Formation of soluble inclusion bodies by hpv e6 oncoprotein fused to maltose-binding protein

Many polypeptides overexpressed in bacteria are produced misfolded and accumulate as solid structures called inclusion bodies. Inclusion-body-prone proteins have often been reported to escape precipitation when fused to maltose-binding protein (MBP). Here, we have examined the case of HPV 16 oncoprotein E6. The unfused sequence of E6 is overexpressed as inclusion bodies in bacteria. By contrast, fusions of E6 to the C-terminus of MBP are produced soluble. We have analyzed preparations of soluble MBP-E6 fusions by using three independent approaches: dynamic light scattering, lateral turbidimetry, and sandwich ELISA. All three methods showed that MBP-E6 preparations contain highly aggregated material. The behavior of these soluble aggregates under denaturating conditions suggests that they are formed by agglomeration of misfolded E6 moieties. However, precipitation is prevented by the presence of the folded and highly soluble MBP moieties, which maintain the aggregates in solution. Therefore, the fact that a protein or protein domain is produced soluble when fused to the C-terminus of a carrier protein does not guarantee that the protein of interest is properly folded and active. We suggest that aggregation of fusion proteins should be systematically assayed, especially when these fusions are to be used for binding measurements or activity tests.     

Protein mutagenesis with monodispersity-based quality probing: selective inactivation of p53 degradation and DNA-binding properties of HPV E6 oncoprotein

Interpretation of protein mutagenesis experiments requires the ability to distinguish functionally relevant mutations from mutations affecting the structure. When a protein is expressed soluble in bacteria, properly folded mutants are expected to remain soluble whereas misfolded mutants should form insoluble aggregates. However, this rule may fail for proteins fused to highly soluble carrier proteins. In a previous study, we analysed the biophysical status of HPV oncoprotein E6 fused to the C-terminus of maltose-binding protein (MBP) and found that misfolded E6 moieties fused to MBP formed soluble aggregates of high molecular weight. By contrast, preparations of properly folded E6 fused to MBP were monodisperse. Here, we have used this finding to evaluate the quality of 19 MBP-fused E6 site-directed mutants by using a light scattering assay performed in a fluorimeter. This assay guided us to rule out structurally defective mutants and to obtain functionally relevant E6 mutants selectively altered for two molecular activities: degradation of tumour suppressor p53 and DNA recognition.     

Formation of well-defined soluble aggregates upon fusion to MBP is a generic property of E6 proteins from various human papillomavirus species

Protein aggregation is a main barrier hindering structural and functional studies of a number of interesting biological targets. The E6 oncoprotein of Human Papillomavirus strain 16 (E6(16)) is difficult to express under a native soluble form in bacteria. Produced as an unfused sequence, it forms inclusion bodies. Fused to the C-terminus of MBP, it is mainly produced in the form of soluble high molecular weight aggregates. Here, we produced as MBP-fusions seven E6 proteins from other HPV strains (5, 11, 18, 33, 45, 52, and 58) belonging to four different species, and we compared their aggregation state to that of MBP-E6(16). Using a fast mutagenesis method, we changed most non-conserved cysteines to the isosteric residue serine to minimize disulfide bridge-mediated aggregation during purification. Static and dynamic light scattering measurements, ultracentrifugation and electron microscopy demonstrated the presence in all MBP-E6 preparations of soluble high-molecular weight aggregates with a well-defined spherical shape. These aggregated particles are relatively monodisperse but their amount and their size vary depending on the conditions of expression and the strain considered. For all strains, minimal aggregate formation occurs when the expression is performed at 15 degrees C. Such observations suggest that the assembly of MBP-E6 aggregates takes place in vivo during protein biosynthesis, rather than occurring during purification. Finally, we show that all MBP-E6 preparations contain two zinc ions per protein monomer, suggesting that E6 domains within the high molecular weight aggregates possess a native-like fold, which enables correct coordination to the metal center.     

