Molecular and crystal structures of chitosan/HI type I salt determined by X-ray fiber diffraction

The three-dimensional structure of chitosan/HI type I salt was determined by the X-ray fiber diffraction technique and linked-atom least-squares refinement method. Two polymer chains and four iodide ions (I(-)) crystallized in a monoclinic unit cell with dimensions a = 9.46(2), b = 9.79(2)], c (fiber axis)=10.33(2)A, beta = 105.2(2) degrees and a space group P2(1). Chitosan chains adopted an extended twofold helical conformation that was stabilized by O-3...O-5 hydrogen bonds, and the O-6 atom adopted nearly gt orientation. Polymer chains zigzag along the b-axis and directly connect to each other by N-2...O-6 hydrogen bonds. Two columns of iodide ions were shown to pack at the bending points of the zigzag sheets, and their locations are closely related to those of water columns in the hydrated chitosan. The iodide ions stabilized the salt structure by forming hydrogen bonds with the N-2 and O-6 atoms of the polymer chains together with an electrostatic interaction between N-2 and the iodide ions.     

Plausible molecular and crystal structures of chitosan/HI type II salt

Chitosan/HI type II salt prepared from crab tendon was investigated by X-ray fiber diffraction. Two polymer chains and 16 iodide ions (I(-)) crystallized in a tetragonal unit cell with lattice parameters of a = b = 10.68(3), c (fiber axis) = 40.77(13) A, and a space group P4(1). Chitosan forms a fourfold helix with a 40.77 A fiber period having a disaccharide as the helical asymmetric unit. One of the O-3... O-5 intramolecular hydrogen bonds at the glycosidic linkage is weakened by interacting with iodide ions, which seems to cause the polymer to take the 4/1-helical symmetry rather than the extended 2/1-helix. The plausible orientations of two O-6 atoms in the helical asymmetric unit were found to be gt and gg. Two chains are running through at the corner and the center of the unit cell along the c-axis. They are linked by hydrogen bonds between N-21 and O-61 atoms. Two out of four independent iodide ions are packed between the corner chains while the other two are packed between the corner and center chains when viewing through the ab-plane. The crystal structure of the salt is stabilized by hydrogen bonds between these iodide ions and N-21, N-22, O-32, O-61, O-62 of the polymer chains.     

The crystal structure of the alpha-cellobiose.2 NaI.2 H(2)O complex in the context of related structures and conformational analysis

The crystal structure of beta-D-glucopyranosyl-(1-->4)-alpha-D-glucopyranose (alpha-cellobiose) in a complex with water and NaI was determined with Mo K(alpha) radiation at 150 K to R=0.027. The space group is P2(1) and unit cell dimensions are a=9.0188, b=12.2536, c=10.9016 A, beta=97.162 degrees. There are no direct hydrogen bonds among cellobiose molecules, and the usual intramolecular hydrogen bond between O-3 and O-5' is replaced by a bridge involving Na+, O-3, O-5', and O-6'. Both Na+ have sixfold coordination. One I(-) accepts six donor hydroxyl groups and three C-H***I(-) hydrogen bonds. The other accepts three hydroxyls, one Na+, and five C-H***I(-) hydrogen bonds. Linkage torsion angles phi(O-5) and psi(C-5) are -73.6 and -105.3 degrees, respectively (phi(H)=47.1 degrees and psi(H)=14.6 degrees ), probably induced by the Na+ bridge. This conformation is in a separate cluster in phi,psi space from most similar linkages. Both C-6-O-H and C-6'-O-H are gg, while the C-6'-O-H groups from molecules not in the cluster have gt conformations. Hybrid molecular mechanics/quantum mechanics calculations show <1.2 kcal/mol strain for any of the small-molecule structures. Extrapolation of the NaI cellobiose geometry to a cellulose molecule gives a left-handed helix with 2.9 residues per turn. The energy map and small-molecule crystal structures imply that cellulose helices having 2.5 and 3.0 residues per turn are left-handed.     

