玉米隐性核不育双杂合保持系的选育:Ⅱ.提高保持系生活力的研究

试验采用两种方案选育不同自交系背景的隐性核不育双杂合保持系。不同保持系在成株率、双杂合体比例、花粉败育率等特性上有明显差异,表明不同自交系对染色体重复缺失承受力的差异,将双杂合结构转育到更多自交系背景中,有可能筛选出农艺性状优良、生活力强的保持系。通过同一自交系双杂合体互交或不同自交系双杂合体杂交,改良保持系农艺性状已初见成效。 ms~2|双杂合保持系保持雄性不育株率99.72%,符合生产杂交种子的要求。文章还讨论了两种选育方案的效果和保持系的应用前景。 Abstract:Recessive enic male-sterile double heterozygous maintainers in various inbred line backgrounds were eveloped using two different breeding procedures.The maintainers showed significantly differences in plant viability percentage,double heterozygote percentage,abortive pollen percentage and other traits.This implied different tolerances of various inbred lines to Dp-Df chromosome complement.Maintainers possessing good viability can be selected when double heterozygous constitution was transferred to more inbred lines.The agronomic traits and viability was improved by sibcrossing among double heterozygotes with the same inbred line background or crossing among different double heterozygotes.The maintainers could maintain 99.72% progeny plants to be male-sterile,this satisfies essential reguirement for production of commercial hybrid corn.The merits and demerits of two approaches for breeding double heterozygous maintainers and the applied prospect of maintainers are discussed.     

Heterozygosity of Knob-Associated Tandem Repeats and Knob Instability in Mitotic Chromosomes of Zea （Zea mays L. and Z. diploperennis Iltis Doebley）

Knobs are blocks of heterochromatin present on chromosomes of maize （Zea mays L.） and its relatives that have effects on the frequency of genetic recombination, as well as on chromosome behavior. Knob heterozygosity and instability in six maize inbred lines and one Z. diploperennis Iltis Doebley line were investigated using the fluorescence in situ hybridization （FISH） technique with knob-associated tandem repeats （180 bp and 350 bp （TR- 1）） as probes. Signals of seven heterozygous knobs containing 180- bp repeats and of one heterozygous knob containing TR- 1 were captured in chromosomes of all materials tested according to the results of FISH, which demonstrates that the 180-bp repeat is the main contributor to knob heterozygosity compared with the TR- 1 element. In addition, one target cell with two TR- 1 signals on one homolog of chromosome 2L, which was different from the normal cells in the maize inbred line GB57, was observed, suggesting knob duplication and an instability phenomenon in the maize genome.     

The breeding of two polyploid rice lines with the characteristic of polyploid meiosis stability

Polyploidization is a basic feature of plant evolution. Nearly all of the main food, cotton and oil crops are polyploid. When ploidy levels increase, yields double; this phenomenon suggested a new strategy of rice breeding that utilizes wide crosses and polyploidization dual advantages to breed super rice. Because low seed set rates in polyploid rice usually makes it difficult to breed, the selection of Ph-liked gene lines was emphasized. After progenies of indica-japonica were identified and selected, two poly- ploid lines, PMeS-1 and PMeS-2 with Polyploid Meiosis Stability (PMeS) genes were bred. The proce- dure included seven steps: selecting parents, crossing or multiple crossing, back-crossing, doubling chromosomes, identifying the polyploid, and choosing plants with high seed set rates that can breed themselves into stable lines. The characteristics of PMeS were determined by observing meiotic be- haviors and by cross-identification of seed sets. PMeS-1 and PMeS-2, (japonica rice), have several characteristics different from other polyploid rice lines, including a higher rate of seed set (more than 65%, increasing to more than 70% in their F1 offspring); and stable meiotic behaviors (pairing with bi- valents and quarivalents nearly without over-quarivalent in prophase, nearly without lagging chromo- somes in metaphase and without micronuclei in anaphase and telophase). The latter was obviously different from control polyploid line Dure-4X, which displayed abnormal meiotic behaviors including a higher rate of multivalents, univalents and trivalents in prophase, lagging chromosomes in metaphase and micronuclei in anaphase and telophase. There were also three differences of the breeding method between PMeS lines and normal diploid lines: chromosomes doubling, polyploidism identifying and higher seed set testing. The selection of PMeS lines is the first step in polyploid rice breeding; their use will advance the progress of polyploid rice breeding, which will in turn offer a new way to breed super rice.     