Formation of fluorescent proteins by the attachment of phycoerythrobilin to R-phycoerythrin alpha and beta apo-subunits

Formation of fluorescent proteins was explored after incubation of recombinant apo-subunits of phycobiliprotein R-phycoerythrin with phycoerythrobilin chromophore. Alpha and beta apo-subunit genes of R-phycoerythrin from red algae Polisiphonia boldii were cloned in plasmid pET-21d(+). Hexahistidine-tagged alpha and beta apo-subunits were expressed in Escherichia coli. Although expressed apo-subunits formed inclusion bodies, fluorescent holo-subunits were constituted after incubation of E. coli cells with phycoerythrobilin. Holo-subunits contained both phycoerythrobilin and urobilin chromophores. Fluorescence and differential interference contrast microscopy showed polar location of holo-subunit inclusion bodies in bacterial cells. Cells containing fluorescent holo-subunits were several times brighter than control cells as found by fluorescence microscopy and flow cytometry. The addition of phycoerythrobilin to cells did not show cytotoxic effects, in contrast to expression of proteins in inclusion bodies. In an attempt to improve solubility, R-phycoerythrin apo-subunits were fused to maltose-binding protein and incubated with phycoerythrobilin both in vitro and in vivo. Highly fluorescent soluble fusion proteins containing phycoerythrobilin as the sole chromophore were formed. Fusion proteins were localized by fluorescence microscopy either throughout E. coli cells or at cell poles. Flow cytometry showed that cells containing fluorescent fusion proteins were up to 10 times brighter than control cells. Results indicate that fluorescent proteins formed by attachment of phycoerythrobilin to expressed apo-subunits of phycobiliproteins can be used as fluorescent probes for analysis of cells by microscopy and flow cytometry. A unique property of these fluorescent reporters is their utility in both properly folded (soluble) subunits and subunits aggregated in inclusion bodies.     

One-step affinity purification of fusion proteins with optimal monodispersity and biological activity: application to aggregation-prone HPV E6 proteins

Background

Bacterial expression and purification of recombinant proteins under homogeneous active form is often challenging. Fusion to highly soluble carrier proteins such as Maltose Binding Protein (MBP) often improves their folding and solubility, but self-association may still occur. For instance, HPV E6 oncoproteins, when produced as MBP-E6 fusions, are expressed as mixtures of biologically inactive oligomers and active monomers. While a protocol was previously developed to isolate MBP-E6 monomers for structural studies, it allows the purification of only one MBP-E6 construct at the time. Here, we explored a parallelizable strategy more adapted for biophysical assays aiming at comparing different E6 proteins.

Results

In this study, we took advantage of the distinct size and diffusion properties of MBP-E6 monomers and oligomers to separate these two species using a rapid batch preparation protocol on affinity resins. We optimized resin reticulation, contact time and elution method in order to maximize the proportion of monomeric MBP-E6 in the final sample. Analytical size-exclusion chromatography was used to quantify the different protein species after purification. Thus, we developed a rapid, single-step protocol for the parallel purification of highly monomeric MBP-E6 samples. MBP-fused HPV16 E6 samples obtained by this approach were validated by testing the binding to their prototypical peptide targets (the LXXLL motif from ubiquitine ligase E6AP) by BIAcore-SPR assay.

Conclusions

We have designed a rapid single-step batch affinity purification approach to isolate biologically active monomers of MBP-fused E6 proteins. This protocol should be generalizable to isolate the monomer (or the minimal biologically active oligomer) of other proteins prone to self-association.

     

Properties of soluble fusions between mammalian aspartic proteinases and bacterial maltose-binding protein

The mammalian aspartic proteinases procathepsin D and pepsinogen form insoluble inclusion bodies when expressed in bacteria. They become soluble but nonnative when synthesized as fusions to the carboxy terminus of E. coli maltose-binding protein (MBP). Since these nonnative states of the two aspartic proteinases showed no tendency to form insoluble aggregates, their biophysical properties were analyzed. The MBP portions were properly folded as shown by binding to amylose, but the aspartic proteinase moieties failed to bind pepstatin and lacked enzymatic activity, indicating that they were not correctly folded. When treated with proteinase K, only the MBP portion of the fusions was resistant to proteolysis. The fusion between MBP and cathepsin D had increased hydrophobic surface exposure compared to the two unfused partners, as determined by bis-ANS binding. Ultracentrifugal sedimentation analysis of MBP–procathepsin D and MBP–pepsinogen revealed species with very large and heterogeneous sedimentation values. Refolding of the fusions from 8 M urea generated proteins no larger than dimers. Refolded MBP–pepsinogen was proteolytically active, while only a few percent of renatured MBP–procathepsin D was obtained. The results suggest that MBP–aspartic proteinase fusions can provide a source of soluble but nonnative folding states of the mammalian polypeptides in the absence of aggregation.     

