Identification and validation of quantitative trait loci controlling seed isoflavone content across multiple environments and backgrounds in soybean

Soybean is important throughout the world not only due to the high seed protein and oil but also owing to the seed isoflavone. To improve the isoflavone concentration in seeds, detecting and mining the stable and reliable quantitative trait loci (QTLs) and related genes in multiple environments and genetic backgrounds become more and more important. In view of this, a F_6:7 recombinant inbred line (RIL) population of 345 lines derived from a cross between Zheng 92116 and Liaodou14 (ZL) was genotyped using 1739 polymorphic SNP and 127 SSR markers in this study and was phenotyped for individual and total seed isoflavone in four environments over 2 years. In total, 48 additive QTLs, which explained 3.00–29.83% of seed isoflavone variation, were identified. Of them, eight QTLs (qDA1_1, qGA1_1, qTIA1_1, qDA1_2, qGA1_2, qTIA1_2, qDA1_3, qTIA1_3) with phenotypic variation explained (PVE) ranging from 14.09 to 28.59% for daidzin, genistin, and total isoflavone were located on the same region of linkage group (LG) A1. These QTLs were further verified in another RIL population derived from Zheng 92116 × Qihuang 30 (ZQ). Meanwhile, the other four overlapping QTLs on linkage group B1, which were associated with glycitin content (qGLB1_1, qGLB1_2, qGLB1_3, qGLB1_4) and explained 16.52 to 29.83% of phenotypic variation, were also verified using the ZQ population. Moreover, the individuals with different genotypes at the common flanking SNP markers for these QTLs on LGs A1 and B1 in the two mapping populations showed significant different isoflavone content, which further validate the QTL mapping results. And also, some candidate genes might participate in the isoflavone biosynthesis processes were found in these stable QTL regions. Thus, the novel and stable QTLs identified and verified in this study could be applied in marker-assisted selection breeding or map-based candidate genes cloning in soybean seed isoflavone genetic improvement in future.     

Chromosomes A07 and A05 associated with stable and major QTLs for pod weight and size in cultivated peanut (<Emphasis Type="Italic">Arachis hypogaea</Emphasis> L.)

Key message

Co-localized intervals and candidate genes were identified for major and stable QTLs controlling pod weight and size on chromosomes A07 and A05 in an RIL population across four environments.

Abstract

Cultivated peanut (Arachis hypogaea L.) is an important legume crops grown in > 100 countries. Hundred-pod weight (HPW) is an important yield trait in peanut, but its underlying genetic mechanism was not well studied. In this study, a mapping population (Xuhua 13 × Zhonghua 6) with 187 recombinant inbred lines (RILs) was developed to map quantitative trait loci (QTLs) for HPW together with pod length (PL) and pod width (PW) by both unconditional and conditional QTL analyses. A genetic map covering 1756.48 cM was constructed with 817 markers. Additive effects, epistatic interactions, and genotype-by-environment interactions were analyzed using the phenotyping data generated across four environments. Twelve additive QTLs were identified on chromosomes A05, A07, and A08 by unconditional analysis, and five of them (qPLA07, qPLA05.1, qPWA07, qHPWA07.1, and qHPWA05.2) showed major and stable expressions in all environments. Conditional QTL mapping found that PL had stronger influences on HPW than PW. Notably, qHPWA07.1, qPLA07, and qPWA07 that explained 17.93–43.63% of the phenotypic variations of the three traits were co-localized in a 5 cM interval (1.48 Mb in physical map) on chromosome A07 with 147 candidate genes related to catalytic activity and metabolic process. In addition, qHPWA05.2 and qPLA05.1 were co-localized with minor QTL qPWA05.2 to a 1.3 cM genetic interval (280 kb in physical map) on chromosome A05 with 12 candidate genes. This study provides a comprehensive characterization of the genetic components controlling pod weight and size as well as candidate QTLs and genes for improving pod yield in future peanut breeding.

