The kinetics and mechanism of oxidation of maltose and lactose by Tl(III) in acidic media

The kinetics of the cleavage of d-arabino-hexos-2-ulose (1) and of glyoxal (2) with hydrogen peroxide in alkaline water and in 44% (w/w) ethanol-water solutions (pOH 0.5-5) were studied over a temperature range of ?25 to +25°. The relative rate of the competing reactions of 1 with the cleavage in 0.03-1M sodium hydroxide was determined from the rate of formation of hydrogen peroxide in the oxidation of d-glucose to 1 with 2-anthraquinonesulfonic acid in the presence of oxygen at 25 and 40°. The cleavages of both 1 and 2 were first-order with respect to hydrogen peroxide, and also to hydroxyl ion at low alkalinities. The rate of cleavage of 1 reached a maximum at pOH ～2.5, whereas the competing reactions of 1 and the cleavage of 2 were constantly accelerated with increasing hydroxyl-ion concentration. Unlike 2, compound 1 was cleaved more rapidly in ethanol-water than in water. The activation energies of the cleavage of 1 and 2, and the competing reactions of 1, were 49, 57, and 65 kJ.mol^?1, respectively.     

Solvent controlled anchimeric assistance in some nucleophilic substitutions at platinum(II) square planar derivatives

Kinetics results concerning nucleophilic substitutions of chloride from the complexes [Pt(bipy)(am)Cl]BPh₄ (bipy = α,α′-dipyridyl; am = ethanolamine and ethylamine) in methanol and acetonitrile are reported. The second-order kinetic rate constants together with the solubilities of the reactants provide a basis for the calculation of the transfer chemical potentials for initial and transition state of every reported reaction. The kinetic behaviour of the two complexes is very similar in methanol, but in acetonitrile the ethanolamine derivative reacts about 2–3 times faster than the ethylamine derivative. This difference is interpreted on the basis of a solvent-controlled anchimeric assistance which is provided to the leaving chloride by the dangling hydroxoresidue of the ethanolamine only in the aprotic acetonitrile.     

Manganese(II), iron(II) and nickel(II) chloride complexes with monodeprotonated anionic guanine

Upon refluxing 2:1 mixtures of guanine (guH) and MnCl₂, FeCl₂ or NiCl₂ in a 7:3 (v/v) mixture of ethanol and triethyl orthoformate for 1–2 weeks, partial substitution of gu^? for Cl^? groups occurs, and solid complexes of the M(gu)Cl·2ROH (R = C₂H₅ for M = Mn; R = H for M = Fe, Ni) type are obtained. The new complexes are pentacoordinated and appear to be linear chainlike polymeric species, involving a single-bridged

_n backbone. Coordination number five is attained by the presence of one terminal chloro and two terminal ROH ligands per metal ion. Most probable binding sites of bidentate bridging gu^? are the N(7) and N(9) imidazole ring nitrogens. IR evidence rules out the possibility of coordination of gu^? through any of the exocyclic potential ligand sites (O(6) oxygen or N(2) nitrogen) [1].     

Stereochemistry and fungitoxicity of complexes of p-anisaldehydethiosemicarbazone with Mn(II), Fe(II), Co(II) and Ni(II)

The complexes of p-Anisaldehydethiosemicarbazone (PAT) with Mn(II), Fe(II), Co(II) and Ni(II) have been isolated and characterised on the basis of elemental analyses, molar conductance, magnetic moment and spectral studies. Fungicidal activity has been evaluated against Alternaria (Sp.), Paecilomyces (Sp.) and Pestalotia (Sp.).     

Amidino-complexes of iron(II) and (III)

Lithioamidines {R′N(Li)C(R)NR′, I; R = CH₃, R′ = C₆H₅, p-CH₃,C₆H₄} react with iron(III) chloride

