New recombinant Escherichia coli strain tailored for the production of poly(3-hydroxybutyrate) from agroindustrial by-products

A recombinant E. coli strain (K24K) was constructed and evaluated for poly(3-hydroxybutyrate) (PHB) production from whey and corn steep liquor as main carbon and nitrogen sources. This strain bears the pha biosynthetic genes from Azotobacter sp. strain FA8 expressed from a T5 promoter under the control of the lactose operator. K24K does not produce the lactose repressor, ensuring constitutive expression of genes involved in lactose transport and utilization. PHB was efficiently produced by the recombinant strain grown aerobically in fed-batch cultures in a laboratory scale bioreactor on a semisynthetic medium supplemented with the agroindustrial by-products. After 24 h, cells accumulated PHB to 72.9% of their cell dry weight, reaching a volumetric productivity of 2.13 g PHB per liter per hour. Physical analysis of PHB recovered from the recombinants showed that its molecular weight was similar to that of PHB produced by Azotobacter sp. strain FA8 and higher than that of the polymer from Cupriavidus necator and that its glass transition temperature was approximately 20 degrees C higher than those of PHBs from the natural producer strains.     

Optimization of polyhydroxybutyrate production from a wild type and two mutant strains of Rhodobacter sphaeroides using statistical method

Interaction studies using central composite design (CCD) gave the optimum concentrations of acetate at 4 g l(-1) and (NH4)2SO4 at 0.01 g l(-1) with an optimum temperature of 35 degrees C. Rhodobacter sphaeroides N20 gave the highest PHB (7.8 g l(-1)) and biomass (DCW) (8.2 g l(-1)) values compared to the wild type strain and the mutant strain U7. The CCD results predicted that the optimum medium for the mutant strain N20 consisted of 3.90 g l(-1) acetate, 0.01 g l(-1) (NH4)2SO4 at 33.5 degrees C (R2=0.985). Validation of this model by culturing the mutant strain in this optimum medium exhibited similar values of PHB (7.76 g l(-1)), biomass (8.32 g l(-1)) and the PHB content in the cell 93.2% of DCW. Similar amounts of PHB were also obtained in batch fermentations using a 5-l bioreactor. The effect of pH and aeration rate was also studied and the optimum values were found to be pH 7.0 with an aeration rate of 1.0 vvm. Under these optimal conditions, strain N20 produced the highest amount of PHB production (8.76 g l(-1)), PHB content (95.4% of DCW) as well as the product yield (Yp/x) (0.72). These results are the highest values ever obtained from photosynthetic bacteria reported so far.     

New Recombinant Escherichia coli Strain Tailored for the Production of Poly(3-Hydroxybutyrate) from Agroindustrial By-Products

A recombinant E. coli strain (K24K) was constructed and evaluated for poly(3-hydroxybutyrate) (PHB) production from whey and corn steep liquor as main carbon and nitrogen sources. This strain bears the pha biosynthetic genes from Azotobacter sp. strain FA8 expressed from a T5 promoter under the control of the lactose operator. K24K does not produce the lactose repressor, ensuring constitutive expression of genes involved in lactose transport and utilization. PHB was efficiently produced by the recombinant strain grown aerobically in fed-batch cultures in a laboratory scale bioreactor on a semisynthetic medium supplemented with the agroindustrial by-products. After 24 h, cells accumulated PHB to 72.9% of their cell dry weight, reaching a volumetric productivity of 2.13 g PHB per liter per hour. Physical analysis of PHB recovered from the recombinants showed that its molecular weight was similar to that of PHB produced by Azotobacter sp. strain FA8 and higher than that of the polymer from Cupriavidus necator and that its glass transition temperature was approximately 20°C higher than those of PHBs from the natural producer strains.     

