Initiation of lagging-strand synthesis for pBR322 plasmid DNA replication in vitro is dependent on primosomal protein i encoded by dnaT

The role of the primosome assembly and protein n' recognition site in replication of pBR322 plasmid was examined. The following evidence indicates that the primosome is involved in lagging-strand synthesis of pBR322 plasmid replication in vitro. Early replicative intermediates with newly synthesized leading strand, approximately 1 kilobase pair long, immediately downstream of the replication origin accumulate in products synthesized in extracts from a dnaT strain that lacks primosomal protein i or in wild-type extracts supplemented with anti-protein i antibody. These intermediates are converted efficiently into full-length DNA by addition of purified protein i. Consistent with the previously proposed role of the primosome (Arai, K. and Kornberg, A. (1981) Proc. Natl. Acad. Sci. U. S. A. 78, 69-73), an n' site on the lagging strand, but not on the leading strand, is required for efficient replication of the plasmid in vitro. Plasmids lacking an n' site on the lagging strand replicate only to a limited extent in vitro and early replicative intermediates carrying nascent leading strands are accumulated, although a portion of the intermediates complete replication to yield full-length DNA. The latter reaction is completely inhibited by addition of anti-protein i antibody. Insertion of the n' site of phage phi X174 into pBR322 plasmids lacking lagging-strand n' sites restores the replicative ability of the mutant plasmid comparable to that of the wild-type plasmid. These results indicate that protein i is essential for lagging-strand synthesis of pBR322 plasmid in vitro and that it may play an important role in the priming events as a part of either an n' site-dependent primosome or an n' site-independent, as yet unidentified, priming complex.     

Rifampicin-induced replication of the plasmid pBR322 in Escherichia coli strains carrying dnaA mutations

The replication pattern of the plasmid pBR322 was examined in the dnaA mutants of Escherichia coli. The rate of pBR322 DNA synthesis is markedly decreased after dnaA cells are shifted to the restrictive temperature of 42 degrees C. However, addition of rifampicin (RIF) to cultures of dnaA strains incubated at 42 degrees C after a lag of 90 min results in a burst of pBR322 synthesis. This RIF-induced pBR322 replication remains dependent on DNA polymerase I activity. Efficient plasmid pBR322 replication is observed at 42 degrees C in the double mutant dnaA46cos bearing an intragenic suppressor of dnaA46. Though replication of pBR322 in dnaA46cos growing at 42 degrees C is initially sensitive to RIF plasmid synthesis is restored after 90 min incubation in the presence of the drug. RIF-induced replication of the plasmid pBR327, lacking the rriB site implicated in RIF-resistant synthesis of the L strand of ColE1-like plasmids (Nomura and Ray 1981; Zipursky and Marians 1981), was observed also in dnaA46 at 42 degrees C.     

Transposon 10 promoted deletions and inversions in the transfer genes of R100-1

Summary The replication of the ColE1 plasmid was studied in extracts from E. coli dnaG mutants. It was found that the synthesis of the complementary strands of ColE1 DNA can be carried out in these extracts in two consecutive steps: (1) synthesis of the leading L strand independent of the dnaG function, and (2) synthesis of the lagging H strand depending upon addition of wild-type dnaG protein. In contrast to L strand synthesis, the latter reaction is insensitive to rifampicin and novobiocin. Both synthetic pathways are however blocked by antiserum directed against dnaB protein. This indicates an additional role of the dnaB protein in duplex DNA replication besides assisting the dnaG protein in the priming of lagging strand synthesis. The T7 gene-4 protein acting in conjunction with T7 DNA polymerase can substitute for both the function of the dnaB and dnaG protein. It is concluded that plasmid replication proceeds by a semi-discontinuous mechanism.     

Dissecting the functional role of PriA protein-catalysed primosome assembly in Escherichia coli DNA replication

The multi-functional PriA protein of Escherichia coli (formerly replication factor Y or protein n') serves to guide the ordered assembly of the primosome, a mobile multiprotein replication priming/helicase complex. Primosome assembly is essential for bacteriophage OX174 complementary DNA strand synthesis and ColE1-type plasmid replication reconstituted in vitro with purified proteins. The biochemical activities of the primosome suggest that it can fulfill the primase/helicase requirement on the lagging-strand DNA template during cellular DNA replication. However, reconstruction in vitro of DNA replication of small plasmids containing the E. coli origin of DNA replication (oriC) does not require the complete complement of primosomal proteins. Thus, the extent to which PriA-catalysed primosome assembly participates in chromosomal replication has remained unclear. The recent isolation of the genes encoding PriA, PriB (protein n), PriC (protein n"), and DnaT (protein i) has provided the necessary tools for addressing this issue. The phenotype of mutations in these genes, and other results described in this review, suggest that assembly of the primosome catalysed by PriA does in fact contribute at some stage to normal cellular DNA replication. A model for primososme-catalysed reactivation of a dysfunctional replication fork is discussed.     