Galectin-1 as a fusion partner for the production of soluble and folded human β-1,4-galactosyltransferase-T7 in E. coli

The expression of recombinant proteins in Escherichia coli often leads to inactive aggregated proteins known as the inclusion bodies. To date, the best available tool has been the use of fusion tags, including the carbohydrate-binding protein; e.g., the maltose-binding protein (MBP) that enhances the solubility of recombinant proteins. However, none of these fusion tags work universally with every partner protein. We hypothesized that galectins, which are also carbohydrate-binding proteins, may help as fusion partners in folding the mammalian proteins in E. coli. Here we show for the first time that a small soluble lectin, human galectin-1, one member of a large galectin family, can function as a fusion partner to produce soluble folded recombinant human glycosyltransferase, β-1,4-galactosyltransferase-7 (β4Gal-T7), in E. coli. The enzyme β4Gal-T7 transfers galactose to xylose during the synthesis of the tetrasaccharide linker sequence attached to a Ser residue of proteoglycans. Without a fusion partner, β4Gal-T7 is expressed in E. coli as inclusion bodies. We have designed a new vector construct, pLgals1, from pET-23a that includes the sequence for human galectin-1, followed by the Tev protease cleavage site, a 6× His-coding sequence, and a multi-cloning site where a cloned gene is inserted. After lactose affinity column purification of galectin-1-β4Gal-T7 fusion protein, the unique protease cleavage site allows the protein β4Gal-T7 to be cleaved from galectin-1 that binds and elutes from UDP-agarose column. The eluted protein is enzymatically active, and shows CD spectra comparable to the folded β4Gal-T1. The engineered galectin-1 vector could prove to be a valuable tool for expressing other proteins in E. coli.     

The N-terminal stem region of bovine and human beta1,4-galactosyltransferase I increases the in vitro folding efficiency of their catalytic domain from inclusion bodies

Many recombinant proteins overexpressed in Escherichia coli are generally misfolded, which then aggregate and accumulate as inclusion bodies. The catalytic domain (CD) of bovine and human beta1,4-galactosyltransferase (beta4Gal-T), expressed in E. coli, it also accumulates as inclusion bodies. We studied the effect of the fusion of the stem region (SR), as an N-terminal extension of the catalytic domain, on the in vitro folding efficiencies of the inclusion bodies. The stem region fused to the catalytic domain (SRCD) increases the folding efficiency of recombinant protein with native fold compared to the protein that contains only the CD. During in vitro folding, also promotes considerably the solubility of the misfolded proteins, which do not bind to UDP-agarose columns and exhibit no galactosyltransferase activity. In contrast, the misfolded proteins that consist of only the CD are insoluble and precipitate out of solution. It is concluded that a protein domain that is produced in a soluble form does not guarantee the presence of the protein molecules in a properly folded and active form. The stem domain has a positive effect on the in vitro folding efficiency of the catalytic domain of both human and bovine beta4Gal-T1, suggesting that the stem region acts as a chaperone during protein folding. Furthermore, investigation of the folding conditions of the sulphonated inclusion bodies resulted in identifying a condition in which the presence of PEG-4000 and L-arginine, compared to their absence, increased the yields of native CD and SRCD 7- and 3-fold, respectively.     

Improving the soluble expression of aequorin in Escherichia coli using the chaperone-based approach by co-expression with artemin

Abstract

Escherichia coli is a common host that is widely used for producing recombinant proteins. However, it is a simple approach for production of heterologous proteins; the major drawbacks in using this organism include incorrect protein folding and formation of disordered aggregated proteins as inclusion bodies. Co-expression of target proteins with certain molecular chaperones is a rational approach for this problem. Aequorin is a calcium-activated photoprotein that is often prone to form insoluble inclusion bodies when overexpressed in E. coli cells resulting in low active yields. Therefore, in the present research, our main aim is to increase the soluble yield of aequorin as a model protein and minimize its inclusion body content in the bacterial cells. We have applied the chaperone-assisted protein folding strategy for enhancing the yield of properly folded protein with the assistance of artemin as an efficient molecular chaperone. The results here indicated that the content of the soluble form of aequorin was increased when it was co-expressed with artemin. Moreover, in the co-expressing cells, the bioluminescence activity was higher than the control sample. We presume that this method might be a potential tool to promote the solubility of other aggregation-prone proteins in bacterial cells.     

