Oriented immobilization of biologically active proteins as a tool for revealing protein interactions and function

The advantages of oriented immobilization of biologically active proteins are good steric accessibilities of active binding sites and increased stability. This not only may help to increase the production of preparative procedures but is likely to promote current knowledge about how the living cells or tissues operate. Protein inactivation starts with the unfolding of the protein molecule by the contact of water with hydrophobic clusters located on the surface of protein molecules, which results in ice-like water structure. Reduction of the nonpolar surface area by the formation of a suitable biospecifc complex or by use of carbohydrate moieties thus may stabilize proteins. This review discusses oriented immobilization of antibodies by use of immobilized protein A or G. The section about oriented immobilization of proteins by use of their suitable antibodies covers immobilization of enzymes utilizing their adsorption on suitable immunosorbents prepared using monoclonal or polyclonal antibodies, preparation of bioaffinity adsorbent for the isolation of concanavalin A and immobilization of antibodies by use of antimouse immunoglobulin G, Fc-specific (i.e. specific towards the constant region of the molecule). In the further section immobilization of antibodies and enzymes through their carbohydrate moieties is described. Oriented immobilization of proteins can be also based on the use of boronate affinity gel or immobilized metal ion affinity chromatography technique. Biotin–avidin or streptavidin techniques are mostly used methods for oriented immobilization. Site-specific attachment of proteins to the surface of solid supports can be also achieved by enzyme, e.g., subtilisin, after introduction a single cysteine residue by site-directed mutagenesis.     

Immobilization of phosphorylase B and study of its enzymatic and immunological properties]

The properties of phosphorylase B (PhB) immobilized on an agar derivative were studied. It was shown that the enzyme activity makes up to 15-20% as compared to that of the soluble enzyme, the Km value for glucose-1-phosphate is increased 1.5-fold and the pH optimum remains unchanged, whereas the thermostability of enzyme shows a considerable increase. PhB immobilized on a highly activated sorbent completely losses its enzymatic activity but retains its antigenic properties and binds 1.6-2 mol antibodies (per monomer). Using immunosorbents, purified antibodies homogeneous during electrophoresis in polyacrylamide gel were isolated. The immunosorbent capacity is 500-800 mg of antibodies per 1 g of dry weight. The purified antibodies are characterized by a lower inhibitory power upon interaction with soluble PhB. The type of inhibition of both immobilized and soluble enzyme is similar. It is assumed that immobilization produces conformational changes only at the active site of enzyme, which is spatially separated from the antibody binding site.     

Electrochemical biosensing of pesticide residues based on affinity biocomposite platforms

A novel and very sensitive electrochemical immunosensing strategy for the detection of atrazine based on affinity biocomposite transducers is presented. Firstly, the graphite-epoxy composite transducer was bulk-modified with different universal affinity biomolecules, such as avidin and Protein A. Two strategies for the immobilization of the anti-atrazine antibodies on both biocomposite transducers were evaluated: 'wet-affinity' and 'dry-assisted affinity' immobilization. Finally, the performance of a novel anti-atrazine immunocomposite bulk-modified with anti-atrazine antibodies was also evaluated. The better immobilization performance of the anti-atrazine antibodies was achieved by 'dry-assisted affinity' immobilization on Protein A (2%) graphite-epoxy biocomposite (ProtA(2%)-GEB) as a transducer. The immunological reaction for the detection of atrazine performed on the ProtA(2%)-GEB biosensors is based on a direct competitive assay using atrazine-HRP tracer as the enzymatic label. The electrochemical detection is thus achieved through a suitable substrate and a mediator for the enzyme HRP. This novel strategy was successfully evaluated using spiked orange juice samples. The detection limit for atrazine in orange juices using the competitive electrochemical immunosensing assay was found to be 6 x 10(-3) microgL-1 (0.03 nmolL-1) thus this biosensing method accomplishes by far the LODs required for the European Community directives for potable water and food samples (0.1 microgL-1). This strategy offers great promise for rapid, simple, cost effective, and on-site biosensing of biological, food, and environmental samples.     