Linkage Map Construction and Quantitative Trait Loci Analysis for Bolting Based on a Double Haploid Population of Brassica rapa

Early bolting of Chinese cabbage （Brassica rapa L.） during spring cultivation often has detrimental effects on the yield and quality of the harvested products. Breeding late bolting varieties is a major objective of Chinese cabbage breeding programs. In order to analyze the genetic basis of bolting traits, a genetic map of B. rapa was constructed based on amplified fragment-length poiymorphism （AFLP）, sequence-related amplified poiymorphism （SRAP）, simple sequence repeat （SSR）, random amplification of polymorphic DNA （RAPD）, and isozyme markers. Marker analysis was carried out on 81 double haploid （DH） lines obtained by microspore culture from F1 progeny of two homozygous parents： B. rapa L. ssp. pekinensis （BY） （an extra-early bolting Chinese cabbage line） and B. rapa L. ssp. rapifera （MM） （an extra-late bolting European turnip line）. A total of 326 markers including 130 AFLPs, 123 SRAPs, 16 SSRs, 43 RAPDs and 14 isozymes were used to construct a linkage map with 10 linkage groups covering 882 cM with an average distance of 2.71 cM between loci. The bolting trait of each DH line was evaluated by the bolting index under controlled conditions. Quantitative trait loci （QTL） analysis was conducted using multiple QTL model mapping with MapQTL5.0 software. Eight QTLs controlling bolting resistance were identified. These QTLs, accounting for 14.1% to 25.2% of the phenotypic variation with positive additive effects, were distributed into three linkage groups. These results provide useful information for molecular marker-assisted selection of late bolting traits in Chinese cabbage breeding programs.     

LSCHL4 from Japonica Cultivar,Which Is Allelic to NAL 1, Increases Yield of Indica Super Rice 93-11

The basic premise of high yield in rice is to improve leaf photosynthetic efficiency and coordinate the sourcesink relationship in rice plants. Quantitative trait loci （QTLs） related to morphological traits and chlorophyll content of rice leaves were detected at the stages of heading to maturity, and a major QTL （qLSCHL4） related to flag leaf shape and chlorophyll content was detected at both stages in recombinant inbred lines constructed using the indica rice cultivar 93-11 and the japonica rice cultivar Nipponbare. Map-based cloning and expression analysis showed that LSCHL4 is allelic to NAL1, a gene previously reported in narrow leaf mutant of rice. Overexpression lines transformed with vector carrying LSCHL4 from Nipponbare and a near-isogenic line of 93-11 （NIL-9311） had significantly increased leaf chlorophyll content, enlarged flag leaf size, and improved panicle type. The average yield of NIL-9311 was 18.70% higher than that of 93-11. These results indicate that LSCHL4 had a pleiotropic function. Exploring and pyramiding more high-yield alleles resem- bling LSCHL4 for super rice breeding provides an effective way to achieve new breakthroughs in raising rice yield and generate new ideas for solving the problem of global food safety.     

