Evaluation of Extractables in Processed and Unprocessed Polymer Materials Used for Pharmaceutical Applications

Polymeric materials are often used in pharmaceutical packaging, delivery systems, and manufacturing components. There is continued concern that chemical entities from polymeric components may leach into various dosage forms, particularly those that are comprised of liquids such as parenterals, injectables, ophthalmics, and inhalation products. In some cases, polymeric components are subjected to routine extractables testing as a control measure. To reduce the risk of discovering leachables during stability studies late in the development process, or components that may fail extractables release criteria, it is proposed that extractables testing on polymer resins may be useful as a screening tool. Two studies have been performed to evaluate whether the extractables profile generated from a polymer resin is representative of the extractables profile of components made from that same resin. The ELSIE Consortium pilot program examined polyvinyl chloride and polyethylene, and another study evaluated polypropylene and a copolymer of polycarbonate and acrylonitrile butadiene styrene. The test materials were comprised of polymer resin and processed resin or molded components. Volatile, semi-volatile, and nonvolatile chemical profiles were evaluated after headspace sampling and extraction with solvents of varying polarity and pH. The findings from these studies indicate that there may or may not be differences between extractables profiles obtained from resins and processed forms of the resin depending on the type of material, the compounds of interest, and extraction conditions used. Extractables testing of polymer resins is useful for material screening and in certain situations may replace routine component testing.KEY WORDS: extractables, PC/ABS, polyethylene, polypropylene, polyvinylchloride     

An apparatus for tensile and bending tests of perinatal, neonatal, pediatric and adult cadaver osteoligamentous cervical spines

Investigations of biomechanical properties of pediatric cadaver cervical spines subjected to tensile or bending modes of loading are generally limited by a lack of available tissue and limiting sample sizes, both per age and across age ranges. It is therefore important to develop fixation techniques capable of testing individual cadavers in multiple modes of loading to obtain more biomechanical data per subject. In this study, an experimental apparatus and fixation methodology was developed to accommodate cadaver osteoligamentous head-neck complexes from around birth (perinatal) to full maturation (adult) [cervical length: 2.5-12.5 cm; head breadth: 6-15 cm; head length: 6-19 cm] and sequentially test the whole cervical spine in tension, the upper cervical spine in bending and the upper cervical spine in tension. The experimental apparatus and the fixation methodology provided a rigid casting of the head during testing and did not compromise the skull. Further testing of the intact skull and sub-cranial material was made available due to the design of the apparatus and fixation techniques utilized during spinal testing. The stiffness of the experimental apparatus and fixation technique are reported to better characterize the cervical spine stiffness data obtained from the apparatus. The apparatus and fixation technique stiffness was 1986 N/mm. This experimental system provides a stiff and consistent platform for biomechanical testing across a broad age range and under multiple modes of loading.     

Tunable mechanical stability and deformation response of a resilin-based elastomer

Resilin, the highly elastomeric protein found in specialized compartments of most arthropods, possesses superior resilience and excellent high-frequency responsiveness. Enabled by biosynthetic strategies, we have designed and produced a modular, recombinant resilin-like polypeptide bearing both mechanically active and biologically active domains to create novel biomaterial microenvironments for engineering mechanically active tissues such as blood vessels, cardiovascular tissues, and vocal folds. Preliminary studies revealed that these recombinant materials exhibit promising mechanical properties and support the adhesion of NIH 3T3 fibroblasts. In this Article, we detail the characterization of the dynamic mechanical properties of these materials, as assessed via dynamic oscillatory shear rheology at various protein concentrations and cross-linking ratios. Simply by varying the polypeptide concentration and cross-linker ratios, the storage modulus G' can be easily tuned within the range of 500 Pa to 10 kPa. Strain-stress cycles and resilience measurements were probed via standard tensile testing methods and indicated the excellent resilience (>90%) of these materials, even when the mechanically active domains are intercepted by nonmechanically active biological cassettes. Further evaluation, at high frequencies, of the mechanical properties of these materials were assessed by a custom-designed torsional wave apparatus (TWA) at frequencies close to human phonation, indicating elastic modulus values from 200 to 2500 Pa, which is within the range of experimental data collected on excised porcine and human vocal fold tissues. The results validate the outstanding mechanical properties of the engineered materials, which are highly comparable to the mechanical properties of targeted vocal fold tissues. The ease of production of these biologically active materials, coupled to their outstanding mechanical properties over a range of compositions, suggests their potential in tissue regeneration applications.     

