Residual dipolar couplings: are multiple independent alignments always possible?

RDCs for the 14 kDa protein hen egg-white lysozyme (HEWL) have been measured in eight different alignment media. The elongated shape and strongly positively charged surface of HEWL appear to limit the protein to four main alignment orientations. Furthermore, low levels of alignment and the protein’s interaction with some alignment media increases the experimental error. Together with heterogeneity across the alignment media arising from constraints on temperature, pH and ionic strength for some alignment media, these data are suitable for structure refinement, but not the extraction of dynamic parameters. For an analysis of protein dynamics the data must be obtained with very low errors in at least three or five independent alignment media (depending on the method used) and so far, such data have only been reported for three small 6–8 kDa proteins with identical folds: ubiquitin, GB1 and GB3. Our results suggest that HEWL is likely to be representative of many other medium to large sized proteins commonly studied by solution NMR. Comparisons with over 60 high-resolution crystal structures of HEWL reveal that the highest resolution structures are not necessarily always the best models for the protein structure in solution.     

Membrane Protein Structural Validation by Oriented Sample Solid-State NMR: Diacylglycerol Kinase

The validation of protein structures through functional assays has been the norm for many years. Functional assays perform this validation for water-soluble proteins very well, but they need to be performed in the same environment as that used for the structural analysis. This is difficult for membrane proteins that are often structurally characterized in detergent environments, although functional assays for these proteins are most frequently performed in lipid bilayers. Because the structure of membrane proteins is known to be sensitive to the membrane mimetic environment, such functional assays are appropriate for validating the protein construct, but not the membrane protein structure. Here, we compare oriented sample solid-state NMR spectral data of diacylglycerol kinase previously published with predictions of such data from recent structures of this protein. A solution NMR structure of diacylglycerol kinase has been obtained in detergent micelles and three crystal structures have been obtained in a monoolein cubic phase. All of the structures are trimeric with each monomer having three transmembrane and one amphipathic helices. However, the solution NMR structure shows typical perturbations induced by a micelle environment that is reflected in the predicted solid-state NMR resonances from the structural coordinates. The crystal structures show few such perturbations, especially for the wild-type structure and especially for the monomers that do not have significant crystal contacts. For these monomers the predicted and observed data are nearly identical. The thermostabilized constructs do show more perturbations, especially the A41C mutation that introduces a hydrophilic residue into what would be the middle of the lipid bilayer inducing additional hydrogen bonding between trimers. These results demonstrate a general technique for validating membrane protein structures with minimal data obtained from membrane proteins in liquid crystalline lipid bilayers by oriented sample solid-state NMR.     

Characterization of protein fold by wide-angle X-ray solution scattering

Wide-angle X-ray solution scattering (WAXS) patterns contain substantial information about the three-dimensional structure of a protein. Although WAXS data have far less information than is required for determination of a full three-dimensional structure, the actual amount of information contained in a WAXS pattern has not been carefully quantified. Here we carry out an analysis of the amount of information that can be extracted from a WAXS pattern and demonstrate that it is adequate to estimate the secondary-structure content of a protein and to strongly limit its possible tertiary structures. WAXS patterns computed from the atomic coordinates of a set of 498 protein domains representing all of known fold space were used as the basis for constructing a multidimensional space of all corresponding WAXS patterns (‘WAXS space’). Within WAXS space, each scattering pattern is represented by a single vector. A principal components analysis was carried out to identify those directions in WAXS space that provide the greatest discrimination among patterns. The number of dimensions that provide significant discrimination among protein folds agrees well with the number of independent parameters estimated from a naïve Shannon sampling theorem approach. Estimates of the relative abundances of secondary structures were made using training/test sets derived from this data set. The average error in the estimate of α-helical content was 11%, and of β-sheet content was 9%. The distribution of proteins that are members of the four structure classes, α, β, α/β and α+β, are well separated in WAXS space when data extending to a spacing of 2.2 Å are used. Quantification of the information embedded within a WAXS pattern indicates that these data can be used as a powerful constraint in homology modeling of protein structures.     