Propionic acid production by immobilized cells of a propionate-tolerant strain of Propionibacterium acidipropionici

Cells of the propionate-tolerant strain Propionibacterium acidipropionici P200910, immobilized in calcium alginate beads, were tested for propionic and acetic acid production both in a semidefined laboratory medium and in corn steep liquor in batch, fed-batch, and continuous fermentation. Cell density was about 9.8 × 10⁹ cells/g (wet weight) of beads, and beads were added to the medium at 0.1 g (wet weight) beads/ml. Beads could be reused for several consecutive batch fermentations; propionic acid production in the tenth cycle was about 50%–70% of that in the first cycle. In batch culture complete substrate consumption (glucose in semidefined medium, lactate in corn steep liquor) and maximum acid production were seen within 36 h, and acid yields from the substrate were higher than in free-cell fermentations. Fed-batch fermentations were incubated up to 250 h. Maximum propionic acid concentrations obtained were 45.6 g/l in corn steep liquor and 57 g/l in semidefined medium; this is the highest concentration achieved to date in our laboratory. Maximum acetic acid concentrations were 17 g/l and 12 g/l, respectively. In continuous fermentation of semidefined medium, dilution rates up to 0.31 h^–1 could be used, which gave higher volumetric productivities (0.96 g l^–1 h^–1 for propionic acid and 0.26 g l^–1 h^–1 for acetic acid) than we have obtained with free cells. Corn steep liquor shows promise as an inexpensive medium for production of both acids by immobilized cells of propionibacteria.Journal paper no. J- 15614 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project no. 3122     

Batch and continuous cultures of<Emphasis Type="Italic"> Mannheimia succiniciproducens</Emphasis> MBEL55E for the production of succinic acid from whey and corn steep liquor

Mannheimia succiniciproducens MBEL55E isolated from bovine rumen is able to produce a large amount of succinic acid in a medium containing glucose, peptone, and yeast extract. In order to reduce the cost of the medium, whey and corn steep liquor (CSL) were used as substrates for the production of succinic acid by M. succiniciproducens MBEL55E. Anaerobic batch cultures of M. succiniciproducens MBEL55E in a whey-based medium containing CSL resulted in the production of succinic acid with a yield of 71% and productivity of 1.18 g/l/h, which are similar to those obtained in a whey-based medium containing yeast extract (72% and 1.21 g/l/h). Anaerobic continuous culture of M. succiniciproducens MBEL55E in a whey-based medium containing CSL resulted in a succinic acid yield of 69% and a succinic acid productivity as high as 3.90 g/l/h. These results show that succinic acid can be produced efficiently and economically by M. succiniciproducens MBEL55E from whey and CSL.     

L-缬氨酸产生菌的选育及其发酵培养基的优化

以黄色短杆菌(Brevibacterium flavum)NJ-237为出发菌株,通过梯度传代适应性培养及同浓度药物平板富集培养的方式,逐步提高菌体的抗药物性能,获得了1株耐高糖和耐高浓度α-氨基丁酸(-αAB)的菌株NJ-2372。在单因素实验的基础上,利用响应面分析法对影响该菌株L-缬氨酸(L-Val)产量的3个重要因素玉米浆、生物素(VH)、硫胺素(VB1)的添加量进行优化。结果表明:当玉米浆、VH、VB1最佳添加量分别为11 g/L、35μg/L和101μg/L时,摇瓶发酵72 h,L-Val摇瓶发酵产量达到52.9 g/L。     

