Hematoxylin Staining of Tissues Embedded in Epoxy Resins

Sections of 0.5-2 μ thickness are affixed to slides with albumen adhesive, thoroughly dried, and placed in xylene or toluene for 1 hr, then brought through ethanol to water. Sections of tissue fixed in O_sO₄ are treated first in 0.1% KMnO₄, then with 1.0% oxalic acid, and after rinsing, incubated at 60 C for 12-24 hr in hematoxylin (Harris's or Ehrlich's) and counterstained 10-15 min with 0.5% phloxine B. Permanent preparations are made by clearing and mounting in a synthetic resin. The method requires only easily available reagents and is suitable for routine processing of epoxy sections.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

A HYDROXYL-DEPENDENT SILVER METHOD FOR NERVE AXOPLASM

Axoplasm is selectively impregnated by the following steps: (1) fixation in 10% formalin or in 10% formalin with added sucrose, 15%, and concentrated NH₄OH, 1%, for 1-7 days; (2) frozen sections; (3) extraction of the sections in 95% ethyl alcohol, absolute alcohol, xylene, and 95% ethyl alcohol and absolute alcohol, 1 hr each; (4) distilled water, 3 changes of 10 min each; (5) 20% AgNO₃ (aq.) at 25°C, 30 min; (6) distilled water, 3 changes of 1-2 sec each; (7) 6.9% K₂CO₃, 1 hr; (8) water, 3 changes of about 1 min each; (9) 0.2%AuCl₃, 2 min; (10) distilled water; (11) 5% Na₂S₂O₃, 2 min; (12) washing, clearing and mounting. This procedure is proposed as a simplified stain for axoplasm, with other tissue components remaining unstained. The few reagents necessary suit this method for histochemical investigation of the mechanism of silver staining.     

Silver Protein Staining of Nerve Fibers in Celloidin Sections

Celloidin sections from formalin-fixed brain and spinal cord of primates are stored in 70% alcohol after cutting, soaked in 2% pyridine in 50% alcohol for 6-8 hr at 37 C, and transferred to 1% concentrated NH₄OH in 50% alcohol 15-18 hr at 20-25 C. After washing and flattening, the sections are transferred to 1% silver protein solution containing 30 ml of 0.2 M H₃BO₃/100 ml. Impregnation is accomplished in 50 ml screw-top jars, 50 mm in diameter, which are filled to a depth of 35 mm, and have 1 gm of copper foil, 0.002 inch thick added. The foil is folded in loose accordion-fashion, pierced and threaded, cleaned in 5% HNO₃, rinsed in distilled water, and suspended in the solution just above the sections by fastening the thread to the jar lid. The sections are impregnated for 24 hr at 37 C, rinsed in distilled water, reduced in a solution of 5% Na₂SO₃ and 1% hydroquinone for 10 min, washed in distilled water and toned in 0.2% gold chloride for 5 min. After rinsing in distilled water, the sections are transferred to 1% oxalic acid for 45-60 sec, washed in distilled water and placed in 5% Na₂S₂O₃ for 5 min. Sections are then washed, dehydrated to 95% alcohol, cleared in terpineol, followed by 3 changes in xylene, and mounted.     

Enhanced Reliability in Silver Impregnation of Terminal Axonal Degeneration-Original Nauta Method

