Observing growth steps of collagen self-assembly by time-lapse high-resolution atomic force microscopy

Insights into molecular mechanisms of collagen assembly are important for understanding countless biological processes and at the same time a prerequisite for many biotechnological and medical applications. In this work, the self-assembly of collagen type I molecules into fibrils could be directly observed using time-lapse atomic force microscopy (AFM). The smallest isolated fibrillar structures initiating fibril growth showed a thickness of approximately 1.5 nm corresponding to that of a single collagen molecule. Fibrils assembled in vitro established an axial D-periodicity of approximately 67 nm such as typically observed for in vivo assembled collagen fibrils from tendon. At given collagen concentrations of the buffer solution the fibrils showed constant lateral and longitudinal growth rates. Single fibrils continuously grew and fused with each other until the supporting surface was completely covered by a nanoscopically well-defined collagen matrix. Their thickness of approximately 3 nm suggests that the fibrils were build from laterally assembled collagen microfibrils. Laterally the fibrils grew in steps of approximately 4 nm, indicating microfibril formation and incorporation. Thus, we suggest collagen fibrils assembling in a two-step process. In a first step, collagen molecules assemble with each other. In the second step, these molecules then rearrange into microfibrils which form the building blocks of collagen fibrils. High-resolution AFM topographs revealed substructural details of the D-band architecture of the fibrils forming the collagen matrix. These substructures correlated well with those revealed from positively stained collagen fibers imaged by transmission electron microscopy.     

Hierarchical assembly and the onset of banding in fibrous long spacing collagen revealed by atomic force microscopy.

The mechanism of formation of fibrillar collagen with a banding periodicity much greater than the 67 nm of native collagen, i.e. the so-called fibrous long spacing (FLS) collagen, has been speculated upon, but has not been previously studied experimentally from a detailed structural perspective. In vitro, such fibrils, with banding periodicity of approximately 270 nm, may be produced by dialysis of an acidic solution of type I collagen and alpha(1)-acid glycoprotein against deionized water. FLS collagen assembly was investigated by visualization of assembly intermediates that were formed during the course of dialysis using atomic force microscopy. Below pH 4, thin, curly nonbanded fibrils were formed. When the dialysis solution reached approximately pH 4, thin, filamentous structures that showed protrusions spaced at approximately 270 nm were seen. As the pH increased, these protofibrils appeared to associate loosely into larger fibrils with clear approximately 270 nm banding which increased in diameter and compactness, such that by approximately pH 4.6, mature FLS collagen fibrils begin to be observed with increasing frequency. These results suggest that there are aspects of a stepwise process in the formation of FLS collagen, and that the banding pattern arises quite early and very specifically in this process. It is proposed that typical 4D-period staggered microfibril subunits assemble laterally with minimal stagger between adjacent fibrils. alpha(1)-Acid glycoprotein presumably promotes this otherwise abnormal lateral assembly over native-type self-assembly. Cocoon-like fibrils, which are hundreds of nanometers in diameter and 10-20 microm in length, were found to coexist with mature FLS fibrils.     

Assembly of type I collagen: fusion of fibril subunits and the influence of fibril diameter on mechanical properties.

Structural stability of the extracellular matrix is primarily a consequence of fibrillar collagen and the extent of cross-linking. The relationship between collagen self-assembly, consequent fibrillar shape and mechanical properties remains unclear. Our laboratory developed a model system for the preparation of self-assembled type I collagen fibers with fibrillar substructure mimicking the hierarchical structures of tendon. The present study evaluates the effects of pH and temperature during self-assembly on fibrillar structure, and relates the structural effects of these treatments on the uniaxial tensile mechanical properties of self-assembled collagen fibers. Results of the analysis of fibril diameter distributions and mechanical properties of the fibers formed under the different incubation conditions indicate that fibril diameters grow via the lateral fusion of discrete approximately 4 nm subunits, and that fibril diameter correlates positively with the low strain modulus. Fibril diameter did not correlate with either the ultimate tensile strength or the high strain elastic modulus, which suggests that lateral aggregation and consequently fibril diameter influences mechanical properties during small strain mechanical deformation. We hypothesize that self-assembly is mediated by the formation of fibrillar subunits that laterally and linearly fuse resulting in fibrillar growth. Lateral fusion appears important in generating resistance to deformation at low strain, while linear fusion leading to longer fibrils appears important in the ultimate mechanical properties at high strain.     