Analysis of DNA methylation in different maize tissues

DNA methylation plays an important role in gene expression regulation during biological development and tissue differentiation in plants. This study adopted methylation-sensitive Amplified fragment length polymorphism （AFLP） to compare the levels of DNA cytosine methylation at CCGG sites in tassel, bracteal leaf, and ear leaf from maize inbred lines, 18 White and 18 Red, respectively, and also examined specific methylation patterns of the three tissues. Significant differences in cytosine methylation level among the three tissues and the same changing tendency in two inbred lines were detected. Both MSAP （methylation sensitive amplification polymorphism） ratio and full methylation level were the highest in bracteal leaf, and the lowest in tassel. Meanwhile, different methylation levels were observed in the same tissue from the inbred lines, 18 White and 18 Red. Full methylation of internal cytosine was the dominant type in the maize genome. The differential methylation patterns in the three tissues were observed. In addition, sequencing of nine differentially methylated fragments and the subsequent blast search revealed that the cytosine methylated 5 ＇ -CCGG-3 ＇ sequences were distributed in repeating sequences, in the coding and noncoding regions. Southern hybridization was used to verify the methylation polymorphism. These results clearly demonstrated the power of the MSAP technique for large-scale DNA methylation detection in the maize genome, and the complexity of DNA methylation change during plant growth and development. The different methylation levels may be related to specific gene expression in various tissues.     

Assessing the Suitability of Various Physiological Traits to Screen Wheat Genotypes for Salt Tolerance

Success of improving the salt tolerance of genotypes requires effective and reliable screening traits in breeding programs. The objective was to assess the suitability of various physiological traits to screen wheat genotypes for salt tolerance. Thirteen wheat genotypes from Egypt, Germany, Australia and India were grown in soil with two salinity levels （control and 150 mmol/L NaCI） in a greenhouse. The physiological traits （ion contents in leaves and stems, i.e. Na^＋, Cl^-, K^＋, Ca^2＋）, the ratios of K^＋/Na^＋ and Ca^＋/Na^＋ in the leaves and stems, net photosynthesis rate, stomatal conductance, transpiration rate, chlorophyll content （SPAD value）, and leaf water relations, were measured at different growth stages. The physiological traits except for Na^＋ and Cl^- in stems and the leaf transpiration rate at 150 mmol/L NaCI showed a significant genotypic variation, indicating that the traits that have a significant genotypic variation may be possibly used as screening criteria. According to the analysis of linear regression of the scores of the physiological traits against those of grain yield, however, the physiological traits of Ca^2＋ and Ca2^＋/Na^＋ at 45 d and final harvest with the greatest genotypic variation were ranked at the top. From a practical and economic point of view, SPAD value should be considered to be used as screening criteria and/or there is a need to develop a quick and practical approach to determine Ca^2＋ in plant tissues.     

Alien DNA introgression and wheat DNA rearrangements in a stable wheat line derived from the early generation of distant hybridization

In general, it requires five or more generations to develop a stable line by the traditional breeding method of cultivar hybrids in self-pollinated crops, such as wheat, barley, and rice. No doubt, the breeding period will be shortened and thus the breeding effi-ciency will be improved if the hybrids can stabilize in early generation. The method of haploid breeding, that is, obtaining stable pure lines (DH lines) of cultivar hybrids with the aid of anther culture and then chro-mosome doubling,…     

Development of the “Third-Generation” Hybrid Rice in China

Rice is a major cereal crop for China. The development of the ‘‘three-line" hybrid rice system based on cytoplasmic male sterility in the 1970 s(first-generation) and the ‘‘two-line" hybrid rice system based on photoperiod-and thermo-sensitive genic male-sterile lines(second-generation)in the 1980 s has contributed significantly to rice yield increase and food security in China. Here we describe the development and implementation of the ‘‘third-generation" hybrid rice breeding system that is based on a transgenic approach to propagate and utilize stable recessive nuclear male sterile lines, and as such, the male sterile line and hybrid rice produced using such a system is nontransgenic. Such a system should overcome the intrinsic problems of the ‘‘first-generation" and‘‘second-generation" hybrid rice systems and hold great promise to further boost production of hybrid rice and other crops.     