Electrostatic interaction-induced inclusion body formation of glucagon-like peptide-1 fused with ubiquitin and cationic tag

In an attempt to produce glucagon-like peptide-1 (GLP-1) using recombinant Escherichia coli, ubiquitin (Ub) as a fusion partner was fused to GLP-1 with the 6-lysine tag (K6) for simple purification. Despite the high solubility of ubiquitin, the fusion protein K6UbGLP-1 was expressed mainly as insoluble inclusion bodies in E. coli. In order to elucidate this phenomenon, various N- and C-terminal truncates and GLP-1 mutants of K6UbGLP-1 were constructed and analyzed for their characteristics by various biochemical and biophysical methods. The experiment results obtained in this study clearly demonstrated that the insoluble aggregation of K6UbGLP-1 was attributed to the electrostatic interaction between the N-terminal 6-lysine tag and the C-terminal GLP-1 before the completion of folding which might be one of the reasons for protein misfolding frequently observed in many foreign proteins introduced with charged amino acid residues such as the His tag and the protease recognition sites. The application of a cation exchanger for neutralizing the positive charge of the 6-lysine tag in solid-phase refolding of K6UbGLP-1 successfully suppressed the electrostatic interaction-driven aggregation even at a high protein concentration, resulting in properly folded K6UbGLP-1 for GLP-1 production.     

Refolding process of cysteine-rich proteins:Chitinase as a model

Background:

Recombinant proteins overexpressed in E. coli are usually deposited in inclusion bodies. Cysteines in the protein contribute to this process. Inter- and intra- molecular disulfide bonds in chitinase, a cysteine-rich protein, cause aggregation when the recombinant protein is overexpressed in E. coli. Hence, aggregated proteins should be solubilized and allowed to refold to obtain native- or correctly- folded recombinant proteins.

Methods:

Dilution method that allows refolding of recombinant proteins, especially at high protein concentrations, is to slowly add the soluble protein to refolding buffer. For this purpose: first, the inclusion bodies containing insoluble proteins were purified; second, the aggregated proteins were solubilized; finally, the soluble proteins were refolded using glutathione redox system, guanidinium chloride, dithiothreitol, sucrose, and glycerol, simultaneously.

Results:

After protein solubilization and refolding, SDS-PAGE showed a 32 kDa band that was recognized by an anti-chitin antibody on western blots.

Conclusions:

By this method, cysteine-rich proteins from E. coli inclusion bodies can be solubilized and correctly folded into active proteins.Key Words: Chitinase, Cysteine-rich proteins, Protein refolding, Protein solubilization     

High-level production and optimization of monodispersity of 11beta-hydroxysteroid dehydrogenase type 1

11beta-Hydroxysteroid dehydrogenase type 1 (11beta-HSD1) is an intraluminally oriented, endoplasmic reticulum (ER)-bound enzyme catalyzing the interconversion between inactive cortisone and hormonally active cortisol. Heterologous production of 11beta-HSD1, devoid of its N-terminal transmembrane segment, is possible but yields only small amounts of soluble protein. Here we show that the soluble portion of recombinant 11beta-HSD1 produced in E. coli is found mainly as multimeric aggregates in the absence of detergent, and to a large extent associated with the endogenous chaperonin GroEL and other E. coli proteins. By co-overexpressing GroEL/ES and adding an 11beta-HSD1 inhibitor during protein synthesis, we have increased the accumulation of soluble 11beta-HSD1 by more than one order of magnitude. Using monodispersity as a screening criterion, we have also optimized the purification process by evaluating various solubilizing systems for the chromatographic steps, finally obtaining stable monodisperse preparations of both human and guinea pig 11beta-HSD1. By analytical ultracentrifugation, we could demonstrate that 11beta-HSD1 mainly exists as a dimer in the solubilized state. Moreover, active site titration of human 11beta-HSD1 revealed that at least 75% of the protein in a typical preparation represents active enzyme. Equilibrium unfolding experiments indicate that addition of inhibitor and the cofactor NADP(H) can stabilize the conformational stability of this enzyme in an additive manner. The outlined procedure may provide a general method for preparing similar proteins to oligomeric homogeneity and with retained biological activity.     