重组谷氨酸棒杆菌发酵L-苯丙氨酸培养基的优化

【目的】提高重组谷氨酸棒杆菌发酵L-苯丙氨酸(L-phenylalanine,L-Phe)的产量。【方法】使用正交试验设计以及响应面优化法分别对种子培养基及发酵培养基进行优化,确定了重组谷氨酸棒杆菌发酵L-Phe的最佳种子培养基及最佳发酵培养基。【结果】重组谷氨酸棒杆菌发酵L-Phe最佳种子培养基(g/L):葡萄糖25.0,玉米浆25.0,硫酸铵15.0,硫酸镁1.0,磷酸二氢钾2.0,尿素2.0,p H 6.8-7.0;最佳发酵培养基(g/L):葡萄糖110.0,玉米浆7.0,硫酸铵25.0,硫酸镁1.0,磷酸二氢钾1.0,柠檬酸钠2.0,谷氨酸1.0,碳酸钙25.0,p H 6.8-7.0;在最佳培养基条件下L-Phe产量最高达到9.14 g/L,较优化前的7.46 g/L提高了22.5%。【结论】通过正交试验和响应面分析对重组谷氨酸棒杆菌发酵L-Phe培养基进行优化,明显提高了L-Phe的产量,并确定了葡萄糖、玉米浆和硫酸铵为发酵培养基中影响L-Phe产量的3个关键因子。研究结果为L-Phe的发酵放大提供了依据。     

An industrial medium for improved production of carotenoids from a mutant strain of Phaffia rhodozyma

A medium based on less expensive nutrient sources, such as corn starch hydrolyzate (hydrol), corn steep liquor (CSL), urea and potassium phosphate was used for the growth of the yeast Phaffia rhodozyma 2A2N strain. A central composite experimental design has been employed to derive a statistical model on the effect of hydrol and CSL on carotenoid production. An initial concentration of sugars as glucose equivalent 73?g/l in hydrol and 43?g/l CSL were found optimal for the maximization of final carotenoid production in shake flask cultures. The carotenoid production was increased by adding urea and phosphate sources. Laboratory scale fermentation was performed with the optimized medium and total carotenoid production of 52.4?mg/l was obtained using constant fed-batch culture.     

The utilization of beet molasses as a novel carbon source for cephalosporin C production by Acremonium chrysogenum: Optimization of process parameters through statistical experimental designs

In this work, cephalosporin C (CPC) production on pilot scale fermenters of 600l capacity with 350l working volume by Acremonium chrysogenum EMCC 904 was performed. The effects of fermentation medium composition, inoculum concentration, initial pH and aeration rate on CPC production by A. chrysogenum strain was investigated by using response surface methodology (RSM). The Plackett-Burman design which involves two concentrations of each nutrient was effective in searching for the major medium components promoting CPC production. Under our experimental conditions; Soya oil, beet molasses and corn steep liquor were found to be the major factors contributing to the antibiotic production. Subsequently, a Box-Behnken design was used for outlining the concentration of the most effective medium constituents. Estimated optimum composition for the production of CPC was as follows: soya oil, 40g/l; beet molasses, 180g/l; and corn steep liquor, 330g/l. The central composite design was used for outlining the optimum values of the fermentation parameters. Estimated optimum values for the production of CPC are as follows: inoculum level, 10(5.5)spores/ml; initial pH, 4.3; and aeration rate, 9364ml/min.     

Fermentation of deproteinized cheese whey powder solutions to ethanol by engineered <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>: effect of supplementation with corn steep liquor and repeated-batch operation with biomass recycling by flocculation

The lactose in cheese whey is an interesting substrate for the production of bulk commodities such as bio-ethanol, due to the large amounts of whey surplus generated globally. In this work, we studied the performance of a recombinant Saccharomyces cerevisiae strain expressing the lactose permease and intracellular ß-galactosidase from Kluyveromyces lactis in fermentations of deproteinized concentrated cheese whey powder solutions. Supplementation with 10 g/l of corn steep liquor significantly enhanced whey fermentation, resulting in the production of 7.4% (v/v) ethanol from 150 g/l initial lactose in shake-flask fermentations, with a corresponding productivity of 1.2 g/l/h. The flocculation capacity of the yeast strain enabled stable operation of a repeated-batch process in a 5.5-l air-lift bioreactor, with simple biomass recycling by sedimentation of the yeast flocs. During five consecutive batches, the average ethanol productivity was 0.65 g/l/h and ethanol accumulated up to 8% (v/v) with lactose-to-ethanol conversion yields over 80% of theoretical. Yeast viability (>97%) and plasmid retention (>84%) remained high throughout the operation, demonstrating the stability and robustness of the strain. In addition, the easy and inexpensive recycle of the yeast biomass for repeated utilization makes this process economically attractive for industrial implementation.     

