Production of recombinant herpes simplex virus protease in 10-L stirred vessels using a baculovirus–insect cell expression system

A gene expression system using recombinant Autographa californica nuclear polyhedrosis virus (baculovirus) and Sf-9 cells has been scaled up to the 10-L tank level and shown to be capable of producing herpes simplex virus (HSV) protease in serum-free media. High densities of Spodoptera frugiperda (Sf-9) cells were achieved by modifying two 10-L Biolafitte fermenters specifically for insect cell growth. The existing Rushton impellers were replaced by marine impellers to reduce shear and the aeration system was modified to allow external addition of air/O₂ mixtures at low flow rates through either the sparge line or into the head space of the fermenter. To inoculate the tanks, Sf-9 cells were adapted to grow to high cell densities (6–10 × 10⁶ cells ml⁻¹) in shake flasks in serum-free media. With these procedures, cell densities of 5 × 10⁶ cells ml⁻¹ were routinely achieved in the 10-L tanks. These cells were readily infected with recombinant baculovirus expressing the 247-amino acid catalytic domain of the HSV-1 strain 17 protease UL26 gene as a glutathione-S-transferase (GST) fusion protein (GST-247). Three days after infection at a multiplicity of infection (MOI) of 3 pfu cell⁻¹, the GST-247 fusion protein was purified from a cytoplasmic lysate by Glutathione Sepharose 4-B affinity chromatography with reproducible yields of 11–38 mg L⁻¹ of recombinant protein and ≥ 90% purity. Maximum production of this protein was observed at a cell density of 5.0 × 10⁶ cells ml⁻¹. Received 09 December 1996/ Accepted in revised form 13 April 1997     

Production of poly-β-hydroxybutyrate (PHB) by <Emphasis Type="Italic">Alcaligenes latus</Emphasis> from maple sap

Maple sap, an abundant natural product especially in Canada, is rich in sucrose and thus may represent an ideal renewable feedstock for the production of a wide variety of value-added products. In the present study, maple sap or sucrose was employed as a carbon source to Alcaligenes latus for the production of poly-β-hydroxybutyrate (PHB). In shake flasks, the biomass obtained from both the sap and sucrose were 4.4 ± 0.5 and 2.9 ± 0.3 g/L, and the PHB contents were 77.6 ± 1.5 and 74.1 ± 2.0%, respectively. Subsequent batch fermentation (10 L sap) resulted in the formation of 4.2 ± 0.3 g/L biomass and a PHB content of 77.0 ± 2.6%. The number average molecular weights of the PHB produced by A. latus from maple sap and pure sucrose media were 300 ± 66 × 10³ and 313 ± 104 × 10³ g/mol, respectively. Near-infrared, ¹H magnetic resonance imaging (MRI), and ¹³C-MRI spectra of the microbially produced PHB completely matched those obtained with a reference material of poly[(R)-3-hydroxybutyric acid]. The polymer was found to be optically active with [α]²⁵ _D equaled to −7.87 in chloroform. The melting point (177.0°C) and enthalpy of fusion (77.2 J/g) of the polymer were also in line with those reported, i.e., 177°C and 81 J/g, respectively.     

Candida bombicola : production of novel alkyl glycosides based on glucose/2-dodecanol

Candida bombicola produces glycolipids containing sophorose and a glycosidically/esterically bound ω- or (ω−1)-hydroxy C₁₆₍₁₈₎ acid. Here we describe novel glycolipids from this source. Glucose and 2-dodecanol were used for the cultivation of the yeast, one part of the racemic secondary alcohol being connected directly with a glucose or a sophorose unit. A relatively high content of yeast extract, up to 4 g l⁻¹, and subsequently higher biomass concentrations favoured the production of novel products. The provision of 150 g l⁻¹ glucose and 15 g l⁻¹ 2-dodecanol resulted in maximum production of 22 g l⁻¹ novel alkyl glycosides (more than 90% novel products). The molecular structures were analysed by gas chromatography, fast atom bombardment/mass spectrometry, ¹H- and ¹³C-nuclear magnetic resonance and optical rotation studies. Sophorose and glucose were detected as carbohydrate moieties, (S)-(+)-2-dodecanol (88%) was found to be the major lipid moiety. The new glycolipids are suitable biosurfactants, reducing the surface tension of water from 72 mN m⁻¹ to 32–38 mN m⁻¹. Received: 8 December 1997 / Received revision: 19 March 1998 / Accepted: 20 March 1998     