Initiation of Escherichia coli minichromosome replication at oriC and at protein n'' recognition sites. Two modes for initiating DNA synthesis in vitro.

The start sites for leading and lagging DNA strands were determined in vitro with minichromosomes as templates. Fragments from replication intermediates were analyzed by hybridization to single-stranded probes. Leading strand synthesis in the counterclockwise direction was found to originate in or close to (position 248 to -44) the minimal origin. Complementary lagging strand synthesis started several positions to the left outside of oriC. The results suggest in addition a concerted synthesis of leading and lagging strands following the dnaA directed assembly of initiation proteins at double-stranded oricC DNA (pre-replisome). In addition, DNA synthesis could initiate at protein n' recognition sequences located within and clockwise to the asnA gene. Initiation at n' sites was dependent on protein i activity, whereas leading and lagging strand initiation in the oriC region was not affected by protein i. Our results argue against an involvement of the phi X174-type primosome in the initiation of discontinuous DNA synthesis at oriC. An alternative function is suggested.     

n' Protein activator sites of plasmid pBR322 are not essential for its DNA replication

The lagging strand DNA synthesis of the Escherichia coli bacterial chromosome and plasmids is thought to be initiated by the mobile promotor, the primosome. This primosome is assembled at a specific site on single-stranded DNA. This process is initiated by the interaction of one of the at least seven components, the n' protein, with this site. Indeed n' protein activator sites are found in the plasmids Col E1 and pBR322. To investigate the in vivo function of these n' protein sites, deletion derivates of pBR322 were constructed in which the n' protein sites are removed. The deletion plasmids show no change in stability and only threefold reduction in copy number compared to pBR322. Using a transduction system for single-stranded plasmid DNA it was shown that no other specific initiation signals for lagging strand DNA synthesis were present in the deletion plasmids. It was concluded that the n' protein activator sites in pBR322 are not essential for its DNA replication in vivo.     

Characteristics of replication of small colicinogenic plasmids

Specificity of small multicopy colicinogenic plasmids ColA, ColD, ColE2 and ColK replication has been compared with the one of ColE1 plasmid. Copy number for these plasmids per host cell has been estimated under the normal conditions of cellular growth and under the conditions of chloramphenicol-inhibited growth. DNA polymerase I and dnaB protein, an obligatory component for elongation step in replication, have been shown to be necessary for the plasmids replication. Initiation of plasmids replication has been demonstrated to be independent of dnaA and dnaC proteins. Replication of plasmid ColE2, being similar in its main features to replication of other plasmids from this group, has an important distinction. It requires de novo protein synthesis implying that ColE2 replicon may be different from ColA, ColD, ColK, ColE1 replicons. Thus study of the inducible A, D, K, El colicin synthesis coded by the corresponding plasmids has revealed the similarity regulation of genes, determining the synthesis of each of the mentioned colicins.     

Rifampicin-resistant initiation of DNA synthesis on the isolated strands of ColE plasmid DNA.

The opposite strands of the ColE1 and ColE3 plasmids were isolated as circular single-stranded DNA molecules. These molecules were compared with M13 and phi X174 viral DNA with respect to their capacity to function as templates for in vitro DNA synthesis by a replication enzyme fraction from Escherichia coli. It was found for both ColE plasmids that the conversion of H as well as L strands to duplex DNA molecules closely resembles phi X174 complementary strand synthesis and occurs by a rifampicin-resistant priming mechanism involving the dnaB, dnaC, and dnaG gene products. Restriction analysis of partially double-stranded intermediates indicates that preferred start sites for DNA synthesis are present on both strands of the ColE1 HaeII-C fragment. Inspection of the nucleotide sequence of this region reveals structural similarities with the origin of phi X174 complementary strand synthesis. We propose that the rifampicin-resistant initiation site (rri) in the ColE1 L strand is required for the priming of discontinuous lagging strand synthesis during vegetative replication and that the rri site in the H strand is involved in the initiation of L strand synthesis during conjugative transfer.     