Conformational features of crystal-surface cellulose from higher plants

Native cellulose in higher plants forms crystalline fibrils a few nm across, with a substantial fraction of their glucan chains at the surface. The accepted crystal structures feature a flat-ribbon 21 helical chain conformation with every glucose residue locked to the next by hydrogen bonds from O-3' to O-5 and from O-2 to O-6'. Using solid-state NMR spectroscopy we show that the surface chains have a different C-6 conformation so that O-6 is not in the correct position for the hydrogen bond from O-2. We also present evidence consistent with a model in which alternate glucosyl residues are transiently or permanently twisted away from the flat-ribbon conformation of the chain, weakening the O-3' - 0-5 hydrogen bond. Previous molecular modelling and the modelling studies reported here indicate that this 'translational' chain conformation is energetically feasible and does not preclude binding of the surface chains to the interior chains, because the surface chains share the axial repeat distance of the 21 helix. Reduced intramolecular hydrogen bonding allows the surface chains to form more hydrogen bonds to external molecules in textiles, wood, paper and the living plant.     

Molecular and crystal structure of konjac glucomannan in the mannan II polymorphic form.

A probable crystal structure of konjac glucomannan (mannose:glucose ratio = 1.6) is proposed based on X-ray data and constrained linked-atom least-squares model refinement. The structure crystallizes in the mannan II polymorphic form, in an orthorhombic unit-cell with a = 9.01 A, b = 16.73 A, c (fiber axis) = 10.40 A, and a probable space group I222. The backbone conformation of the chain is a two-fold helix stabilized by intramolecular O-3-O-5' hydrogen bonds, with the O-6 rotational position gt. The unit cell contains four chains with antiparallel packing polarity and eight water molecules which reside in crystallographic positions. Intermolecular hydrogen bonds occur exclusively between chains and water molecules, establishing a three-dimensional hydrogen-bond network in the crystal structure. The glucose residues replace mannoses in the structure in isomorphous fashion, although some disorder appears possible. A structure having alternating gg-gt O-6 rotational positions and conforming to space group P222 appears to describe the disorder regions of the crystal. The reliability of the structure analysis is indicated by the X-ray residuals R = 0.276 and R" = 0.223.     

Proteolytically induced variations in the enzymatic properties of tissue plasminogen activator. Activations, inactivations and reactivations

Tissue plasminogen activator was treated with Sepharose-bound trypsin or chymotrypsin. Trypsin rapidly converted the one-chain activator to the two-chain form. This caused a marked increase in the amidolytic activity, while plasminogen activation initially increased but then decreased again. SDS/polyacrylamide gel electrophoresis in combination with [3H]diisopropylfluorophosphate active-site labeling revealed that after the conversion to the two-chain activator a minor cleavage occurred in the B chain, while the A chain was substantially degraded. Chymotrypsin caused a marked decrease in both amidolytic activity and plasminogen activation. SDS/polyacrylamide gel electrophoresis under reducing conditions revealed that two pairs of new bands had appeared, with Mr or about 50,000/52,000 and 17,000/20,000 respectively. N-terminal sequence analysis identified cleavage sites at peptide bonds 420-421 and 423-424. These bonds are located in a region of the activator which is homologues to the segments of trypsin and chymotrypsin, where autocatalytic cleavages occur during their activations. However, treatment of two-chain activator with chymotrypsin had markedly less effect on plasminogen activation and amidolytic activity. By treatment of samples of chymotrypsin-digested one-chain activator with plasmin, amidolytic activity could be largely restored. Thus, chymotrypsin may, by cleaving bonds 420-421 and 423-424, convert the active one-chain activator into an 'inactive' zymogen, which is again 'activated' by plasmin cleavage.     

Characterization of a modified human tissue plasminogen activator comprising a kringle-2 and a protease domain

