Physical properties of Escherichia coli P pili measured by optical tweezers

The mechanical behavior of individual P pili of uropathogenic Escherichia coli has been investigated using optical tweezers. P pili, whose main part constitutes the PapA rod, composed of approximately 10(3) PapA subunits in a helical arrangement, are distributed over the bacterial surface and mediate adhesion to host cells. They are particularly important in the pathogenesis of E. coli colonizing the upper urinary tract and kidneys. A biological model system has been established for in situ measurements of the forces that occur during mechanical stretching of pili. A mathematical model of the force-versus-elongation behavior of an individual pilus has been developed. Three elongation regions of pili were identified. In region I, P pili stretch elastically, up to a relative elongation of 16 +/- 3%. The product of elasticity modulus and area of a P pilus, EA, was assessed to 154 +/- 20 pN (n=6). In region II, the quaternary structure of the PapA rod unfolds under a constant force of 27 +/- 2 pN (n approximately 100) by a sequential breaking of the interactions between adjacent layers of PapA subunits. This unfolding can elongate the pilus up to 7 +/- 2 times. In region III, pili elongate in a nonlinear manner as a result of stretching until the bond ruptures.     

Hierarchy of globin complexes. The quaternary structure of the extracellular chlorocruorin of Eudistylia vancouverii.

The molecular dimensions of the extracellular, hexagonal bilayer chlorocruorin of the polychaete Eudistylia vancouverii, determined by scanning transmission electron microscopy (STEM) of negatively stained specimens, were diameter of 27.5 nm and height of 18.5 nm. STEM mass measurements of unstained, freeze-dried specimens provided a molecular mass (Mm) of 3480 +/- 225 kDa. The chlorocruorin had no carbohydrate and its iron content was 0.251 +/- 0.021 wt%, corresponding to a minimum Mm of 22.4 kDa. Mass spectra and nuclear magnetic resonance spectra of the prosthetic group confirmed it to be protoheme IX with a formyl group at position 3. SDS/polyacrylamide gel electrophoresis, reversed-phase chromatography and N-terminal sequencing suggested that the chlorocruorin consists of at least three chains of approximately 30 kDa and five chains of approximately 16 kDa; the two types of subunits occur in the ratio 0.26:0.74(+/- 0.08). Complete dissociation of the chlorocruorin at neutral pH in the presence of urea or guanidine hydrochloride, followed by gel filtration, produced elution profiles consisting of three peaks, B, C and D. Fractions B and C consisted of the approximately 16 kDa chains and fraction D consisted of the approximately 30 kDa subunits. Mass measurements of particles in STEM images of unstained, freeze-dried fractions B and C provided Mm of 208 +/- 23 kDa and 65 +/- 12 kDa, respectively, in agreement with 191 +/- 13 kDa and 67 +/- 5 kDa obtained by gel filtration. Particles with Mm = 221 +/- 21 kDa were also observed in STEM images of unstained, freeze-dried chlorocruorin. These results imply that the chlorocruorin structure, in addition to the approximately 30 kDa linker subunits that have 0.26 to 0.47 heme groups/chain, comprises approximately 65 kDa tetramers and approximately 200 kDa dodecamers (trimers of tetramers) of globin chains. The stoichiometry of the tetramer and linker subunits calculated from molar amino acid compositions was 34 +/- 4 and 43 +/- 9. The complete dissociation of the chlorocruorin was accompanied by a 50 to 75% loss of the 55 +/- 14 Ca2+/mol protein, and was decreased to approximately 35% by the presence of 10 to 25 mM-Ca2+. Reassociation of dissociated chlorocruorin was maximal in the presence of 2.5 to 5 mM-Ca2+. The dodecamer and/or tetramer subunits in the absence or presence of Ca2+ exhibited very limited (less than 10%) reassociation into hexagonal bilayer structures, only in the presence of the linker subunit.(ABSTRACT TRUNCATED AT 400 WORDS)     