in monoglyme to produce navy-blue, high spin Fe{R′NC(R)NR′}₃ complexes which are extremely air and moisture sensitive. The corresponding reaction when R = R′ = C₆H₅ produces a soluble red complex and an air-stable green complex, whereas when R = H, R′ = C₆H₅ and R = R′ = C₆H₅ and the reaction is started at ca. ?20°, red and green complexes respectively are formed. Though all the complexes are formulated Fe{R′NC(R)NR′}₃, their properties reflect association through bridging amidino-groups. Iron(II) chloride reacts with I(R = CH₃, R′ = p-CH₃C₆H₄) to form two complexes, one crimson and soluble in organic solvents, and one brown and insoluble, which are fomulated [Fe{R′NC(R)NR′}₂]_n. The iron(III) complexes failed to react with, or were decomposed by, a variety of reducing, electrophilic and nucleophilic reagents, though blue Fe{p-CH₃C₆H₄NC(CH₃)N-p-CH₃C₆H₄}₃ reacts readily with nitric oxide to form a purple addition complex from which the N-nitroso-compound p-CH₃C₆H₄NC(CH₃)N(NO)-p-CH₃C₆H₄ was obtained in high yield. Treatment of the corresponding brown iron(II) complex with nitric oxide gave no reaction.     

X-ray crystal structure determinations of two thiourea tin(II) complexes: Diacetatobis(thiourea)tin(II) and ditin(II)tetrabromopenta(thiourea)dihydrate

The crystal structures of diacetatobis(thiourea)tin(II) (I) and ditin(II)tetrabromopenta(thiourea)dihydrate (II) have been determined by X-ray diffraction analysis. The compound I crystallizes in the monoclinic space group Pc with a = 11.932(6), b = 10.937(5), c = 21.919(8) Å, β = 96.5(1), Z = 8. The compound II crystallizes in the orthorhombic space group Pnma with a = 27.83(3), b = 16.13(4), c = 6.11(6) Å, Z = 4. In compound I the tin atom has a square pyramidal environment. It is bonded to two thiourea sulphur atoms and to two carboxylate oxygens. In the compound II there are two tin sites both with trigonal pyramidal coordination. The ¹¹⁹Sn Mössbauer data for thiourea tin(II) compounds are discussed, in terms of their crystal structures.     

Binuclear schiff base complexes of nickel(II) or copper(II) linked by dithiols as a bridging group

Binuclear Schiff base complexes of nickel(II) or copper(II) were synthesized by bridging unsymmetrical Schiff base complexes of nickel(II) and copper(II) with 2,5-dimercapto-1,3,4-thiadiazole or 2-mercaptoethyl ether.Although the magnetic susceptibility and ESR measurements showed that copper(II)copper(II) interaction of the binuclear copper(II) complexes is very weak in the solid state, they catalyzed chemiluminescence of luminol by hydrogen peroxide in DMF solution, suggesting that small amounts of the complexes might be present in the form of the appropriate copper(II)copper(II) distance to activate hydrogen peroxide in solution.     

Solvent effect on the synergic extraction of thulium(III) with acetylacetone and 1,10-phenanthroline

The synergic extraction equilibrium of Tm(III) with acetylacetone (Hacac) and 1,10-phenanthroline (phen) in various organic solvents has been studied. The adduct formation constants, β_s, for Tm(acac)₃^? phen, were determined in heptane, cyclohexane, carbon tetrachloride, benzene and chloroform. The solvent effect on β_s is explained in connection with the activity coefficients of the neutral ligand, the chelate, and the adduct in the organic solvent. The activity coefficients can be calculated from the corresponding solubility parameters on the basis of the regular solution theory, and the solubility parameters of the solutes were estimated from their two-phase partition coefficients. It is demonstrated that β_s in different organic solvents except those having a specific interaction with the solute, such as chloroform, can be calculated by the present approach.     

Five-coordinated metal complexes of bis(2-hydroxy-1-naphthylideneimine-3-propyl)amine and their reactivity towards dioxygen. Part I. An electrochemical investigation on manganese(II), iron(II), cobalt(II), nickel(II) and copper(II) complexes

The electrochemical behaviour in aprotic solvent of the complexes {M[bis-(2-hydroxy-l-naphthylideneimine-3-propyl)amine]}, where M = Mn(II), Co(II), Fe(II), Ni(II) and Cu(II) is reported. The complexes were prepared and characterized by elemental analysis, infrared and visible spectroscopy and magnetic susceptibility measurements. In addition the reactivity towards dioxygen of the Mn(II), Fe(II) and Co(II) derivatives was investigated, mainly by cyclic voltammetry and gas-volumetric uptake measurements. The results indicate that the Co(II) complexes are able to add dioxygen reversibly, while Mn(II) and Fe(II) compounds undergo an irreversible oxygenation process. The pathway of the dioxygenation processes is tentatively interpreted on the basis of the electrochemical responses. The results confirm that the location of the oxidation potential allows one to predict whether a compound is able to react with dioxygen, but it is not sufficient to predict whether the dioxygenation reaction proceeds reversibly.     