To study structure/function relationships of tissue plasminogen activator (t-PA) activity, one of the simplest modified t-PA structures to activate plasminogen in a fibrin-dependent manner was obtained by constructing an expression vector that deleted amino acid residues 4-175 from the full-length sequence of t-PA. The expression plasmid was introduced into a Syrian hamster cell line, and stable recombinant transformants, producing high levels of the modified plasminogen activator, were isolated. The resulting molecule, mt-PA-6, comprising the second kringle and serine protease domains of t-PA, produced a doublet of plasminogen activator activity having molecular masses of 40 and 42 kDa. The one-chain mt-PA-6 produced by cultured Syrian hamster cells was purified in high yield by affinity and size exclusion chromatography. The purified mt-PA-6 displayed the same two types of microheterogeneity observed for t-PA. NH2-terminal amino acid sequencing demonstrated that one-chain mt-PA-6 existed in both a GAR and a des-GAR form. Purified mt-PA-6 also existed in two glycosylation forms that accounted for the 40- and 42-kDa doublet of activity produced by the cultured Syrian hamster cells. Separation of these two forms by hydrophobic interaction chromatography and subsequent tryptic peptide mapping demonstrated that both forms contained N-linked glycosylation at Asn448; in addition, some mt-PA-6 molecules were also glycosylated at Asn184. Plasmin treatment of one-chain mt-PA-6 converted it to a two-chain molecule by cleavage of the Arg275-Ile276 bond. This two-chain mt-PA-6, like t-PA, had increased amidolytic activity. The fibrinolytic specific activities of the one- and two-chain forms of mt-PA-6 were similar and twice that of t-PA. The plasminogen activator activity of one-chain mt-PA-6 was enhanced greater than 80-fold by CNBr fragments of fibrinogen, and the one-chain enzyme lysed human clots in vitro in a dose-dependent manner. The ability to produce and purify a structurally simple plasminogen activator with desirable fibrinolytic properties may aid in the development of a superior thrombolytic agent for the treatment of acute myocardial infarction.     

Isolation and chemical characterization of two structurally and functionally distinct forms of botrocetin, the platelet coagglutinin isolated from the venom of Bothrops jararaca

Two distinct forms of botrocetin, the von Willebrand factor (vWF)-dependent platelet coagglutinin isolated from the venom of the snake Bothrops jararaca, were purified and characterized structurally and functionally. The apparent molecular mass of the one-chain botrocetin was 28 kDa before and 32 kDa after reduction of disulfide bonds, while that of the two-chain botrocetin was 27 kDa before and 15/14.5 kDa after reduction. Amino acid composition of the two species revealed a similar high content of potentially acidic residues (greater than 60 Asx and Glx residues/molecule) but significant differences in the content of Cys and Phe residues. The NH2-terminal sequence of the one-chain botrocetin was Ile-Ile/Val-Ser-Pro-Pro-Val-Cys-Gly-Asn-Glu-. Two constituent polypeptides of the two-chain botrocetin showed similar but different NH2-terminal sequences, distinct from that of the one-chain species: (alpha) Asp-Cys-Pro-Ser-Gly-Trp-Ser-Ser-Tyr-Glu- and (beta) Asp-Cys-Pro-Pro-Asp-Trp-Ser-Ser-Tyr-Glu-. The carbohydrate content of both species was less than 2% of the total mass, and the pI was 4.0-4.1 for the one-chain species, and 4.6, 5.3-5.4, and 7.7-7.8 for the two-chain species. No free sulfhydryl group was detected in each species. Both types of botrocetin were resistant to proteolysis at neutral pH. Incubation of 125I-labeled one-chain botrocetin with the crude venom solution resulted in no detectable structural change. On a weight basis, the two-chain botrocetin was 34 times more active than the one-chain form in promoting vWF binding to platelets.(ABSTRACT TRUNCATED AT 250 WORDS)     

Transmembrane domain interactions and residue proline 378 are essential for proper structure, especially disulfide bond formation, in the human vitamin K-dependent gamma-glutamyl carboxylase

We used recombinant techniques to create a two-chain form (residues 1-345 and residues 346-758) of the vitamin K-dependent gamma-glutamyl carboxylase, a glycoprotein located in the endoplasmic reticulum containing five transmembrane domains. The two-chain carboxylase had carboxylase and epoxidase activities similar to those of one-chain carboxylase. In addition, it had normal affinity for the propeptide of factor IX. We employed this molecule to investigate formation of the one disulfide bond in carboxylase, the transmembrane structure of carboxylase, and the potential interactions among the carboxylase's transmembrane domains. Our results indicate that the two peptides of the two-chain carboxylase are joined by a disulfide bond. Proline 378 is important for the structure necessary for disulfide formation. Results with the P378L carboxylase indicate that noncovalent bonds maintain the two-chain structure even when the disulfide bond is disrupted. As we had previously proposed, the fifth transmembrane domain of carboxylase is the last and only transmembrane domain in the C-terminal peptide of the two-chain carboxylase. We show that the noncovalent association between the two chains of carboxylase involves an interaction between the fifth transmembrane domain and the second transmembrane domain. Results of a homology model of transmembrane domains 2 and 5 suggest that not only do these two domains associate but that transmembrane domain 2 may interact with another transmembrane domain. This latter interaction may be mediated at least in part by a motif of glycine residues in the second transmembrane domain.     