Optimization of medium composition for improving biomass production of Lactobacillus plantarum Pi06 using the Taguchi array design and the Box-Behnken method

An immune-enhancing strain, Lactobacillus plantarum Pi06, isolated from a healthy infant was used for biomass production following optimization of the medium in shake-flask culture. Preliminary studies showed that commercial MRS medium and cultivation under static conditions generated higher biomass production than four other tested media with or without a shaking condition. The selected medium composition, consisting of glucose, yeast extract, soy peptone, ammonium citrate, and corn steep liquor, was further optimized using a systematic method that integrated the Taguchi array design and the Box-Behnken method. The response effects of these factors were first investigated using Taguchi design under an L ₁₆ (4⁵) array. The suggested medium composition, derived from Statistica 7.1 using the Taguchi design, was applied to cultivate cells and a biomass of 7.16 g dry cell weight (DCW)/L was obtained. Response surface methodology based on the Box-Behnken method for the three response variables of glucose, yeast extract, and corn steep liquor was then used to further increase the biomass level to 8.94 g DCW/L. The resulting optimum medium consisted of 35 g/L glucose, 35 g/L yeast extract, and 40 mL/L corn steep liquor. Compared with the initial medium, the biomass yield was improved from 4.31 to 8.94 g DCW/L, an enhancement of approximately 107%.     

Fed-batch fermentation with and without on-line extraction for propionic and acetic acid production byPropionibacterium acidipropionici

Fed-batch propionic and acetic acid fermentations were performed in semi-defined laboratory medium and in corn steep liquor withPropionibacterium acidipropionici strain P9. On average, over four experiments, 34.5 g/l propionic acid and 12.8 g/l acetic acid were obtained in about 146 h in laboratory medium with 79 g/l glucose added over five feeding periods. The highest concentration of propionic acid, 45 g/l, was obtained when the glucose concentration was not allowed to drop to zero. In corn steep liquor 35 g/l propionic acid and 11 g/l acetic acid were produced in 108 h from 59.4 g/l total lactic acid provided as seven feedings of corn steep liquor. Extractive fed-batch fermentations were conducted in semi-defined medium using either flat-sheet-supported liquid membranes or hollow-fiber membrane extraction to remove organic acids from the culture medium. As operated during the course of the fermentation, these systems extracted 25% and 22% of the acetic acid and 36.5% and 44.5% of the propionic acid, respectively, produced in the fermentation. Total amounts of acids produced were about the same as in comparable nonextractive fermentations: 30–37 g/l propionic acid and 13 g/l acetic acid were produced in 150 h. Limitations on acid production can be attributed to limited substrate feed, not to failure of the extraction system.Journal paper J-16303 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project 3122.     

Acetate production from whey lactose using co-immobilized cells of homolactic and homoacetic bacteria in a fibrous-bed bioreactor

Acetate was produced from whey lactose in batch and fed-batch fermentations using co-immobilized cells of Clostridium formicoaceticum and Lactococcus lactis. The cells were immobilized in a spirally wound fibrous sheet packed in a 0.45-L column reactor, with liquid circulated through a 5-L stirred-tank fermentor. Industrial-grade nitrogen sources, including corn steep liquor, casein hydrolysate, and yeast hydrolysate, were studied as inexpensive nutrient supplements to whey permeate and acid whey. Supplementation with either 2.5% (v/v) corn steep liquor or 1.5 g/L casein hydrolysate was adequate for the cocultured fermentation. The overall acetic acid yield from lactose was 0.9 g/g, and the productivity was 0.25 g/(L h). Both lactate and acetate at high concentrations inhibited the homoacetic fermentation. To overcome these inhibitions, fed-batch fermentations were used to keep lactate concentration low and to adapt cells to high-concentration acetate. The final acetate concentration obtained in the fed-batch fermentation was 75 g/L, which was the highest acetate concentration ever produced by C. formicoaceticum. Even at this high acetate concentration, the overall productivity was 0.18 g/(L h) based on the total medium volume and 1.23 g/(L h) based on the fibrous-bed reactor volume. The cells isolated from the fibrous-bed bioreactor at the end of this study were more tolerant to acetic acid than the original culture used to seed the bioreactor, indicating that adaptation and natural selection of acetate-tolerant strains occurred. This cocultured fermentation process could be used to produce a low-cost acetate deicer from whey permeate and acid whey.     