Copper(II) complexation by D-glucosamine. Spectroscopic and potentiometric studies

The Cu(II) complex formation equilibria of D- glucosamine were studied in aqueous solution by potentiometric and spectroscopic (ESR, CD, absorption spectra) techniques. All data agree that two major species are formed in the pH region 6–9 involving two D-glucosamine ligand molecules bound to the cupric ion via NH₂(CuL₂) or NH₂ and O^? (CuH_?2L₂). In the latter case deprotonated hydroxyls were found to be very effective coordination sites for Cu(II) giving rise to chelate complexes. On the contrary, no complex formation was observed for the Cu(II) N-acetyl-D-glucosamine system.     

A general approach to the synthesis of neutral and cationic binuclear trithiocarbonato-bridged complexes of palladium(II) or of palladium(II)—platinum(II)

Addition (1:2) of Tl₂CS₃ to solutions of perchloratocomplexes of palladium(II) Pd(OClO₃)(C₆F₅)(PR₃) leads to neutral binuclear derivatives of the type (PR₃)(C₆F₅)Pd(μ-S₂CS)Pd(C₆F₅)(PR₃)₂, whilst the reaction of perchloratocomplexes of palladium(II) or platinum(II) with the neutral Pd(η²-CS₃)(PR₃)₂ affords cationic complexes of the type [L₂Pd(μ-S₂CS)M(C₆F₅)L₂]ClO₄ (M = Pd or Pt). Spectral data (IR and ³¹P, NMR) permit the inequivocal structural characterization of both the neutral and the cationic complexes.     

The syntheses and properties of cobalt(II), nickel(II) and copper(II) complexes with some heterocyclic dithiocarbamates

New cobalt(II), Nickel(II) and copper(II) dithiocarbamato complexes of the type M(Rdtc)₂ (Rdtc = 4-phenylpiperidinedithiocarbamate and N-phenylpiperazinedithiocarbamate) have been prepared and characterized through elemental analyses, conductivity measurements, spectral (electronic and IR) studies, magnetic moment measurements at different temperatures, e.p.r. techniques and thermal analyses (TG and DTG). The dithioligands exhibit bidentate behaviour in all the complexes. The magnetic moments studies suggest that there is no significant interaction between copper ions, and the e.p.r. data provide parameters typical of sulphur coordination in planar CuS₄ chromophores.     

Copper(II) halide complexes of 2-aminobenzophenone. Crystal and molecular structure of bis(2-aminobenzophenone)dichlorocopper(II)

The complexes CuX₂L₂ (X = Cl, Br; L = 2-aminobenzophenone) were prepared and characterized by means of magnetic and spectroscopic measurements. For the Cl compound the crystal structure was also determined. Crystals are triclinic, space group P$\text{1}$, with a = 13.397(3), b = 10.752(2), c = 9.205(2) Å, α = 72.26(1)°, β = 91.58(1)°, γ = 106.86(1)°, and Z = 2. The structure was solved by the heavy-atom method and refined by least-squares calculations to R = 0.034 for 2581 counter data. It consists of discrete CuX₂L₂ monomers showing distorted trigonal bipyramidal coordination geometry about the copper ion. The amino nitrogens are axial ligands, with the equatorial positions occupied by two chlorine atoms and a carbonyl oxygen from one L molecule acting as a bidentate ligand. Infrared and ligand field spectroscopies and magnetic measurements, interpreted on the basis of the known crystal structure, also suggest a similar structure for the related Br compound.     

Tetrahedral 1:1 adducts of guanine with cobalt(II), copper(II) and zinc(II) chlorides

Adducts of the M(guH)Cl₂ type were prepared by refluxing 2:1 molar mixtures of guanine (guH) and MCl₂ (M = Co, Cu, Zn) in ethanol-triethyl orthoformate for 2–3 days. Characterization studies suggest that all three new complexes involve distorted tetrahedral configurations. A linear chainlike polymeric structural type with a single-bridged (-MguH-)_n backbone and two terminal chloro ligands per metal ion (MN₂Cl₂ chromophore) is proposed for these compounds, in view of their poor solubility in organic media, their stoichiometry in conjunction with their tetrahedral symmetry, and the reported crystal structures of 9-methyladenine analogs (M = Co, Zn), which are polymeric with single bridges of the adenine derivative between adjacent metal ions. Bidentate bridging guH coordinates exclusively through ring nitrogens, and is most probably N(7), N(9)-bonded. The possibility of use of exocyclic potential ligand sites of guH (CO oxygen or NH₂ nitrogen) in coordination is ruled out by the infrared evidence [1].     