Yield-related QTLs and Their Applications in Rice Genetic Improvement

Grain yield is one of the most important indexes in rice breeding,which is governed by quantitative trait loci (QTLs).Different map-ping populations have been used to explore the QTLs controlling yield related traits.Primary populations such as F 2 and recombi-nant inbred line populations have been widely used to discover QTLs in rice genome-wide,with hundreds of yield-related QTLs detected.Advanced populations such as near isogenic lines (NILs) are efficient to further fine-map and clone target QTLs.NILs for primarily identified QTLs have been proposed and confirmed to be the ideal population for map-based cloning.To date,20 QTLs directly affecting rice grain yield and its components have been cloned with NIL-F 2 populations,and 14 new grain yield QTLs have been validated in the NILs.The molecular mechanisms of a continuously increasing number of genes are being unveiled,which aids in the understanding of the formation of grain yield.Favorable alleles for rice breeding have been ’mined’ from natural cultivars and wild rice by association analysis of known functional genes with target trait performance.Reasonable combination of favorable alleles has the potential to increase grain yield via use of functional marker assisted selection.     

Cytologic Observations on the Double Fertilization in Maize

1.The double fertilization is the type of the premitotic syngamy. 2. In 21 to 24 hours after pollination, most of the female nuclei fuse with the male nuclei. When the female nucleus fuses with the male nucleus, there are two situations in the appearance of the male nucleolus: one is that while the chromatin of the sperm nucleus relaxes gradually, a male nucleolus appears; the other is that after the chromatin of the sperm nucleus relaxes gradually, the male nucleus just appears in about 2 to 4 hours. 3. Generally, the fusion of the female nucleolus with the male nucleolus takes place before the division of the nygote. The nygote enters the stage of division when it has a jarge nucieojus; the zygote, in which the female nucleoius does not fuse with the male nucleolus, also can enter the stage of division. In 30 to 33 hours after pollination, the first division of the zygote occurs. The resting period of the zygote is about 9 hours 4. In the primary endosperm nucleus, the female nucleolus does not fuse with the male nucleolus. 24 to 26 hours after pollination, the primary endosperm nucleus begins the first division. The resting period of the primary endosperm nucleus is 2 to 4 hours. 5. Under the condition of artificial pollination, the fertilization of the fruit ears of maize proceeds sequencely, i.e. from the upper of the fruit ears to the lower the fertilization is fulfilled gradually.     

玉米双受精过程的细胞学观察

1.玉米双受精属于有丝分裂前配子融合的类型。2.授粉后21至24小时,大部分雌、雄性核发生融合。雌、雄性核融合时,雄性核仁的出现存在两种情况,其一是精核染色质逐渐分散的同时出现雄性核仁,其二是精核染色质逐渐分散后,约经2至4小时才出现雄性核仁。3.合子内的雌、雄性核仁若发生融合,一般在合子分裂前进行。合子以一个大核仁的形式进入分裂期;雌、雄性核仁不融合的合子同样可以进入分裂期。授粉后30至33小时,合子进行第一次分裂。合子静止期大约为9小时左右。4.初生胚乳核内的雌、雄性核仁不发生融合。授粉后24至26小时,初生胚乳核进行第一次分裂。初生胚乳核的静止期为2—4小时。5.人工授粉条件下,玉米果穗受精过程的进行有一定的顺序;即自果穗上部逐渐向下部完成受精作用。     

罗汉果双受精过程的细胞学观察

罗汉果（Ｓｉｒａｉｔｉａｇｒｏｓｖｅｎｏｒｉ（Ｓｗｉｎｇｌｅ）Ｃ．Ｊｅｍｅｙ）双受精过程属有丝分裂前配子融合类型,授粉后２４～４８ｈ,花粉管进入胚囊,穿过一个助细胞,放出两个精子。雌雄核融合和雄核与次生核融合同时发生在授粉后６２～７２,雄核与次生核融合速度快于配子融合,７２ｈ后即可见到初生胚乳核分裂。合子中的雌雄核仁在授粉后第５～６ｄ融合,授粉后８～９ｄ合成分裂形成二细胞胚。在双受精过程中,多次观察到有多条花粉管进入胚囊和多精入极核现象。原胚期有附加花粉管从珠孔进入。     