Production of Poly(3-hydroxybutyrate) by fed-batch culture of recombinant Escherichia coli with a highly concentrated whey solution

Fermentation strategies for the production of poly(3-hydroxybutyrate) (PHB) from whey by recombinant Escherichia coli strain CGSC 4401 harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes were developed. The pH-stat fed-batch cultures of E. coli CGSC 4401 harboring pJC4, a stable plasmid containing the A. latus PHA biosynthesis genes, were carried out with a concentrated whey solution containing 280 g of lactose equivalent per liter. Final cell and PHB concentrations of 119.5 and 96.2 g/liter, respectively, were obtained in 37.5 h, which resulted in PHB productivity of 2.57 g/liter/h.     

Phenazine-1-carboxylic acid production in a chromosomally non-scar triple-deleted mutant Pseudomonas aeruginosa using statistical experimental designs to optimize yield

We constructed a non-scar triple-deleted mutant Pseudomonas aeruginosa to improve phenazine-1-carboxylic acid (PCA) yield and then optimized the culture conditions for PCA production. Using a non-scar deletion strategy, the 5′-untranslated region of the phz1 gene cluster and two genes, phzM and phzS, were knocked out of the P. aeruginosa strain M18 genome. The potential ability for high-yield PCA production in this triple-deleted mutant M18MSU1 was successfully realized by using statistical experimental designs. A 2^5–1 fractional factorial design was used to show that the three culture components of soybean meal, corn steep liquor and ethanol had the most significant effect on PCA production. Using a central composite design, the concentration of the three components was optimized. The maximum PCA production was predicted to be 4,725.1 mg/L. With the optimal medium containing soybean meal 74.25 g/L, corn steep liquor 13.01 g/L and ethanol 21.84 ml/L, a PCA production of 4,771.2 mg/L was obtained in the validation experiments, which was nearly twofold of that before optimization and tenfold of that in the wild-type strain. This non-scar triple-deleted mutant M18MSU1 may be a suitable strain for industrial production of this biologically synthesized fungicide due to its high PCA production, presumed safety, thermal adaptability and cost-effectiveness.     

Production of mycelial biomass and exo-polymer by <Emphasis Type="Italic">Hericium erinaceus</Emphasis> CZ-2: Optimization of nutrients levels using response surface methodology

The Doehlert experimental design was used to optimize the production of mycelial biomass and exopolymer from Hericium erinaceus CZ-2 in this study. Statistical analysis showed that the linear and quadric terms of 3 variables: corn flour, yeast extract, and corn steep liquor had significant effects. The optimized combination of these 3 variables was confirmed through validation experiments. The optimal conditions for higher production of mycelial biomass (19.92 g/L) were estimated when the media composition concentrations were set as: 30.85 g/L, corn flour; 2.81 g/L, yeast extract; 16.9 mL/L, corn steep liquor; 10 g/L, glucose; 1 g/L, KH₂PO₄; and 0.5 g/L, MgSO₄·7H₂O; while a maximal exo-polymer yield (1.653 g/L) could be achieved when setting concentrations of: 32.71 g/L, corn flour; 2.35 g/L, Yeast extract; 14.42 mL/L, Corn steep liquor; 10 g/L, glucose; 1 g/L, KH₂PO₄; and 0.5 g/L, MgSO₄·7H₂O. The upscale production was also investigated using a 15 L fermentor using the optimized medium.     