Phytostat for the growth of lemna in semicontinuous culture with low sulfate

An apparatus is described by means of which Lemna perpusilla 6746 was grown photoautotrophically at a series of constant concentrations of inorganic sulfate, as low as 0.26 μm. Theoretical considerations relevant to this system are discussed and examples of the operation of the apparatus are presented. The data obtained were used to calculate sulfate uptake by the plant colonies as a function of sulfate concentration. The apparatus should be useful for the production of relatively large quantities of Lemna, grown under highly uniform conditions, with or without limitation of one or more nutrient(s). Other small vegetatively reproducing aquatic plants could be similarly studied. Uptake studies could be carried out on a variety of plant materials.     

An automated apparatus for the real-time monitoring of bioluminescence in plants

We developed an automated, high-throughput, bioluminescence-monitoring apparatus that can monitor 1920 individual plant seedlings under uniform light conditions. The apparatus is composed of five units: (i) a plate platform that can hold 20 96-well microplates under uniform light conditions, (ii) a scintillation counter, (iii) a robot that conveys plates between the plate platform and a scintillation counter, (iv) a sequence controller, and (v) an external computer that collects and analyzes bioluminescence data automatically. The apparatus gave reproducible and reliable results for both bioluminescence photon counts and period length of bioluminescence rhythms; neither was affected by the well position in a plate or the plate position on the platform. The apparatus is a powerful tool for both large-scale detailed analysis of gene expression and large-scale screening of mutants.     

Genotoxicity investigations on nanomaterials: Methods,preparation and characterization of test material,potential artifacts and limitations—Many questions,some answers

Nanomaterials display novel properties to which most toxicologists have not consciously been exposed before the advent of their practical use. The same properties, small size and particular shape, large surface area and surface activity, which make nanomaterials attractive in many applications, may contribute to their toxicological profile. This review describes what is known about genotoxicity investigations on nanomaterials published in the openly available scientific literature to-date. The most frequently used test was the Comet assay: 19 studies, 14 with positive outcome. The second most frequently used test was the micronucleus test: 14 studies, 12 of them with positive outcome. The Ames test, popular with other materials, was less frequently used (6 studies) and was almost always negative, the bacterial cell wall possibly being a barrier for many nanomaterials. Recommendations for improvements emerging from analyzing the reports summarized in this review are: Know what nanomaterial has been tested (and in what form); Consider uptake and distribution of the nanomaterial; Use standardized methods; Recognize that nanomaterials are not all the same; Use in vivo studies to correlate in vitro results; Take nanomaterials specific properties into account; Learn about the mechanism of nanomaterials genotoxic effects. It is concluded that experiences with other, non-nano, substances (molecules and larger particles) taught us that mechanisms of genotoxic effects can be diverse and their elucidation can be demanding, while there often is an immediate need to assess the genotoxic hazard. Thus a practical, pragmatic approach is the use of a battery of standard genotoxicity testing methods covering a wide range of mechanisms. Application of these standard methods to nanomaterials demands adaptations and the interpretation of results from the genotoxicity tests may need additional considerations. This review should help to improve standard genotoxicity testing as well as investigations on the underlying mechanism and the interpretation of genotoxicity data on nanomaterials.     

Microbiological Aspects of Ethylene Oxide Sterilization: I. Experimental Apparatus and Methods

A specially built thermochemical death-rate apparatus is described which can be used to determine the resistance of microorganisms to ethylene oxide under controlled conditions. The apparatus was designed to provide instantaneous exposure of microorganisms to ethylene oxide and to eliminate variables that could result in errors when death kinetic reaction rates are calculated. The apparatus is used to obtain ethylene oxide resistance data which are useful in evaluating and developing sterilizing cycles for materials with known bacterial concentrations, as well as for calculating probability factors on which a given test condition can be expected to provide sterilization.     