错位双链核糖核酸的热原反应

由于错位dsRNA的毒副作用得到降低,因此是一类很有潜力的抗病毒、抗肿瘤物质。研究中利用家兔实验评价了PolyI:C和PolyI:C12U引起的热原反应。在10mgml、1mgml、005mgml剂量水平PolyI:C12U均未产生发热和其他毒副作用,而PolyI:C实验组均有发热现象,甚至有家兔死亡。     

Estimation of Prevalence and Relative Risk in Repetitive Surveys

The Theory of double sampling as proposed by Neyman (1938) and subsequently used for successive sampling by Jesson (1942), Yates (1960), Patterson (1950), Eckler (1955), Kuldroff (1963) and Tikkiwal (1960, 1967) has been explored to develop a general estimator which can be used for estimation of parameters such as mean, ratio or double ratio. A simple case of sampling on two occasions has only been considered but the logic can easily be extended for more than two occasions. The results show that the generalised estimator will be very useful for the applied statisticians.     

Observations on Fertilization in Sugar Beet

The whole process of double fertilization in sugar beet has been observed, the main results are as follows: About 2 hours after pollination, the pollen grains germinate, the sperms in the pollen tube are long-oval. 15 hours after pollination, the pollen tube destroys a synergid and releases two sperms on one side or at the chalazal end of the egg cell. The sperms are spherical each having a cytoplasmic sheath. 17 hours after pollination, one sperm enters the egg cell, and the sperm nucleus fuses with the egg nucleus rapidly. 21 hours after pollination, the zygote is formed. In the meantime, the primary endosperm nucleus has divided into two free endosperm nuclei. 25 hours after pollination, the zygote begins to divide, forming a two-celled proembryo. The dormancy stage of the zygote is about 4 hours. In the meantime the endosperm is at the stage of four free nuclei. 17 hours after pollination, the sperm nucleus comes into contact and fuses with the secondary nucleus. The sperm nucleus fuses with the secondary nucleus, faster than the sperm with the egg. he first division of the primary endosperm nucleus is earlier than that of the zygote, it takes place about 20 hours after pollination, the dormancy stage of the primary endosperm is about 2 hours. The endosperm is free nuclear. The fertilization of sugar beet belongs to premitotic type of syngamy. From the stage of zygote to the two-celled proembryo, it can be seen that addition- al sperms enter the embryo sac, but polyspermy has not been observed yet.     

运用双重组合设计建立黑龙江省玉米降水产量模型

本文运用旋转设计进一步发展的双重组合试验设计,建立黑龙江省关于降水、有机质、氮、磷、钾肥及有机肥的玉米产量模型,探讨了双重组合试验设计在建模时用可控因素去挂接不可控因素的应用,对模型进行了检验和频数分析,提出玉米产量大子3000公斤的高产在艺措施．     

A Class of Ratio Cum Product-Type Estimator in Double Sampling

A class of ratio cum product-type estimator is proposed in case of double sampling in the present paper. Its bias and variance to the first order of approximation are obtained. For an appropriate weight ‘a’ and a good range of α-values, it is found that the proposed estimator is more efficient than the set of estimator viz., simple mean estimator, usual ratio and product estimators, SRIVASTAVA 's estimator (1967), CHAKARBARTY 's estimator and product-type estimator, which are in fact the particular cases of it. The proposed estimator is as efficient as linear regression estimator in double sampling at optimum value of α.     

糜子双受精过程的细胞学观察

糜子(Panicum miliaceum L.)受精的全过程在开花后3小时内完成。开花后20分钟,花粉管到达珠孔,30分钟进入胚囊并释放精子;雌、雄性核融合发生在开花后30分钟至3小时。精核与卵核和极核融合的过程基本相同,但总是先完成与极核的融合。开花后2小时,初生胚乳核形成,随后立即分裂。开花后3小时,合子形成,此时胚乳含两个游离核。开花后8—10小时,合子进入分裂期。合子的休眠期约5—7小时。受精作用属于有丝分裂前配子融合的类型。