De novo protein structure determination using sparse NMR data

We describe a method for generating moderate to high-resolution protein structures using limited NMR data combined with the ab initio protein structure prediction method Rosetta. Peptide fragments are selected from proteins of known structure based on sequence similarity and consistency with chemical shift and NOE data. Models are built from these fragments by minimizing an energy function that favors hydrophobic burial, strand pairing, and satisfaction of NOE constraints. Models generated using this procedure with 1 NOE constraint per residue are in some cases closer to the corresponding X-ray structures than the published NMR solution structures. The method requires only the sparse constraints available during initial stages of NMR structure determination, and thus holds promise for increasing the speed with which protein solution structures can be determined.     

Determination of protein oligomeric structure from small‐angle X‐ray scattering

Small‐angle X‐ray scattering (SAXS) is useful for determining the oligomeric states and quaternary structures of proteins in solution. The average molecular mass in solution can be calculated directly from a single SAXS curve collected on an arbitrary scale from a sample of unknown protein concentration without the need for beamline calibration or protein standards. The quaternary structure in solution can be deduced by comparing the experimental SAXS curve to theoretical curves calculated from proposed models of the oligomer. This approach is especially robust when the crystal structure of the target protein is known, and the candidate oligomer models are derived from the crystal lattice. When SAXS data are obtained at multiple protein concentrations, this analysis can provide insight into dynamic self‐association equilibria. Herein, we summarize the computational methods that are used to determine protein molecular mass and quaternary structure from SAXS data. These methods are organized into a workflow and demonstrated with four case studies using experimental SAXS data from the published literature.     

Oligopeptide-mediated acceleration of amyloid fibril formation of amyloid beta(Abeta) and alpha-synuclein fragment peptide (NAC).

The effects of oligopeptides on the secondary structures of Abeta and NAC, a fragment of alpha-synuclein protein, were studied by circular dichroism (CD) spectra. The effects of oligopeptides on the amyloid fibril formation were also studied by fluorescence spectra due to thioflavine-T. The oligopeptides were composed of a fragment of Abeta or NAC and were interposed by acidic or basic amino acid residues. The peptide, Ac-ELVFFAKK-NH2, which involved a fragment Leu-Val-Phe-Phe-Ala at Abeta(17-21), had no effect on the secondary structures of Abeta(1-28) in 60% or 90% trifluoroethanol (TFE) solutions at both pH 3.2 and pH 7.2. However, it showed pronounced effects on the secondary structure of Abeta(1-28) at pH 5.4. The Ac-ELVFFAKK-NH2 reduced the alpha-helical content, while it increased the beta-sheet content of Abeta(1-28). In phosphate buffer solutions at pH 7.0, Ac-ELVFFAKK-NH2 had little effect on the secondary structures of Abeta(1-28). However, it accelerated amyloid fibril formation when monitored by fluorescence spectra due to thioflavine-T. On the other hand, LPFFD, a peptide known as a beta-sheet breaker, caused neither an appreciable extent of change in the secondary structure nor amyloid fibril formation in the same buffer solution. The peptide, Ac-ETVK-NH2, which involved a fragment Thr-Val at NAC(21-22), had no effect on the secondary structure of NAC in 90% TFE and in isotonic phosphate buffer. However, Ac-ETVK-NH2 in water with small amounts of NaN3 and hexafluoroisopropanol greatly increased the beta-sheet content of NAC after standing the solution for more than 1 week. Interestingly, in this solution. Ac-ETVK-NH2, accelerated the fibril formation of NAC. It was concluded that an oligopeptide that involves a fragment of amyloidogenic proteins could be a trigger for the formation of amyloid plaques of the proteins even when it had little effect on the secondary structures of the proteins as monitored by CD spectra for a short incubation time.     