     

Construction of the First High-Density Genetic Linkage Map and Analysis of Quantitative Trait Loci for Growth-Related Traits in <Emphasis Type="Italic">Sinonovacula constricta</Emphasis>

The razor clam (Sinonovacula constricta) is an important aquaculture species, for which a high-density genetic linkage map would play an important role in marker-assisted selection (MAS). In this study, we constructed a high-density genetic map and detected quantitative trait loci (QTLs) for Sinonovacula constricta with an F₁ cross population by using the specific locus amplified fragment sequencing (SLAF-seq) method. A total of 315,553 SLAF markers out of 467.71 Mreads were developed. The final linkage map was composed of 7516 SLAFs (156.60-fold in the parents and 20.80-fold in each F₁ population on average). The total distance of the linkage map was 2383.85 cM, covering 19 linkage groups with an average inter-marker distance of 0.32 cM. The proportion of gaps less than 5.0 cM was on average 96.90%. A total of 16 suggestive QTLs for five growth-related traits (five QTLs for shell height, six QTLs for shell length, three QTLs for shell width, one QTL for total body weight, and one QTL for soft body weight) were identified. These QTLs were distributed on five linkage groups, and the regions showed overlapping on LG9 and LG13. In conclusion, the high-density genetic map and QTLs for S. constricta provide a valuable genetic resource and a basis for MAS.     

Genetic analysis of shoot fresh weight in a cross of wild (<Emphasis Type="Italic">G. soja</Emphasis>) and cultivated (<Emphasis Type="Italic">G. max</Emphasis>) soybean

Shoot fresh weight (SFW) is one of the parameters, used to estimate the total plant biomass yield in soybean. In the present study, a total of 188 F_5:8 recombinant inbred lines (RIL) derived from an interspecific cross of PI 483463 (Glycine soja) and Hutcheson (Glycine max) were investigated for SFW variation in the field for three consecutive years. The parental lines and RILs were phenotyped in the field at the R6 stage by measuring total biomass in kg/plot to identify the QTLs for SFW. Three QTLs qSFW6_1, qSFW15_1, and qSFW19_1 influencing SFW were identified on chromosome 6, 15, and 19, respectively. The QTL qSFW19_1 flanked between the markers BARC-044913-08839 and BARC-029975-06765 was the stable QTL expressed in all the three environments. The phenotypic variation explained by the QTLs across all environments ranged from 6.56 to 21.32 %. The additive effects indicated contribution of alleles from both the parents and additive × environment interaction effects affected the expression of SFW QTL. Screening of the RIL population with additional SSRs from the qSFW19_1 region delimited the QTL between the markers SSR19-1329 and BARC-29975-06765. QTL mapping using bin map detected two QTLs, qSFW19_1A and qSFW19_1B. The QTL qSFW19_1A mapped close to the Dt1 gene locus, which affects stem termination, plant height, and floral initiation in soybean. Potential candidate genes for SFW were pinpointed, and sequence variations within their sequences were detected using high-quality whole-genome resequencing data. The findings in this study could be useful for understanding genetic basis of SFW in soybean.     

Construction of a sequence-based bin map and mapping of QTLs for downy mildew resistance at four developmental stages in Chinese cabbage (<Emphasis Type="Italic">Brassica rapa</Emphasis> L. ssp. <Emphasis Type="Italic">pekinensis</Emphasis>)

Specific-locus amplified fragment sequencing is a high-resolution method for genetic mapping, genotyping, and single nucleotide polymorphism (SNP) marker discovery. Previously, a major QTL for downy mildew resistance, BraDM, was mapped to linkage group A08 in a doubled-haploid population derived from Chinese cabbage lines 91–112 and T12–19. The aim of the present study was to improve the linkage map and identify the genetic factors involved in downy mildew resistance. We detected 53,692 high quality SLAFs, of which 7230 were polymorphic, and 3482 of the polymorphic markers were used in genetic map construction. The final map included 1064 bins on ten linkage groups and was 858.98 cM in length, with an average inter-locus distance of 0.81 cM. We identified six QTLs that are involved in downy mildew resistance. The four major QTLs, sBrDM8, yBrDM8, rBrDM8, and hBrDM8, for resistance at the seedling, young plant, rosette, and heading stages were mapped to A08, and are identical to BraDM. The two minor resistance QTLs, rBrDM6 (A06) and hBrDM4 (A04), were active at the rosette and heading stages. The major QTL sBrDM8 defined a physical interval of ~228 Kb on A08, and a serine/threonine kinase family gene, Bra016457, was identified as the possible candidate gene. We report here the first high-density bin map for Chinese cabbage, which will facilitate mapping QTLs for economically important traits and SNP marker development. Our results also expand knowledge of downy mildew resistance in Chinese cabbage and provide three SNP markers (A08-709, A08-028, and A08-018) that we showed to be effective when used in MAS to breed for downy mildew resistance in B. rapa.     

