cysteine for PEGylation of scFv-c, conjugation efficiency was determined for four different scFvs and several PEG molecules having thiol reactive groups. The effect of the PEG molecular format on scFv-c PEG malignant cell binding was also addressed. ScFvs produced as scFv-c and purified by anti E-TAG affinity chromatography were conjugated using PEG molecules with maleimide (Mal) or o-pyridyl disulfide (OPSS). Conjugations were performed at pH 7.0, with 2 molar excess TCEP/scFv and PEG-(Mal) or PEG-OPSS, using 5:1 (PEG/scFv). PEG-Mal conjugation efficiency was also evaluated with 1:5 (PEG/scFv). PEGylation efficiency was determined for each reaction by quantitation of the products on SDS-PAGE. ScFv-c conjugation with unifunctional maleimide PEGs resulted in PEG conjugates incorporating 30-80% of the scFv-c, but usually above 50%. Efficiency of scFv-c conjugation to both functional groups of the bifunctional PEG-(Mal)2 varied between the PEG and scFv-c molecules studied. A maximum of 45% of scFv-c protein was conjugated as PEG- (scFv-c)2 using the smallest PEG-(Mal)2 (2 kDa). No significant increase in scFv-c conjugation was observed by the use of greater than a 5 molar excess of PEG/scFv-c. Under the same conjugation conditions, PEG as OPSS yielded less than 10% PEG-scFv-c. PEG-(scFv)2 conjugates had increased binding in ELISA using malignant cell membranes, when compared with unmodified scFv-c. PEGylated-scFv binding was comparable with unmodified scFv-c. In summary, scFv-c can be PEGylated in a site-specific manner using uni- or bivalent PEG-Mal, either linear or branched. ScFv-c was most efficiently conjugated to smaller PEG-Mal molecules, with the smallest, 2 kDa PEG-Mal, usually PEGylating 60-90% of the scFv-c. ScFv-c conjugation to form PEG-(scFv-c)2 reached greatest efficiency at 45%, and its purified form demonstrated greater binding than the corresponding scFv-c.     

Reduced immunogenicity of beta-lactoglobulin by conjugating with chitosan

Bovine beta-lactoglobulin (beta-LG) was conjugated with chitosan (CHS) by means of a water-soluble carbodiimide to reduce the immunogenicity of beta-LG. Each beta-LG-CHS conjugate was purified by ion-exchange chromatography and hydrophobic chromatography. The conjugation between beta-LG and CHS was confirmed by SDS-PAGE, the isoelectric point of the conjugate being higher than that of beta-LG. Two types of the beta-LG-CHS conjugate were obtained with molar ratios of beta-LG to CHS of 1:1 (F1) and 1:2 (F2). Structural analyses by fluorescence measurement, ELISA with monoclonal antibodies and retinol-binding activity indicated that the conjugates had almost maintained the native structure of beta-LG. The antigenicity of the beta-LG-CHS conjugates was similar to that of beta-LG in C3H/He mice. Reduction of the immunogenicity of beta-LG was achieved by conjugation with CHS. In particular, F2 showed very low immunogenicity. B cell epitopes of beta-LG and the conjugates recognized in C3H/He mice were determined with 15-mer multi-pin peptide; the linear epitope profiles of the conjugates were found to be similar to those of beta-LG, while the antibody response to each epitope was dramatically reduced. Conjugation of beta-LG with chitosan was effective for reducing the immunogenicity of beta-LG.     

