Isolation and characterization of a plaque-forming lambda bacteriophage carrying a ColE1 plasmid

A plaque-forming lambdaimm434 bacteriophage carrying the entire genome of colicinogenic factor E1 has been isolated and characterized. This phage, lambdaimm434ColE1, can lysogenize as a stable plasmid within a recombination-deficient Escherichia coli cell that lacks the normal attachment site for lambda phage. Furthermore, it has been found that lambdaimm434ColE1 phage carrying amber mutations in the O and P genes of the lambda genome, i.e., lambdaimm434OamPamColE1, behaves as a plaque-forming phage, and this finding suggests that the ColE1 factor DNA permits replication of the DNA of the plaque-forming phage.     

Spontaneous transposition in the bacteriophage lambda cro gene residing on a plasmid.

A new mutagenesis assay system based on the phage lambda cro repressor gene residing on a plasmid was developed. The assay detects mutations in cro that decrease the binding of the repressor to the OR operator in an OR PR-lacZ fusion present in a lambda prophage. Mutations arose spontaneously during growth of E. coli cells harboring cro plasmids at a frequency of 3-6 x 10(-6). Analysis of some 200 cro mutants from several 'wild-type' strains revealed a substantial fraction of 25-70% insertion events caused by transposition of IS elements. Most of the insertions were caused by IS1, but IS5 insertions were observed too. In strains harboring Tn10, IS10 was responsible for most insertions. Restriction nuclease digestion analysis revealed a preference for insertion of IS10 into the C-terminal half of cro, despite the absence of sequences which are known hot spots for Tn10 insertions. The frequency of IS1 insertions into cro decreased 25-60-fold and that of IS10 insertions decreased 200-fold in cells carrying the recA56 mutation, suggesting that RecA is involved in transposition of these elements. During the logarithmic phase of growth, the mutation frequency was constant for at least 22 generations; however, upon continuous incubation at the stationary phase, the mutation frequency gradually increased, yielding a 3-fold increase in the frequency of insertion and a 4-5-fold increase in point mutation. Genomic Southern analysis of chromosomal IS elements in cells which underwent a transposition from the chromosome into the cro plasmid revealed that the number and distribution of IS1 and IS5 were usually unaltered compared to cells which did not undergo a transposition event. In contrast, essentially each IS10 transposition was accompanied by multiple events which led to changes in the number and distribution of chromosomal IS10 elements.     

Isolation of a lambda transducing bacteriophage carrying the relA gene of Escherichia coli.

In Escherichia coli the relA and pyrG loci are 99% cotransducible. On the basis of this knowledge, we have isolated lambdacI857S7dpyrG transducing bacteriophages carrying both the pyrG and relA genes. Single lysogens of this bacteriophage show basal levels of ppGpp that are 10-fold higher than normal. Stringent factor is present among the gene products synthesized by lambdadpyrG relA after infection of ultraviolet-killed cells, as analyzed by polyacrylamide gel electrophoresis. The intracellular content of stringent factor, as determined by enzymatic activity, rises 20-fold after induction of a single lysogen of lambdadpyrG relA. As measured by two-dimensional gel electrophoresis, the amount of stringent factor in an exponentially growing strain carrying a pyrG relA plasmid is at least 10-fold greater than in a normal strain. These data constitute strong evidence that stringent factor is the relA gene product.     

Construction of plasmid cloning vehicles that promote gene expression from the bacteriophage lambda pL promoter.

Two multiple-copy, ColE1-type, plasmid cloning vehicles, pHUB2 and pHUB4, have been constructed that carry four different single restriction sites down-stream from the phage lambda promoter pL. The promoting activity of pL is switched off at low temperature in the presence of a cIts gene that specifies a temperature-sensitive repressor but could be activated by heat induction. cIts was located either on the host chromosome, or on a second plasmid pRK248 that is compatible with the cloning vehicle, or on the vehicle itself. Three different restriction fragments, each carrying the gene trpA of Salmonella typhimurium or Shigella dysenteriae, have been inserted into the EcoRI, BamHI and SalI sites, respectively, of these plasmids and pL dependent expression of the inserted gene in Escherichia coli was determined by measuring the enzymatic activity of the trpA gene product. Heat induction resulted in a level of expression of trpA corresponding to 1 to 6.6% of the total soluble cell protein as trpA protein. The level of trpA protein production depended on the particular insert and the plasmid used.     