Brains of rat with surgical lesions 3-5 days old are fixed in 10% neutralized formalin (excess of CaCO₃), 20 μ serial frozen sections cut therefrom and kept in neutralized formalin for an additional 24-48 hr. The sections are soaked in distilled water 12-24 hr, transferred to 50% alcohol containing 0.75 ml of concentrated NH₄OH (sp. gr. 0.91) per 100 ml 12-24 hr, placed in distilled water 2-3 hr and then in silver-pyridine solution (AgNO₃ 3% aq., 20 ml; pyridine, 1 ml) for 48 hr. Test sections are transferred directly to each one of 3 ammoniated silver-solutions, pH 12.8, 13.0 and 13.2, made as follows: To 200 ml of solution 1 (silver nitrate, 6.4 gm; alcohol 96%, 220 ml; NH₄OH (sp. gr. 0.91), 28 ml and distilled water, 440 ml) is added respectively 8-12 ml, 12-16 ml and 16-20 ml of solution 2 (2% NaOH) to give the pH desired. The test sections are studied and the optimal ammoniated silver solution chosen. Two baths of ammoniated silver are used, the section placed with continuous agitation into the first bath for 30 sec and the second bath for 60 sec. The sections are then transferred directly into a reducing bath (formalin 10%, 2ml; alcohol 96%, 5 ml; citric acid 1%, 1.5 ml and distilled water, 4.5 ml) for 2 min and from there to 5% Na₂S₂O₃ for 1 min, rinsed in 3 changes of distilled water, dehydrated and mounted.     

A Phloxine-Azure-Hematoxylin Sequence for Differential Staining of Cells in Pancreatic Islets

Sections of 6 μ from tissues fixed in Susa or in Bouin's fluid (without acetic acid) and embedded in paraffin were attached to slides with Mayer's albumen, dried at 37 C for 12 hr, deparaffinized and hydrated. The sections fixed in Susa were transferred to a I₂-K₁ solution (1:2:300 ml of water); rinsed in water, decolorized in 5% Na₂S₂O₃; washed in running water, and rinsed in distilled water. Those fixed in Bouin's were transferred to 80% alcohol until decolorized, then rinsed in distilled water. All sections were stained in 1% aqueous phloxine, 10 min; rinsed in distilled water and transferred to 3% aqueous phosphotungstic acid, 1 min; rinsed in distilled water; stained 0.5 min in 0.05 azure II (Merck), washed in water; and finally, nuclear staining in Weigert's hematoxylin for 1 min was followed by a rinse in distilled water, rapid dehydration through alcohols, clearing in xylene and covering in balsam or a synthetic resin. In the completed stain, islet cells appear as follows: A cells, purple; B cells, weakly violet-blue; D cells, light blue with evident granules; exocrine cells, grayish blue with red granules.     

Bromphenol Blue as A Stain for Muscle Striations

Sections from formalin-fixed muscle are stained 4-24 hr with a 0.05% solution of bromphenol blue in 2% acetic acid, rinsed with water and placed in 0.5% acetic acid for 5-10 min. They are then treated 30 sec with tap water substitute (KHCO₃, 0.2 gm; MgSO₄, 2 gm; distilled water, 100 ml), rinsed, dehydrated in alcohol, cleared in xylene and covered in a polystyrene mountant Striatums of both cardiac and skeletal muscle fibers are fully resolved under oil immersion, against the blue background of the other parts of the fibers.     