A SNP-based genetic linkage map of <Emphasis Type="Italic">Capsicum baccatum</Emphasis> and its comparison to the <Emphasis Type="Italic">Capsicum annuum</Emphasis> reference physical map

Capsicum baccatum L., one of five domesticated species of Capsicum, is a valuable species in chili pepper breeding. In particular, it is a source of disease resistance against anthracnose and powdery mildew. Genetic maps and molecular markers are important to improve the efficiency of crop breeding programs. Recently, using genetic maps several researchers have identified quantitative trait loci (QTLs) for important horticultural traits and have cloned genes of interest. In this study, we constructed a genetic map of C. baccatum in an intraspecific population from a cross between ‘Golden-aji’ and ‘PI594137.’ A total of 395 high-resolution melting markers were developed based on single-nucleotide polymorphisms identified by comparing genome sequences generated through next-generation resequencing of the parents, ‘Golden-aji’ and ‘PI594137.’ The genetic linkage map contained 12 linkage groups, covered a total distance of 1056.2 cM, and had an average distance of 2.67 cM between markers. In addition, the final map was compared to the reference physical map of C. annuum ‘CM334.’ Interestingly, two major reciprocal translocations between chromosomes 3 and 5 and between chromosomes 3 and 9 were found, suggesting that these translocations might act as a genetic barrier between C. annuum and C. baccatum. Translocations between chromosomes 1 and 8 were also observed, as were previously reported in C. chinense, C. frutescens, and wild C. annuum. The synteny of other chromosomes was maintained, on the whole, except for several small inversions. The information on this genetic map will be helpful to analyze QTLs for important traits such as anthracnose resistance in C. baccatum and to study the causes of genetic barriers between C. annuum and C. baccatum.     

Fine mapping a major QTL <Emphasis Type="Italic">qFCC7</Emphasis><Subscript><Emphasis Type="Italic">L</Emphasis></Subscript> for chlorophyll content in rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) cv. PA64s

Chlorophyll (Chl) content is an important agronomic trait directly affecting the photosynthetic rate. Using a high-density genetic map of 132 recombinant inbred lines (RILs) derived from the cross between 93-11 and PA64s, we detected the quantitative trait loci (QTLs) for Chl content of the top three leaves under two nitrogen (N) conditions at two developmental stages. A total of 32 main-effect QTLs located on chromosomes 1, 4, 5, 6, 7, 8, and 12 were identified, and these QTLs individually accounted for 6.0–20.8?% of the total phenotypic variation. A major QTL qFCC7 _L affecting the Chl content under low N condition was identified, and its positive allele came from PA64s. This QTL might be associated with the ability to tolerate low-N stress in rice. The chromosomal segment substitution line (CSSL) with the corresponding segment from PA64s had a higher SPAD value and photosynthetic rate than 93-11 and showed a lower specific leaf area (SLA). We performed a fine-mapping using a BC₄F₂ population via marker-assisted backcross and finally mapped this QTL to a 124.5 kb interval on the long arm of chromosome 7. Candidate gene analysis showed that there were sequence variations and expression differences in the predicted candidate gene between the two parents. These results suggest that the QTL qFCC7 _L may be useful for breeding the rice varieties with higher photosynthetic rate and grain yield.     

Development of F1 hybrid population and the high-density linkage map for European aspen (<Emphasis Type="Italic">Populus tremula</Emphasis> L.) using RADseq technology

Background

Restriction-site associated DNA sequencing (RADseq) technology was recently employed to identify a large number of single nucleotide polymorphisms (SNP) for linkage mapping of a North American and Eastern Asian Populus species. However, there is also the need for high-density genetic linkage maps for the European aspen (P. tremula) as a tool for further mapping of quantitative trait loci (QTLs) and marker-assisted selection of the Populus species native to Europe.