The thermodynamics of water-protein interactions

Information about the effects of water on protein structure and function can be obtained from studies on freeze dried protein powders of varying water content. Sorption isotherms of water on proteins can be used to obtain thermodynamic quantities for water-protein interactions. Since such isotherms show hysteresis, there is doubt in regard to their interpretation.General expressions for the thermodynamic quantities of sorption are derived. If isotherms represent data at equilibrium, it is possible to calculate these thermodynamic quantities.There are two types of hysteresis, non-equilibrium hysteresis and equilibrium hysteresis. Absorption and desorption isotherms can show equilibrium hysteresis if different protein conformations, which are only slowly interconvertible, can be present. In this case valid thermodynamic quantities can be obtained. Experimental tests for equilibrium hysteresis are presented. More experiments are needed before definite conclusions can be drawn in regard to isotherms in the literature.If the protein conformation in a protein powder is similar to the protein conformation in aqueous solution, equilibrium data obtained from sorption isotherms can be used to approximate thermodynamic quantities for the interaction of water with proteins in aqueous solution. Examination of what experimental evidence is available indicates that the protein in powders prepared by desorption of water should have a conformation similar to that in solution. Further study of such samples will help to clarify the thermodynamics of water-protein interactions in aqueous solution.     

New developments in protein structure-function analysis by MS and use of hydrogen-deuterium exchange microfluidics

The study of protein structure and function has evolved to become a leading discipline in the biophysical sciences. Although it is not yet possible to determine 3D protein structures from MS data alone, multiple MS-based techniques can be combined to obtain structural and functional data that are complementary to classical protein structure information obtained from NMR or X-ray crystallography. Monitoring gas-phase interactions of noncovalent complexes yields information on binding constants, complex stability, and the nature of interactions. Ion mobility MS and chemical crosslinking strategies can be applied to probe the architecture of macromolecular assemblies and protein-ligand complexes. MS analysis of hydrogen-deuterium exchange can be used to determine the localization of secondary structure elements, binding sites and conformational dynamics of proteins in solution. This minireview focuses first on new strategies that combine these techniques to gain insights into protein structure and function. Using one such strategy, we then demonstrate how a novel hydrogen-deuterium exchange microfluidics tool can be used online with an ESI mass spectrometer to monitor regional accessibility in a peptide, as exemplified with amyloid-β peptide 1-40.     

A mathematical framework for protein structure comparison

Comparison of protein structures is important for revealing the evolutionary relationship among proteins, predicting protein functions and predicting protein structures. Many methods have been developed in the past to align two or multiple protein structures. Despite the importance of this problem, rigorous mathematical or statistical frameworks have seldom been pursued for general protein structure comparison. One notable issue in this field is that with many different distances used to measure the similarity between protein structures, none of them are proper distances when protein structures of different sequences are compared. Statistical approaches based on those non-proper distances or similarity scores as random variables are thus not mathematically rigorous. In this work, we develop a mathematical framework for protein structure comparison by treating protein structures as three-dimensional curves. Using an elastic Riemannian metric on spaces of curves, geodesic distance, a proper distance on spaces of curves, can be computed for any two protein structures. In this framework, protein structures can be treated as random variables on the shape manifold, and means and covariance can be computed for populations of protein structures. Furthermore, these moments can be used to build Gaussian-type probability distributions of protein structures for use in hypothesis testing. The covariance of a population of protein structures can reveal the population-specific variations and be helpful in improving structure classification. With curves representing protein structures, the matching is performed using elastic shape analysis of curves, which can effectively model conformational changes and insertions/deletions. We show that our method performs comparably with commonly used methods in protein structure classification on a large manually annotated data set.     

Addition of missing loops and domains to protein models by x-ray solution scattering

Inherent flexibility and conformational heterogeneity in proteins can often result in the absence of loops and even entire domains in structures determined by x-ray crystallographic or NMR methods. X-ray solution scattering offers the possibility of obtaining complementary information regarding the structures of these disordered protein regions. Methods are presented for adding missing loops or domains by fixing a known structure and building the unknown regions to fit the experimental scattering data obtained from the entire particle. Simulated annealing was used to minimize a scoring function containing the discrepancy between the experimental and calculated patterns and the relevant penalty terms. In low-resolution models where interface location between known and unknown parts is not available, a gas of dummy residues represents the missing domain. In high-resolution models where the interface is known, loops or domains are represented as interconnected chains (or ensembles of residues with spring forces between the C(alpha) atoms), attached to known position(s) in the available structure. Native-like folds of missing fragments can be obtained by imposing residue-specific constraints. After validation in simulated examples, the methods have been applied to add missing loops or domains to several proteins where partial structures were available.     