A Kinetic Study of Ovalbumin Fibril Formation: The Importance of Fragmentation and End-Joining

The ability to control the morphologies of biomolecular aggregates is a central objective in the study of self-assembly processes. The development of predictive models offers the surest route for gaining such control. Under the right conditions, proteins will self-assemble into fibers that may rearrange themselves even further to form diverse structures, including the formation of closed loops. In this study, chicken egg white ovalbumin is used as a model for the study of fibril loops. By monitoring the kinetics of self-assembly, we demonstrate that loop formation is a consequence of end-to-end association between protein fibrils. A model of fibril formation kinetics, including end-joining, is developed and solved, showing that end-joining has a distinct effect on the growth of fibrillar mass density (which can be measured experimentally), establishing a link between self-assembly kinetics and the underlying growth mechanism. These results will enable experimentalists to infer fibrillar morphologies from an appropriate analysis of self-assembly kinetic data.     

Self-assembly of Mutant Huntingtin Exon-1 Fragments into Large Complex Fibrillar Structures Involves Nucleated Branching

Huntingtin (HTT) fragments with extended polyglutamine tracts self-assemble into amyloid-like fibrillar aggregates. Elucidating the fibril formation mechanism is critical for understanding Huntington's disease pathology and for developing novel therapeutic strategies. Here, we performed systematic experimental and theoretical studies to examine the self-assembly of an aggregation-prone N-terminal HTT exon-1 fragment with 49 glutamines (Ex1Q49). Using high-resolution imaging techniques such as electron microscopy and atomic force microscopy, we show that Ex1Q49 fragments in cell-free assays spontaneously convert into large, highly complex bundles of amyloid fibrils with multiple ends and fibril branching points. Furthermore, we present experimental evidence that two nucleation mechanisms control spontaneous Ex1Q49 fibrillogenesis: (1) a relatively slow primary fibril-independent nucleation process, which involves the spontaneous formation of aggregation-competent fibrillary structures, and (2) a fast secondary fibril-dependent nucleation process, which involves nucleated branching and promotes the rapid assembly of highly complex fibril bundles with multiple ends. The proposed aggregation mechanism is supported by studies with the small molecule O4, which perturbs early events in the aggregation cascade and delays Ex1Q49 fibril assembly, comprehensive mathematical and computational modeling studies, and seeding experiments with small, preformed fibrillar Ex1Q49 aggregates that promote the assembly of amyloid fibrils. Together, our results suggest that nucleated branching in vitro plays a critical role in the formation of complex fibrillar HTT exon-1 aggregates with multiple ends.     

One-dimensional self-assembly of a rational designed beta-structure peptide

Fabricating various nanostructures based on the self-assembly of diverse biological molecules is now of great interest to the field of bionanotechnology. In this study, we report a de novo designed peptide (T1) with a preferential beta-hairpin forming property that can spontaneously assemble into nanofibrils in ultrapure water. The nanofibrils assembled by T1 could grow up to tens of microns in length with a left-handed helical twist and an average height of 4.9 +/- 0.9 nm. Moreover, protofilaments and nucleus structures both with a similar height of 1.4 +/- 0.2 nm were observed during fibrilization as well as via sonication of the mature nanofibrils. A typical conformational transition from random coil to beta-structure was observed in association with the fibrilization. Molecular modeling of T1 assemblies displayed that the beta-hairpin molecules organize in a parallel fashion in which the beta-strands align in an antiparallel fashion and each adjoining beta-strand runs left-handed twist at about 2.9 degrees with respect to the one located before it along the fibrillar axis. It also revealed that the maximum thickness of the assembly intermediate, the helical tape structure, is about 1.4 nm and four tapes can further assemble into a fibril with a diameter of about 4.1 nm. Taken together the results obtained by AFM, CD, and molecular modeling, T1 fibrilization probably undergoes a hierarchy approach, in which the aromatic stacking and the electrostatic interactions between the assembled structures are most likely the two major factors directing the one-dimensional self-assembly. Based on these studies, we propose T1 can be used as a model peptide to investigate the beta-sheet based self-assembly process and could be a potential bioorganic template to develop functional materials.     