Construction of recombinant plasmid carrying the lambda DNA fragment responsible for prophage integration.

The recombinant DNA molecules were constructed from plasmid RSF2124 and the EcoRI fragment of lambda DNA containing the genes responsible for prophage integration. The presence of these genes in recombinant plasmids was detected genetically. lambda int-gene was shown to be expressed in either orientation of insertion in the plasmid. We found that recombinant plasmid was able to integrate into chromosome of lambda lysogens. The integration of plasmid into host chromosome was demonstrated by contransduction of chromosome and plasmid markers using generalized transducer P1 and by specialized transduction with lambda phages.     

Formation of oligomeric structures from plasmid DNA carrying cos lambda that is packaged into bacteriophage lambda heads.

Plasmids that carry cos lambda, the region necessary for lambda phage packaging and that are as small as four kilobases in size can be packaged into lambda phage heads in head-to-tail tandem oligomeric structures. Multimeric oligomers as large as undecamers have been detected. Oligomer formation depends upon the products of red and gam of lambda, and the general recombination occurs between different plasmids that share homologous DNA regions. The packaging efficiency of plasmids depends on its copy number in cells and its genome size. Upon injection into a cell, the DNA establishes itself as a plasmid in a tandem structure. When such a plasmid in a high oligomeric structure is used as the source of packaging DNA, the packaging efficiency of the plasmids is elevated. The oligomers are stable in recA cells, whereas they drift toward lower oligomers in recA+ cells.     

DNA rearrangements in a hybrid plasmid carrying the redB imm region of coliphage lambda

The hybrid plasmid consisting of pSC101 and the redB--N--imm region of phage lambda cI857 persists in cells grown at 30 degrees C but not in cells grown at 37 degrees C. In the latter case the plasmid was found to undergo several modifications. Restriction maps of these new plasmids indicate the following modifications: (1) the insertion of an IS1 element into gene N carried by the lambda fragment; (2) a mutation in the pL oL site of the same fragment, and (3) four large deletions (30 to 50% of the hybrid plasmid) which remove almost the entire lambda fragment. For the latter deletions, one endpoint seems to be fixed in the same restriction fragment of pSC101 while the other endpoint assumes four different positions on the lambda fragment; this might suggest a site-specific recombination event.     

C1 and cro repressors of lambda phages. I. Construction of vectors for expression of cro repressor of bacteriophage lambda imm434

Eight derivatives of recombinant plasmid pBRcro434, that consists of pBR322 and fragment of immunity region of phage lambda imm434 have been constructed and characterised. These derivatives contain the deletions in the region adjacent to OR3 operator and in the structural gene of cro-repressor of lambda imm434. The deletions have been produced by the treatment of pBRcro434 with exonuclease III of Escherichia coli and S1 nuclease of Aspergillus orizae and precisely mapped. The unique EcoRI-restriction sites have been reconstructed with the aim of using this deletion plasmids as a vectors for cloning.     

Gamma-T4 hybrid bacteriophage carrying the thymidine kinase gene of bacteriophage T4.

Among 32 lambda-T4 recombinant phages selected for growth on a thymidylate synthetase-deficient (thyA) host, 2 were shown to carry the T4 thymidine kinase (tk) gene. The lambda-T4tk phages contain two T4 HindIII DNA fragments (2.0 and 1.5 kilobases) that hybridize to restriction fragments of T4 DNA, encompassing the tk locus at 60 kilobases on the T4 map. The T4tk insert compensates for the simultaneous host deficiencies of thymidine kinase and thymidylate synthetase in a thymidine kinase-deficient (tdk) host growing in the presence of fluorodeoxyuridine when provided with thymidine and uridine. The lambda-T4tk hybrid phages specified five polypeptides with Mrs of 22,000 (22K), 21K, 14K, 11K, and 9K.     

Correlation between UV dose requirement for lambda bacteriophage induction and lambda repressor concentration.