An alginate-layer technique for culture of Brassica oleracea L. protoplasts

Ten accessions belonging to the Brassica oleracea subspecies alba and rubra, and to B. oleracea var. sabauda were used in this study. Protoplasts were isolated from leaves and hypocotyls of in vitro grown plants. The influence of selected factors on the yield, viability, and mitotic activity of protoplasts immobilized in calcium alginate layers was investigated. The efficiency of protoplast isolation from hypocotyls was lower (0.7 ± 0.1 × 10⁶ ml⁻¹) than for protoplasts isolated from leaf mesophyll tissue (2 ± 0.1 × 10⁶ ml⁻¹). High (70–90%) viabilities of immobilized protoplasts were recorded, independent of the explant sources. The highest proportion of protoplasts undergoing divisions was noted for cv. Reball F1, both from mesophyll (29.8 ± 2.2%) and hypocotyl (17.5 ± 0.3%) tissues. Developed colonies of callus tissue were subjected to regeneration and as a result plants from six accessions were obtained.     

Photoautotrophic Production of Lipids by Some <Emphasis Type="Italic">Chlorella</Emphasis> Strains

The microalgae Chlorella protothecoides UTEX 25, Chlorella sp. TISTR 8991, and Chlorella sp. TISTR 8990 were compared for use in the production of biomass and lipids under photoautotrophic conditions. Chlorella sp. TISTR 8990 was shown to be potentially suitable for lipid production at 30°C in a culture medium that contained only inorganic salts. For Chlorella sp. TISTR 8990 in optimal conditions in a stirred tank photobioreactor, the lipid productivity was 2.3 mg L⁻¹ h⁻¹ and after 14 days the biomass contained more than 30% lipids by dry weight. To attain this, the nitrogen was provided as KNO₃ at an initial concentration of 2.05 g L⁻¹ and chelated ferric iron was added at a concentration of 1.2 × 10⁻⁵ mol L⁻¹ on the ninth day. Under the same conditions in culture tubes (36 mm outer diameter), the biomass productivity was 2.8-fold greater than in the photobioreactor (0.125 m in diameter), but the lipid productivity was only 1.2-fold higher. Thus, the average low-light level in the photobioreactor actually increased the biomass specific lipid production compared to the culture tubes. A light-limited growth model closely agreed with the experimental profiles of biomass production, nitrogen consumption, and lipid production in the photobioreactor.     

Screening of high-yielding biocontrol bacterium Bs<Emphasis Type="Italic">-</Emphasis>916 mutant by ion implantation

Bacillus subtilis 916 was an effective biocontrol agent in control rice sheath blight caused by Rhizoctonia solani. To further improve its antagonistic ability, low-energy ion implantation was applied in Bs-916. We studied the effects of different doses of N⁺ implantation. The optimum dose of ion implantation for the Bs-916 was from 15 × 2.6 × 10¹⁴ N⁺/cm² to 25 × 2.6 × 10¹⁴ N⁺/cm². The mutant strain designated as Bs-H74 was obtained, which showed higher inhibition activity in the screening plate. Its inhibition zone against the indicator organism increased by 30.7% compared to the parental strain. The control effect of rice sheath blight was improved by 14.6% over that of Bs-916. Thin-layer chromatography and high-performance liquid chromatography analysis indicated that lipopeptides produced by Bs-916 and the mutant strains belonged to the surfactin family. Bs-H74 produced approximately 3.0-fold surfactin compared to that of Bs-916. To determine the role of surfactin in biocontrol by Bs-916, we tested another mutant strain, Bs-M49, which produced lower levels of surfactin significantly, and found that Bs-M49 had no obvious effects against R. solani. These results suggested that the surfactin produced by Bs-916 plays an important role in the suppression of sheath blight. These observations also showed that the Bs-H74 mutant strain is a better biocontrol agent than the parental strain.     