Inactive proenzyme to tissue-type plasminogen activator from human melanoma cells, identified after affinity purification with a monoclonal antibody

The human 66 000 mol. wt. plasminogen activator (HPA66; tissue-type plasminogen activator) has been purified from melanoma cells by a one-step affinity method with a monoclonal antibody. HPA66 purified in this way consists mainly of a one-polypeptide chain form with small amounts (15%) of a form containing two polypeptide chains held together by one or more disulphide bridges. The one-chain form was converted to the two-chain form by catalytic amounts of plasmin. During the conversion, the enzyme activity of HPA66, as measured by an [125I]plasminogen conversion assay and with a chromogenic substrate, increased linearly with the percentage of the two-chain form. A linear regression analysis showed that all enzyme activity could be accounted for by the two-chain form, while the one-chain form had no measurable enzyme activity (detection limit approximately 5% of the activity of the two-chain form). Together with previous findings of inactive proenzymes to murine and human approximately 50 000 mol. wt. (urokinase-type) plasminogen activators, these findings indicate that plasminogen activators are generally formed from inactive one-chain proenzymes which are converted to active two-chain enzymes by limited proteolysis, thus demonstrating a third step in a cascade reaction leading to extracellular proteolysis.     

A single-step separation of the one- and two-chain forms of tissue plasminogen activator

Preparations of one-chain tissue plasminogen activator (tPA), usually a mixture of 65- and 63-kDa differentially glycosylated forms, contain variable amounts of two-chain tPA. There is no effective procedure currently available for removal of the two-chain contaminant from one-chain tPA preparations. In this report, affinity chromatography on benzamidine-Sepharose was investigated for the separation of two-chain from one-chain tPA. Activase, a preparation of recombinant tPA containing 80% one-chain tPA, a mixture of 65- and 63-kDa variants, and 20% two-chain tPA, was applied to a column of benzamidine-Sepharose, equilibrated with 1 M ammonium bicarbonate. Under this condition, both one-chain and two-chain forms of tPA were adsorbed by the column. Addition of 0.1 M arginine to the equilibration buffer led to elution of two-peaks, corresponding to the 65- and 63-kDa variants of one-chain tPA. Two-chain tPA remained bound to the column, but could be eluted with sodium acetate buffer, pH 4.0, containing 0.1 M arginine. The present procedure allows rapid and effective removal of two-chain tPA with concomitant separation of 65- and 63-kDa one-chain glycoforms from preparations of one-chain tPA. Kinetic analysis for the hydrolysis of D-Ile-Pro-Arg-p-nitroanilide (S-2288) by the highly purified molecular forms of tPA suggests that 63-kDa one-chain tPA possesses 30% higher catalytic efficiency than the 65-kDa variant, while two-chain tPA is 9- or 12-fold more efficient than 63- or 65-kDa one-chain tPA, respectively.     

X-ray crystal structure of galabiose, O-alpha-D-galactopyranosyl-(1---4)-D-galactopyranose