Synthesis, characterization, and in vitro activity of dendrimer-streptokinase conjugates

Dendrimer conjugation with low molecular weight drugs has been of increasing interest recently for improving pharmacokinetics, targeting drugs to specific sites, and facilitating cellular uptake. Opportunities for increasing the performance of relatively large therapeutic proteins such as streptokinase (SK) using dendrimers are being explored in this study. Using the active ester method, a series of streptokinase-poly(amido amine) (PAMAM) G3.5 conjugates were synthesized with varying amounts of dendrimer-to-protein molar ratios. Characterization of these conjugates by GPC, IEC, and native-PAGE suggested that the conjugation reaction was successful, resulting in relatively pure SK-dendrimer conjugates. The conjugate made with an equimolar ratio of dendrimer to streptokinase (1:1) exhibited the highest enzymatic activity retention ( approximately 80% retained) that has been reported so far for conjugated streptokinase with macromolecules such as PEG or dextran. SK conjugates with higher streptokinase-to-dendrimer molar ratios (1:10 and 1:20) exhibited lower initial enzymatic activities. However, these conjugates showed sustained thrombolytic activity in plasma, perhaps due to the release of SK from the conjugate. All of the SK conjugates displayed significantly improved stability in phosphate buffer solution, compared to free SK. The high coupling reaction efficiencies and the resulting high enzymatic activity retention achieved in this study could enable a desirable way for modifying many bioactive macromolecules with dendrimers.     

Evaluation of ketone-oxime method for developing therapeutic on-demand cleavable immunoconjugates

The use of antibody molecules in immunoassay, molecular targeting, or detection techniques encompasses a broad variety of applications affecting nearly every field of medical science. In cancer therapy, monoclonal antibodies (mAb) have been used as vehicles to deliver radionuclides, toxins, or drugs to the target cancer cells. New conjugation methods are most needed to conjugate a wide variety of targeting small molecules and peptidomimatic compounds. Here, we exploited a keto-oxime method for conjugation of protease susceptible linkers to an antibody. This modified method involves two steps: (i) introduction of methyl ketone linkers (referred to as linker moiety) to the primary amines present in the antibody and (ii) conjugation of ketone linkers to aminoxy functional group present in the conjugated moiety (referred to as functional moiety). We have optimized this conjugation method and shown that approximately 10 functional moieties can be conjugated to antibody. Conjugation was verified by MALDI-TOF MS and Western blot analysis. The acidic pH conditions used in this method did not change the immune reactivity of the Ab. In addition, in vitro protease susceptibility assay was performed to validate this method for prodrug release assay as well as to remove excess radioimmune conjugates from circulation. This orthogonal method is compatible with peptides containing a thiol, amino, or carboxyl groups in the conjugation moiety.     

Design and construction of novel molecular conjugates for signal amplification (I): conjugation of multiple horseradish peroxidase molecules to immunoglobulin via primary amines on lysine peptide chains

Immunoconjugates are widely used for indirect detection of analytes (such as antibodies or antigens) in a variety of immunoassays. However, the availability of functional groups such as primary amines or free sulfhydryls in an immunoglobulin molecule is the limiting factor for optimal conjugation and, therefore, determines the sensitivity of an assay. In the present study, an N-terminal bromoacetylated 20 amino acid peptide containing 20 lysine residues was conjugated to N-succinimidyl-S-acetylthioacetate (SATA)-modified IgG or free sulfhydryl groups on 2-mercaptoethylamine (2-MEA)-reduced IgG molecules via a thioether (S---CH₂CONH) linkage to introduce multiple reactive primary amines per IgG. These primary amines were then covalently coupled with maleimide-activated horseradish peroxidase (HRP). The poly-HRP–antibody conjugates thus generated demonstrated greater than 15-fold signal amplification upon reaction with orthophenyldiamine substrate. The poly-HRP–antibody conjugates efficiently detected human immunodeficiency virus (HIV)-1 antibodies in plasma specimens with significantly higher sensitivity than conventionally prepared HRP–antibody conjugates in an HIV-1 solid-phase enzyme immunoassay and Western blot analysis. The signal amplification techniques reported here could have the potential for development of highly sensitive immunodiagnostic assay systems.     