Co-immobilization of different enzyme activities to non-woven polyester surfaces

Co-immobilization was applied to combine complementary enzyme reactions. Therefore, trypsin was co-immobilized together with both, lipase and alpha-amylase, onto the surface of non-woven polyester material. The progress of the immobilization reaction was directly monitored by investigating covalent fixation of the enzymes to the polyester flees using (1)H-MAS-NMR. Co-immobilization of the different types of enzymes to the polyester support showed retained enzymatic activity. However, a competition of binding to the support was observed. Increasing amounts of one type of enzyme reduced the degree of immobilization for the other type. In order to investigate the distribution of trypsin and alpha-amylase on the polyester support, the flees was treated with a mixture of rhodamine isothiocyanate labeled with anti-trypsin antibodies and fluorescein isothiocyanate labeled with anti-alpha-amylase antibodies. Using fluorescence microscopy, the co-immobilization was analyzed by selective excitation of both chromophores at 480 and 530 nm, respectively. In addition, fluorescence spectroscopy was applied by direct labeling of trypsin and lipase prior to co-immobilization to the polyester support. A special prism of plexiglass was constructed, which fit into a 10 x 10 mm fluorescence cuvette in that way that a diagonal plane was formed within the cuvette. The non-woven support was fixed in the cuvette and fluorescence spectra were obtained to characterize the amount of different enzymes linked to the support. Using FRET it was demonstrated that a uniform distribution of the various enzyme species was achieved, where the different enzyme activities are bound on the support in close neighborhood to one another.     

Purification of anti-chymotrypsin antibodies for the preparation of a bioaffinity matrix with oriented chymotrypsin as immobilized ligand

Polyclonal antibodies suitable for the oriented immobilization of chymotrypsin we prepared by chromatography on a bioaffinity matrix which had the enzyme immobilized through its active site to antilysin, covalently linked to bead cellulose. After periodate oxidation of their carbohydrate moieties, the isolated antibodies were coupled to a hydrazide derivative of bead cellulose. The periodate oxidation step, which led to greater efficiency and stability of the immunosorbent, had no deleterious effect on antibody activity as assessed by ELISA. Addition of chymotrypsin to the immunosorbent yielded an enzymically active bioaffinity matrix with the optimum molar enzyme/antibody ratio of 2.     

Determination of concentration and activity of immobilized enzymes

Methods that directly measure the concentration of surface-immobilized biomolecules are scarce. More commonly, the concentration of the soluble molecule is measured before and after immobilization, and the bound concentration is assessed by elimination, assuming that all bound molecules are active. An assay was developed for measuring the active site concentration, activity, and thereby the catalytic turnover rate (k_cat) of an immobilized dihydrofolate reductase as a model system. The new method yielded a similar first-order rate constant, k_cat, to that of the same enzyme in solution. The findings indicate that the activity of the immobilized enzyme, when separated from the surface by the DNA spacers, has not been altered. In addition, a new immobilization method that leads to solution-like activity of the enzyme on the surface is described. The approaches developed here for immobilization and for determining the concentration of an immobilized enzyme are general and can be extended to other enzymes, receptors, and antibodies.     

Distribution of immobilized enzymes on porous membranes

In this article, the results from a theoretical and experimental investigation of enzyme immobilization in porous membranes are reported. A theoretical model of the immobilization process, which accounts for restricted diffusion of enzyme in the pores of the membrane, has been developed. The model predicts the effect of immobilization kinetics and time of immobilization on the enzyme distribution in the pores of the membrane. The immobilization of glucose oxidase and glucose oxidase-biotin conjugate on porous alumina membranes was experimentally investigated. Enzyme uptake data was correlated to the theory to determine the rate constant of imobilization and the distribution of the enzyme in the pore. Immobilization studies were carried out for enzyme adsorption and for enzyme attachment by covalent coupling. The distribution of enzyme was experimentally studied by assembling five membranes in the diffusion cell. Following immobilization, the membranes were separated and each was assayed for activity. The amount of active enzyme present in each membrane yielded a discrete distribution that compared well with that predicted by theory. (c) 1992 John Wiley & Sons, Inc.     