An energetic evaluation of a "Smith" collagen microfibril model.

An energy minimized three-dimensional structure of a collagen microfibril template was constructed based on the five-stranded model of Smith (1968), using molecular modeling methods and Kollman force fields (Weiner and Kollman, 1981). For this model, individual molecules were constructed with three identical polypeptide chains ((Gly-Pro-Pro) _n , (Gly-Prop-Hyp) _n , or (Gly-Ala-Ala) _n , wheren=4, 12, and 16) coiled into a right-handed triple-helical structure. The axial distance between adjacent amino acid residues is about 0.29 nm per polypeptide chain, and the pitch of each chain is approximately 3.3 residues. The microfibril model consists of five parallel triple helices packed so that a left-handed superhelical twist exists. The structural characteristics of the computed microfibril are consistent with those obtained for collagen by X-ray diffraction and electron microscopy. The energy minimized Smith microfibril model for (Gly-Pro-Pro)₁₂ has an axial length of about 10.2 nm (for a 36 amino acid residue chain), which gives an estimated D-spacing (234 amino acids per chain) of approximately 66.2 nm. Studies of the microfibril models (Gly-Pro-Pro)₁₂, (Gly-Pro-Hyp)₁₂, and (Gly-Ala-Ala)₁₂ show that nonbonded van der Waals interactions are important for microfibril formation, while electrostatic interactions contribute to the stability of the microfibril structure and determine the specificity by which collagen molecules pack within the microfibril.     

Immunoelectronmicroscopic localization of extracellular matrix components produced by bovine corneal endothelial cells in vitro

Bovine corneal endothelial cells deposit an extracellular matrix in short-term cultures, which contains various morphologically distinct structures when analysed by electron microscopy after negative staining. Amongst these were long-spacing fibers with a 150 nm periodicity, which appeared also to be assembled into more complex hexagonal lattices. Another structure was fine filaments, 10-40 nm in diameter, which occasionally exhibited 67 nm periodic cross-striation. Non-striated 10-20 nm filaments sometimes formed radially oriented bundles arranged in networks and fuzzy granular material was associated with the filaments in the bundles. Often, these bundles extended into solitary filaments, 10-20 nm in diameter, with a smooth surface. In addition, amorphous patches were seen, which contained dense aggregates of fibrillar and granular material. In longer-term cultures, some of the structures coalesced to form large fibrillar bundles. By using specific antibodies to various extracellular matrix components and immunolabeling with gold some of these structures could be identified as to their protein composition. Whereas fibronectin antibodies labeled a variety of structures--fine filaments with granular materials, radially oriented bundles, patchy amorphous aggregates and small granular material scattered throughout the background--type III collagen antibody predominantly labeled filaments with periodic banding (10-40 nm in diameter). A small amount of type III specific labeling was also observed over the networks of radially oriented fibrils and fine filaments associated with granular material. Type IV collagen and laminin antibodies localized in areas of the patchy amorphous aggregates. Type VI collagen antibodies, on the other hand, labeled fine filaments and the gold particles showed a pattern of 100 nm periodicity. Many of the fine 10-20 nm filaments exhibited a tubular appearance on cross-section, but they were not reactive with any of the antibodies used. Also negative were the long-spacing fibers and assemblies--including hexagonal lattices--containing this structural element.     