Crystal structure of the P pilus rod subunit PapA

P pili are important adhesive fibres involved in kidney infection by uropathogenic Escherichia coli strains. P pili are assembled by the conserved chaperone-usher pathway, which involves the PapD chaperone and the PapC usher. During pilus assembly, subunits are incorporated into the growing fiber via the donor-strand exchange (DSE) mechanism, whereby the chaperone's G1 beta-strand that complements the incomplete immunoglobulin-fold of each subunit is displaced by the N-terminal extension (Nte) of an incoming subunit. P pili comprise a helical rod, a tip fibrillum, and an adhesin at the distal end. PapA is the rod subunit and is assembled into a superhelical right-handed structure. Here, we have solved the structure of a ternary complex of PapD bound to PapA through donor-strand complementation, itself bound to another PapA subunit through DSE. This structure provides insight into the structural basis of the DSE reaction involving this important pilus subunit. Using gel filtration chromatography and electron microscopy on a number of PapA Nte mutants, we establish that PapA differs in its mode of assembly compared with other Pap subunits, involving a much larger Nte that encompasses not only the DSE region of the Nte but also the region N-terminal to it.     

Localization of a critical interface for helical rod formation of bacterial adhesion P-pili

Pyelonephritic Escherichia coli cause urinary tract infections that involve the kidneys. Initiation of infection is dependent on P-pili expressed on the bacterial surface. In this work, an essential interface for assembly of the helical rod structure of P-pili has been located on the major pilin subunit, PapA. Based on primary sequence alignment, secondary structure analysis, and quaternary structure modeling of the PapA subunit, we predicted the location of a site that is critical for in vivo assembly of the native macromolecular structure of P-pili. A rigid helical rod of PapA subunits comprising most of the pilus length is stabilized by n to n+3 subunit-subunit interactions, and is important for normal function of these pili. Using site-directed mutagenesis, ultrastructural analysis by electron cryomicroscopy, immunocytochemistry, and molecular modeling we show that residues 106-109 (Asn, Gly, Ala, Gly) are essential for assembly of native P-pilus filaments. Mutation of these residues disrupts assembly of the native P-pilus helix. Extended fibrillar structures do still assemble, verifying that n to n+1 subunit-subunit interactions are maintained in the mutant fiber morphology. Observation of this fibrillar morphology in the mutant fiber was predicted by our modeling studies. These mutant P-pili data validate the predictive value of our model for understanding subunit-subunit interactions between PapA monomers. Alteration of the pilus structure from a 7-8 nm helical rod to a 2 nm fibrillar structure may compromise the ability of these bacteria to adhere and remain bound to the host cell, thus providing a possible therapeutic target for antimicrobial drugs.     

X-ray diffraction and electron microscope studies on the structure of bacterial F pili.

F pili are hollow cylinders with 80 Å outer diameter and 20 Å inner diameter. Both X-ray fibre diffraction and optical diffraction of electron micrographs show a strong layer-line corresponding to a spacing of 32 Å, to which a J₄ Bessel function is assigned on the basis of the optical diffraction. X-ray diffraction patterns show near-meridional intensity on a layer-line corresponding to a spacing of 12.8 Å, to which a J₁ Bessel function is assigned. Mass per length measurements on unstained specimens in the scanning transmission electron microscope give 3000 daltons/Å, indicating that the 11,200 dalton pilin subunits are 3.7 Å apart along the axial direction of the pili. These observations show that the pilus structure can be represented as four coaxial helices of pitch 128 Å with the pilin subunits elongated and overlapping along the line of these helices. Each of these helices of subunits is translated axially with respect to its neighbour, to give a basic helix of 3.6 units per turn of 12.8 Å pitch. Radial electron density calculations indicate a 50 Å diameter girdle of hydrophobic amino acids between the inner and outer diameters of the protein shell. A molecular model of the structure at low resolution is presented.     

Studies on novel pili from Shigella flexneri. I. Detection of pili and hemagglutination activity.

Pili were detected using electron microscopy in clinical isolates of Shigella flexneri which had been continuously subcultivated in liquid media. Morphologically, the pili appeared as thin, flexible, cylindrical structures of up to 2-5 microns in length and about 3-5 nm in diameter. Two strains showed mannose-resistant (MR) hemagglutination to fresh fowl erythrocytes (type 4), and one to tannic acid-treated horse erythrocyte (type 3) pili. These pili are novel and different from the mannose-sensitive (MS) type 1 pili described by Duguid and Gillies.     