Roles of phi X174 type primosome- and G4 type primase-dependent primings in initiation of lagging and leading strand syntheses of DNA replication

Eleven single strand initiation sequences (ssi) were isolated from various plasmid genomes using a plaque-morphology assay. Out of seven ssi that require dnaB and dnaC functions for replication in a crude in vitro system, six use a phi X174 type priming mechanism, and a phi X174 type primosome is assembled at these sequences from the purified proteins, n'(priA), n(priB), n"(priC), dnaT, dnaB, dnaC, and primase. The same ssi potentiate dATPase activity of n' protein, and thus represent new n' protein recognition sequences (n'-pas). Based on sequence homology, two structural groups are evident. Two sequences show a strong homology with the phi X174 site, whereas three share extensive homology with the previously characterized n'-pas of ColE1, ssiA(ColE1). All the n'-pas have a potential to form stem and loop structures, although sequence homology between the two classes is absent. In addition to the phi X174 type priming, three ssi do not require either dnaB or dnaC function for replication, and use a G4 type priming, requiring only SSB and primase. The 5' ends of primer RNA synthesized by primase are localized within the vicinity of one of the three blocks of highly conserved nucleotide sequences. Deletions of parts of these conserved sequences result in loss of priming activity, suggesting that they are important for priming on the G4 type ssi, which are termed G site. The general significance of these two types of priming in initiation of lagging or leading strand synthesis as well as various modes of initiation at origins of replication are proposed.     

Replication of ColE2 and ColE3 plasmids In vitro replication dependent on plasmid-coded proteins

Summary We developed an in vitro replication system for ColE2 and ColE3 plasmids using cell extracts prepared from bacteria with or without these plasmids. DNA synthesis depended on host DNA polymerase I and was sensitive to rifampicin and chloramphenicol. Preincubation of the extracts with plasmid DNA, however, allowed replication of template DNA added subsequently in a plasmid-specific manner in the presence of rifampicin and chloramphenicol. The plasmid-specified trans-acting factor(s) was detected in cell extracts from bacteria carrying a recombinant plasmid with the region of ColE2 or ColE3 encoding the Rep protein. The plasmid-specified factor(s) consisted at least in part of protein, probably the Rep protein. In vitro replication started within a region of ColE2 or ColE3 containing the smallest cis-acting segment essential for in vivo replication and proceeded in a fixed direction.     

Interaction of dnaA46 protein with a stimulatory protein in replication from the Escherichia coli chromosomal origin

Highly purified preparations of dnaA46 protein have permitted its biochemical characterization in comparison with the activities of wild type dnaA protein. We have determined that dnaA46 protein was reduced in its ability to bind to DNA fragments containing oriC. This mutant protein was also defective in binding ATP and was inactive for replication of oriC-containing plasmids in purified enzyme systems. In contrast, dnaA46 protein was active for oriC plasmid replication when added to reactions containing a crude enzyme fraction deficient in dnaA protein. One or more proteins have been identified which appear to interact with dnaA46 protein prior to DNA synthesis. These studies suggest that this interaction is thermolabile. Stimulation of dnaA46 protein activity resulted in a reduction of the prolonged lag prior to DNA synthesis.     

Plasmid ColE1 DNA replication in Escherichia coli strains temperature-sensitive for DNA replication

Mutants of the dnaA, dnaC, dnaD, polC, dnaF and dnaG gene loci were tested for their capacity for colicinogenic plasmid E1 (ColE1) replication at a non-permissive temperature. It was found that ColE1 replication was independent of the dnaA gene function and dependent on dnaC, D, F and G. ColE1 replication in the polC mutant E486 continued for several hours but at a greatly reduced rate. No effect was found of the dnaG mutation on thymine-deprivation-induced "priming" of ColE1 replication at the non-permissive temperature. The mutants also were tested for aberrant replication intermediates of plasmid DNA as well as a temperature sensitive supercoiled DNA-protein relaxation complex. RNA-containing supercoils were found to accumulate in a poIC mutant also blocked for protein synthesis.     

Discriminatory function of ribonuclease H in the selective initiation of plasmid DNA replication.