Comparative study of horseradish peroxidase immobilization on modification of a gold surface using a surface plasmon resonance method

Horseradish peroxidase is immobilized by a periodate method on the gold surfaces previously modified with 16-mercapto-hexadecanoic acid or with hydrogen disulfide and soybean trypsin inhibitor. The effect of gold surface modification conditions on the immobilization of the enzyme as well as on the properties of the immobilized glycoprotein are studied using surface plasmon resonance technique. Restoration of the ability to bind specific antibodies is demonstrated for the immobilized enzyme. The low level of non-specific antibody binding to the immobilized glycoprotein is also shown.     

Immobilization–stabilization of the lipase from Thermomyces lanuginosus: Critical role of chemical amination

This paper describes the immobilization and stabilization of the lipase from Thermomyces lanuginosus (TLL) on glyoxyl agarose. Enzymes attach to this support only by the reaction between several aldehyde groups of the support and several Lys residues on the external surface of the enzyme molecules at pH 10. However, this standard immobilization procedure is unsuitable for TLL lipase due to the low stability of TLL at pH 10 and its low content on Lys groups that makes that the immobilization process was quite slow. The chemical amination of TLL, after reversible immobilization on hydrophobic supports, has been shown to be a simple and efficient way to improve the multipoint covalent attachment of this enzyme. The modification enriches the enzyme surface in primary amino groups with low pKb, thus allowing the immobilization of the enzyme at lower pH values. The aminated enzyme was rapidly immobilized at pH 9 and 10, with activities recovery of approximately 70%. The immobilization of the chemically modified enzyme improved its stability by 5-fold when compared to the non-modified enzyme during thermal inactivation and by hundreds of times when the enzyme was inactivated in the presence of organic solvents, being both glyoxyl preparations more stable than the enzyme immobilized on bromocyanogen.     

Optimizing immobilization on two-dimensional carboxyl surface: pH dependence of antibody orientation and antigen binding capacity

The performance of immunosensors is highly dependent on the amount of immobilized antibodies and their remaining antigen binding capacity. In this work, a method for immobilization of antibodies on a two-dimensional carboxyl surface has been optimized using quartz crystal microbalance biosensors. We show that successful immobilization is highly dependent on surface pK_a, antibody pI, and pH of immobilization buffer. By the use of EDC/sulfo-NHS (1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride/N-hydroxysulfosuccinimide) activation reagents, the effect of the intrinsic surface pK_a is avoided and immobilization at very low pH is therefore possible, and this is important for immobilization of acidic proteins. Antigen binding capacity as a function of immobilization pH was studied. In most cases, the antigen binding capacity followed the immobilization response. However, the antigen-to-antibody binding ratio differed between the antibodies investigated, and for one of the antibodies the antigen binding capacity was significantly lower than expected from immobilization in a certain pH range. Tests with anti-Fc and anti-Fab₂ antibodies on different antibody surfaces indicated that the orientation of the antibodies on the surface had a profound effect on the antigen binding capacity of the immobilized antibodies.     