Investigation of the utility of selective methyl protonation for determination of membrane protein structures

Polytopic alpha-helical membrane proteins present one of the final frontiers for protein structural biology, with significant challenges causing severe under-representation in the protein structure databank. However, with the advent of hardware and methodology geared to the study of large molecular weight complexes, solution NMR is being increasingly considered as a tool for structural studies of these types of membrane proteins. One method that has the potential to facilitate these studies utilizes uniformly deuterated samples with protons reintroduced at one or two methyl groups of leucine, valine and isoleucine. In this work we demonstrate that in spite of the increased proportion of these amino acids in membrane proteins, the quality of structures that can be obtained from this strategy is similar to that obtained for all alpha-helical water soluble proteins. This is partly attributed to the observation that NOEs between residues within the transmembrane helix did not have an impact on structure quality. Instead the most important factors controlling structure accuracy were the strength of dihedral angle restraints imposed and the number of unique inter-helical pairs of residues constrained by NOEs. Overall these results suggest that the most accurate structures will arise from accurate identification of helical segments and utilization of inter-helical distance restraints from various sources to maximize the distribution of long-range restraints.     

An evaluation of the combined use of nuclear magnetic resonance and distance geometry for the determination of protein conformations in solution

An evaluation of the potential of nuclear magnetic resonance (n.m.r.) as a means of determining polypeptide conformation in solution is performed with the aid of a new distance geometry program which is capable of computing complete spatial structures for small proteins from n.m.r. data. Ten sets of geometric constraints which simulate the results available from n.m.r. experiments of varying precision and completeness were extracted from the crystal structure of the basic pancreatic trypsin inhibitor, and conformers consistent with these constraints were computed. Comparison of these computed structures with each other and with the original crystal structure shows that it is possible to determine the global conformation of a polypeptide chain from the distance constraints which are available from n.m.r. experiments. The results obtained with the different data sets also provide a standard by which the quality of protein structures computed from n.m.r. data can be evaluated when no crystal structure is available, and indicate directions in which n.m.r. experiments for protein structure determination could be further improved.     

The secondary structure of gap junctions. Influence of isolation methods and proteolysis.

Paired intercellular transmembrane channels, termed connexons, comprised of hexameric assemblies of gap junction protein, were isolated and purified from rat liver by exploiting their resistance to either Sarkosyl detergent solubilization or alkali extraction. The secondary structures of the gap junction proteins prepared by these methods were compared by circular dichroism (CD) spectroscopy. Both the spectra and the calculated net secondary structures of the proteins obtained by the two isolation methods were different. The protein isolated by the Sarkosyl treatment was found to be approximately 50% alpha-helical, while protein isolated by alkali extraction had a lower helix content (approximately 40%). In both types of preparations, however, the helical content of the gap junction protein was sufficiently large to be consistent with an all-helical model for the membrane-spanning parts of the structure. CD spectroscopy was also used to examine the effects of proteolytic digestion of the cytoplasmic domain on the net secondary structure of the detergent-treated gap junction protein. The membrane-bound fragments had a slightly higher proportion of their residues that were alpha-helical in nature, suggesting that the transmembrane and/or intra-gap domains are indeed enriched in this type of secondary structure. This information constrains the range of models which can be realistically proposed for the channel structure.     