An altered camelid-like single domain anti-idiotypic antibody fragment of HM-1 killer toxin: acts as an effective antifungal agent

Phage-display and competitive panning elution leads to the identification of minimum-sized antigen binders together with conventional antibodies from a mouse cDNA library constructed from HM-1 killer toxin neutralizing monoclonal antibody (nmAb-KT). Antigen-specific altered camelid-like single-domain heavy chain antibody (scFv K2) and a conventional antibody (scFv K1) have been isolated against the idiotypic antigen nmAb-KT. The objectives of the study were to examine (1) their properties as compared to conventional antibodies and also (2) their antifungal activity against different pathogenic and non-pathogenic fungal species. The alternative small antigen-binder, i.e., the single-domain heavy chain antibody, was originated from a conventional mouse scFv phage library through somatic hyper-mutation while selection against antigen. This single-domain antibody fragment was well expressed in bacteria and specifically bound with the idiotypic antigen nmAb-KT and had a high stability and solubility. Experimental data showed that the binding affinity for this single-domain antibody was 272-fold higher (K _d = 1.07 × 10⁻¹⁰ M) and antifungal activity was three- to fivefold more efficient (IC₅₀ = 0.46 × 10⁻⁶ to 1.17 × 10⁻⁶ M) than that for the conventional antibody (K _d = 2.91 × 10⁻⁸ M and IC₅₀ = 2.14 × 10⁻⁶ to 3.78 × 10⁻⁶ M). The derived single-domain antibody might be an ideal scaffold for anti-idiotypic antibody therapy and the development of smaller peptides or peptide mimetic drugs due to their less complex antigen-binding site. We expect that such single-domain synthetic antibodies will find their way into a number of biotechnological or medical applications.     

Propionic acid fermentation of glycerol and glucose by Propionibacterium acidipropionici and Propionibacterium freudenreichii ssp.shermanii

A comparative study was carried out in anaerobic batch cultures on 20 g/l of either glycerol or glucose using two propionibacteria strains, Propionibacterium acidipropionici and Propionibacterium freudenreichii ssp. shermanii. In all cases, fermentation end-products were the same and consisted of propionic acid as the major product, acetic acid as the main by-product and two minor metabolites, n-propanol and succinic acid. Evidence was provided that greater production of propionic acid by propionibacteria was obtained with glycerol as carbon and energy sources. P. acidipropionici showed higher efficiency in glycerol conversion to propionic acid with a faster substrate consumption (0.64 g l⁻¹ h⁻¹) and a higher propionic acid production (0.42 g l⁻¹ h⁻¹ and 0.79 mol/mol). The almost exclusive production of propionic acid from glycerol by this bacterium suggested an homopropionic tendency of this fermentation. Acetic acid final concentration was two times lower on glycerol (2 g/l) than on glucose (4 g/l) for both micro-organisms. P. freudenreichii ssp. shermanii exhibited a glycerol fermentation pattern typical of non-associated glycerol-consumption-product formation. This could indicate a particular metabolism for P. freudenreichii ssp. shermanii oriented towards the production of other specific components. These results tend to show that glycerol could be an excellent alternative to conventional carbon sources such as carbohydrates for propionic acid production. Received: 21 May 1999 / Accepted: 1 November 1999     

Sulfated extracellular polysaccharide production by the halophilic cyanobacterium Aphanocapsa halophytia immobilized on light-diffusing optical fibers

 The cyanobacterium, Aphanocapsa halo-phytia MN-11, was immobilized in calcium alginate gel and coated on light-diffusing optical fibers (LDOF) for sulfated extracellular polysaccharide production. Results indicated that sulfated extracellular polysaccharide production depends on the number of immobilized cells and the light intensity. In addition, the production rate reached 116.0 mg (mg dry cells)^-1 day^-1 when the cells that were immobilized on LDOF were incubated under a light intensity of 1380 cd sr m^-2 at a cell concentration of 1.0×10⁸ cells/cm³ gel. Cells immobilized on LDOF produced about ten times more sulfated extracellular polysaccharide than those immobilized in calcium alginate beads only (11.7 mg(mg dry cells)^-1day^-1). Received: 31 March 1995/Revised last revision 12 June 1995/Accepted 26 July 1995     