High‐Performance Triboelectric Nanogenerators Based on Solid Polymer Electrolytes with Asymmetric Pairing of Ions

In general, various kinds of surface modifications are utilized to enhance the power output performance of triboelectric nanogenerators (TENGs), but they typically have limited stability. Here, a new strategy of adding electrolytes with asymmetric ion pairing to polymer friction layers of TENGs is introduced in order to enhance their triboelectric property. Indeed, Kelvin probe force microscopy (KPFM) measurements show that an addition of phosphoric acid (H₃PO₄ ), an electrolyte with more cations than anions, to polyvinyl alcohol (PVA) can make it one of the most negative triboelectric materials; whereas, an addition of calcium chloride (CaCl₂ ), an electrolyte with more anions than cations, to PVA can make it one of the most positive triboelectric materials. Furthermore, the TENGs based on such solid polymer electrolytes (SPEs) produce significantly higher power output than typical metal‐polymer TENGs. Due to these unique features, SPEs are a promising triboelectric material for realizing high‐performance TENGs for self‐powered small electronics.     

High-throughput Saccharification Assay for Lignocellulosic Materials

Polysaccharides that make up plant lignocellulosic biomass can be broken down to produce a range of sugars that subsequently can be used in establishing a biorefinery. These raw materials would constitute a new industrial platform, which is both sustainable and carbon neutral, to replace the current dependency on fossil fuel. The recalcitrance to deconstruction observed in lignocellulosic materials is produced by several intrinsic properties of plant cell walls. Crystalline cellulose is embedded in matrix polysaccharides such as xylans and arabinoxylans, and the whole structure is encased by the phenolic polymer lignin, that is also difficult to digest ¹. In order to improve the digestibility of plant materials we need to discover the main bottlenecks for the saccharification of cell walls and also screen mutant and breeding populations to evaluate the variability in saccharification ². These tasks require a high throughput approach and here we present an analytical platform that can perform saccharification analysis in a 96-well plate format. This platform has been developed to allow the screening of lignocellulose digestibility of large populations from varied plant species. We have scaled down the reaction volumes for gentle pretreatment, partial enzymatic hydrolysis and sugar determination, to allow large numbers to be assessed rapidly in an automated system.This automated platform works with milligram amounts of biomass, performing ball milling under controlled conditions to reduce the plant materials to a standardised particle size in a reproducible manner. Once the samples are ground, the automated formatting robot dispenses specified and recorded amounts of material into the corresponding wells of 96 deep well plate (Figure 1). Normally, we dispense the same material into 4 wells to have 4 replicates for analysis. Once the plates are filled with the plant material in the desired layout, they are manually moved to a liquid handling station (Figure 2). In this station the samples are subjected to a mild pretreatment with either dilute acid or alkaline and incubated at temperatures of up to 90°C. The pretreatment solution is subsequently removed and the samples are rinsed with buffer to return them to a suitable pH for hydrolysis. The samples are then incubated with an enzyme mixture for a variable length of time at 50°C. An aliquot is taken from the hydrolyzate and the reducing sugars are automatically determined by the MBTH colorimetric method.     

Mini-review: Barnacle adhesives and adhesion

Barnacles are intriguing, not only with respect to their importance as fouling organisms, but also in terms of the mechanism of underwater adhesion, which provides a platform for biomimetic and bioinspired research. These aspects have prompted questions regarding how adult barnacles attach to surfaces under water. The multidisciplinary and interdisciplinary nature of the studies makes an overview covering all aspects challenging. This mini-review, therefore, attempts to bring together aspects of the adhesion of adult barnacles by looking at the achievements of research focused on both fouling and adhesion. Biological and biochemical studies, which have been motivated mainly by understanding the nature of the adhesion, indicate that the molecular characteristics of barnacle adhesive are unique. However, it is apparent from recent advances in molecular techniques that much remains undiscovered regarding the complex event of underwater attachment. Barnacles attached to silicone-based elastomeric coatings have been studied widely, particularly with respect to fouling-release technology. The fact that barnacles fail to attach tenaciously to silicone coatings, combined with the fact that the mode of attachment to these substrata is different to that for most other materials, indicates that knowledge about the natural mechanism of barnacle attachment is still incomplete. Further research on barnacles will enable a more comprehensive understanding of both the process of attachment and the adhesives used. Results from such studies will have a strong impact on technology aimed at fouling prevention as well as adhesion science and engineering.     