An improved method for the microscale preparation and characterization of hapten-protein conjugates: the use of cholesterol as a model for nonchromophore hydroxylated haptens

A minute amount (0.446 micromol) of cholesterol (Chol) was converted into an hemisuccinate derivative (Chol HS) using an excess of succinic anhydride. The optimal conditions for synthesis of Chol HS were explored by checkerboard experiments in which various succinic anhydride/Chol molar ratios ranging from 5:1 to 30:1 were assayed over a wide temperature range (50-85 degrees C) and for various incubation times (3-8 h). Total conversion was obtained at the higher reagent ratios, temperatures, and incubation times. Subsequently, this carboxylic derivative was first covalently linked to bovine serum albumin (BSA) then to various proteins (casein, ovalbumin, and hemocyanins) or to a synthetic homopolymer (poly-DL-Lysine) via a modified version of the mixed anhydride method of Erlanger, performed in a reversed micellar medium. The assessment of the number of haptenic groups per mole of BSA (epitope density) was achieved chromatographically by two methods according to a Chol standard curve established at 207 nm with linearity in the range 0-50 microg. These procedures involving an alkaline hydrolysis of a sample of either the conjugate (direct method) or the unreacted Chol HS (indirect method) yielded an acceptable level of agreement and concordant results in all cases. The influence of the activated hapten/BSA molar ratio on the coupling efficiency was investigated by the direct method within the range 10:1 to 250:1. Using the optimal conditions determined for Chol HS synthesis (a molar reagent ratio of 30:1 with incubation at 65 degrees C for 6 h) and for BSA haptenation (a 100-fold molar excess of activated hapten, with a carrier stock concentration of 5 mg/mL), epitope density of the conjugates lied between 23 and 27. By reacting the same amount of activated hapten ( approximately 216 microg) with identical amounts of various carriers (300 microg), conjugation efficiency was found similar on a microgram of Chol bound per milligram of carrier basis. This simple and reproducible conjugation and analysis procedures should provide a general method applicable to poorly available and weakly immunogenic haptens bearing hydroxyl groups such as polyether-type marine toxins.     

Intracellular photodynamic therapy with photosensitizer-nanoparticle conjugates: cancer therapy using a 'Trojan horse'.

Phthalocyanine-nanoparticle conjugates have been designed and synthesised for the delivery of hydrophobic photosensitizers for photodynamic therapy (PDT) of cancer. The phthalocyanine photosensitizer stabilized gold nanoparticles have an average diameter of 2-4 nm. The synthetic strategy interdigitates a phase transfer reagent between phthalocyanine molecules on the particle surface that solubilises the hydrophobic photosensitizer in polar solvents enabling delivery of the nanoparticle conjugates to cells. The phthalocyanine is present in the monomeric form on the nanoparticle surface, absorbs radiation maximally at 695 nm and catalytically produces the cytotoxic species singlet oxygen with high efficiency. These properties suggest that the phthalocyanine-nanoparticle conjugates are ideally suited for PDT. In a process that can be considered as cancer therapy using a 'Trojan horse', when the nanoparticle conjugates are incubated with HeLa cells (a cervical cancer cell line), they are taken up thus delivering the phthalocyanine photosensitizer directly into the cell interior. Irradiation of the nanoparticle conjugates within the HeLa cells induced substantial cell mortality through the photodynamic production of singlet oxygen. The PDT efficiency of the nanoparticle conjugates, determined using colorimetric assay, was twice that obtained using the free phthalocyanine derivative. Following PDT with the nanoparticle conjugates, morphological changes to the HeLa cellular structure were indicative of cell mortality via apoptosis. Further evidence of apoptosis was provided through the bioluminescent assay detection of caspase 3/7. Our results suggest that gold nanoparticle conjugates are an excellent vehicle for the delivery of surface bound hydrophobic photosensitizers for efficacious photodynamic therapy of cultured tumour cells.     

Molecular characterization of multivalent bioconjugates by size-exclusion chromatography with multiangle laser light scattering

The degree of substitution and valency of bioconjugate reaction products are often poorly judged or require multiple time- and product-consuming chemical characterization methods. These aspects become critical when analyzing and optimizing the potency of costly polyvalent bioactive conjugates. In this study, size-exclusion chromatography with multiangle laser light scattering was paired with refractive index detection and ultraviolet spectroscopy (SEC-MALS-RI-UV) to characterize the reaction efficiency, degree of substitution, and valency of the products of conjugation of either peptides or proteins to a biopolymer scaffold, i.e., hyaluronic acid (HyA). Molecular characterization was more complete compared to estimates from a protein quantification assay, and exploitation of this method led to more accurate deduction of the molecular structures of polymer bioconjugates. Information obtained using this technique can improve macromolecular engineering design principles and help to better understand multivalent macromolecular interactions in biological systems.     