A Protargol Method for Staining Nerve Fibers in Frozen or Celloidin Sections

Extensive experimentation with protargol staining of neurons in celloidin and frozen sections of organs has resulted in the following technic: Fix tissue in 10% aqueous formalin. Cut celloidin sections IS to 25 μ, frozen sections 25 to 40 μ. Place sections for 24 hours in 50% alcohol to which 1% by volume of NH₄OH has been added. Transfer the sections directly into a 1% aqueous solution of protargol, containing 0.2 to 0.3 g. of electrolytic copper foil which has been coated with a 0.5% solution of celloidin, and allow to stand for 6 to 8 hours at 37° C. Caution: In this and the succeeding step the sections must not be allowed to come in contact with the copper. From aqueous protargol, place the sections for 24 to 48 hours at 37° C. directly into a pyridinated solution of alcoholic protargol (1.0% aqueous solution protargol, 50 ml.; 95% alcohol, 50 ml.; pyridine, 0.5 to 2.0 ml.), containing 0.2 to 0.3 g. of coated copper. Rinse briefly in 50% alcohol and reduce 10 min. in an alkaline hydroquinone reducer (H₃BO₃, 1.4 g.; Na₂SO₃, anhydrous, 2.0 g.; hydroquinone, 0.3 g.; distilled water, 85 cc; acetone, 15 ml.). Wash thoroly in water and tone for 10 min. in 0.2% aqueous gold chloride, acidified with acetic acid. Wash in distilled water and reduce for 1 to 3 min. in 2% aqueous oxalic acid. Quickly rinse in distilled water and treat the sections 3 to 5 min. with 5% aqueous Na₂S₂O₃+5H₂O. Wash in water and stain overnight in Einarson's gallocyanin. Wash thoroly in water and place in 5% aqueous phosphotungstic acid for 30 min. From phosphotungstic acid transfer directly to a dilution (stock solution, 20 ml.; distilled water, 30 ml.) of the following stock staining solution: anilin blue, 0.01 g.; fast green FCF, 0.5 g.; orange G, 2.0 g.; distilled water, 92.0 ml.; glacial acetic acid, 8 ml.) and stain for 1 hour. Differentiate with 70% and 95% alcohol; pass the sections thru butyl alcohol and cedar oil; mount.     

Differentiated Staining of Osmium Tetroxide-Fixed, Vestopal-w-Embedded Tissue in thin Sections

Tissues were fixed at 20° C for 1 hr in 1% OsO₄, buffered at pH 7.4 with veronal-acetate (Palade's fixative), soaked 5 min in the same buffer without OsO₄, then dehydrated in buffer-acetone mixtures of 30, 50, 75 and 90% acetone content, and finally in anhydrous acetone. Infiltration was accomplished through Vestopal-W-acetone mixtures of 1:3, 1:1, 3:1 to undiluted Vestopal. After polymerisation at 60° C for 24 hr, 1-2 μ sections were cut, dried on slides without adhesive, and stained by any of the following methods. (1) Mayer's acid hemalum: Flood the slides with the staining solution and allow to stand at 20°C for 2-3 hr while the water of the solution evaporates; wash in distilled water, 2 min; differentiate in 1% HCl; rinse 1-2 sec in 10% NH,OH. (2) Iron-trioxyhematein (of Hansen): Apply the staining solution as in method 1; wash 3-5 min in 5% acetic acid; restain for 1-12 hr by flooding with a mixture consisting of staining solution, 2 parts, and 1 part of a 1:1 mixture of 2% acetic acid and 2% H₂SO₄ (observe under microscope for staining intensity); wash 2 min in distilled water and 1 hr in tap water. (3) Iron-hematoxylin (Heidenhain): Mordant 6 hr in 2.5% iron-alum solution; wash 1 min in distilled water; stain in 1% or 0.5% ripened hematoxylin for 3-12 br; differentiate 8 min in 2.5%, and 15 min in 1% iron-alum solution; wash 1 hr in tap water. (4) Aceto-carmine (Schneider): Stain 12-24 hr; wash 0.5-1.0 min in distilled water. (5) Picrofuchsin: Stain 24-48 hr in 1% acid fuchsin dissolved in saturated aqueous picric acid; differentiate for only 1-2 sec in 96% ethanol. (6) Modified Giemsa: Mix 640 ml of a solution of 9.08 gm KH₂PO₄ in 1000 ml of distilled water and 360 ml of a solution of 11.88 gm Na₂HPO₄-2H₂O in 1000 ml of distilled water. Soak sections in this buffer, 12 hr. Dissolve 1.0 gm of azur I in 125 ml of boiling distilled water; add 0.5 gm of methylene blue; filter and add hot distilled water until a volume of 250 ml is reached (solution “AM”). Dissolve 1.5 gm of eosin, yellowish, in 250 ml of hot distilled water; filter (solution “E”). Mix 1.5 ml of “AM” in 100 ml of buffer with 3 ml of “E” in 100 ml of buffer. Stain 12-24 hr. Differentiate 3 sec in 25 ml methyl benzoate in 75 ml dioxane; 3 sec in 35 ml methyl benzoate in 65 ml acetone; 3 sec in 30 ml acetone in 70 ml methyl benzoate; and 3 sec in 5 ml acetone in 95 ml methyl benzoate. Dehydrated sections may be covered in a neutral synthetic resin (Caedax was used).     