Results

We established a hybrid F1 population from the cross of two aspen parental genotypes diverged in their phenological and morphological traits. We performed RADseq of 122 F1 progenies and two parents yielding 15,732 high-quality SNPs that were successfully identified using the reference genome of P. trichocarpa. 2055 SNPs were employed for the construction of maternal and paternal linkage maps. The maternal linkage map was assembled with 1000 SNPs, containing 19 linkage groups and spanning 3054.9 cM of the genome, with an average distance of 3.05 cM between adjacent markers. The paternal map consisted of 1055 SNPs and the same number of linkage groups with a total length of 3090.56 cM and average interval distance of 2.93 cM. The linkage maps were employed for QTL mapping of one-year-old seedlings height variation. The most significant QTL (LOD = 5.73) was localized to LG5 (96.94 cM) of the male linkage map, explaining 18% of the phenotypic variation.

Conclusions

The set of 15,732 SNPs polymorphic in aspen and high-density genetic linkage maps constructed for the P. tremula intra-specific cross will provide a valuable source for QTL mapping and identification of candidate genes facilitating marker-assisted selection in European aspen.

     

QTL mapping of mandarin (<Emphasis Type="Italic">Citrus reticulata</Emphasis>) fruit characters using high-throughput SNP markers

Seedlessness, flavor, and color are top priorities for mandarin (Citrus reticulata Blanco) cultivar improvement. Given long juvenility, large tree size, and high breeding cost, marker-assisted selection (MAS) may be an expeditious and economical approach to these challenges. The objectives of this study were to construct high-density mandarin genetic maps and to identify single nucleotide polymorphism (SNP) markers associated with fruit quality traits. Two parental genetic maps were constructed from an F₁ population derived from ‘Fortune’ × ‘Murcott’, two mandarin cultivars with distinct fruit characters, using a 1536-SNP Illumina GoldenGate assay. The map for ‘Fortune’ (FOR) consisted of 189 SNPs spanning 681.07 cM and for ‘Murcott’ (MUR) consisted of 106 SNPs spanning 395.25 cM. Alignment of the SNP sequences to the Clementine (Citrus clementina) genome showed highly conserved synteny between the genetic maps and the genome. A total of 48 fruit quality quantitative trait loci (QTLs) were identified, and ten of them stable over two or more samplings were considered as major QTLs. A cluster of QTLs for flavedo color space values L, a, b, and a/b and juice color space values a and a/b were detected in a single genomic region on linkage group 4. Two carotenoid biosynthetic pathway genes, pds1 and ccd4, were found within this QTL interval. Several SNPs were potentially useful in MAS for these fruit characteristics. QTLs were validated in 13 citrus selections, which may be useful in further validation and tentative MAS in mandarin fruit quality improvement.     

Locating QTLs controlling overwintering seedling rate in perennial glutinous rice 89-1 (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

A new cold tolerant germplasm resource named glutinous rice 89-1 (Gr89-1, Oryza sativa L.) can overwinter using axillary buds, with these buds being ratooned the following year. The overwintering seedling rate (OSR) is an important factor for evaluating cold tolerance. Many quantitative trait loci (QTLs) controlling cold tolerance at different growth stages in rice have been identified, with some of these QTLs being successfully cloned. However, no QTLs conferring to the OSR trait have been located in the perennial O. sativa L. To identify QTLs associated with OSR and to evaluate cold tolerance. 286 F₁₂ recombinant inbred lines (RILs) derived from a cross between the cold tolerant variety Gr89-1 and cold sensitive variety Shuhui527 (SH527) were used. A total of 198 polymorphic simple sequence repeat (SSR) markers that were distributed uniformly on 12 chromosomes were used to construct the linkage map. The gene ontology (GO) annotation of the major QTL was performed through the rice genome annotation project system. Three main-effect QTLs (qOSR2, qOSR3, and qOSR8) were detected and mapped on chromosomes 2, 3, and 8, respectively. These QTLs were located in the interval of RM14208 (35,160,202 base pairs (bp))–RM208 (35,520,147 bp), RM218 (8,375,236 bp)–RM232 (9,755,778 bp), and RM5891 (24,626,930 bp)–RM23608 (25,355,519 bp), and explained 19.6%, 9.3%, and 11.8% of the phenotypic variations, respectively. The qOSR2 QTL displayed the largest effect, with a logarithm of odds score (LOD) of 5.5. A total of 47 candidate genes on the qOSR2 locus were associated with 219 GO terms. Among these candidate genes, 11 were related to cell membrane, 7 were associated with cold stress, and 3 were involved in response to stress and biotic stimulus. OsPIP1;3 was the only one candidate gene related to stress, biotic stimulus, cold stress, and encoding a cell membrane protein. After QTL mapping, a total of three main-effect QTLs—qOSR2, qOSR3, and qOSR8—were detected on chromosomes 2, 3, and 8, respectively. Among these, qOSR2 explained the highest phenotypic variance. All the QTLs elite traits come from the cold resistance parent Gr89-1. OsPIP1;3 might be a candidate gene of qOSR2.     