Molecular assembly, secretion, and matrix deposition of type VI collagen

Monoclonal antibodies reactive with the tissue form of type VI collagen were used to isolate the type VI collagen polypeptides from cultured fibroblasts and muscle cells. Two [35S]methionine-labeled polypeptides of 260 and 140 kD were found intracellularly, in the medium, and in the extracellular matrix of metabolically labeled cells. These polypeptides were disulfide cross-linked into very large complexes. The 260- and 140-kD polypeptides were intimately associated and could not be separated from each other by reduction without denaturation. In the absence of ascorbic acid, both polypeptides accumulated inside the cell, and their amounts in the medium and in the matrix were decreased. These results suggest that both the 260- and the 140-kD polypeptides are integral parts of the type VI collagen molecule. Examination of type VI collagen isolated from the intracellular pool by electron microscopy after rotary shadowing revealed structures corresponding to different stages of assembly of type VI collagen. Based on these images, a sequence for the intracellular assembly of type VI collagen could be discerned. Type VI collagen monomers are approximately 125 nm long and are composed of two globules separated by a thin strand. The monomers assemble into dimers and tetramers by lateral association. Only tetramers were present in culture media, whereas both tetramers and multimers were found in extracellular matrix extracts. The multimers appeared to have assembled from tetramers by end-to-end association into filaments that had prominent knobs and a periodicity of approximately 110 nm. These results show that, unlike other collagens, type VI collagen is assembled into tetramers before it is secreted from the cells, and they also suggest an extracellular aggregation mechanism that appears to be unique to this collagen.     

An energetic evaluation of a “Smith” collagen microfibril model

An energy minimized three-dimensional structure of a collagen microfibril template was constructed based on the five-stranded model of Smith (1968), using molecular modeling methods and Kollman force fields (Weiner and Kollman, 1981). For this model, individual molecules were constructed with three identical polypeptide chains ((Gly-Pro-Pro) _n , (Gly-Prop-Hyp) _n , or (Gly-Ala-Ala) _n , wheren=4, 12, and 16) coiled into a right-handed triple-helical structure. The axial distance between adjacent amino acid residues is about 0.29 nm per polypeptide chain, and the pitch of each chain is approximately 3.3 residues. The microfibril model consists of five parallel triple helices packed so that a left-handed superhelical twist exists. The structural characteristics of the computed microfibril are consistent with those obtained for collagen by X-ray diffraction and electron microscopy. The energy minimized Smith microfibril model for (Gly-Pro-Pro)₁₂ has an axial length of about 10.2 nm (for a 36 amino acid residue chain), which gives an estimated D-spacing (234 amino acids per chain) of approximately 66.2 nm. Studies of the microfibril models (Gly-Pro-Pro)₁₂, (Gly-Pro-Hyp)₁₂, and (Gly-Ala-Ala)₁₂ show that nonbonded van der Waals interactions are important for microfibril formation, while electrostatic interactions contribute to the stability of the microfibril structure and determine the specificity by which collagen molecules pack within the microfibril.     