里氏木霉Trichoderma reesei产纤维素酶的发酵培养基碳氮源优化

研究C、N源对里氏木霉(Trichoderma reesei)生产纤维素酶的影响,采用单因素实验方法和中心复合方法对发酵培养基进行优化。单因素实验表明:黄豆饼粉、玉米芯、玉米浆对纤维素酶的影响显著。通过响应面优化,得到最优培养基C、N源的组成:黄豆饼粉32.21 g/L,玉米芯42.29 g/L,玉米浆4.45 g/L。优化条件下,摇瓶发酵7 d的比酶活达到(10.65±0.50)U/mL。     

Production of D-Alanine by Corynebacterium fascians

A strain identified as Corynebacterium fascians was found to accumulate extracellular D-alanine from glycerol. Cultural conditions for the accumulation of D-alanine were investigated and, as a result, a yield of 7 g of D-alanine per liter was obtained after a 96-h incubation in a medium containing 5% glycerol, 4% (NH(4))(2)HPO(4), and 0.3% corn steep liquor. Optical purity of D-alanine was dependent upon the concentration of corn steep liquor. At the optimal condition, almost optically pure D-alanine was formed and readily isolated (5 g/liter) from the fermentation broth. The product was not contaminated with any detectable amount of other amino acids, except for glycine which was present at a concentration of less than 1 percent.     

Production of Poly(3-Hydroxybutyrate) by Fed-Batch Culture of Recombinant Escherichia coli with a Highly Concentrated Whey Solution

Fermentation strategies for the production of poly(3-hydroxybutyrate) (PHB) from whey by recombinant Escherichia coli strain CGSC 4401 harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes were developed. The pH-stat fed-batch cultures of E. coli CGSC 4401 harboring pJC4, a stable plasmid containing the A. latus PHA biosynthesis genes, were carried out with a concentrated whey solution containing 280 g of lactose equivalent per liter. Final cell and PHB concentrations of 119.5 and 96.2 g/liter, respectively, were obtained in 37.5 h, which resulted in PHB productivity of 2.57 g/liter/h.     

Optimization of phenazine-1-carboxylic acid production by a gacA/qscR-inactivated Pseudomonas sp. M18GQ harboring pME6032Phz using response surface methodology

Phenazine-1-carboxylic acid (PCA) production was enhanced in Pseudomonas sp. M18 wild strain and its mutants carrying recombinant pME6032Phz for phz gene cluster overexpression, among which Pseudomonas sp. strain M18GQ/pME6032Phz, a gacA and qscR double gene chromosomally inactivated mutant harboring pME6032Phz, showed the highest PCA yield. The conditions for fermentation and isopropyl-β-d-1-thiogalactopyranoside (IPTG) induction were optimized for strain M18GQ/pME6032Phz in shake flask experiments. A one-factor-at-a-time approach, followed by a fractional factorial design identified soybean meal, corn steep liquor, and ethanol as statistically significant factors. Optimal concentrations and mutual interactions of the factors were then determined by the method of steepest ascent and by response surface methodology based on the center composite design. The predicted PCA production was 6,335.2 mg/l after 60 h fermentation in the optimal medium of 65.02 g soybean meal, 15.36 g corn steep liquor, 12 g glucose, 21.70 ml ethanol, and 1 g MgSO₄ per liter in the flask fermentations, with induction of 1.0 mmol/l IPTG 24 h after inoculation. In an experimental validation under these conditions, the maximum PCA production was 6,365.0 mg/l. This represents a ∼60% increase over production by strain M18GQ in optimal conditions. The negative effect of plasmid pME6032 on the expression of chromosomally located phz gene cluster was found in Pseudomonas sp. M18GQ, and the possible reason was discussed in the text.