Salt stress induced soybean <Emphasis Type="Italic">GmIFS1</Emphasis> expression and isoflavone accumulation and salt tolerance in transgenic soybean cotyledon hairy roots and tobacco

Effects of isoflavones on plant salt tolerance were investigated in soybean (Glycine max L. Merr. cultivar N23674) and tobacco (Nicotiana tabacum L.). Leaf area, fresh weight, net photosynthetic rate (Pn), and transpiration rate (Tr) of soybean N23674 plants treated with 80 mM NaCl were significantly reduced, while a gene (GmIFS1) encoding for 2-hydroxyisoflavone synthase was highly induced, and isoflavone contents significantly increased in leaves and seeds. To test the impact of isoflavones to salt tolerance, transgenic soybean cotyledon hairy roots expressing GmIFS1 (hrGmIFS1) were produced. Salt stress slightly increased isoflavone content in hairy roots of the transgenic control harboring the empty vector but substantially reduced the maximum root length, root fresh weight, and relative water content (RWC). The isoflavone content in hrGmIFS1 roots, however, was significantly higher, and the above-mentioned root growth parameters decreased much less. The GmIFS1 gene was also transformed into tobacco plants; plant height and leaf fresh weight of transgenic GmIFS1 tobacco plants were much greater than control plants after being treated with 85 mM NaCl. Leaf antioxidant capacity of transgenic tobacco was significantly higher than the control plants. Our results suggest that salt stress-induced GmIFS1 expression increased isoflavone accumulation in soybean and improved salt tolerance in transgenic soybean hairy roots and tobacco plants.     

Development of SSR markers and identification of major quantitative trait loci controlling shelling percentage in cultivated peanut (<Emphasis Type="Italic">Arachis hypogaea</Emphasis> L.)

Key message

A total of 204,439 SSR markers were developed in diploid genomes, and 25 QTLs for shelling percentage were identified in a RIL population across 4 years including five consistent QTLs.

Abstract

Cultivated peanut (Arachis hypogaea L.) is an important grain legume providing edible oil and protein for human nutrition. Genome sequences of its diploid ancestors, Arachis duranensis and A. ipaensis, were reported, but their SSRs have not been well exploited and utilized hitherto. Shelling percentage is an important economic trait and its improvement has been one of the major objectives in peanut breeding programs. In this study, the genome sequences of A. duranensis and A. ipaensis were used to develop SSR markers, and a mapping population (Yuanza 9102 × Xuzhou 68-4) with 195 recombinant inbred lines was used to map QTLs controlling shelling percentage. The numbers of newly developed SSR markers were 84,383 and 120,056 in the A. duranensis and A. ipaensis genomes, respectively. Genotyping of the mapping population was conducted with both newly developed and previously reported markers. QTL analysis using the phenotyping data generated in Wuhan across four consecutive years and genotyping data of 830 mapped loci identified 25 QTLs with 4.46–17.01% of phenotypic variance explained in the four environments. Meta-analysis revealed five consistent QTLs that could be detected in at least two environments. Notably, the consistent QTL cqSPA09 was detected in all four environments and explained 10.47–17.01% of the phenotypic variance. The segregation in the progeny of a residual heterozygous line confirmed that the cpSPA09 locus had additive effect in increasing shelling percentage. These consistent and major QTL regions provide opportunity not only for further gene discovery, but also for the development of functional markers for breeding.