Hormonotoxins: abrogation of ribosome inactivating property of gelonin in the disulfide linked ovine luteinizing hormone-gelonin conjugates.

In order to synthesize a bioeffective hormonotoxin for selective targeting to specific cells in the gonads, gelonin, a single chain ribosome-inactivating protein obtained from an Indian plant called Gelonium multiflorum was covalently linked to ovine luteinizing hormone (oLH) by a disulfide bond. Ovine LH-S-S-gelonin conjugates of different molar ratios were subjected to determine the ribosome-inactivating property in a cell-free translation assay using rabbit reticulocyte lysate system. A single amino group modification with N-succinimidyl-3-(2-pyridyldithio)propionate resulted in a loss of 90% protein synthesis inhibition activity. Upon conjugation of gelonin to oLH, the activity was further inhibited ranging from 2.5-6.4%. A 1:1 to 1:1.5 molar ratio (oLH-S-S-gelonin) conjugates showed 2.5-4.6% activity while 1:2.8 to 1:2.2 molar ratio exhibited 5.5-6.4% inhibition ability.     

Synthesis and characterization of hapten-protein conjugates for antibody production against small molecules

For the generation of antibodies against small hapten molecules, the hapten is cross-linked with some carrier protein to make it immunogenic. However, the formation of such conjugates is not always reproducible. This may lead to inconsistent hapten-protein stoichiometries, resulting in large variations in the generation of the desired antibodies. In the study described here the hapten (mercaptopropionic acid derivative of atrazine) was coupled to carrier protein at five different molar ratios. The hapten-protein conjugates prepared were characterized thoroughly by spectrophotometric absorption, fluorescence, matrix-assisted laser desorption ionization (MALDI), and gel electrophoresis methods, before being used for the immunization and assay purposes. Electrophoresis and fluorescence methods were very useful in detecting hapten-protein cross-linking while MALDI-MS and spectrophotometric detection provided qualitatively comparable hapten density. The production of specific antibodies was sought following the generation of appropriate hapten-protein conjugates. A high antibody titer with moderate antibody specificity was obtained with hapten density around 15 molecules per carrier protein. The study proved useful for monitoring the course of hapten-protein conjugation for the production of specific antibodies against small molecules.     

Distribution of cell surface saccharides on pancreatic cells

We describe here a simple, general procedure for the purification of a variety of lectins, and for the preparation of lectin-ferritin conjugates of defined molar composition and binding properties to be used as probes for cell surface saccharides. The technique uses a “universal” affinity column for lectins and their conjugates, which consists of hog sulfated gastric mucin glycopeptides covalently coupled to agarose. The procedure involes: (a) purification of lectins by chromatography of aqueous extracts of seeds or other lectin-containing fluids over the affinity column, followed by desorption of the desired lectin with its hapten suge; (b) iodination of the lectin to serve as a marker during subsequent steps; (c) conjugation of lectin to ferritin with glutaraldehyde; (d) collection of active lectin-ferritin conjugates by affinity chromatography; and (e) separation of monomeric lectin-ferritin conjugates from larger aggregates and unconjugated lectin by gel chromatography. Based on radioactivity and absorbancy at 310 nm for lectin and ferritin, respectively, the conjugates consist of one to two molecules of lectin per ferrritin molecule. Binding studies of native lectins and their ferritin conjugates to dispersed pancreatic acinar cells showed that the conjugation procedure does not significantly alter either the affinity constant of the lectin for its receptor on the cell surface or the number of sites detected.     