The structure of a filamentous bacteriophage

Many thin helical polymers, including bacterial pili and filamentous bacteriophage, have been seen as refractory to high-resolution studies by electron microscopy. Studies of the quaternary structure of such filaments have depended upon techniques such as modeling or X-ray fiber diffraction, given that direct visualization of the subunit organization has not been possible. We report the first image reconstruction of a filamentous virus, bacteriophage fd, by cryoelectron microscopy. Although these thin ( approximately 70 A in diameter) rather featureless filaments scatter weakly, we have been able to achieve a nominal resolution of approximately 8 A using an iterative helical reconstruction procedure. We show that two different conformations of the virus exist, and that in both states the subunits are packed differently than in conflicting models previously proposed on the basis of X-ray fiber diffraction or solid-state NMR studies. A significant fraction of the population of wild-type fd is either disordered or in multiple conformational states, while in the presence of the Y21M mutation, this heterogeneity is greatly reduced, consistent with previous observations. These results show that new computational approaches to helical reconstruction can greatly extend the ability to visualize heterogeneous protein polymers at a reasonably high resolution.     

Structure of polar pili from Pseudomonas aeruginosa strains K and O

The polar pili of Pseudomonas aeruginosa strains K and O are hollow cylinders with 52 Å outer diameter and 12 Å inner diameter. There is a girdle of low electron density (interpreted as due to a local concentration of hydrophobic amino acid side-chains) centred at 31 Å diameter. Similar X-ray diffraction patterns are obtained from oriented fibres of the two types of pili, to a resolution of 7 Å in the equatorial direction and 4 Å in the meridional direction. The two types of pilin protein subunits have a similar molecular weight, and their sequences contain a number of homologous regions. They form a helical array with 4.06 to 4.08 units per turn of a basic helix that has a pitch of 40.8 Å for strain K pili and 41.3 Å for strain O pili at 75% relative humidity. A method is described for distinguishing between very similar diffraction patterns.There is strong intensity at 10 Å near the equator and at 5 Å near the meridian on the diffraction patterns. This intensity distribution is characteristic of α-helical rods running roughly in the direction of the fibre axis. The orientation of these rods was established by the fit between the transform of an α-helical polyalanine model and the strong near-equatorial layer-line.     

Comparative Biochemical Studies on F and EDP208 Conjugative Pili

EDP208 pili are encoded by a derepressed derivative of a naturally occurring lac plasmid, F(0)lac (incompatibility group FV), originally isolated from Salmonella typhi. EDP208 pili are serologically unrelated to F pili and do not promote infection by F-specific ribonucleic acid bacteriophages. However, they do confer sensitivity to the F-specific filamentous deoxyribonucleic acid phages. EDP208-containing cells are multi-piliated and contain approximately 20 pili per cell. These pili contain a single polypeptide subunit of 11,500 daltons. EDP208-specific RNA phages were readily isolated from local sewage. These phages were somewhat smaller in diameter than the F-specific ribonucleic acid phages and absorbed relatively weakly to EDP208 pili. Comparing EDP208 pilin to F, it was found that both contain the equivalent of two to three hexose units per subunit as well as blocked N-termini. EDP208 pilin contains one covalently linked phosphate residue per subunit, whereas the F pilin subunit contains two such residues. Although notable differences were found in the case of three or four amino acids, the overall amino acid compositions of F and EDP208 were very similar. Moreover, the tryptic peptide maps of the two proteins contained seven peptides with similar mobilities, suggesting considerable homology in their amino acid sequences. Substantial similarities were also noted in the secondary structures of F and EDP208 pilin on the basis of circular dichroism studies. The alpha-helix content of both proteins was calculated to be 65 to 70%. X-ray fiber diffraction studies have indicated that the arrangements of subunits in F and EDP208 pili are also similar. It was concluded that F and EDP208 pili are closely related structures.     