     

A high-density linkage map with 2560 markers and its application for the localization of the male-sterile genes <Emphasis Type="Italic">ms3</Emphasis> and <Emphasis Type="Italic">ms4</Emphasis> in <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> D. Don

Cryptomeria japonica pollinosis is one of the most serious allergic diseases in Japan; this is a social problem because C. japonica is the most important Japanese forestry species. In order to reduce the amount of pollen dispersed, breeding programs using trees with male-sterile genes have been implemented. High-density linkage maps with stable ordering of markers facilitate the localization of male-sterile genes and the construction of partial linkage maps around them in order to develop markers for use in marker-assisted selection. In this study, a high-density linkage map for C. japonica with 2560 markers was constructed. The observed map length was 1266.2 cM and the mean distance between adjacent markers was 0.49 cM. Using information from this high-density map, we newly located two male-sterile genes (ms3 and ms4) on the first and fourth linkage groups, respectively, and constructed partial linkage maps around these loci. We also constructed new partial linkage maps around the ms1 and ms2 loci using additional SNP markers. The closest markers to the ms1, ms2, ms3, and ms4 male-sterile loci were estSNP04188 (1.8 cM), estSNP00695 (7.0 cM), gSNP05415 (3.1 cM), and estSNP01408 (7.0 cM) respectively. These results allowed us to develop SNP markers tightly linked to the male sterile genes for use in MAS; this will accelerate the future isolation of these genes by map-based cloning approaches.     

Genetic mapping of yield traits using RIL population derived from Fuchuan Dahuasheng and ICG6375 of peanut (<Emphasis Type="Italic">Arachis hypogaea</Emphasis> L.)

The genetic architecture determinants of yield traits in peanut (Arachis hypogaea L.) are poorly understood. In the present study, an effort was made to map quantitative trait loci (QTLs) for yield traits using recombinant inbred lines (RIL). A genetic linkage map was constructed containing 609 loci, covering a total of 1557.48 cM with an average distance of 2.56 cM between adjacent markers. The present map exhibited good collinearity with the physical map of diploid species of Arachis. Ninety-two repeatable QTLs were identified for 11 traits including height of main stem, total branching number, and nine pod- and seed-related traits. Of the 92 QTLs, 15 QTLs were expressed across three environments and 65 QTLs were newly identified. Twelve QTLs for the height of main stem and the pod- and seed-related traits explaining more than 10 % of phenotypic variation showed a great potential for marker-assisted selection in improving these traits. 相似文献   

High-density linkage maps for <Emphasis Type="Italic">Citrus sunki</Emphasis> and <Emphasis Type="Italic">Poncirus trifoliata</Emphasis> using DArTseq markers

The construction of a high-resolution genetic map of citrus would be of great value to breeders and to associate genomic regions with characteristics of agronomic interest. Here, we describe a novel high-resolution map of citrus using a population derived from a controlled cross between Citrus sunki (female parent) and Poncirus trifoliata (male parent). The genetic linkage maps were constructed using DArTseq markers and a pseudo-testcross strategy; only markers showing the expected segregation ratio were considered. To investigate synteny, all markers from both linkage maps were aligned with the genome of Citrus sinensis. The C. sunki map has a total of 2778 molecular markers and a size of 2446.6 cM, distributed across ten linkage groups. The map of P. trifoliata was built with 3084 markers distributed in a total of nine linkage groups, with a total size of 2411.6 cM. These maps are the most saturated linkage maps available for C. sunki and P. trifoliata and have high genomic coverage. We also demonstrated that the maps reported here are closely related to the reference genome of C. sinensis.     