Purification and characterization of MerR, the regulator of the broad-spectrum mercury resistance genes in Streptomyces lividans 1326

Streptomyces lividans 1326 carries inducible mercury resistance genes on the chromosome, which are arranged in two divergently transcribed operons. Expression of the genes is negatively regulated by the repressor MerR, which binds in the intercistronic region between the two operons. The merR gene was expressed in E. coli using a T7 RNA polymerase/promoter expression system, and MerR was purified to around 95% homogeneity by ammonium sulfate precipitation, gel filtration and affinity chromatography. Gel filtration showed that the native MerR is a dimer with a molecular mass of 31 kDa. Two DNA binding sites were identified in the intercistronic mer promoter region by footprinting experiments. No evidence for cooperativity in the binding of MerR to the adjacent operator sequences was observed in gel mobility shift assays. The dissociation constants (K_D) for binding of MerR were: binding site I, 8.5 × 10⁻⁹ M; binding site II, 1.2 × 10⁻⁸ M; and for the complete promoter/operator region 1 × 10⁻⁸ M. The half-life of the MerR-DNA complex was 19.4 min and 18.8 min for binding site I and binding site II, respectively. The K_D value for binding of mercury(II)chloride to MerR, again determined by mobility shift assay, was 1.1 × 10⁻⁷ M. Received: 18 August 1998 / Accepted: 5 May 1999     

Kinetic models for phycocyanin production by high cell density mixotrophic culture of the microalga Spirulina platensis

Phycocyanin production by high cell density cultivation of Spirulina platensis in batch and fed-batch modes in 3.7-L bioreactors with a programmed stepwise increase in light intensity program was investigated. The results showed that the cell density in fed-batch culture (10.2 g L⁻¹) was 4.29-fold that in batch culture (2.38 g L⁻¹), and the total phycocyanin production in the fed-batch culture (0.795 g L⁻¹) was 3.05-fold that in the batch culture (0.261 g L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, phycocyanin formation, as well as glucose consumption was proposed. The data fitted the models well (r ² > 0.99). Furthermore, based on the kinetic models, the potential effects of light limitation and photoinhibition on cell growth and phycocyanin formation can be examined in depth. The models demonstrated that the optimal light intensity for mixotrophic growth of Spirulina platensis in batch or fed-batch cultures using a 3.7-L bioreactor was 80160 μE m⁻² s⁻¹, and the stepwise increase in light intensity can be replaced by a constant light intensity mode. Received 28 July 1998/ Accepted in revised form 8 October 1998     

Continuous production of l(+)-lactic acid by Lactobacillus casei in two-stage systems

A two-stage two-stream chemostat system and a two-stage two-stream immobilized upflow packed-bed reactor system were used for the study of lactic acid production by Lactobacillus casei subsp casei. A mixing ratio of D ₁₂/D ₂= 0.5 (D = dilution rate) resulted in optimum production, making it possible to generate continuously a broth with high lactic acid concentration (48 g l⁻¹) and with a lowered overall content of initial yeast extract (5  g l⁻¹), half the concentration supplied in the one-step process. In the two-stage chemostat system, with the first stage at pH 5.5 and 37 °C and a second stage at pH 6.0, a temperature change from 40 °C to 45 °C in the second stage resulted in a 100% substrate consumption at an overall dilution rate of 0.05 h⁻¹. To increase the cell mass in the system, an adhesive strain of L. casei was used to inoculate two packed-bed reactors, which operated with two mixed feedstock streams at the optimal conditions found above. Lactic acid fermentation started after a lag period of cell growth over foam glass particles. No significant amount of free cells, compared with those adhering to the glass foam, was observed during continuous lactic acid production. The extreme values, 57.5 g l⁻¹ for lactic acid concentration and 9.72 g l⁻¹ h⁻¹ for the volumetric productivity, in upflow packed-bed reactors were higher than those obtained for free cells (48 g l⁻¹  and 2.42 g l⁻¹ h⁻¹) respectively and the highest overall l(+)-lactic acid purity (96.8%) was obtained in the two-chemostat system as compared with the immobilized-cell reactors (93%). Received: 4 December 1997 / Received revision: 23 February 1998 / Accepted: 14 March 1998     