Renewable enzyme reactors based on beds of artificial gel antibodies

A novel approach is described for the synthesis of beds for enzyme reactors. The method is based on the use of artificial antibodies in the form of polyacrylamide gel particles with diameters around 0.1–0.3 mm. These gel particles mimic protein antibodies, raised in experimental animals, in the sense that they selectively recognize and adsorb only the protein present during the preparation of the “antibodies”. The gel antibodies have several advantages over conventional protein antibodies, which can be taken advantage of in the design of enzyme reactors; for instance, if upon prolonged use the immobilized enzyme loses its activity it can easily be replaced by an active enzyme, which is not possible when the enzyme is immobilized via a conventional protein antibody (a new bed with immobilized protein antibodies must be prepared); and equally or more remarkable: the enzyme can be applied in the form of a non-purified extract since the selectivity of the artificial gel antibodies is so high that they will “fish-out” the enzyme, but no other proteins in the extract. In addition, no preconcentration of the enzyme solution is required prior to the immobilization, since the enzyme is enriched at the top of the column upon the application. These unique properties make enzyme reactors based on artificial gel antibodies very attractive, also in process chromatography. The potential application range of the artificial gel antibodies is enormous since the same method for their synthesis can be used independent of the structure and the size of the “antigen”; for instance, renewable biosensors based on gel antibodies for the selective detection of protein biomarkers, as well as pathogenic viruses, bacteria, and spores (for instance Anthrax) should not be difficult to design.     

Immobilization of immunoglobulin-G-binding domain of Protein A on a gold surface modified with biotin ligase

Protein A from Staphylococcus aureus specifically binds to the Fc region of immunoglobulin G (IgG) and is widely used as a scaffold for the immobilization of IgG antibodies on solid supports. It is known that the oriented immobilization of Protein A on solid supports enhances its antibody-binding capability in comparison with immobilization in a random manner. In the current work, we developed a novel method for the oriented immobilization of the IgG-binding domain of Protein A based on the biotinylation reaction from archaeon Sulfolobus tokodaii. Biotinylation from S. tokodaii has a unique property in that the enzyme, biotin protein ligase (BPL), forms a stable complex with its biotinylated substrate protein, biotin carboxyl carrier protein (BCCP). Here, BCCP was fused to the IgG-binding domain of Protein A, and the resulting fusion protein was immobilized on the BPL-modified gold surface of the sensor chip for quartz crystal microbalance through complexation between BCCP and BPL. The layer of the IgG-binding domain prepared in this way successfully captured the antibody, and the captured antibody retained high antigen-binding capability.     

A Study on the Comparative Stability of Insoluble Complexes of Glucose Oxidase Obtained with Concanavalin A and Specific Polyclonal Antibodies

Summary The formation of insoluble complexes of glycoenzymes with lectins and antibodies is one of the simplest methods of enzyme immobilization. Insoluble complexes of glucose oxidase were simply obtained by mixing the enzyme with concanavalin A or a specific polyclonal antibodies solution. The concanavalin A and immunocomplexes of glucose oxidase retained more than 80% of the original enzyme activity. Expression of very high enzyme activity in insoluble complexes suggested that these aggregates were quite porous and easily accessible to substrates. Insoluble complexes of glucose oxidase showed very high stability against denaturation induced by pH, temperature, urea and water-miscible organic solvents. Complexes of glucose oxidase obtained with concanavalin A and glycosyl-specific antiglucose oxidase polyclonal antibodies were quite comparable in stability while complexes prepared using polyclonal antibodies raised against the native glucose oxidase were slightly less stable. The complexes of glucose oxidase obtained with glycosyl-specific antiglucose oxidase polyclonal antibodies showed very high stability against inactivation mediated by exposure to water-miscible organic solvents. Insoluble complexes of glucose oxidase were cross-linked with glutaraldehyde to maintain their integrity in the presence of substrates. The cross-linking of complexes resulted in a slight decrease in enzyme activity but showed a pronounced enhancement in stability against various forms of denaturation.     