Genetic mapping of ovary colour and quantitative trait loci for carotenoid content in the fruit of <Emphasis Type="Italic">Cucurbita maxima</Emphasis> Duchesne

The high content of carotenoids, sugars, dry matter, vitamins and minerals makes the fruit of winter squash (Cucurbita maxima Duchesne) a valuable fresh-market vegetable and an interesting material for the food industry. Due to their nutritional value, long shelf-life and health protective properties, winter squash fruits have gained increased interest from researchers in recent years. Despite these advantages, the genetic and genomic resources available for C. maxima are still limited. The aim of this study was to use the genetic mapping approach to map the ovary colour locus and to identify the quantitative trait loci (QTLs) for high carotenoid content and flesh colour. An F₆ recombinant inbred line (RIL) mapping population was developed and used for evaluations of ovary colour, carotenoid content and fruit flesh colour. SSR markers and DArTseq genotyping-by-sequencing were used to construct an advanced genetic map that consisted of 1824 molecular markers distributed across linkage groups corresponding to 20 chromosomes of C. maxima. Total map length was 2208 cM and the average distance between markers was 1.21 cM. The locus affecting ovary colour was mapped at the end of chromosome 14. The identified QTLs for carotenoid content in the fruit and fruit flesh colour shared locations on chromosomes 2, 4 and 14. QTLs on chromosomes 2 and 4 were the most meaningful. A correlation was clearly confirmed between fruit flesh colour as described by the chroma value and carotenoid content in the fruit. A high-density genetic map of C. maxima with mapped loci for important fruit quality traits is a valuable resource for winter squash improvement programmes.     

Identification of candidate genes of QTLs for seed weight in <Emphasis Type="Italic">Brassica napus</Emphasis> through comparative mapping among <Emphasis Type="Italic">Arabidopsis</Emphasis> and <Emphasis Type="Italic">Brassica</Emphasis>species

Background

Map-based cloning of quantitative trait loci (QTLs) in polyploidy crop species remains a challenge due to the complexity of their genome structures. QTLs for seed weight in B. napus have been identified, but information on candidate genes for identified QTLs of this important trait is still rare.

Results

In this study, a whole genome genetic linkage map for B. napus was constructed using simple sequence repeat (SSR) markers that covered a genetic distance of 2,126.4 cM with an average distance of 5.36 cM between markers. A procedure was developed to establish colinearity of SSR loci on B. napus with its two progenitor diploid species B. rapa and B. oleracea through extensive bioinformatics analysis. With the aid of B. rapa and B. oleracea genome sequences, the 421 homologous colinear loci deduced from the SSR loci of B. napus were shown to correspond to 398 homologous loci in Arabidopsis thaliana. Through comparative mapping of Arabidopsis and the three Brassica species, 227 homologous genes for seed size/weight were mapped on the B. napus genetic map, establishing the genetic bases for the important agronomic trait in this amphidiploid species. Furthermore, 12 candidate genes underlying 8 QTLs for seed weight were identified, and a gene-specific marker for BnAP2 was developed through molecular cloning using the seed weight/size gene distribution map in B. napus.

Conclusions

Our study showed that it is feasible to identify candidate genes of QTLs using a SSR-based B. napus genetic map through comparative mapping among Arabidopsis and B. napus and its two progenitor species B. rapa and B. oleracea. Identification of candidate genes for seed weight in amphidiploid B. napus will accelerate the process of isolating the mapped QTLs for this important trait, and this approach may be useful for QTL identification of other traits of agronomic significance.

     

Genetic diversity and population structure of a drought-tolerant species of <Emphasis Type="Italic">Eucalyptus</Emphasis>, using microsatellite markers

Given the impact of climate change on the availability of water resources, it becomes necessary the use of plant species well suited to planting on dryland sites. Eucalyptus cladocalyx, a native tree of South Australia, is capable of growing under relatively dry environments and saline soils. Two hundred twenty simple sequence repeat (microsatellites) markers, from a consensus linkage map of Eucalyptus, were selected to examine genetic diversity and population structure in a collection of E. cladocalyx introduced to southern Atacama Desert, Chile. A total of 130 microsatellites were successfully amplified, some of which are associated with quantitative traits of interest in Eucalyptus. Genetic analysis revealed a total of 457 alleles, ranging from 2 to 8 alleles per locus. A moderate level of genetic diversity (He = 0.492) and differentiation (FST = 0.086) was found among the populations. Mount Remarkable and Marble Range showed the highest and lowest level of genetic diversity, respectively. The Bayesian clustering analysis revealed three homogeneous genetic groups confirming that the individuals of E. cladocalyx from natural forest are highly and significantly structured. These results provide a novel information for the development of breeding strategies in E. cladocalyx by using marker-assisted selection in regions with low rainfall patterns.     