Computational wear prediction of artificial knee joints based on a new wear law and formulation

Laboratory joint wear simulator testing has become the standard means for preclinical evaluation of wear resistance of artificial knee joints. Recent simulator designs have been advanced and become successful at reproducing the wear patterns observed in clinical retrievals. However, a single simulator test can be very expensive and take a long time to run. On the other hand computational wear modelling is an alternative attractive solution to these limitations. Computational models have been used extensively for wear prediction and optimisation of artificial knee designs. However, all these models have adopted the classical Archard's wear law, which was developed for metallic materials, and have selected wear factors arbitrarily. It is known that such an approach is not generally true for polymeric bearing materials and is difficult to implement due to the high dependence of the wear factor on the contact pressure. Therefore, these studies are generally not independent and lack general predictability. The objective of the present study was to develop a new computational wear model for the knee implants, based on the contact area and an independent experimentally determined non-dimensional wear coefficient. The effects of cross-shear and creep on wear predictions were also considered. The predicted wear volume was compared with the laboratory simulation measurements. The model was run under two different kinematic inputs and two different insert designs with curved and custom designed flat bearing surfaces. The new wear model was shown to be capable of predicting the difference of the wear volume and wear pattern between the two kinematic inputs and the two tibial insert designs. Conversely, the wear factor based approach did not predict such differences. The good agreement found between the computational and experimental results, on both the wear scar areas and volumetric wear rates, suggests that the computational wear modelling based on the new wear law and the experimentally calculated non-dimensional wear coefficient should be more reliable and therefore provide a more robust virtual modelling platform.     

The cytoplasmic portion of the T3SS inner membrane ring components sort into distinct families based on biophysical properties

Type III secretion systems are used by many Gram-negative bacteria to inject effector proteins into eukaryotic cells to subvert their normal activities. Structurally conserved portions of the type III secretion apparatus include a: basal body located within the bacterial envelope; an exposed needle with tip complex that delivers effectors across the target cell membrane; and cytoplasmic sorting platform that selects cargo and powers secretion. While structurally conserved, the individual proteins that make up this nanomachine are typically not interchangeable though they do tend to fall into families. Here we selected a single domain from the inner membrane ring of the basal body from six different type III secretion systems (called SctD using a proposed unifying nomenclature). The selected domain creates an integral interface between the basal body and the sorting platform. Therefore, it represents a pivotal point between two distinct assemblies. All six protein domains possess a structural motif called a forkhead-associated-like (FHA-like) domain but differ greatly in their sequences and solution behaviors. These differences are used here to define family boundaries for these FHA-like domains. The data parallel, though not precisely, family boundaries defined by other proteins within the apparatus and by phylogenetic analysis. Ultimately, differences in the families are likely to reflect differences in the activities of these type III secretion systems or the host niches in which these pathogens are found.     

Enzymatic collapse of artificial polymer composite material containing double-stranded DNA

Large amounts of DNA-enriched biomaterials, such as salmon milts and shellfish gonads, are discarded as industrial waste around the world. Therefore, the utilizations of DNA with the specific function are important for the biomaterial science and the curce technology. We could convert the discarded DNA to an enzymatic collapsible material by the addition of DNA to the artificial polymer material, such as nylon. Although these DNA-artificial polymer composite materials were stable in water, these materials indicated the collapsibility at the DNA-hydrolyzed enzyme, such as Micrococcal nuclease, condition. Additionally, these collapsibilities under enzyme condition were controlled by the number of imino groups in the components of the artificial polymer. Furthermore, these composite materials could create the fiber form with a highly ordered molecular orientation by the reaction at the liquid/liquid interface. The DNA-artificial polymer composite materials may have the potential utility as a novel bio-, medical-, and environmental materials with the enzymatic collapsibility and degradability.     