Molecular structure and interaction of recombinant human type XVI collagen

Collagen XVI is a minor component of at least two different extracellular fibrillar networks of specialized regions of skin and cartilage. In skin, collagen XVI is integrated into particular fibrillin-rich microfibrils lacking an amorphous elastin core. In cartilage, collagen XVI is a component of small heterotypic D-banded fibrils, mainly occurring in the territorial matrix of chondrocytes. Here, we present the first direct evidence for the molecular structure and functional properties of these fibril-associated collagens with interrupted triple helices (FACIT). We have expressed recombinantly the full-length alpha1 chain of human collagen XVI in HEK 293 EBNA cells in large quantities using an episomal expression system. Secreted full-length recombinant collagen XVI forms stable disulfide-bonded homotrimers and is rapidly proteolytically processed to distinct fragments at specific protease sequence motifs, one resembling an aggrecanase recognition site. Limited trypsin digestion assays and thermal transition curves imply sequential thermal denaturation of individual triple helical domains of this recombinant collagen, similar to authentic collagen XVI. Molecular images of collagen XVI reveal rod-like molecules which harbor multiple sharp kinks attributing a highly flexible structure presumably introduced by non-collagenous (NC) regions. Terminally located cloverleaf-shaped nodules correspond to the large NC NC11 domain of trimeric collagen XVI. The total length of individual trimeric recombinant collagen XVI molecules constitutes about 240 nm as calculated by atomic force and negative staining electron microscopy. Recombinant collagen XVI interacts with fibrillin-1 and with fibronectin indicating multiple molecular interactions in which this ubiquitously expressed and versatile FACIT-collagen can participate. In vitro generated collagen XVI provides an indispensable tool for future determination of its function during supramolecular assembly of matrix aggregates and its role in maintenance, organization and interaction of fibrillar structures.     

Microrheological Characterization of Collagen Systems: From Molecular Solutions to Fibrillar Gels

Collagen is the most abundant protein in the extracellular matrix (ECM), where its structural organization conveys mechanical information to cells. Using optical-tweezers-based microrheology, we investigated mechanical properties both of collagen molecules at a range of concentrations in acidic solution where fibrils cannot form and of gels of collagen fibrils formed at neutral pH, as well as the development of microscale mechanical heterogeneity during the self-assembly process. The frequency scaling of the complex shear modulus even at frequencies of ∼10 kHz was not able to resolve the flexibility of collagen molecules in acidic solution. In these solutions, molecular interactions cause significant transient elasticity, as we observed for 5 mg/ml solutions at frequencies above ∼200 Hz. We found the viscoelasticity of solutions of collagen molecules to be spatially homogeneous, in sharp contrast to the heterogeneity of self-assembled fibrillar collagen systems, whose elasticity varied by more than an order of magnitude and in power-law behavior at different locations within the sample. By probing changes in the complex shear modulus over 100-minute timescales as collagen self-assembled into fibrils, we conclude that microscale heterogeneity appears during early phases of fibrillar growth and continues to develop further during this growth phase. Experiments in which growing fibrils dislodge microspheres from an optical trap suggest that fibril growth is a force-generating process. These data contribute to understanding how heterogeneities develop during self-assembly, which in turn can help synthesis of new materials for cellular engineering.     

Structure of the integrin binding fragment from fibrillin-1 gives new insights into microfibril organization

Human fibrillin-1, the major structural protein of extracellular matrix (ECM) 10-12 nm microfibrils, is dominated by 43 calcium binding epidermal growth factor-like (cbEGF) and 7 transforming growth factor beta binding protein-like (TB) domains. Crystal structures reveal the integrin binding cbEGF22-TB4-cbEGF23 fragment of human fibrillin-1 to be a Ca(2+)-rigidified tetragonal pyramid. We suggest that other cbEGF-TB pairs within the fibrillins may adopt a similar orientation to cbEGF22-TB4. In addition, we have located a flexible RGD integrin binding loop within TB4. Modeling, cell attachment and spreading assays, immunocytochemistry, and surface plasmon resonance indicate that cbEGF22 bound to TB4 is a requirement for integrin activation and provide insight into the molecular basis of the fibrillin-1 interaction with alphaVbeta3. In light of our data, we propose a novel model for the assembly of the fibrillin microfibril and a mechanism to explain its extensibility.     

Self-assembly of collagen fibers. Influence of fibrillar alignment and decorin on mechanical properties.