Assessing the heat tolerance of 17 beef cattle genotypes

Cattle production plays a significant role in terms of world food production. Nearly 82% of the world’s 1.2 billion cattle can be found in developing countries. An increasing demand for meat in developing countries has seen an increase in intensification of animal industries, and a move to cross-bred animals. Heat tolerance is considered to be one of the most important adaptive aspects for cattle, and the lack of thermally-tolerant breeds is a major constraint on cattle production in many countries. There is a need to not only identify heat tolerant breeds, but also heat tolerant animals within a non-tolerant breed. Identification of heat tolerant animals is not easy under field conditions. In this study, panting score (0 to 4.5 scale where 0 = no stress and 4.5 = extreme stress) and the heat load index (HLI) [HLI_BG<25°C = 10.66 + 0.28 × rh + 1.30 × BG – WS; and, HLI _{BG> 25°C} = 8.62 + 0.38 × rh + 1.55 × BG – 0.5 × WS + e^{(2.4 – WS)}, where BG = black globe temperature (^oC), rh = relative humidity (decimal form), WS = wind speed (m/s) and e is the base of the natural logarithm] were used to assess the heat tolerance of 17 genotypes (12,757 steers) within 13 Australian feedlots over three summers. The cattle were assessed under natural climatic conditions in which HLI ranged from thermonuetral (HLI < 70) to extreme (HLI > 96; black globe temperature = 40.2°C, relative humidity = 64%, wind speed = 1.58 m/s). When HLI > 96 a greater number (P < 0.001) of pure bred Bos taurus and crosses of Bos taurus cattle had a panting score ≥ 2 compared to Brahman cattle, and Brahman-cross cattle. The heat tolerance of the assessed breeds was verified using panting scores and the HLI. Heat tolerance of cattle can be assessed under field conditions by using panting score and HLI.     

Influence of cell immobilization on the production of benzaldehyde and benzyl alcohol by the white-rot fungi Bjerkandera adusta, Ischnoderma benzoinum and Dichomitus squalens

Three white-rot basidiomycetes, Bjerkandera adusta, Ischnoderma benzoinum and Dichomitus squalens, were cultivated on a liquid medium supplemented with l-phenylalanine, a precursor for benzaldehyde (bitter almond aroma) and benzyl alcohol. Remarkable amounts of benzaldehyde (587 mg l⁻¹) were found in cultures of B. adusta. Immobilization of this fungus on polyurethane foam cubes allowed an 8.3-fold increase of the production of benzaldehyde and a 15-fold increase of the productivity as compared with non-immobilized cells. Aryl-alcohol oxidase activity was only detected in B. adusta. This activity was also significantly enhanced in immobilized cells, suggesting that it plays an important role in benzaldehyde biosynthesis. Conversely, consistent amounts of benzyl alcohol (340 mg l⁻¹ for B. adusta and I. benzoinum and 100 mg l⁻¹ for D. squalens) were produced by the three fungi when immobilized. Laccase activity was found only in the strains I. benzoinum and D. squalens. This activity was markedly enhanced in free cells cultures. Immobilization of the fungi did not promote benzyl alcohol production by comparison with free cell cultures (500 mg l⁻¹). Received: 10 December 1996 / Received revision: 17 February 1997 / Accepted: 22 February 1997     

Testing addition of <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> HYK0210-SK09 to mitigate blooms of the diatom <Emphasis Type="Italic">Stephanodiscus hantzschii</Emphasis> in small- and large-scale mesocosms