Stabilities and 1H NMR studies of (diethylenetriamine)Pd(II) and (1,1,4,7,7-pentamethyldien)Pd(II) with nucleosides and related ligands

Plots of stability constant logarithms versus pK_a for dienPd²⁺ binding to a variety of nitrogen heterocycles yield straight lines, all of 0.67 slope. Points for binding at pyridine like purine N1 and pyrimidine N3 nitrogens in nucleosides and 5′-mononucleotides fall on a single straight line. The base line for binding at imidazole like purine N7 nitrogens is 0.8 log units stronger than for N1 binding. N7 binding to purine bases with a 6-oxo group is enhanced by 1.6 log units above the N7 base line. The presence of a 5′-phosphate group enhances N7 binding (but not N1 binding) by 0.5–0.7 log units. Weaker binding occurs with pmdienPd²⁺ and the straight line slopes are 0.79. The N7 base line rises 1.2 log units above the N1 line. Presence of the 6-oxo group enhances pmdien binding by 2.3 units ruling out a significant coordinated dien hydrogen bond to the 6-oxo group. There is no enhancement of pmdienPd²⁺ binding to N7 due to the 5′-phosphate of nucleotides. This result suggests that the 0.5–0.7 log unit enhancement for dienPd²⁺ is due to a hydrogen bond from coordinated dien to the phosphate. Due to the terminal methyl groups, rotation of pyrimidines, benzimidazole, and purines is restricted in pmdienPd²⁺ complexes and two rotamers are evident in proton magnetic resonance spectra. With benzimidazole and purine nucleosides and 5′-nucleotides there is an approximately 2:1 mole ratio of the two rotamers. Nuclear Overhauser effect experiments and chemical shift analysis permit identification of all peaks for pmdien methyl groups and aromatic ring protons.     

Crystal structure of (theophyllinato)methylmercury(II) monohydrate

The title compound belongs to space group P2₁/c, a = 10.884 Å, b = 9.187 Å, c = 14.458 Å, β = 131.02°, Z = 4. The structure was refined on 1355 nonzero reflections to an R factor of 0.059. The crystal contains discrete [CH₃Hg(theophyllinate)] molecules in which the proton initially bound to N7 is replaced by the CH₃Hg⁺ ion. The water molecule forms hydrogen bonds with both carbonyl oxygens, whereas an intermolecular contact of 2.98 Å is established between mercury and N9. The intramolecular Hg?O6 distance of 3.18 Å is consistent with the absence of significant Hg?carbonyl bonding interactions in the present structure.     

Microcalorimetric evaluation of the biological activity of polyene complexes with divalent metal ions: Mg(II), Ca(II), Ni(II), Cu(II) and Zn(II)

Polyene complexes with Mg(II), Ca(II), Ni(II), Cu(II) and Zn(II) have been prepared and evaluated for biological activity in a flow microcalorimetric study. The bioactivities are all lower per g of complex than is the bioactivity of the patent polyene, nystatin. However extrapolation of the linear bioassay data suggests that because of enhanced solubilities the metal ion complexes may be able to yield higher overall bioactivity than can nystatin alone.     

Biologically important coordination compounds of 4-acetyl-2-(acetylamino)-5-dimethyl-δ2-1,3,4-thiadiazole with manganese(II), iron(II), cobalt(II) and nickel(II)

The complexes of 4-Acetyl-2-(acetylamino)-5- dimethyl-δ²-1,3,4-thiadiazole (AAT) with Mn(II), Fe(II), Co(Il) and Ni(II) have been prepared and characterized on the basis of elemental analyses, molar conductance, magnetic moments, electronic and infrared spectral studies. The most probable structures of the complexes have been proposed on the basis of their physicochemical properties. The fungitoxicity of AAT and its complexes has been evaluated on pathogenic fungi.