湘西北晚二叠世-早三叠世早期牙形石古生态

通过对牙形石器官的对称性、相分布和地球化学特征的研究,探讨湘西北晚二叠世至三叠纪初牙形动物的生态分布.按器官所包括不同对称型分子的比例,牙形动物器官的对称性可分为4级,器官的对称性越高,动物运动能力越强.湘西北晚二叠世一三叠纪初地层可分为6种沉积相,即盆地相、盆缘-台坡相、开阔台地相、边缘浅滩相、局限台地相和泥坪相.具不同对称级器官的属种在6种沉积相中的差异分布,反映了牙形动物的3种生态类型:自由游泳型、浮游型和底栖型.牙形石地球化学组分的变化与当时环境演变相吻合.随水深增加,化石中的P含量升高,而Ca、s、sr的含量降低;Al、Fe和Ba在近岸浅水环境的牙形石中富集;而Mg的富集指示高盐环境.基于上述研究,划分了4个牙形石相,建立了一个组合横向替代的牙形动物生态分布模式.     

Biodegradable Monocrystalline Silicon Photovoltaic Microcells as Power Supplies for Transient Biomedical Implants

Bioresorbable electronic materials serve as foundations for implantable devices that provide active diagnostic or therapeutic function over a timeframe matched to a biological process, and then disappear within the body to avoid secondary surgical extraction. Approaches to power supply in these physically transient systems are critically important. This paper describes a fully biodegradable, monocrystalline silicon photovoltaic (PV) platform based on microscale cells (microcells) designed to operate at wavelengths with long penetration depths in biological tissues (red and near infrared wavelengths), such that external illumination can provide realistic levels of power. Systematic characterization and theoretical simulations of operation under porcine skin and fat establish a foundational understanding of these systems and their scalability. In vivo studies of a representative platform capable of generating ≈60 µW of electrical power under 4 mm of porcine skin and fat illustrate an ability to operate blue light‐emitting diodes (LEDs) as subdermal implants in rats for 3 d. Here, the PV system fully resorbs after 4 months. Histological analysis reveals that the degradation process introduces no inflammatory responses in the surrounding tissues. The results suggest the potential for using silicon photovoltaic microcells as bioresorbable power supplies for various transient biomedical implants.     

Determination of the intrinsic kinetic constants of immobilized glucose oxidase and catalase

Models of membrane systems containing immobilized glucose oxidase and catalase operating together or independently have been developed. A rotated disk electrode apparatus was employed with novel electrochemical operating conditions to experimentally determine mass transfer and intrinsic kinetic parameters of enzyme-containing membranes. The value of a mass transfer parameter that describes internal and external diffusion was first determined under conditions that do not permit the enzyme reactions. In a subsequent experiment with the reaction allowed, kinetic parameters corresponding to the intrinsic maximal velocity and Michaelis constants of the immobilized enzymes were estimated by regression analysis of data based on an appropriate two- or three- parameter model. It was found that immobilization reduced the maximal intrinsic velocity but had no detectable effect on the Michaelis constants. In all but one case- these methods for membrane characterization are nondestructive and can be used repeatedly on a given membrane. These techniques provide the means for quantitative comparisons of immobilization methods and make possible temporal studies of immobilized enzyme inactivation.     

Biocompatibility testing of branched and linear polyglycidol

Polyglycidols are flexible hydrophilic polyethers that are potentially biocompatible polymers based on their similarities to the well-studied poly(ethyleneglycol). Polyglycidols can be prepared as branched or linear polymers by suitable synthetic methods. Biocompatibility testing of these polymers conducted in vitro as well as in vivo are reported here. The in vitro studies included hemocompatibility testing for effects on coagulation (PT and APTT), complement activation, red blood cell aggregation, and whole blood viscosity measurements. In vitro cytotoxicity experiments were also conducted. The results were compared with some of the common biocompatible polymers already in human use. Results from these studies show that polyglycidols are highly biocompatible. Hyperbranched polyglycidols were found to be well tolerated by mice even when injected in high doses.     