Capillary electrophoresis for the characterization of quantum dots after non-selective or selective bioconjugation with antibodies for immunoassay

Capillary electrophoresis coupled with laser-induced fluorescence was used for the characterization of quantum dots and their conjugates to biological molecules. The CE-LIF was laboratory-built and capable of injection (hydrodynamic and electrokinetic) from sample volumes as low as 4 μL via the use of a modified micro-fluidic chip platform. Commercially available quantum dots were bioconjugated to proteins and immunoglobulins through the use of established techniques (non-selective and selective). Non-selective techniques involved the use of EDCHCl/sulfo-NHS for the conjugation of BSA and myoglobin to carboxylic acid-functionalized quantum dots. Selective techniques involved 1) the use of heterobifunctional crosslinker, sulfo-SMCC, for the conjugation of partially reduced IgG to amine-functionalized quantum dots, and 2) the conjugation of periodate-oxidized IgGs to hydrazide-functionalized quantum dots. The migration times of these conjugates were determined in comparison to their non-conjugated QD relatives based upon their charge-to-size ratio values. The performance of capillary electrophoresis in characterizing immunoconjugates of quantum dot-labeled IgGs was also evaluated. Together, both QDs and CE-LIF can be applied as a sensitive technique for the detection of biological molecules. This work will contribute to the advancements in applying nanotechnology for molecular diagnosis in medical field.     

Quantitative collision‐induced unfolding differentiates model antibody–drug conjugates

Antibody–drug conjugates (ADCs) are antibody‐based therapeutics that have proven to be highly effective cancer treatment platforms. They are composed of monoclonal antibodies conjugated with highly potent drugs via chemical linkers. Compared to cysteine‐targeted chemistries, conjugation at native lysine residues can lead to a higher degree of structural heterogeneity, and thus it is important to evaluate the impact of conjugation on antibody conformation. Here, we present a workflow involving native ion mobility (IM)‐MS and gas‐phase unfolding for the structural characterization of lysine‐linked monoclonal antibody (mAb)–biotin conjugates. Following the determination of conjugation states via denaturing Liquid Chromatography‐Mass Spectrometry (LC–MS) measurements, we performed both size exclusion chromatography (SEC) and native IM‐MS measurements in order to compare the structures of biotinylated and unmodified IgG1 molecules. Hydrodynamic radii (Rh) and collision cross‐sectional (CCS) values were insufficient to distinguish the conformational changes in these antibody–biotin conjugates owing to their flexible structures and limited instrument resolution. In contrast, collision induced unfolding (CIU) analyses were able to detect subtle structural and stability differences in the mAb upon biotin conjugation, exhibiting a sensitivity to mAb conjugation that exceeds native MS analysis alone. Destabilization of mAb–biotin conjugates was detected by both CIU and differential scanning calorimetry (DSC) data, suggesting a previously unknown correlation between the two measurement tools. We conclude by discussing the impact of IM‐MS and CIU technologies on the future of ADC development pipelines.     

Precise construction of oligonucleotide–Fab fragment conjugate for homogeneous immunoassay using HaloTag technology

The use of oligonucleotide–protein conjugates enables the development of novel types of bioanalytical assays. However, convenient methods for producing covalent and stoichiometric oligonucleotide–protein conjugates are still rare. Here we demonstrate, for the first time, covalent conjugation of DNA oligonucleotide to Fab fragments with a 1:1 ratio using HaloTag self-labeling technology. The oligonucleotide coupling was carried out while the Fab was attached to protein G matrix, thereby enabling straightforward production of covalent conjugates. Furthermore, it allowed convenient purification of the product because the unreacted components were easily removed before the elution of the high-purity conjugate. The prepared conjugate was employed in a homogeneous immunoassay where prostate-specific antigen was used as a model analyte. Switchable lanthanide luminescence was used for detection, and the obtained limit of detection was 0.27 ng/ml. In the future, the developed method for covalent conjugation and successive purification in protein G column could also be applied for introducing other kinds of modifications to Fab fragments in a simple and site-specific manner.     