O-alpha-D-Galactopyranosyl-(1---4)-D-galactopyranose, C12H22O11, Mr = 342.30, crystallises in the orthorhombic space group P2(1)2(1)2(1), and has alpha = 5.826(1), b = 13.904(3), c = 17.772(4) A, Z = 4, and Dx = 1.579 g.cm-3. Intensity data were collected with a CAD4 diffractometer. The structure was solved by direct methods and refined to R = 0.063 and Rw = 0.084 for 2758 independent reflections. The glycosidic linkage is of the type 1-axial-4-axial with torsion angles phi O-5' (O-5'-C-1'-O-1'-C-4) = 98.1(2) degrees, psi C-3 (C-3-C-4-O-1'-C-1') = -81.9(3) degrees, phi H (H-1'-C-1'-O-1'-C-4) = -18 degrees, and psi H (H-4-C-4-O-1'-C-1') = 35 degrees. The conformation is stabilised by an O-3 . . . O-5' intramolecular hydrogen-bond with length 2.787(3) A and O-3-H . . . O-5' = 162 degrees. The glycosidic linkage causes a folding of the molecule with an angle of 117 degrees between the least-square planes through the pyranosidic rings. The crystal investigated contained 56(1)% of alpha- and 44(1)% of beta-galabiose as well as approximately 70% of the gauche-trans and approximately 30% of the trans-gauche conformers about the exocyclic C-5'-C-6' and C-5-C-6 bonds. The crystal packing is governed by hydrogen bonding that engages all oxygen atoms except the intramolecular acceptor O-5' and the glycosidic O-1' oxygen atoms.     

Effects of intact fibrin and partially plasmin-degraded fibrin on kinetic properties of one-chain tissue-type plasminogen activator

A comparative kinetic analysis of the enzymatic activities of one-chain and two-chain tissue-type plasminogen activator (t-PA) demonstrates that two-chain t-PA catalyzes the hydrolysis of the peptide substrate D-Val-Leu-Arg-pNA about 4-fold more effectively than one-chain t-PA. The difference is accounted for almost entirely by a corresponding difference is the kcat values of the enzymes, whereas the Km values are similar. The amidolytic activity of two-chain t-PA is not enhanced by intact or partially plasmin-degraded fibrin. In contrast, the activity of one-chain t-PA is stimulated up to 3.7-fold by intact fibrin and up to 4.7-fold by plasmin-degraded fibrin (fibrin X-fragment). The stimulatory effects are realized via increases in the kcat values. It appears thus that in the presence of fibrin the intrinsically inferior catalytic properties of one-chain t-PA become similar to the properties of two-chain t-PA. The dependency of the activity of one-chain t-PA on the concentration of fibrin monomer is consistent with a single association site of both proteins and an association constant of Kass = 6.25 x 10(6) l/mol. Stimulation of one-chain t-PA by plasmin-degraded fibrin is more complex and appears to involve two different binding sites with association constants of Kass = 0.67 x 10(9) l/mol and Kass = 3.85 x 10(6) l/mol, respectively. The stimulatory effects of fibrin and partially plasmin-degraded fibrin on one-chain t-PA are suppressed by epsilon-aminocaproic acid and by a monoclonal antibody directed against the lysine binding site of t-PA. The latter findings support the notion that fibrin activation of one-chain t-PA is mediated by the lysine binding site on kringel domains of the enzyme.     

Crystal structure of beta-cyclodextrin-benzoic acid inclusion complex

The inclusion complex of beta-cyclodextrin (beta-CD) with benzoic acid (BA) has been characterized crystallographically. Two beta-CDs cocrystallize with two BAs, 0.7 ethanol and 20.65 water molecules [2(C(6)H(10)O(5))(7).2(C(7)H(6)O(2)).0.7(C(2)H(6)O).20.65H(2)O] in the triclinic space group P1 with unit cell constants: a=15.210(1), b=15.678(1), c=15.687(1) A, alpha=89.13(1), beta=74.64(1), gamma=76.40(1) degrees. The anisotropic refinement of 1840 atomic parameters against 16,201 X-ray diffraction data converged at R=0.078. In the crystal lattice, beta-CD forms dimers stabilized by direct O-2(m)_1/O-3(m)_1...O-2(n)_2/O-3(n)_2 hydrogen bonds (intradimer) and by indirect O-6(m)_1...,O-6(n)_2 hydrogen bonds with one or two bridging water molecules joined in between (interdimer). These dimers are stacked like coins in a roll constructing endless channels where the guest molecules are included. The BA molecules protrude with their COOH groups at the beta-CD O-6-sides and are maintained in positions by hydrogen bonding to the surrounding O-6-H groups and water molecules. Water molecules (20.65) are distributed over 30 positions in the interstices between beta-CD molecules, except the water sites W-1, W-2 that are located in the channel of the beta-CD dimer. Water site W-2 is hydrogen bonded to the disordered ethanol molecule (occupancy 0.7).     