Proteomic analysis of different fractions in M. tuberculosis culture]

To provide a basis of molecular genetic analysis of M. tubereulosis, the proteomic profiling was prompted. M. tuberculosis H37RV was cultured in Sauton medium at 37 degrees C for 3 weeks, harvested and fractionated into three portions: suspension filtration proteins(A), cytosol proteins(B) and membrane proteins(C). These fractions were analyzed by pH3-10 IPG gradient and SDS-PAGE. The silver-stained technigue and gel images were used. Then the image was transfered into 2-DE gel analysis Software. A part of protein sports of expression level higher from the culture filtrate fraction were identified by peptide mass fingerprinting. A total of 907, 884 and 681 protein sports were observed for A. B. C fractions in M. tuberculosis H37RV, respectively. Distribution of proteins mass for 3 fractions were principally similar, About 70.5-74.4 per cent were distributed in the ranges of Mr 10-49 kD.pI of the proteins for A, B fractions were pricipally similar, About 80.9-83.5 per cent were distributed in the ranges of pH 3.0-6.4, But the number of protein sports for C fraction distributed in the ranges of pH 7.6-10.0 were more than A, B fractions. The number of protein sports of expression level higher for A, B and C fractions were 71(7.8%), 242(27.4%), 19 (2.8%), respectively. 90 pen cent from them, pH of the proteins were distributed in the ranges of pH 3.0-6.4. 73.1 per cent for proteins mass of C fraction were distributed in the ranges of 10 kD-49 kD, which were more than A, B fractions. Nine of the proteins identified ih this study appeared to be homology or putative fanction proteins, but another five proteins were unknown. The proteomic profiling of different fractions in M. tuberculosis obtained in here will be provide a basis for detailed analysis of biology functions of the proteins.     

Small-angle X-ray scattering constraints and local geometry like secondary structures can construct a coarse-grained protein model at amino acid residue resolution

We have developed a new methodology that determines protein structures using small-angle X-ray scattering (SAXS) data. The current bottlenecks in determining the protein structures require a new strategy using the simple design of an experiment, and SAXS is suitable for this purpose in spite of its low information content. First we demonstrated that SAXS constraints work additively to NMR-derived information in calculating structures. Next, structure calculations for nine proteins taking different folds were performed using the SAXS constraints combined with the NMR-derived distance restraints for local geometry such as secondary structures or those for tertiary structure. The results show that the SAXS constraints complemented the tertiary-structural information for all the proteins, and that accuracy of the structures thus obtained with SAXS constraints and local geometrical restraints ranged from 1.85 to 4.33 Å. Based on these results, we were able to construct a coarse-grained protein model at amino acid residue resolution.     

Enhanced analysis of human breast cancer proteomes using micro-scale solution isoelectrofocusing combined with high resolution 1-D and 2-D gels

Current methods for quantitatively comparing proteomes (protein profiling) have inadequate resolution and dynamic range for complex proteomes such as those from mammalian cells or tissues. More extensive profiling of complex proteomes would be obtained if the proteomes could be reproducibly divided into a moderate number of well-separated pools. But the utility of any prefractionation is dependent upon the resolution obtained because extensive cross contamination of many proteins among different pools would make quantitative comparisons impractical. The current study used a recently developed microscale solution isoelectrofocusing (musol-IEF) method to separate human breast cancer cell extracts into seven well-resolved pools. High resolution fractionation could be achieved in a series of small volume tandem chambers separated by thin acrylamide partitions containing covalently bound immobilines that establish discrete pH zones to separate proteins based upon their pIs. In contrast to analytical 2-D gels, this prefractionation method was capable of separating very large proteins (up to about 500 kDa) that could be subsequently profiled and quantitated using large-pore 1-D SDS gels. The pH 4.5-6.5 region was divided into four 0.5 pH unit ranges because this region had the greatest number of proteins. By using very narrow pH range fractions, sample amounts applied to narrow pH range 2-D gels could be increased to detect lower abundance proteins. Although 1.0 pH range 2-D gels were used in these experiments, further protein resolution should be feasible by using 2-D gels with pH ranges that are only slightly wider than the pH ranges of the musol-IEF fractions. By combining musol-IEF prefractionation with subsequent large pore 1-D SDS-PAGE (>100 kDa) and narrow range 2-D gels (<100 kDa), large proteins can be reliably quantitated, many more proteins can be resolved, and lower abundance proteins can be detected.     