The initiation stage of ColE1-type plasmid replication was reconstituted with purified protein fractions from Escherichia coli. The reconstituted system included DNA polymerase I, DNA ligase, RNA polymerase, DNA gyrase, and a discriminating activity copurifying with RNAase H (but free of RNAase III). Initiation of DNA synthesis in the absence of RNAase H did not occur at the normal replication origin and was non-selective with respect to the plasmid template. In the presence of RNAase H the system was selective for ColE1-type plasmids and could not accept the DNA of non-amplifiable plasmids. Electron microscopic analysis of the reaction product formed under discriminatory conditions indicated that origin usage and directionally of ColE1, RSF1030, and CloDF13 replication were consistent with the normal replication pattern of these plasmids. It is proposed that the initiation of ColE1-type replication depends on the formation of an extensive secondary structure in the origin primer RNA that prevents its degradation by RNAase H.     

Deletion analysis of the cloned replication origin region from bacteriophage M13.

A cloned 270-nucleotide fragment from the origin region of the M13 duplex replicative form DNA confers an M13-dependent replication mechanism upon the plasmid vector pBR322. This M13 insert permits M13 helper-dependent replication of the hybrid plasmid in polA cells which are unable to replicate the pBR322 replicon alone. Using in vitro techniques, we have constructed several plasmids containing deletions in the M13 DNa insert. The endpoints of these deletions have been determined by DNA sequence analysis and correlated with the transformation and replication properties of each plasmid. Characterization of these deletion plasmids allows the following conclusions. (i) The initiation site for M13 viral strand replication is required for helper-dependent propagation of the chimeric plasmid. (ii) A DNA sequence in the M13 insert, localized between 89 and 129 nucleotides from the viral strand initiation site, is necessary for efficient transformation of polA cells. A chimeric plasmid containing the viral strand initiation site, but lacking this additional 40 nucleotide M13 sequence, transforms helper-infected cells at a frequency approximately 10(4)-fold less than that of plasmids containing this additional DNA segment. (iii) The entire M13 complementary strand origin can be deleted without affecting M13-dependent transformation by the hybrid plasmids. We propose a model in which replication of one strand of duplex chimera initiates by nicking at the gene II protein nicking site in the viral strand of the M13 insert, followed by asymmetric single-strand synthesis. Initiation of the complementary strand possibly occurs within plasmid sequences.     

Accumulation of ColE1 early replicative intermediates catalyzed by extracts of Escherichia coli dnaG mutant strains.

To investigate the events occurring at the replication forks during DNA synthesis, we studied the replication of plasmid ColE1 DNA in vivo and in vitro, using strains of Escherichia coli carrying either the dnaG3(Ts) or dnaG308(Ts) mutation. Extracts of both mutant strains supported in vitro DNA synthesis, but the amount of [3H]TMP incorporated into DNA was always less for mutant extracts than for extracts of revertant strains, which were able to grow at 42 degrees C. Sucrose gradient analysis, Southern blot analysis, and electron microscopy showed that mutant extracts synthesize a large number of early replicative intermediates containing one or two (one on each template strand) fragments at the origin of replication and some completed molecules, either open circles or covalently closed circles. The revertant extracts synthesized more completed molecules although the fraction of templates used was about the same, 0.27 for mutant extracts and 0.21 for revertant extracts. Our results show that a mutation in dnaG causes a block in the synthesis of both leading and lagging strands after initiation, which results in the accumulation of early replicative intermediates. The average size of the newly replicated region in the early replicative intermediates is 730 bases as measured from electron micrographs of early replicative intermediates. We conclude that the DnaG protein functions in lagging strand synthesis and may be necessary for the continuation of leading strand synthesis as well.     

Replication initiated at the origin (oriC) of the E. coli chromosome reconstituted with purified enzymes

A crude soluble enzyme system capable of authentic replication of a variety of oriC plasmids has been replaced by purified proteins constituting three functional classes: initiation proteins (RNA polymerase, dnaA protein, gyrase) that recognize the oriC sequence and presumably prime the leading strand of the replication fork; replication proteins (DNA polymerase III holoenzyme, single-strand binding protein, primosomal proteins) that sustain progress of the replication fork; and specificity proteins (topoisomerase I, RNAase H₁ protein HU) that suppress initiation of replication at sequences other than oriC, coated with dnaA protein. Protein HU and unidentified factors in crude enzyme fractions stimulate replication at one or more stages. Replication has been separated temporally and physically into successive stages of RNA synthesis and DNA synthesis.     