Expression of foreign proteins in<Emphasis Type="Italic"> Escherichia coli</Emphasis> by fusing with an archaeal FK506 binding protein

Improper protein-folding often results in inclusion-body formation in a protein expression system using Escherichia coli. To express such proteins in the soluble fraction of E. coli cytoplasm, we developed an expression system by fusing the target protein with an archaeal FK506 binding protein (FKBP). It has been reported that an archaeal FKBP from a hyperthermophilic archaeon, Thermococcus sp. KS-1 (TcFKBP18), possesses not only peptidyl–prolyl cis–trans isomerase activity, but also chaperone-like activity to enhance the refolding yield of an unfolded protein by suppressing irreversible protein aggregation. To study the effect of this fusion strategy with FKBP on the expression of foreign protein in E. coli, a putative rhodanese (thiosulfate sulfurtransferase) from a hyperthermophilic archaeon and two mouse antibody fragments were used as model target proteins. When they were expressed alone in E. coli, they formed insoluble aggregates. Their genes were designed to be expressed as a fusion protein by connecting them to the C-terminal end of TcFKBP18 with an oligopeptide containing a thrombin cleavage site. By fusing TcFKBP18, the expression of the target protein in the soluble fraction was significantly increased. The percentage of the soluble form in the expressed protein reached 10–28% of the host soluble proteins. After purification and protease digestion of the expressed antibody fragment–TcFKBP18 fusion protein, the cleaved antibody fragment (single-chain Fv) showed specific binding to the antigen in ELISA. This indicated that the expressed antibody fragment properly folded to the active form.     

Expression and purification of receptor for activated C-kinase 1 (RACK1)

Receptor for activated C-kinase (RACK1) binds to protein kinase C and functions as an anchor for several other cellular components. Most in vitro studies of RACK1 have been carried out with RACK1 fused to a soluble fusion protein partner, such as GST or MBP. Here, we show that fusion complexes may exist as large soluble aggregates and thereby lead to false conclusions about the biological activity of RACK1. We developed a purification procedure that gave soluble monodisperse molecules of the protein. The RACK1 gene was cloned and expressed in a pMAL vector. After purification of the resulting MBP-RACK1 fusion protein, RACK1 was excised from MBP by thrombin, rendering RACK1 in a soluble monodisperse form as monitored by fluorimetric static light scattering, gel filtration, and ultracentrifugation. Circular dichroism analysis revealed that RACK1 was properly folded with a T(m) of approximately 62 degrees C and contained the predicted portions of secondary structures. The biological activity of the purified protein was verified by binding to activated protein kinase C. The production of soluble, high-purity RACK1 will allow structural studies and functional in vitro studies to identify interacting partners to this important scaffold protein.     

Expression of honeybee prepromelittin as a fusion protein in Escherichia coli.

Strategies for the expression of precursors of eukaryotic secreted proteins as part of fused proteins in Escherichia coli have been explored. A fusion protein with beta-galactosidase at the N-terminal end and honeybee prepromelittin at the C-terminal end (beta-gal-pM) was expressed in low amounts as a cleaved polypeptide, from which the promelittin portion had been removed. Inclusion in the induction culture of 10 mM MgCl2 or 8.3% (v/v) ethanol, inhibitors of signal peptidase, gave rise to the full-length beta-gal-pM fusion protein. The results suggest that a soluble recombinant fusion protein with a signal peptide in an internal location 660 residues from the N-terminus is recognized by the E. coli translocation apparatus in the inner membrane and by leader peptidase. High-level production (about 45% of total cellular proteins) of prepromelittin was achieved when it was part of a fusion protein at the C-terminus of a truncated insoluble polypeptide from bacteriophage gene 10. This fusion protein separated into inclusion bodies in an aggregated form. In contrast, attempts to express prepromelittin by itself or at the N-terminal end of a fusion with mouse dihydrofolate reductase (pM-DHFR) proved unsuccessful.     