Orthochromatic, Species-Limited Staining of Mast Cells With Night Blue

Night blue will stain the mast cells of rat, mouse and hamster selectively if alcohol differentiation is controlled. The technical steps are: Dewax paraffin sections with xylene, 2 changes; air dry; 2% Na₂SO₄, 3-5 sec; 0.5% night blue in 10% ethanol, 1 hr at 60°C; rinse in water; 9% HNO₃, 15 sec; water 1-5 min; 70% ethanol, 2 changes, 30 sec each; wash; 0.01% safranin, 3-5 sec; rinse, blot, air dry, mount in synthetic resin. A clear orthochromatic stain of the mast-cell granules occurs. Acid fixation prevents the staining reaction.     

A Controllable Differential Stain for the Hypophysis by Adaptation of the Mallory Triple Stain

A selective and controllable staining method for the hypophysis has been developed with rat material, using Mallory's triple stain as a basis.

Fix in Zenker neutral formol for 6 hours. Longer fixation is undesirable. Transfer to 30% alcohol plus a few drops of a saturated solution of I₂ in aqueous KI over night. Gradually complete dehydration and clear in cedar oil. Infiltrate with a paraffin mixture (paraffin, rubber-paraffin, bayberry wax and beeswax). Section 3-Sμ. Hydrate to distilled water, placing a few drops of a KI-I₂ solution in the 50% alcohol. Stain in 1% acid fuchsia for 30 minutes. Rinse, and differentiate in a weak NH₄OH solution (one drop 28% NH₄OH to 200 cc. HOH). When differentiation is complete, transfer to a 0.5% phosphomolybdic acid solution for 3 minutes, after first stopping the differentiation with a 0.1% HC1 solution and then rinsing with distilled water. Stain for one hour in a solution of: 1% anilin blue, water soluble, 2% orange 6, and 1% phosphomolybdic acid. Rinse in distilled water plus a few cubic centimeters of the stain. Differentiate in 95% alcohol, transfer to absolute alcohol and clear in a mixture of 30% oil of cedar, 40% oil of thyme, 15% absolute alcohol and 15% xylene. Finally, transfer to xylene and mount.     

Basic Dye Counterstaining of Sections Impregnated by the Golgi-Cox Method

Celloidin blocks of Golgi-Cox impregnated material are cut at 50 μ, the sections collected in 70% alcohol, transferred to a 3:1 mixture of absolute alcohol and chloroform for 2 min, and then stored in xylene or toluene for at least 3 min, or up to 2 wk until processed further. Mounting is done on glass slides which have been coated with fresh egg albumen diluted in 0.2% ammonia water (or a 0.5% solution of dry powdered egg albumen) and then dried at 60°C overnight. For attachment to these coated slides, sections are first soaked for 2-3 min in a freshly prepared mixture of methyl benzoate, 50 ml; benzyl alcohol, 200 ml; chloroform, 150 ml; and then transferred quickly to the slides by means of a brush. After 2-3 min the chloroform evaporates and the celloidin softens. The slides are then immersed in toluene which hardens the celloidin and anchors the sections to the slides. Alcohols of descending concentrations to 40% are followed by alkalinizations, first in: absolute alcohol, 40 ml; strong ammonia water 60 ml, for 2 min, then in: absolute alcohol, 70 ml; strong ammonia water, 30 ml, for 1 hr. Excess alkali is then removed by 70% and 40% alcohol, 2 min each, and a 10 min wash in running tap water. Bleaching in 1% Na₂S₂O₃, for 10 min and washing again in tap water for 10 min completes the process preliminary to staining. The preparations are then stained for 90 min in an aqueous solution of either 0.5% cresylecht violet, neutral red, or Darrow red, buffered at pH 3.6. Dehydration and differentiation in ascending grades of alcohol, clearing with toluene or xylene, and applying a cover glass with a mounting medium having a refractive index of about 1.61 completes the process.     