An algicidal bacterium Pseudomonas fluorescens HYK0210-SK09 (SK09) was applied to a natural bloom of Stephanodiscus hantzschii using a small-scale mesocosm (SM) and a large-scale mesocosm (LM) to clarify the algicidal effects and evaluate the response of the planktonic community and environments. When SK09 cells were inoculated at a final concentration of 5 × 10⁶ cells mL⁻¹, the abundance of S. hantzschii decreased significantly by 95% in SM and 85% in LM. The microcosm in the laboratory revealed that the abundance of Pseudomonas increased rapidly after inoculation with a corresponding decrease in the S. hantzschii population. Nutrient concentrations increased following the decline in the diatom cells. The abundances of nondominant species such as Chlamydomonas, Cryptomonas, and Navicula increased slightly with increased nutrient concentrations. The abundance of heterotrophic protists also increased significantly due to utilization of SK09 as food. The present study demonstrates that SK09 is an effective biocontrol agent for natural S. hantzschii bloom, and grazing pressure plays a crucial role in the successful application of algicidal bacteria to natural environments.     

Differences among plant species in cuticular permeabilities and solute mobilities are not caused by differential size selectivities

Solute mobilities in cuticular membranes of six species (Hedera helix, Malus domestica, Populus alba, Pyrus communis, Stephanotis floribunda, Strophantus gratus) were measured using plant hormones, growth regulators and other organic model compounds varying in molar volumes from 99 to 349 mL · mol⁻¹ The dependence of mobilities (k*) on molar volume (V _x ) was exponential and could be described with equations of the type log k*=log k*⁰−^′ V _x . The y-intercepts (log k*⁰) represent mobilities of a hypothetical solute of zero molar volume. The parameter β′ is a measure of size selectivity of cuticular membranes and no differences among the six species were observed. At 25 °C the average β′ was 0.0095 mol · mL⁻¹. Solute mobility decreased by about a factor of 8.9 when molar volume increased by 100 mL · mol⁻¹ and the mobility of a compound with V _x  = 100 mL · mol⁻¹ was about 700-fold higher than the mobility of a compound with V _x  = 400 mL · mol⁻¹. Size selectivity decreased with increasing temperatures and for Strophantusβ′-values of 1.6 × 10⁻² to 8.0 × 10^-4 mol · mL⁻¹ were obtained for 10 and 30 °C, respectively. The-intercepts (log k*⁰) differed among plant species by 3 orders of magnitude and since size selectivity was the same for all species, solute mobilities for solutes having zero molar volumes were the sole cause for differences among species in solute mobilities and permeabilities. We argue that these differences in k*⁰ are related to tortuosity of the diffusion path. These results were used to derive an equation which predicts rates of cuticular penetration on the basis of k*⁰, the average size selectivity of 9.5 × 10⁻³ mol · mL⁻¹ and the driving forces of penetration. Received: 25 November 1997 / Accepted: 9 March 1998     

Studies on water transport through the sweet cherry fruit surface: characterizing conductance of the cuticular membrane using pericarp segments

Water conductance of the cuticular membrane (CM) of mature sweet cherry fruit (Prunus avium L. cv. Sam) was investigated by monitoring water loss from segments of the outer pericarp excised from the cheek of the fruit. Segments consisted of epidermis, hypodermis and several cell layers of the mesocarp. Segments were mounted in stainless-steel diffusion cells with the mesocarp surface in contact with water, while the outer cuticular surface was exposed to dry silica (22 ± 1 °C). Conductance was calculated by dividing the amount of water transpired per unit area and time by the difference in water vapour concentration across the segment. Conductance values had a log normal distribution with a median of 1.15 × 10⁻⁴ m s⁻¹ (n=357). Transpiration increased linearly with time. Conductance remained constant and was not affected by metabolic inhibitors (1 mM NaN₃ or 0.1 mM carbonylcyanide m-chlorophenylhydrazone) or thickness of segments (range 0.8–2.8 mm). Storing fruit (up to 42 d, 1 °C) used as a source of segments had no consistent effect on conductance. Conductance of the CM increased from cheek (1.16 ± 0.10 × 10⁻⁴ m s⁻¹) to ventral suture (1.32 ± 0.07 × 10⁻⁴ m s⁻¹) and to stylar end (2.53 ± 0.17 × 10⁻⁴ m s⁻¹). There was a positive relationship (r²=0.066**; n=108) between conductance and stomatal density. From this relationship the cuticular conductance of a hypothetical astomatous CM was estimated to be 0.97 ± 0.09 × 10⁻⁴ m s⁻¹. Removal of epicuticular wax by stripping with cellulose acetate or extracting epicuticular plus cuticular wax by dipping in CHCl₃/methanol increased conductance 3.6- and 48.6-fold, respectively. Water fluxes increased with increasing temperature (range 10–39 °C) and energies of activation, calculated for the temperature range from 10 to 30 °C, were 64.8 ± 5.8 and 22.2 ± 5.0 kJ mol⁻¹ for flux and vapour-concentration-based conductance, respectively. Received: 23 March 2000 / Accepted: 28 July 2000     