A simple and effective strategy for solving the problem of inclusion bodies in recombinant protein technology: His-tag deletions enhance soluble expression

The formation of inclusion bodies (IBs) in recombinant protein biotechnology has become one of the most frequent undesirable occurrences in both research and industrial applications. So far, the pET System is the most powerful system developed for the production of recombinant proteins when Escherichia coli is used as the microbial cell factory. Also, using fusion tags to facilitate detection and purification of the target protein is a commonly used tactic. However, there is still a large fraction of proteins that cannot be produced in E. coli in a soluble (and hence functional) form. Intensive research efforts have tried to address this issue, and numerous parameters have been modulated to avoid the formation of inclusion bodies. However, hardly anyone has noticed that adding fusion tags to the recombinant protein to facilitate purification is a key factor that affects the formation of inclusion bodies. To test this idea, the industrial biocatalysts uridine phosphorylase from Aeropyrum pernix K1 and (+)-γ-lactamase and (?)-γ-lactamase from Bradyrhizobium japonicum USDA 6 were expressed in E. coli by using the pET System and then examined. We found that using a histidine tag as a fusion partner for protein expression did affect the formation of inclusion bodies in these examples, suggesting that removing the fusion tag can promote the solubility of heterologous proteins. The production of soluble and highly active uridine phosphorylase, (+)-γ-lactamase, and (?)-γ-lactamase in our results shows that the traditional process needs to be reconsidered. Accordingly, a simple and efficient structure-based strategy for the production of valuable soluble recombinant proteins in E. coli is proposed.     

Improved Recovery of a Fusion Protein Containing the Antigenic Domain 1 of the Human Cytomegalovirus Glycoprotein B

Heterologous expression in Escherichia coli often leads to production of the expressed proteins as insoluble and inactive inclusion bodies. The general strategy for protein recovery includes isolation and washing of inclusion bodies, solubilization of aggregated protein and refolding of solubilized protein. The process of refolding, as well as the other steps involved in inclusion body recovery, must be optimized according to the characteristics of each protein. For the development of reliable and inexpensive serodiagnostic tests, the antigenic domain 1 (AD-1) of human cytomegalovirus glycoprotein B was expressed in E. coli and a process was developed to increase recovery of the fusion protein containing AD-1. A comparison of disruption methods and different conditions involved in recovery of this fusion protein from inclusion bodies is presented. The developed method gives a high yield of the fusion protein with a purity sufficient for use in diagnostic tests.     

Systematic analysis of fusion and affinity tags using human aspartyl-tRNA synthetase expressed in E. coli

Fusion and affinity tags are popular tools for the expression of mammalian proteins in bacteria. To facilitate the selection of expression approaches, a systematic comparison was performed. We cloned, sequenced, and expressed in Escherichia coli ubiquitin- and SUMO-hDRS fusion proteins with biotin- or 6xHis-tags. The tagging of hDRS with ubiquitin or SUMO was necessary to express properly folded and biologically active enzyme. Similar enhancement of hDRS activity was obtained by fusion to ubiquitin or SUMO. Ubiquitin, SUMO, biotin, and hexahistidine tags did not appreciably interfere with hDRS activity. Fusion proteins were specifically cleaved without altering the N-terminal of hDRS. After cleavage hDRS remained soluble and active with a specific activity comparable to that of the fused protein. Similar activity was observed with biotin- and 6xHis-tagging of hDRS. Higher purity but significantly lower yields of hDRS were obtained using biotin-tagging. Overall we demonstrated ubiquitin and SUMO fusion proteins similarly enhanced the proper folding of hDRS expressed in E. coli. In comparison to previous expressions of hDRS as a GST fusion, ubiquitin, and SUMO fusions provided higher yields and easier purification and cleavage.     

Effect of location of the His-tag on the production of soluble and functional Buthus martensii Karsch insect toxin

The low yield and poor folding efficiency in vivo of soluble and active recombinant cysteine-rich proteins expressed in Escherichia coli are a major challenge for large-scale protein production and purification. Expression vectors containing Buthus martensii Karsch insect toxin (BmK IT) fused to the C terminus of the intein Ssp DnaB were constructed in an attempt to overcome this problem. Following purification and intein self-cleavage, the fusion protein His(6)-intein-IT produced insoluble BmK IT, while intein-IT-His(6) generated soluble and properly folded BmK IT. This result indicated that the positioning of the His(6) tag has a key role in the production of soluble and functional BmK IT.