Escherichia coli K-12 wild type and a uvrA mutant derivative were used to construct isogenic strains bearing one, two, three, or more phage lambda cI genomes and containing increasing concentration of lambda repressor as measured by in vitro operator DNA-binding assays. The survival and phage induction in response to UV irradiation were determined. In both strains, dose-response relationships were obtained as a function of the cellular repressor concentration. The uvrA lysogens required one-tenth the UV fluence of the wild-type counterparts for induction. Lysogenic strains containing plasmids that overproduce the lambdaind+ repressor and the same lysogens with plasmids overproducing the lambdaind- repressor displayed the same survival curves as the nonlysogenic parental strain; however, only the former produced infectious centers (at a frequency of 2 x 10(-3) to 5 x 10(-4) in response to radiation.     

Plaque assay for lambda transducing phage carrying the E. coli metB gene

A halo plaque assay has been developed for the detection of nondefective lambda transducing phage carrying functional alleles of the metB gene of Escherichia coli K12. The assay is based upon the production of phage plaques on lawns of metB- bacterial cells which are supplemented with limiting amounts of methionine and upon the subsequent transduction of methionine-starved cells in the lawn surrounding the plaques. The resulting prototrophic transductants give rise to a halo of bacterial growth surrounding the plaque. A precise genotype can be ascribed to the characteristic morphologies of selected haloes. This technique has general application for all biosynthetic markers.     

Analysis of chromosome mobilization using hybrids between plasmid RP4 and a fragment of bacteriophage lambda carrying IS1

In vitro recombination was used to generate RP4 plasmids with an inserted restriction fragment of bateriophage λ. In some cases the λ DNA also carried the insertion sequence IS1. Comparisons were made between the abilities of these plasmids to mobilize the Escherichia coli K-12 chromosome in different genetic backgrounds. RP4-borne IS1 acting alone promoted chromosome transfer but with an efficiency 1% of that resulting from more extensive plasmid-chromosome homology. A recA mutation in the donor depressed the mobilization frequency below the level of detection. Correlation of the direction of chromosome transfer and the orientation of the cloned λ DNA allowed the direction of RP4 transfer to be determined. Studies on recombinants showed that in general they also acquired an intact, autonomous plasmid, suggesting the process of mobilization by RP4 may differ in certain features from chromosome transfer by F.     

Structure and function of the repressor of bacteriophage lambda

Summary The high-affinity mutant cI gene of cIha (Nag et al. 1984) was cloned in the multicopy plasmid pBR322. In the resulting plasmid, pMD 102, a lacUV5 promoter was inserted giving the lacUV5-cIha fusion plasmid pMD 205. Bacteria carrying pMD 102 and pMD 205 contain 2.5 and 15 times, respectively, the level of repressor in a monolysogen of cIha. Results of the study of certain properties of the bacteria carrying these plasmids suggest that the ha repressor also has a higher affinity for the virulent mutant operators as well as the prm promoter of .     

Structure and function of the repressor of bacteriophage lambda

Summary By mutagenizing a cIts (cI857) lysogen, a mutant has been isolated with a wild-type phenotype. This mutant phage lysogenizes with low efficiency and produces a low burst. Though the initial rates of repressor synthesis in Escherichia coli after infection with wild-type and mutant are the same, the maximum level of repressor that is synthesized in the latter case is only about 30% of that synthesized in the former. Virulent plates on the lysogen of mutant with slightly less efficiency producing very tiny plaques. Operator-binding studies made in vitro with purified mutant and wild-type repressors show that the binding curve of the former repressor is a rectangular hyperbola while that of the latter is sigmoid. The half-lives of the complexes of mutant and wild-type repressors with right operator are 133 and 27 min, respectively. All these results suggest that the mutant repressor possibly has a higher affinity for the operators. This mutant has been named cIha (ha=high affinity).     

Mutations in bacteriophage lambda repressor that prevent RecA-mediated cleavage.

In this paper, we report on the isolation and sequence analysis of mutations that confer an induction-deficient phenotype to lambda repressor. A total of 16 different mutations, which occur at 13 different sites in the repressor gene, have been characterized. For most of the mutant lysogens, frequencies of spontaneous induction in a recA+ strain were reduced dramatically in comparison with those for a wild-type phage, and these mutant lysogens showed little or no prophage induction after UV irradiation. The immunity properties of cells containing the mutant repressors show that all of the mutants but one exhibit operator-binding properties indistinguishable from wild-type repressor.