Immuno-crossreactivity and toxicity assessment of conjugation products of the cyanobacterial toxin, microcystin-LR

Immunoassays are increasingly used to investigate the production, properties and fates of the cyanobacterial hepatotoxic microcystins in vitro and in vivo. Responses of an ELISA immunoassay to microcystins have been determined using the authentic toxin antigen, microcystin-LR, and conjugation products between the toxin and glutathione, cysteine-glycine and cysteine. The antibodies against microcystin-LR crossreacted with the toxin conjugation products with similar affinities (96-112%) to that of microcystin-LR, when assayed at a concentration of 1 microg l(-1). Toxicity assessment of the conjugates, in comparison to microcystin-LR, indicated a reduction according to mouse bioassay. In vitro protein phosphatase inhibition assay indicated that the conjugates possessed approximately 3-9-fold lower toxicity than microcystin-LR.     

Characterization of TAT-mediated transport of detachable kinase substrates

The conjugation of peptides derived from the HIV TAT protein to membrane-impermeant molecules has gained wide acceptance as a means for intracellular delivery. Numerous studies have addressed the mechanism of uptake and kinetics of TAT translocation, but the cytosolic concentrations and bioavailability of the transported cargo have not been well-characterized. The current paper utilizes a microanalytical assay to perform quantitative single-cell measurements of the concentration and accessibility of peptide-based substrates for protein kinase B (PKB) and Ca(2+)/calmodulin-activated kinase II. The substrate peptide and TAT were conjugated through a releasable linker, either a disulfide or photolabile bond. Free substrate peptide concentrations of approximately 10(-20)-10(-18) moles were attainable in a cell when substrates were delivered utilizing these conjugates. The substrate peptides delivered as a disulfide conjugate were often present in the cytosol as several oxidized forms. Brief exposure of cells loaded with the photolabile conjugates to UVA light released free substrate peptide into the cytosol. Substrate peptide delivered by either conjugate was accessible to cytosolic kinase as demonstrated by the efficient phosphorylation of the peptide when the appropriate kinase was active. After incubation of the conjugated substrate with cells, free, kinase-accessible substrate was detectable in less than 30 min. Release of the majority of loaded substrate peptide from sequestered organelles occurred within 1 h. The utility of the photocleavable conjugates was demonstrated by measuring the activation of PKB in 3T3 cells after addition of varying concentrations of platelet-derived growth factor.     

Vinyl sulfone bifunctional derivatives of DOTA allow sulfhydryl- or amino-directed coupling to antibodies. Conjugates retain immunoreactivity and have similar biodistributions.

We have synthesized a bifunctional vinyl sulfone-cysteineamido derivative of DOTA (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) that can be conjugated to the sulfhydryls of mildly reduced recombinant antibody (chimeric anti-CEA antibody cT84.66) at pH 7 or to the amino groups of lysine residues at pH 9. The conjugation is sulfhydryl specific at pH 7 (case 1), and amino specific at pH 9 (case 2) as long as the antibody has no free sulhydryl groups. At a molar ratio of 50 BCA (bifunctional chelating agent) to mAb, the number of chelates conjugated is 0.8 for case 1, and 4.6 for case 2. The resulting conjugates can be radiolabeled with (111)In to high specific activity (5 mCi/mg) with high efficiency (>95%) at 43 degrees C in 60 min. The radiolabeled conjugates retained >95% immunoreactivity and are stable in serum containing 1mM DTPA over 3 d. When the radiolabeled conjugates were injected into nude mice bearing LS174T human colon tumor xenografts, over 40% ID/g accumulated in tumors during the period 24-72h. Tumor-to-blood ratios were 4.5, 3.5, and 2.5 for the sulfhydryl coupled conjugate at 24, 48, and 72 h, respectively, and 2.7, 2.5, and 2.3 for the amino-coupled conjugate at the same time points. For other organs the biodistributions were nearly identical whether the conjugates were attached via sulfhydryl or amino groups. These novel BCAs are easy to synthesize, offer versatile conjugation options, and give equivalent biodistributions that result in high tumor uptake and good tumor-to-blood ratios.     