Atomic force spectroscopy-based study of antibody pesticide interactions for characterization of immunosensor surface

Development of immunobiosensor detector surfaces involves the immobilization of active antibodies on the capture surface without any significant loss of antigen binding activity. An atomic force microscope (AFM) was used to directly evaluate specific interactions between pesticides and antibodies on a biosensor surface. Oriented immobilization of antibodies against two herbicide molecules 2,4-dichlorophenoxyacetic acid (2,4-D) and atrazine, on gold, was carried out to create the active immunobiosensor surfaces. The adhesive forces between immobilized antibodies and their respective antigens were measured by force spectroscopy using hapten-carrier protein functionalized AFM cantilevers. Relative functional affinity (avidity) measurements of the antibodies carried out prior to immobilization, well correlated with subsequent AFM force measurement observations. Analysis showed that immobilization had not compromised the reactivity of the surface immobilized antibody molecules for antigen nor was there any change in their relative quality with respect to each other. The utility of the immunoreactive surface was further confirmed using a Surface Plasmon Resonance (SPR) based detection system. Our study indicates that AFM can be utilized as a convenient immunobiosensing tool for confirming the presence and also assessing the strength of antibody-hapten interactions on biosensor surfaces under development.     

Silver ion microplates for immunoassays.

Microplate wells can be coated with silver ions using glutaraldehyde as a spacer molecule and thiourea as a complexing ligand. Microwells containing surface silver ions are shown to immobilize biotin-labeled horseradish peroxidase (HRP) in active form, while showing very little affinity for the unlabeled enzyme. These plates can also immobilize biotin-labeled antibodies that exhibit bioactivity after immobilization. Silver ions are needed for the complexation of the biotinylated enzyme or antibody because microwells modified to contain surface amine or thiourea molecules do not immobilize appreciable amounts of the labeled proteins. A maximum surface coverage for biotin-labeled HRP of 40 ng/cm2 and an immobilization binding constant of Km = 8 x 10(9)/M are determined from serial dilutions in a microplate. Detection of as little as 6.7 fmol HRP is achieved using antibodies immobilized on the silver ion-modified microplates. Active antibody surface densities were estimated to be between 130 and 260 nm2/antibody molecule. Background binding of HRP to the modified silver ion microplates was very low, allowing for reasonably accurate detection between 10(-14) and 10(-11) mol HRP.     

Plant seed oil-bodies as an immobilization matrix for a recombinant xylanase from the rumen fungus Neocallimastix patriciarum

Canola seed oil-bodies were investigated as a production vehicle and immobilization matrix for xylanases. A recombinant xynC gene from Neocallimastix patriciarum encoding a xylanase (XynC) was fused to an oleosin coding sequence suitable for targeting the xylanase to the oil-body membrane. This fusion gene was introduced into Brassica napus using Agrobacterium-mediated transformation. Transgenic Canola plants were obtained expressing xylanase which was targeted to the oil-bodies of seeds as shown by analysis with XynC-specific antibodies. Oil-bodies extracted from transgenic seeds exhibited xylanase activity, indicating the immobilization of XynC on the surface of oil bodies and the functioning of the xylanase as a fusion protein. The immobilized XynC retained its optimal temperature, K_m value and specificity. However, it exhibited reduced sensitivity to pH. Furthermore, it was shown that the enzyme immobilized on oil-bodies could be recycled by flotation several times without loss of activity.     

Polyclonal Antibodies in Microplates to Predict the Maximum Adsorption Activities of Enzyme/Mutants from Cell Lysates