Effect of altered efficiency of the RNA I and RNA II promoters on in vivo replication of ColE1-like plasmids in Escherichia coli

Summary Thermal inactivation of the dnaA gene product leads to a considerable decrease in the rate of replication of ColE1-like plasmids. To test the possiblity that the dnaA protein may affect synthesis of RNA I, which is an inhibitor of primer formation, or synthesis of RNA II, which is the primer precursor for replication of ColE1 (Tomizawa and Itoh 1982), the effect of the dnaA46 mutation on the efficiency of the RNA I and the RNA II promoters was examined. It appears that thermal inactivation of the dnaA protein results in a considerable increase in the activity of the RNA I promoter. We suggest that overproduction of RNA I in dnaA mutants grown at the restrictive temperature is responsible for the reduced replication of ColE1-like plasmids.It has been found that addition of rifampicin to cultures of the dnaA46 or the dna ⁺ strain grown at 42°C results in a dramatic increase in the rate of replication of ColE1-like plasmids. We show that the activity of the RNA II promoter at 42°C is exceptionally resistant to rifampicin. In the presence of the drug, this leads, to an altered ratio of RNA I to RNA II, in favor of the latter RNA species.     

Studies on the role of the phi X174 gene A protein in phi X174 viral strand synthesis. III. Replication of DNA containing two viral replication origins

Supercoiled plasmid bearing two wild-type phi X origin sequences on the same strand supported the phi X A protein-dependent in vitro formation of two smaller single-stranded circles, the lengths of which were equivalent to the distance between the two origins. Additional double origin plasmids were utilized to determine whether origins defective in the initial nicking event (initiation) could support circularization (termination). In all cases tested, the presence of a mutant origin on the same strand with a wild-type origin affected the level of replication in a manner consistent with the previously determined activity of the mutant origin. When a functional mutant origin was present on the same strand as a wild-type origin, the efficiency of replication and the DNA products formed were almost identical to those of the plasmid containing two wild-type origins. Plasmid DNA bearing both a wild-type origin and a mutant origin that did not support phi X A protein binding or nicking activity, on the other hand, supported efficient DNA synthesis of only full-length circular products, indicating that the origin defective for initiation was incapable of supporting termination. In contrast, the presence of a wild-type origin and an origin that did bind the phi X A protein but was not cleaved resulted in a marked decrease in DNA synthesis along with the production of only full-length products. This suggests that the phi X A protein stalls when it encounters a sequence to which it can bind but cannot cleave. Replication of double origin plasmids containing one functional phi X origin on each strand of the supercoiled DNA was also examined. With such templates, synthesis from the wild-type origin predominated, indicating preferential cleavage of the intact origin sequence. Replication of such substrates also produced a number of aberrant structures, the properties of which suggested that interstrand exchange of the phi X A protein had occurred.     

Requirement of the Escherichia coli dnaA gene function for ori-2-dependent mini-F plasmid replication.

The mini-F plasmids pSC138, pKP1013, and pKV513 were unable to transform Escherichia coli cells with a dnaA-defective mutation under nonpermissive conditions. The dnaA defect was suppressed for host chromosome replication either by the simultaneous presence of the rnh-199 (amber) mutation or by prophage P2 sig5 integrated at the attP2II locus on the chromosome, both providing new origins for replication independent of dnaA function. The dnaA mutations tested were dnaA17, dnaA5, and dnaA46. dnaA5 and dnaA46 are missense mutations. dnaA17 is an amber mutation whose activity is controlled by the temperature-sensitive amber suppressor supF6. Under permissive conditions in which active DnaA protein was available, the mini-F plasmids efficiently transformed the cells. However, the transformants lost the plasmid as the cells multiplied under conditions in which DnaA protein was inactivated or its synthesis was arrested. As controls, plasmids pSC101 and pBR322 were examined along with mini-F; pSC101 behaved in the same manner as mini-F, showing complete dependence on dnaA for stable maintenance, whereas pBR322 was indifferent to the dnaA defect. Thus, ori-2-dependent mini-F plasmid replication seems to require active dnaA gene function. This notion was strengthened by the results of deletion analysis which revealed that integrity of at least one of the two DnaA boxes present as a tandem repeat in ori-2 was required for the origin activity of mini-F replication.