Organization of designed nanofibrils assembled from alpha-helical peptides as determined by electron microscopy.

Self-assembling peptides present attractive platforms for engineering materials with controlled nanostructures. Recently, an alpha-helical fibril forming peptide (alphaFFP) was designed that self-assembles into nanofibrils at acid pH. Circular dichroism spectroscopy, electron-microscopy and x-ray fibre diffraction data showed that the most likely structure of alphaFFP fibrils is a five-stranded coiled coil rope. In the present study, scanning transmission electron microscopy (STEM) was used to improve our understanding of the alphaFFP fibril structure. The measurements of fibril mass per length suggest that there are ten alpha-helices in transverse sections of the fibrils. Based on the known data, it is proposed that a predominant fibrillar structure of alphaFFP is a dimer of alpha-helical five stranded protofilaments wrapped around a common axis. It is shown that these structures have an axial dimension of 58 +/- 16 nm and a width of 4 +/- 1 nm. A small number of thin fibrils is also observed in the negative stained preparation and STEM images. The thin fibrils may correspond to the single protofilament.     

Bacterial adhesion pili are heterologous assemblies of similar subunits.

P-pili on uropathogenic bacteria are 68-A-diameter rods typically 1 microm in length. These structures project from the outer membrane of Escherichia coli, and contain on their distal tip a thin fibrillum, 25 A in diameter and 150 A long, displaying an adhesin protein responsible for the binding of the bacterium to the surface of epithelial cells lining the urinary tract. Operationally, it is possible to identify three morphologically distinct states of the 68-A-diameter P-pili rods, based on the degree of curvature each can adopt. These states are designated "straight," "curved," and "highly curved." The rods can also be unwound to form thin "threads" that are very similar to the tip fibrillae. Electron microscope data are used to distinguish among these four morphological states and to define limits on the shapes of the pilus proteins. The mechanical properties of the PapA polymers are assessed, and implications of rod polymorphism for pilus function are discussed. A wide variety of data are considered in light of the possibility that all pilins are similar in molecular architecture, with specific differences designed to optimize their specialized functions in the pilus assembly.     

Analysis of the PilQ secretin from Neisseria meningitidis by transmission electron microscopy reveals a dodecameric quaternary structure

PilQ is a member of the secretin family of outer membrane proteins and is specifically involved in secretion of type IV pili in Neisseria meningitidis, Neisseria gonorrhoeae, and Pseudomonas aeruginosa. The quaternary structure of PilQ from N. meningitidis was analyzed by transmission electron microscopy by using a negative stain. Single particle averaging was carried out with a total data set of 650 individual particles, which produced a projection map generated from 296 particles at an estimated resolution of 2.6 nm. Oligomeric PilQ adopts a donut-like structure with an external ring that is 16.5 nm in diameter surrounding a central cavity that is 6.5 nm in diameter. Self-rotation and power spectrum analysis demonstrated the presence of 12-fold rotational symmetry, showing that PilQ is organized as a ring of 12 identical subunits. A model of the type IV meningococcal pilus fiber, based on the X-ray crystal structure of the N. gonorrhoeae pilin subunit, fitted neatly into the cavity, demonstrating how PilQ could serve as a channel for the growing pilus fiber.     

Dynamic force spectroscopy of E. coli P pili

Surface organelles (so-called pili) expressed on the bacterial membrane mediate the adhesion of Escherichia coli causing urinary tract infection. These pili possess some extraordinary elongation properties that are assumed to allow a close bacterium-to-host contact even in the presence of shear forces caused by urine flow. The elongation properties of P pili have therefore been assessed for low elongation speeds (steady-state conditions). This work reports on the behavior of P pili probed by dynamic force spectroscopy. A kinetic model for the unfolding of a helixlike chain structure is derived and verified. It is shown that the unfolding of the quaternary structure of the PapA rod takes place at a constant force that is almost independent of elongation speed for slow elongations (up to approximately 0.4 mum/s), whereas it shows a dynamic response with a logarithmic dependence for fast elongations. The results provide information about the energy landscape and reaction rates. The bond length and thermal bond opening and closure rates for the layer-to-layer bond have been assessed to approximately 0.76 nm, approximately 0.8 Hz, and approximately 8 GHz, respectively. The results also support a previously constructed sticky-chain model for elongation of the PapA rod that until now had been experimentally verified only under steady-state conditions.     