The crystal and molecular structures of cellulose I and II

The paper describes molecular dynamics (MD) simulations on the crystal structures of the Iβ and II phases of cellulose. Structural proposals for each of these were made in the 1970s on the basis of X-ray diffraction data. However, due to the limited resolution of these data some controversies remained and details on hydrogen bonding could not be directly obtained. In contrast to structure factor amplitudes in X-ray diffraction, energies, as obtained from MD simulations, are very sensitive to the positions of the hydroxyl hydrogen atoms. Therefore the latter technique is very suitable for obtaining such structural details. MD simulations of the Iβ phase clearly shows preference for one of the two possible models in which the chains are packed in a parallel orientation. Only the parallel-down mode (in the definition of Gardner and Blackwell (1974) J Biopolym 13: 1975-2001) presents a stable structure. The hydrogen bonding consists of two intramolecular hydrogen bonds parallel to the glycosidic linkage for both chains, and two intralayer hydrogen bonds. The layers are packed hydrophobically. All hydroxymethyl group are positioned in the tg conformation. For the cellulose II form it was found that, in contrast to what seemed to emerge from the X-ray fibre diffraction data, both independent chains had the gt conformation. This idea already existed because of elastic moduli calculations and 13C-solid state NMR data. Recently, the structure of cellotetraose was determined. There appear to be a striking similarity between the structure obtained from the MD simulations and this cellotetraose structure in terms of packing of the two independent molecules, the hydrogen bonding network and the conformations of the hydroxymethyl group, which were also gt for both molecules. The structure forms a 3D hydrogen bonded network, and the contribution from electrostatics to the packing is more pronounced than in case of the Iβ structure. In contrast to what is expected, in view of the irreversible transition of the cellulose I to II form, the energies of the Iβ form is found to be lower than that of II by 1 kcal mol-1 per cellobiose. This revised version was published online in November 2006 with corrections to the Cover Date.     

The effect of polymerised fibrin on the catalytic activities of one-chain tissue-type plasminogen activator as revealed by an analogue resistant to plasmin cleavage

A one-chain recombinant tissue-type plasminogen activator (EC 2.4.31.-) (tPA) analogue was constructed in which Arg-275 of the activation site was changed to Gly by site-directed mutagenesis. This analogue, tPA-Gly275, was very resistant to plasmin (EC 2.4.21.5) cleavage. It has been used to gain information about the activity of the uncleaved one-chain tPA form, also when plasmin is generated as a result of a plasminogen activation reaction. The amidolytic activity of tPA-Gly275 with less than Glu-Gly-Arg-pNA was investigated and compared to that of one-chain and two-chain wild-type recombinant tPA. A small but significant intrinsic amidolytic activity was observed with the analogue as well as the wild-type one-chain tPA form. However, it was much lower than that of two-chain tPA. Polymerised fibrin enhanced the amidolytic activity of both one-chain tPA forms but not of two-chain tPA. Measurements of the plasminogen activation kinetics in the absence of fibrin revealed that tPA-Gly275 possessed a significant intrinsic activity. However, it was 30-fold lower than that of two-chain tPA. Addition of polymerised fibrin profoundly enhanced the plasminogen activation rate of both tPA-Gly275 and wild-type one- and two-chain tPA to approximately the same maximal level. The results were interpreted to mean that fibrin binding can induce an activated state of the intact tPA one-chain form.     

Polysaccharide structures from powder diffraction data: molecular models of arabinan

X-ray intensity data from a polycrystalline sample of debranched arabinan, [-->5)-alpha-L-Ara(f)-(1-->](n), have been obtained using a powder diffractometer in order to determine its three-dimensional structure. The observed peaks index on a monoclinic cell with a=5.444(7), b=6.395(10), c=8.680(5) A, and gamma=99.6(3) degrees , V=298 A3. One 2-fold helix along the c-axis can be accommodated in the unit cell. Molecular and packing models have been analyzed using the seven C-2'-endo/C-3'-endo allomorphs originally proposed by Radha and Chandrasekaran [Carbohydr. Res. 1997, 298, 105]. The generated powder pattern matches closely with the observed diffraction only for one C-2'-endo model. In this structure, the three main chain conformation angles are in the trans domains, there are no intra-chain hydrogen bonds, and the packing arrangement is stabilized by inter-chain O-3-H...O-2 bonds.     