Protein structures in solution by nuclear magnetic resonance and distance geometry. The polypeptide fold of the basic pancreatic trypsin inhibitor determined using two different algorithms, DISGEO and DISMAN

A set of conformational restraints derived from nuclear magnetic resonance (n.m.r.) measurements on solutions of the basic pancreatic trypsin inhibitor (BPTI) was used as input for distance geometry calculations with the programs DISGEO and DISMAN. Five structures obtained with each of these algorithms were systematically compared among themselves and with the crystal structure of BPTI. It is clear that the protein architecture observed in single crystals of BPTI is largely preserved in aqueous solution, with local structural differences mainly confined to the protein surface. The results confirm that protein conformations determined in solution by combined use of n.m.r. and distance geometry are a consequence of the experimental data and do not depend significantly on the algorithm used for the structure determination. The data obtained further provide an illustration that long intramolecular distances in proteins, which are comparable with the radius of gyration, are defined with high precision by relatively imprecise nuclear Overhauser enhancement measurements of a large number of much shorter distances.     

Validation of helical tilt angles in the solution NMR structure of the Z domain of Staphylococcal protein A by combined analysis of residual dipolar coupling and NOE data

Staphylococcal protein A (SpA) is a virulence factor from Staphylococcus aureus that is able to bind to immunoglobulins. The 3D structures of its immunoglobulin (Ig) binding domains have been extensively studied by NMR and X-ray crystallography, and are often used as model structures in developing de novo or ab initio strategies for predicting protein structure. These small three-helix-bundle structures, reported in free proteins or Ig-bound complexes, have been determined previously using medium- to high-resolution data. Although the location and relative orientation of the three helices in most of these published 3D domain structures are consistent, there are significant differences among the reported structures regarding the tilt angle of the first helix (helix 1). We have applied residual dipolar coupling data, together with nuclear Overhauser enhancement and scalar coupling data, in refining the NMR solution structure of an engineered IgG-binding domain (Z domain) of SpA. Our results demonstrate that the three helices are almost perfectly antiparallel in orientation, with the first helix tilting slightly away from the other two helices. We propose that this high-accuracy structure of the Z domain of SpA is a more suitable target for theoretical predictions of the free domain structure than previously published lower-accuracy structures of protein A domains.     

Crystal structures and electron micrographs of fungal volvatoxin A2

Membrane adhesion and insertion of protein are essential to all organisms, but the underlying mechanisms remain largely unknown. Membrane pore-forming toxins (PFTs) are potential model systems for studying these mechanisms. We have determined the crystal structures of volvatoxin A2 (VVA2), a fungal PFT from Volvariella volvacea, using Br-multiple-wavelength anomalous diffraction (MAD). The VVA2 structures obtained at pH 4.6, pH 5.5 and pH 6.5 were refined to resolutions of 1.42 A, 2.6 A and 3.2 A, respectively. The structures reveal that the VVA2 monomer contains a single alpha/beta domain. Most of the VVA2 surface is occupied by its oligomerization motif and two putative heparin-binding motifs. Residues Ala91 to Ala101 display several conformations at different pH values, which might be under the control of His87. We also found that the shape of one putative heparin-binding motif in VVA2 appears similar to those found in fibroblast growth factors, and the other one displays a linear polypeptide. Our results suggest several possible intermediates of protein assembly in solution and protein adhering to cell membranes before conformational changes. The electron micrographs of VVA2 molecules in solution, at a protein concentration of 1 microg ml(-1), show that they can assemble into filament-like or braid-like oligomers in a pH-dependent way. In addition, the arc-shaped VVA2 structure obtained at pH 6.5 suggests that VVA2 could form a two-layered helical oligomer with 18 subunits per turn. The structures presented here could be used to elucidate the pore-formation mechanisms of VVA2 and its structural neighbors, Cyt toxins from Bacillus thuringiensis.