Structure and function of Hib pili from Haemophilus influenzae type b

Pathogenic bacteria are specifically adapted to bind to their customary host. Disease is then caused by subsequent colonization and/or invasion of the local environmental niche. Initial binding of Haemophilus influenzae type b to the human nasopharynx is facilitated by Hib pili, filaments expressed on the bacterial surface. With three-dimensional reconstruction of electron micrograph images, we show that Hib pili comprise a helix 70 A in diameter with threefold symmetry. The Hib pilus filament has 3.0 subunits per turn, with each set of three subunits translated 26.9 A along and rotated 53 degrees about the helical axis. Amino acid sequence analysis of pilins from Hib pili and from P-pili expressed on uropathogenic Escherichia coli were used to predict the physical location of the highly variable and immunogenic region of the HifA pilin in the Hib pilus structure. Structural differences between Hib pili and P-pili suggest a difference in the strategies by which bacteria remain bound to their host cells: P-pili were shown to be capable of unwinding to five times their original length (E. Bullitt and L. Makowski, Nature 373:164-167, 1995), while damage to Hib pili occurs by slight shearing of subunits with respect to those further along the helical axis. This capacity to resist unwinding may be important for continued adherence of H. influenzae type b to the nasopharynx, where the three-stranded Hib pilus filaments provide a robust tether to withstand coughs and sneezes.     

Crystal structure and morphology of poly(12-dodecalactone)

Poly(12-dodecalactone) (PDDL) crystals in the form of chain-folded lamellae were prepared by isothermal crystallization from a 1-hexanol solution. The lozenge-shaped crystals with and without spiral growth have been studied by transmission electron microscopy and atomic force microscopy. Wide-angle X-ray diffraction data, obtained from PDDL lamellae sedimented to form oriented mats and annealed solvent-cast film, were supplemented with morphological and structural data from electron microscopy. PDDL crystallizes as an orthorhombic form with a P2(1)2(1)2(1) space group and lattice constants of a = 0.746 +/- 0.001 nm, b = 0.500 +/- 0.001 nm, and c (chain axis) = 3.281 +/- 0.003 nm. There are two chains per unit cell, which existed in an antiparallel arrangement. The fiber repeat distance is appropriate for an all-trans backbone conformation for the straight stems. Molecular packing of this structure has been studied in detail, taking into account both diffraction data and energy calculations. The setting angles, with respect to the a axis, were +/-43 degrees for the corner and center chains according to intensity measurements and structure factor calculations. The optimized shift along the crystallographic c axis is 0.1c (0.328 nm). A final model was obtained to yield R = 0.180 with X-ray diffraction data and R = 0.162 with electron diffraction data. A brief comparison is also made with related polymer structures.     

Image analysis of Artemia salina ribosomes by scanning transmission electron microscopy.

A dedicated scanning transmission electron microscope (STEM) at Brookhaven National Laboratory was used to visualize unstained freeze-dried ribosomal particles under conditions which considerably reduce the specimen distortion inherent in the heavy metal staining and air-drying preparative steps used in routine transmission electron microscopy (TEM). From high-resolution STEM images it is possible to determine molecular mass and the mass distribution within individual ribosomal particles and perform statistical evaluation of the data. Analysis of digitized STEM images of Artemia salina ribosomes provided evidence that a standard preparation of these eukaryotic ribosomes consists of a population of heterogenous particles. Because of the integrity of rRNAs established by agarose gel electrophoresis, variations in the composition and structure of the 80S monosomes and the large (60S) and small (40S) ribosomal subunits, as monitored by their mass, were attributed to the loss of ribosomal proteins, from the large subunits in particular. These results are relevant not only to the degree of ribosomal biological activity, but should also be taken into consideration for particle selection in the reconstruction of the "native" eukaryotic ribosome 3-D model.     