Reactivity with legume lectins of three monoclonal antibodies made against the Lathyrus odoratus lectin

Three murine IgG1 monoclonal antibodies (MoAb) were produced against the glucose/mannose-specific two-chain mitogen from seeds of Lathyrus odoratus (sweet pea) belonging to the Vicieae tribe of the Leguminosae family. Their antigenic specificities were tested against subunits of two-chain and one-chain legume lectins separated by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and electrotransferred to nitrocellulose filters. Different binding to native and detergent-treated lectins in dot-blots indicated that two of the antibodies bound to conformational epitopes which by immunoblotting were shown to be expressed on the heavy subunits from all the five tested two-chain lectins and on the six one-chain lectins, including PHA (Phaseolus vulgaris) and Con A (Canavalia ensiformis). However, ELISA cross-inhibition studies showed that these two antibodies bound to different epitopes on the lectin molecules. The third MoAb reacted with a continuous epitope not revealed by classical taxonomy since only three of five heavy subunits of the two-chain lectins stained with the antibody. Comparison of the known amino-acid sequences of the chains indicates eight positions as possible binding sites for this antibody.     

Molecular and crystal structures of N-arylglycopyranosylamines formed by reaction between sulfanilamide and D-ribose, D-arabinose and D-mannose

The X-ray crystal structures of three monosaccharide derivatives prepared by the reaction of sulfanilamide with D-ribose, D-arabinose, and D-mannose have been determined. The derivatives are N-(p-sulfamoylphenyl)-alpha-D-ribopyranosylamine (1), N-(p-sulfamoylphenyl)-alpha-D-arabinopyranosylamine (2), and N-(p-sulfamoylphenyl)-beta-D-mannopyranosylamine monohydrate (3). The monosaccharide ring of 1 and 2 has the 1C4 conformation, stabilized in 1 by an intramolecular hydrogen bond from 0-2 to 0-4. Compound 3 has the 4C1 conformation at the monosaccharide ring and the gt conformation at the C-6-O-6 side chain. Occupancy of the water molecule in the crystal of 3 actually examined was 22%. The degree of interaction between sulfamoyl groups and monosaccharide moieties varies from structure to structure. The packing arrangement of 2 involves hydrogen bonding between sulfamoyl groups and monosaccharide hydroxyl groups, but interactions of this type are fewer in 1, and in 3 the hydrogen bonds are either strictly between monosaccharide hydroxyl groups or strictly between sulfamoyl groups. Pairs of hydrogen bonds (two-point contacts) link neighboring molecules in all three structures, between screw-axially related molecules in 1 and 2 and between translationally related molecules in 3. The contact in 3 defined by the O-3-H...O-5 and O-6-H...O-4 hydrogen bonds is found in several other N-aryl-beta-D-mannopyranosylamine crystal structures and is apparently an especially favorable mode of intermolecular interaction in these compounds.     

One-chain urokinase-type plasminogen activator from human sarcoma cells is a proenzyme with little or no intrinsic activity

We have compared the plasminogen activating capacity of one- and two-chain urokinase-type plasminogen activator (u-PA). In a 125I-plasminogen conversion assay in the presence of high amounts of a plasmin inhibitor, one-chain u-PA pretreated with diisopropyl fluorophosphate had no detectable activity, the detection limit corresponding to the activity of a 400-fold lower amount of two-chain u-PA. In coupled assays in which generated plasmin was measured with a synthetic substrate, activity was clearly observed with the one-chain preparation, but the initial rate of plasminogen activation was lower than that of a 250-fold smaller concentration of two-chain u-PA. The coupled assays for one-chain u-PA are self-activating because plasmin catalyzes conversion of one- to two-chain u-PA, and it is not possible to decide whether the low activity of one-chain u-PA observed with this type of assay is intrinsic or due to contaminations. On the basis of these findings and a discussion of previous studies, it is concluded that one-chain u-PA has a variety of properties similar to the one-chain proenzyme forms of other serine proteases and that it should, therefore, be considered as a genuine proenzyme form of u-PA.