Immunoconjugates of doxorubicin and murine antihuman breast carcinoma monoclonal antibodies prepared via an N-hydroxysuccinimide active ester intermediate of cis-aconityl-doxorubicin: preparation and in vitro cytotoxicity

Doxorubicin (DXR) conjugated to murine monoclonal antibodies (MoAb) raised against human breast tumor cells demonstrated a MoAb-specific, molar ratio-dependent in vitro cytotoxicity. These conjugates were prepared on a scale sufficient to allow for subsequent clinical trials (1 to 3 g of MoAb per conjugation reaction). The conjugation reaction proceeded via an N-hydroxysuccinimide (NHS) active ester intermediate of cis-aconityl-DXR (CA-DXR), resulting in a cis-aconitate acid-sensitive linker between the DXR and MoAb. Molar ratios of DXR to MoAb ranged from 40 to 45. The immunoreactivity of conjugated MoAb was only slightly decreased from naked MoAb. When immunoconjugates were incubated with MoAb-reactive tumor cells for 3 hours, specific cell-killing was observed. If the exposure time was lengthened to 18 hours, however, nonspecific killing resulted. Incubation of the immunoconjugate with the nonspecific adsorbant Amberlite XAD-2 caused an average 30% decrease in the DXR-to-MoAb molar ratio, suggesting a population of drug that is tightly but noncovalently associated with MoAb.     

Thermal denaturation of Bungarus fasciatus acetylcholinesterase: Is aggregation a driving force in protein unfolding?

A monomeric form of acetylcholinesterase from the venom of Bungarus fasciatus is converted to a partially unfolded molten globule species by thermal inactivation, and subsequently aggregates rapidly. To separate the kinetics of unfolding from those of aggregation, single molecules of the monomeric enzyme were encapsulated in reverse micelles of Brij 30 in 2,2,4-trimethylpentane, or in large unilamellar vesicles of egg lecithin/cholesterol at various protein/micelle (vesicle) ratios. The first-order rate constant for thermal inactivation at 45 degrees C, of single molecules entrapped within the reverse micelles (0.031 min(-1)), was higher than in aqueous solution (0.007 min(-1)) or in the presence of normal micelles (0.020 min(-1)). This clearly shows that aggregation does not provide the driving force for thermal inactivation of BfAChE. Within the large unilamellar vesicles, at average protein/vesicle ratios of 1:1 and 10:1, the first-order rate constants for thermal inactivation of the encapsulated monomeric acetylcholinesterase, at 53 degrees C, were 0.317 and 0.342 min(-1), respectively. A crosslinking technique, utilizing the photosensitive probe, hypericin, showed that thermal denaturation produces a distribution of species ranging from dimers through to large aggregates. Consequently, at a protein/vesicle ratio of 10:1, aggregation can occur upon thermal denaturation. Thus, these experiments also demonstrate that aggregation does not drive the thermal unfolding of Bungarus fasciatus acetylcholinesterase. Our experimental approach also permitted monitoring of recovery of enzymic activity after thermal denaturation in the absence of a competing aggregation process. Whereas no detectable recovery of enzymic activity could be observed in aqueous solution, up to 23% activity could be obtained for enzyme sequestered in the reverse micelles.     

Monomeric destetrapeptide human insulin from a precursor expressed in Saccharomyces cerevisiae.

Destetrapeptide insulin (DTI, human insulin with B27-30 removed) was obtained from a monomeric precursor (MIP) expressed in Saccharomyces cerevisiae through tryptic transpeptidation in the presence of synthetic tetrapeptide Gly-Phe-Phe-Tyr. The in vivo biological activity of DTI, determined by mouse convulsion assay, is 22 IU/mg. Its binding activity with insulin receptor on human placental membrane is 80% and its in vitro biological activity, determined by free fat cell assay, is 77%. Compared with native insulin, DTI molecules do not associate in solution but exist in the monomeric form, thus leading to its rapid utilization in vivo.