Collagen is the primary structural element in extracellular matrices. In the form of fibers it acts to transmit forces, dissipate energy, and prevent premature mechanical failure in normal tissues. Deformation of collagen fibers involves molecular stretching and slippage, fibrillar slippage, and, ultimately, defibrillation. Our laboratory has developed a process for self-assembly of macroscopic collagen fibers that have structures and mechanical properties similar to rat tail tendon fibers. The purpose of this study is to determine the effects of subfibrillar orientation and decorin incorporation on the mechanical properties of collagen fibers. Self-assembled collagen fibers were stretched 0-50% before cross-linking and then characterized by microscopy and mechanical testing. Results of these studies indicate that fibrillar orientation, packing, and ultimate tensile strength can be increased by stretching. In addition, it is shown that decorin incorporation increases ultimate tensile strength of uncross-linked fibers. Based on the observed results it is hypothesized that decorin facilitates fibrillar slippage during deformation and thereby improves the tensile properties of collagen fibers.     

Probabilistic Analysis of Pattern Formation in Monotonic Self-Assembly

Inspired by biological systems, self-assembly aims to construct complex structures. It functions through piece-wise, local interactions among component parts and has the potential to produce novel materials and devices at the nanoscale. Algorithmic self-assembly models the product of self-assembly as the output of some computational process, and attempts to control the process of assembly algorithmically. Though providing fundamental insights, these computational models have yet to fully account for the randomness that is inherent in experimental realizations, which tend to be based on trial and error methods. In order to develop a method of analysis that addresses experimental parameters, such as error and yield, this work focuses on the capability of assembly systems to produce a pre-determined set of target patterns, either accurately or perhaps only approximately. Self-assembly systems that assemble patterns that are similar to the targets in a significant percentage are “strong” assemblers. In addition, assemblers should predominantly produce target patterns, with a small percentage of errors or junk. These definitions approximate notions of yield and purity in chemistry and manufacturing. By combining these definitions, a criterion for efficient assembly is developed that can be used to compare the ability of different assembly systems to produce a given target set. Efficiency is a composite measure of the accuracy and purity of an assembler. Typical examples in algorithmic assembly are assessed in the context of these metrics. In addition to validating the method, they also provide some insight that might be used to guide experimentation. Finally, some general results are established that, for efficient assembly, imply that every target pattern is guaranteed to be assembled with a minimum common positive probability, regardless of its size, and that a trichotomy exists to characterize the global behavior of typical efficient, monotonic self-assembly systems in the literature.     

Fibrillar pattern of self-assembled and cell-assembled collagen: resemblance and analogy.

The geometrical characteristics of fibrillar organizations are studied by electron microscopy in structures obtained in vitro in cell-free assembled collagen gels, and in vivo in dermal tracts of anuran skin. We analyze several characteristics of the fibrils including the diameter, the outline, the curvature and the extrafibrillar space. We analyze also the variation of fibrillar orientation (twist) in longitudinal and transverse thin sections of these structures. The results are compared in the Discussion to determine to what extent these fibrillar patterns are similar to liquid crystalline organizations and to what extent they result from a self-assembly or a cell-assembly process.     

Self Assembly of Short Aromatic Peptides into Amyloid Fibrils and Related Nanostructures

The formation of amyloid fibrils is the hallmark of more than twenty human disorders of unrelated etiology. In all these cases, ordered fibrillar protein assemblies with a diameter of 7-10 nm are being observed. In spite of the great clinical important of amyloid-associated diseases, the molecular recognition and self-assembly processes that lead to the formation of the fibrils are not fully understood. One direction to decipher the mechanism of amyloid formation is the use of short peptides fragments as model systems. Short peptide fragments, as short as pentapeptides, were shown to form typical amyloid assemblies in vitro that have ultrastructural, biophysical, and cytotoxic properties, as those of assemblies that are being formed by full length polypeptides. When we analyzed such short fragments, we identified the central role of aromatic moieties in the ability to aggregate into ordered nano-fibrillar structures. This notion allowed us to discover additional very short amyloidogenic peptides as well as other aromatic peptide motifs, which can form various assemblies at the nano-scale (including nanotubes, nanospheres, and macroscopic hydrogels with nano-scale order). Other practical utilization of this concept, together with novel β-breakage methods, is their use for the development of novel classes of amyloid formation inhibitors.     