A Tungstate Modification of the Golgi-Cox Method

Pieces of fresh nervous tissue 4-5 mm thick are put into the following solution: HgCl₂, 1 gm; K₂Cr₂O₇, 1 gm; K₂CrO₄, 0.8 gm; K₂WO₄ (or Na₂WO₄), 0.5 gm; distilled water 100 ml. They are kept undisturbed in the dark at room temperature for 20-30 days, then transferred to the following alkaline solution: LiOH (or NaOH), 1 gm; KNO₃, 15 gm; distilled water, 100 ml. After 12-24 hr in this solution they are washed for 12-24 hr in several changes of distilled water. (If sodium hydroxide was used, 0.5 ml of acetic acid should be added per 100 ml of wash water.) Embedding in celloidin follows dehydration. Sections are dehydrated in 3 parts of absolute alcohol and 1 part of chloroform, cleared in iodobenzene and mounted with a cover slip using a mounting medium with a refractive index around 1.61. The use of tungstate improves the general results and allows especially successful impregnations in very young animals, when the usual technic fails.     

Processing Gossypium Microspores for First-Division Chromosomes

A procedure developed for the observation of the first-division chromosomes of the thick-walled microspores of Gossypium is as follows: fixation in 3:1 ethyl alcohol-propionic acid followed by soaking in 70% alcohol for 24 hr; maceration in a 2:1:1 mixture of 15% CrO₃, 10% HNO₃, and 5% HCl for 5-7 min; hardening in 1.1 ethyl alcohol-propionic acid; and staining in acetocarmine.     

Protective Paraffin Infiltration of Soft Tissues in Insects to Facilitate Softening of Hard Exoskeletons

This technique can produce serial sections as thin as 5 μ from hard chitin-covered materials of insects or other arthropods. Procedures: Fix with alcoholic Bouin's fluid for 3 hr. Henceforth subject material to partial vacuum in each step to ensure a final proper embedding. Wash with 80% ethanol 2 or 3 times for 2 hr or until the picric acid is largely removed. Dehydrate to 90% ethanol and give 2 changes of n-butanol 2 hr each, and one of a 1:1 n-butanol-paraffin mixture in 56-57° oven for 12 hr. Finally, use 2 baths of pure paraffin, 3 hr each, to complete the infiltration. After the last bath, withdraw the specimen from the paraffin, and remove the superficial paraffin, first mechanically and then with a xylene bath for 4 min. Rinse first with n-butanol, and afterwards with absolute ethanol, 2 min each. The compound eyes are protected with a paraffin covering, the specimen is hydrated with a 1% aqueous solution of detergent for 1 hr and then washed with running tap water. The material is treated with a concentrated sulfuric-nitric mixture (H₂SO₄:HNO₃) for 4 hr to eliminate the exoskeleton. After this treatment, the specimen is washed with running tap water for 12 hr, dehydrated with acetone and then bathed in a 2% solution of celloidin in ethyl acetate to form a protective artificial cuticle. This coating is hardened with 2 quick baths of chloroform, the specimen reembedded in paraffin, and the block cast for sectioning.     

Gross Demonstration of the Mammalian Atrioventricular Bundle by A Periodic Acid-Schiff Procedure

The following procedure stains the atrioventricular conduction system selectively. (1) Wash the fresh heart with physiological saline solution to free it of blood; (2) fix it in 10% formalin containing 0.5% HIO₄ for 1 hr; (3) wash in 3 changes of distilled water for 20 min; (4) keep in 80% alcohol for 12 hr to 2 wk; (5) wash with distilled water; (6) treat with a dilute Schiff's reagent containing 0.1 gm of basic fuchsin per 100 ml for 0.5-2 min; (7) rinse in three changes of 2% Na₂SO₃ in 0.2 N HCI for 3-5 min; (8) wash and examine in 80% alcohol; store in 80% alcohol.     