Quantitative trait locus mapping under irrigated and drought treatments based on a novel genetic linkage map in mungbean (<Emphasis Type="Italic">Vigna radiata</Emphasis> L.)

Key message

A novel genetic linkage map was constructed using SSR markers and stable QTLs were identified for six drought tolerance related-traits using single-environment analysis under irrigation and drought treatments.

Abstract

Mungbean (Vigna radiata L.) is one of the most important leguminous food crops. However, mungbean production is seriously constrained by drought. Isolation of drought-responsive genetic elements and marker-assisted selection breeding will benefit from the detection of quantitative trait locus (QTLs) for traits related to drought tolerance. In this study, we developed a full-coverage genetic linkage map based on simple sequence repeat (SSR) markers using a recombinant inbred line (RIL) population derived from an intra-specific cross between two drought-resistant varieties. This novel map was anchored with 313 markers. The total map length was 1010.18 cM across 11 linkage groups, covering the entire genome of mungbean with a saturation of one marker every 3.23 cM. We subsequently detected 58 QTLs for plant height (PH), maximum leaf area (MLA), biomass (BM), relative water content, days to first flowering, and seed yield (Yield) and 5 for the drought tolerance index of 3 traits in irrigated and drought environments at 2 locations. Thirty-eight of these QTLs were consistently detected two or more times at similar linkage positions. Notably, qPH5A and qMLA2A were consistently identified in marker intervals from GMES5773 to MUS128 in LG05 and from Mchr11-34 to the HAAS_VR_1812 region in LG02 in four environments, contributing 6.40–20.06% and 6.97–7.94% of the observed phenotypic variation, respectively. None of these QTLs shared loci with previously identified drought-related loci from mungbean. The results of these analyses might facilitate the isolation of drought-related genes and help to clarify the mechanism of drought tolerance in mungbean.

     

Characterization of an IAA-glucose hydrolase gene <Emphasis Type="Italic">TaTGW6</Emphasis> associated with grain weight in common wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

In rice, the TGW6 gene determines grain weight and encodes a protein with indole-3-acetic acid (IAA)-glucose hydrolase activity. Its homolog in wheat, TaTGW6, is considered as a candidate gene related to grain development. To amplify this gene, we designed primers based on a homologous conserved domain of the rice TGW6 gene. Sequence analysis indicated that TaTGW6 comprises only one exon, with 1656 bp in total and an open reading frame of 1035 bp. Three alleles at TaTGW6 locus detected by the primer pair TG23 were designated as TaTGW6-a, TaTGW6-b and TaTGW6-c, respectively. Compared with TaTGW6-a, TaTGW6-b had a 6-bp InDel at the position 170 downstream of initiation codon, and TaTGW6-c was a null mutant. Both TaTGW6-b and TaTGW6-c could significantly increase grain size and weight other than TaTGW6-a; however, the former two alleles showed a low frequency distribution in modern varieties. TaTGW6 was located on chromosome 4AL using a recombinant inbred line population and a set of Chinese Spring nullisomic-tetrasomic lines. It was linked to the SSR locus Xbarc1047 with a genetic distance of 6.62 cM and explained 15.8–21.0 % of phenotypic variation of grain weight in four environments. Association analysis using a natural population and Chinese wheat mini-core collections additionally validated the relationship of TaTGW6 with grain weight; the gene could explain 7.7–12.4 % of phenotypic variation in three environments. Quantitative real-time PCR revealed that TaTGW6-b showed relatively lower expression than TaTGW6-a in immature grain at 20 and 30 days post-anthesis and in mature grain. The low expression of TaTGW6 generally associated with low IAA content, but with high grain weight. The novel functional marker, designated as TG23, can be used for marker-assisted selection to improve grain weight in wheat and also provides insights into the regulatory mechanism underlying grain weight.