Branched-chain alpha-keto acid dehydrogenase complex from bovine kidney: radial distribution of mass determined from dark-field electron micrographs

Scanning transmission electron microscopy (STEM) was used to determine the radial distribution of mass within the bovine kidney branched-chain alpha-keto acid dehydrogenase complex (E1-E2) and its core enzyme, dihydrolipoamide acyltransferase (E2). The particle mass of E2 measured by STEM is (1.19 +/- 0.02) x 10(6). Assuming 24 subunits per E2 core, this value corresponds to a subunit molecular weight of (4.96 +/- 0.08) x 10(4), which agrees well with the subunit molecular weight estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis of 5.2 x 10(4) (Pettit et al., 1978) and that deduced from the gene sequence, 46,518 (Griffin et al., 1988). Thus, the STEM data reaffirms the 24-subunit model for this E2. Previous studies indicated that the E2 subunits contain an extended, outer lipoyl-bearing domain connected by a trypsin-sensitive segment to a compact, inner catalytic domain. The assemblage of 24 inner domains comprises a cubelike inner core. The quantity and spatial distribution of mass determined from STEM images for the E2 inner core are consistent with this model. The lipoyl-bearing domains are shown to occupy a zone defined by radii of 80-130 A over which the lipoyl moiety may range. This zone overlaps the positions of the 24 branched-chain alpha-keto acid dehydrogenase (E1) molecules, which apparently are located on the of the cubelike inner core.     

Identification and electron microscopic analysis of a chaperonin oligomer from Neurospora crassa mitochondria.

A 7-fold symmetric particle has been identified in Neurospora crassa which is most probably the mitochondrial chaperonin. The particle, about 12 nm in diameter, appears in preparations of cytochrome reductase, and is shown to contain a 60 kd protein which cross-reacts with anti-GroEL antibodies. Results of STEM mass measurement suggest that the particle is composed of 14 subunits. A preliminary interpretation of the structure of the particle based on electron microscopy is given. Its quaternary structure and molecular weight are similar to those of the recently discovered family of particles called chaperonins, found in bacteria, chloroplasts and mitochondria.     

The differential affinity of the usher for chaperone–subunit complexes is required for assembly of complete pili

Attachment to host cells via adhesive surface structures is a prerequisite for the pathogenesis of many bacteria. Uropathogenic Escherichia coli assemble P and type 1 pili for attachment to the host urothelium. Assembly of these pili requires the conserved chaperone/usher pathway, in which a periplasmic chaperone controls the folding of pilus subunits and an outer membrane usher provides a platform for pilus assembly and secretion. The usher has differential affinity for pilus subunits, with highest affinity for the tip‐localized adhesin. Here, we identify residues F21 and R652 of the P pilus usher PapC as functioning in the differential affinity of the usher. R652 is important for high‐affinity binding to the adhesin whereas F21 is important for limiting affinity for the PapA major rod subunit. PapC mutants in these residues are specifically defective for pilus assembly in the presence of PapA, demonstrating that differential affinity of the usher is required for assembly of complete pili. Analysis of PapG deletion mutants demonstrated that the adhesin is not required to initiate P pilus biogenesis. Thus, the differential affinity of the usher may be critical to ensure assembly of functional pilus fibres.     

Biogenesis of E. coli Pap pili: papH, a minor pilin subunit involved in cell anchoring and length modulation

The biogenesis of Escherichia coli Pap pili, encoded by the pap gene cluster, was studied. A novel gene, papH, was identified and found to encode a weakly expressed pilin-like protein. PapH was dispensable for digalactoside-specific binding and for formation of Pap pili. However, in papH deletion mutants 50%-70% of total pilus antigen was found free of the cells. We present evidence showing coregulation of papH and the adjacent gene, papA, which encodes the major pilin subunit. A decrease in the PapA to PapH ratio resulted in a large fraction of cells producing shortened pili, whereas overproduction of PapA relative to PapH resulted in cells with lengthened pili. The data show that PapH has roles in anchoring the pilus to the cell and in modulating pilus length.