Application of the microbial community coalescence concept to riverine networks

Flows of water, soil, litter, and anthropogenic materials in and around rivers lead to the mixing of their resident microbial communities and subsequently to a resultant community distinct from its precursors. Consideration of these events through a new conceptual lens, namely, community coalescence, could provide a means of integrating physical, environmental, and ecological mechanisms to predict microbial community assembly patterns better in these habitats. Here, we review field studies of microbial communities in riverine habitats where environmental mixing regularly occurs, interpret some of these studies within the community coalescence framework and posit novel hypotheses and insights that may be gained in riverine microbial ecology through the application of this concept. Particularly in the face of a changing climate and rivers under increasing anthropogenic pressures, knowledge about the factors governing microbial community assembly is essential to forecast and/or respond to changes in ecosystem function. Additionally, there is the potential for microbial ecology studies in rivers to become a driver of theory development: riverine systems are ideal for coalescence studies because regular and predictable environmental mixing occurs. Data appropriate for testing community coalescence theory could be collected with minimal alteration to existing study designs.     

Comparative ecophysiology of leaf and canopy photosynthesis

Leaves and herbaceous leaf canopies photosynthesize efficiently although the distribution of light, the ultimate resource of photosynthesis, is very biased in these systems. As has been suggested in theoretical studies, if a photosynthetic system is organized such that every photosynthetic apparatus photosynthesizes in concert, the system as a whole has the sharpest light response curve and is most adaptive. This condition can be approached by (i) homogenization of the light environment and (ii) acclimation of the photosynthetic properties of leaves or chloroplasts to their local light environments. This review examines these two factors in the herbaceous leaf canopy and in the leaf. Changes in the inclination of leaves in the canopy and differentiation of mesophyll into palisade and spongy tissue contribute to the moderation of the light gradient. Leaf and chloroplast movements in the upper parts of these systems under high irradiances also moderate light gradients. Moreover, acclimation of leaves and chloroplasts to the local light environment is substantial. These factors increase the efficiency of photosynthesis considerably. However, the systems appear to be less efficient than the theoretical optimum. When the systems are optically dense, the light gradients may be too great for leaves or chloroplasts to acclimate. The loss of photosynthetic production attributed to the imperfect adjustment of photosynthetic apparatus to the local light environment is most apparent when the photosynthesis of the system is in the transition between the light-limited and light-saturated phases. Although acclimation of the photosynthetic apparatus and moderation of light gradients are imperfect, these markedly raise the efficiency of photosynthesis. Thus more mechanistic studies on these adaptive attributes are needed. The causes and consequences of imperfect adjustment should also be investigated.     

Recent developments in lipase-catalyzed synthesis of polymeric materials

In the past three years, enzymatic polymerization has dramatically developed and provided many successful examples in the construction of functional polymeric materials. In this review, the lipase-catalyzed synthesis of polymeric materials is systematically summarized, focusing on the synthesis of complex and well-defined polyesters. Exploration of novel biocatalysts and reaction media is described, with particular emphasis on the enzymes obtained via immobilization or protein engineering strategies, green solvents and reactors. Enzymatic polyester synthesis is then discussed with regard to the different reaction types, including ring-opening polymerization, polycondensation, combination of ring-opening polymerization with polycondensation, and chemoenzymatic polymerization. Using enzymatic polymerization, many polymeric materials with tailor-made structures and properties have been successfully designed and synthesized. Finally, recent developments in catalytic kinetics and mechanistic studies through the use of spectroscopy, mathematics and computer techniques are introduced. Overall, the review demonstrates that lipase-catalyzed synthesis of polymeric materials could be a promising platform for green polymer chemistry, and will be potential to produce biodegradable and biocompatible polymers.