Enumeration of bacteria from a Trichodesmium spp. bloom of the Eastern Arabian Sea: elucidation of their possible role in biogeochemistry

The carbon-flux via algal bloom events involves bacteria as an important mediator. The present study, carried out during the spring inter-monsoon month of April 2008 onboard CRV Sagar Manjusha-06 in the Eastern Arabian Sea, addresses the bloom-specific flow of carbon to bacteria via chromophoric dissolved organic matter (CDOM). Eleven stations monitored were located in the coastal, shelf and open-ocean areas off Ratnagiri (16°59′N, 73°17′E), Goa (15°30′N, 73°48′E) and Bhatkal (13°58′N, 74°33′E) coasts. Visible bloom of “saw-dust” color in the Ratnagiri shelf were microscopically examined and the presence of cyanobacteria Trichodesmium erythraeum and T. thieabautii with cell concentrations as high as 3.05 × 10⁶ trichomes L⁻¹ was recorded. Total bacterial counts (TBC) varied between 94.09 × 10⁸ cells L⁻¹ in the bloom to 1.34 × 10⁸ cells L⁻¹ in the non-bloom area. Chromophoric dissolved organic matter (CDOM) concentrations averaged 2.27 ± 3.02 m⁻¹ (absorption coefficient 325 nm) in the bloom to 0.28 ± 0.07 m⁻¹ in the non-bloom waters respectively. CDOM composition varied from a higher molecular size with lower aromaticity in the bloom to lower molecular size and increased aromaticity in the non-bloom areas respectively. Strong positive relationship of TBC with Chlorophyll a (R ² = 0.65, p < 0.01) and CDOM concentrations (R ² = 0.8373, p = 0.01) in the bloom area indicated hydrolysis and/or uptake of CDOM by bacteria. Absorption by mycosporine-like amino acid palythene (λ _max = 360 nm) was recorded in the filtrate of bloom. Morphotypes of Trichodesmium-associated bacteria revealed a higher frequency of Gram-positive rods. The role of bacteria in relation to changing CDOM nature and as a factor in affecting oxygen content of the water column is discussed in context of the Arabian Sea.     

Characterization of the superoxide dismutase SOD1 gene of Kluyveromyces marxianus L3 and improved production of SOD activity

Superoxide dismutase (SOD) activity is one major defense line against oxidative stress for all of the aerobic organisms, and industrial production of this enzyme is highly demanded. The Cu/Zn superoxide dismutase gene (KmSOD1) of Kluyveromyces marxianus L3 was cloned and characterized. The deduced KmSod1p protein shares 86% and 71% of identity with Kluyveromyces lactis and Saccharomyces cerevisiae Sod1p, respectively. The characteristic motifs and the amino acid residues involved in coordinating copper and zinc and in enzymatic function were conserved. To the aim of developing a microbial production of Cu/Zn superoxide dismutase, we engineered the K. marxianus L3 strain with the multicopy plasmid YG-KmSOD1 harboring the KmSOD1 gene. The production of KmSOD1p in K. marxianus L3 and K. marxianus L3 (pYG-KmSOD1) in response to different compositions of the culture medium was evaluated. The highest specific activity (472 U_SOD mg_prot ⁻¹) and the highest volumetric yield (8.8 × 10⁵ U_SOD l⁻¹) were obtained by the recombinant strain overexpressing KmSOD1 in the presence of Cu²⁺ and Zn²⁺ supplements to the culture media. The best performing culture conditions were positively applied to a laboratory scale fed-batch process reaching a volumetric yield of 1.4 × 10⁶ U_SOD l⁻¹. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.