Physiological type I collagen organization induces the formation of a novel class of linear invadosomes

Invadosomes are F-actin structures capable of degrading the matrix through the activation of matrix metalloproteases. As fibrillar type I collagen promotes pro-matrix metalloproteinase 2 activation by membrane type 1 matrix metalloproteinase, we aimed at investigating the functional relationships between collagen I organization and invadosome induction. We found that fibrillar collagen I induced linear F-actin structures, distributed along the fibrils, on endothelial cells, macrophages, fibroblasts, and tumor cells. These structures share features with conventional invadosomes, as they express cortactin and N-WASP and accumulate the scaffold protein Tks5, which proved essential for their formation. On the basis of their ability to degrade extracellular matrix elements and their original architecture, we named these structures "linear invadosomes." Interestingly, podosomes or invadopodia were replaced by linear invadosomes upon contact of the cells with fibrillar collagen I. However, linear invadosomes clearly differ from classical invadosomes, as they do not contain paxillin, vinculin, and β1/β3 integrins. Using knockout mouse embryonic fibroblasts and RGD peptide, we demonstrate that linear invadosome formation and activity are independent of β1 and β3 integrins. Finally, linear invadosomes also formed in a three-dimensional collagen matrix. This study demonstrates that fibrillar collagen I is the physiological inducer of a novel class of invadosomes.     

Fibrillins, fibulins, and matrix-associated glycoprotein modulate the kinetics and morphology of in vitro self-assembly of a recombinant elastin-like polypeptide

Elastin is the polymeric protein responsible for the properties of extensibility and elastic recoil of the extracellular matrix in a variety of tissues. Although proper assembly of the elastic matrix is crucial for its durability, the process by which this assembly takes place is not well-understood. Recent data suggest the complex interaction of tropoelastin, the monomeric form of elastin, with a number of other elastic matrix-associated proteins, including fibrillins, fibulins, and matrix-associated glycoprotein (MAGP), is important to achieve the proper architecture of the elastic matrix. At the same time, it is becoming clear that self-assembly properties intrinsic to tropoelastin itself, reflected in a temperature-induced phase separation known as coacervation, are also important in this assembly process. In this study, using a well-characterized elastin-like polypeptide that mimics the self-assembly properties of full-length tropoelastin, the process of self-assembly is deconstructed into "coacervation" and "maturation" stages that can be distinguished kinetically by different parameters. Members of the fibrillin, fibulin, and MAGP families of proteins are shown to profoundly affect both the kinetics of self-assembly and the morphology of the maturing coacervate, restricting the growth of coacervate droplets and, in some cases, causing clustering of droplets into fibrillar structures.     

Twisted architectures in cell-free assembled collagen gels: study of collagen substrates used for cultures

Reprecipitated fibrils from collagen solutions assemble into aggregates often showing a remarkable twisted structure. We first observed these aggregates in collagen gels prepared to facilitate culture of epithelial cells. We verified that these structures form in the absence of cells and correspond to a process of self-assembly. Studies on reconstructed fibrils of collagen are generally based on the examination of thin specimens mounted onto coated grids prepared for electron microscopy. We rather applied the classical methods of fixation, embedding and ultramicrotomy, which allowed us to analyze the structure of these aggregates, several microns in diameter. Our gels were prepared from 2.5 mg/ml tropocollagen solutions usually chosen for cell and organ cultures. The time required to obtain twisted architectures, in these aggregates, depends on temperature and the presence of factors such as fetal calf serum proteins. Twist is observed at two different levels of organization. Microfibrils are gathered into twisted bundles which condense into cross-striated fibrils. These fibrils themselves aggregate and show a mutual twist whose orientation is left-handed as is the twist observed within each microfibril bundle. Several models of these architectures are presented. Planar twist, cylindrical twist and toroidal twist are described and their relation to the structure of certain liquid crystals is considered. Examples of orthogonal packing also have been observed. These structures obtained in vitro are very close to patterns already described in vivo in numerous collagen matrices.