A Controllable Silver Stain for Nerve Fibers and Nerve Endings

A paraffin section method is described with a yellow-brown-black color range comparable to that of Ranson's pyridine silver block stain. After impregnation with activated protargol and reduction with a fine grain photographic developer, silver nitrate impregnation and reduction are repeated as often as necessary. The procedure is as follows:

Place hydrated sections of tissue fixed in chloral hydrate (25 g. in 100 ml. of 50% alcohol) in 1% aqueous protargol (Winthrop Chemical Co.) containing 5-6 g. metallic copper for 12-24 hours. After rinsing in 2 changes of distilled water, reduce 5 to 10 minutes in: Elon (Eastman Kodak Co.) 0.2 g., Na₂SO₃, dessicated, 10 g., hydroquinone 0.5 g., sodium borate powder 0.1 g., distilled water 100 ml. Wash thoroly in 4 or 5 changes of distilled water and place in 1% aqueous AgNO₃ for 10-20 minutes at 28°-50° C. Rinse in 2 or 3 changes of distilled water and reduce in the elon-hydroquinone solution. After thoroly washing in 4 or 5 changes of distilled water, examine under microscope.

If too pale, treat again in silver nitrate for 10-20 minutes, rinse, reduce 5-10 minutes and wash thoroly until nerve fibers show distinct microscopic differentiation, then dehydrate, clear and mount.     

Differential Staining of Gastric Glandular Cells

Fundus of stomach is fixed in 10% formalin (aqueous), Bouin's fluid or 5% trichloracetic acid (aqueous). It is embedded in paraffin, and 7μ sections are cut, mounted, deparaffinized and passed to 70% alcohol and then stained as follows: Mordant 3 min. in saturated Bismarck brown in 70% alcohol. Rinse in 70% alcohol, pass to distilled water, then overstain (2 hr.) in aniline blue, 0.5% solution in 2.5% acetic acid (aqueous). Precipitate the anilin blue with 0.5 ml. of 0.1% methyl violet solution (aqueous) dropped on die slide. Leave on 2 min. or less. Wash and differentiate in 70% alcohol. (Parietal cells dark blue). Stain 30 min. in a mixture of hematein, 0.10g.; A1C13 cryst., 0.05g.; and 70% alcohol 50 ml., prepared just before use and not filtered. Rinse in 70% alcohol and differentiate with an alcoholic extract of saffron (2 g. saffron pistils in 100 ml. 90% alcohol at 60°C. for 6 hr.) while observing the progress of differentiation microscopically. Dehydrate by dropping a 0.1 % solution of acetic acid in absolute alcohol on the section for 30 sec., followed by pure absolute alcohol, xylene, and covering in balsam.     

Mercuric Bromphenol Blue Staining of Precipitin Lines in Agar

Lines formed by antibody-organ antigen reactions are stained particularly well by a modification utilizing the mercuric bromphenol blue (MBB) mixture of Mazia et al. (Biol. Bull., 104: 57-67, 1953). The agar covered slides are placed overnight in 0.85% NaCI at 4 C, followed by washing for 2 hr in 0.85% NaCI at 25 C. They are then rinsed for 10 min in distilled water, and dried overnight at 37 C. The precipitin lines are fixed by immersing the slides for 25 min in 95% alcohol, followed by 5 min hydration in distilled water. They are stained for 25 min in MBB mixture (HgCI₂, 10 gm; bromphenol blue, 0.1 gm; 95% ethanol, 100 ml). Excess stain is removed by immersing in acidified alcohol (95% ethanol, 98 ml; glacial acetic acid, 2 ml). Finally, the slides are passed through alcohol and xylene, and resin-mounted under coverslips.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5–2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3–5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5–30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12–16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1–2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.