With microplate-immobilized polyclonal antibodies against a starting enzyme or its active mutant bearing consistent accessible epitopes, the maximum activity of an adsorbed enzyme/mutant (Vs) was predicted for comparison to recognize weakly-positive mutants. Rabbit antisera against Escherichia coli alkaline phosphatase (ECAP) were fractionated with 33% ammonium sulfate to yield crude polyclonal antibodies for conventional immobilization in 96-well microplates. The response curve of the activities of ECAP/mutant adsorbed by the immobilized polyclonal antibodies to protein quantities from a cell lysate was fit to an approximation model to predict Vs. With 0.4 μg crude polyclonal antibody for immobilization, Vs was consistent for ECAP in cell lysates bearing fourfold differences in its apparent specific activities when its abundance was greater than 0.9%. The ratio of Vs of the mutant R168K to that of ECAP was 1.5?±?0.1 (n?=?2), consistent with that of their specific activities after affinity purification. Unfortunately, the prediction of Vs with polyclonal antibodies that saturated microplate wells was ineffective to Pseudomonas aeruginosa arylsulfatase bearing less than 2% specific activity of ECAP. Therefore, with microplate-immobilized polyclonal antibodies to adsorb enzyme/mutants from cell lysates, high-throughput prediction of Vs was practical to recognize weakly-positive mutants of starting enzymes bearing fairly-high activities.     

Enzyme immobilization on nylon-optimization and the steps used to prevent enzyme leakage from the support

Because of its low cost, chemical and mechanical properties and ready availability in a number of different forms (e.g. powders, beads, nets, tubes, film, sheets, etc.) Nylon is an attractive matrix for enzyme immobilization. We report here a thorough evaluation of a protocol for enzyme immobilization on nylon film with relatively inexpensive and non-toxic reagents, involving acid hydrolysis, glutaraldehyde coupling and spacer molecules and employing beta-glucosidase and trypsin as model enzymes. We also describe steps for virtually eliminating enzyme leakage and non-specific binding. Individual steps in the procedure are simple and conditions flexible so, whilst evaluated in terms of binding proteins to nylon film, they should be applicable to other forms of nylon and suitable for binding most enzymes and proteins, including antibodies, providing a method having potential in both affinity chromatography/adsorption and in bioreactor applications.     

Immobilization and properties of carminomycin 4-O-methyltranferase, the enzyme which catalyzes the final step in the biosynthesis of daunorubicin in Streptomyces peucetius

The carminomycin 4-O-methyltransferase enzyme from Streptomyces peucetius was covalently immobilized on 3M Emphaze ABI-activated beads. Optimal conditions of time, temperature, pH, ionic strength, enzyme, substrate (carminomycin), and cosubstrate (S-adenosyl-L-methionine) concentrations were defined for the immobilization reaction. Protein immobilization yield ranged from 52% to 60%. Including carminomycin during immobilization had a positive effect on the activity of the immobilized enzyme but a strongly negative effect on the coupling efficiency. The immobilized enzyme retained at least 57% of its maximum activity after storage at 4 degrees C for more than 4 months. The properties of the free and immobilized enzyme were compared to determine whether immobilization could alter enzyme activity. Both soluble and bound enzyme exhibited the same pH profile with an optimum near 8.0. Immobilization caused an approximately 50% decrease in the apparent K(m) (K'(m)) for carminomycin while the K'(m) for S-adenosyl-L-methionine was approximately doubled. A 57% decrease in the V(max) value occurred upon immobilization. These changes are discussed in terms of active site modifications as a consequence of the enzyme immobilization. This system has a potential use in bioreactors for improving the conversion of carminomycin to daunorubicin. (c) 1995 John Wiley & Sons, Inc.     

Preparation and properties of immobilized amyloglucosidase on nonporous PS/PNaSS microspheres

Nonporous polystyrene/poly(sodium styrene sulfonate) (PS/PNaSS) microspheres were used for immobilization of amyloglucosidase and the properties of immobilized enzyme was studied and compared with those of free enzyme. Sulfonated groups on the PS/PNaSS microspheres present a very simple, mild, and time-saving process for enzyme immobilization. Nonporous microspheres provide their surface for immobilization of enzyme and prevent the diffusion limitation problem in the pore. Despite the high concentration of bound enzyme the influence of immobilization on kinematic parameters, K(m) and V(max), is relatively low compare to other porous supports. Simple and time-saving immobilization procedure as well as the effects of pH and temperature on immobilized enzyme also showed that the PS/PNaSS microspheres could be good support.