Infrared reflection-absorption spectroscopy: Principles and applications to lipid-protein interaction in Langmuir films

Infrared reflection-absorption spectroscopy (IRRAS) of lipid/protein monolayer films in situ at the air/water interface provides unique molecular structure and orientation information from the film constituents. The technique is thus well suited for studies of lipid/protein interaction in a physiologically relevant environment. Initially, the nature of the IRRAS experiment is described and the molecular structure information that may be obtained is recapitulated. Subsequently, several types of applications, including the determination of lipid chain conformation and tilt as well as elucidation of protein secondary structure are reviewed. The current article attempts to provide the reader with an understanding of the current capabilities of IRRAS instrumentation and the type of results that have been achieved to date from IRRAS studies of lipids, proteins, and lipid/protein films of progressively increasing complexity. Finally, possible extensions of the technology are briefly considered.     

Insertion of lipidated Ras proteins into lipid monolayers studied by infrared reflection absorption spectroscopy (IRRAS)

Ras proteins have to be associated with the inner leaflet of the plasma membrane to perform their signaling functions. This membrane targeting and binding is controlled by post-translational covalent attachment of farnesyl and palmitoyl chains to cysteines in the membrane anchor region of the N- and H-Ras isoforms. Two N-Ras lipoproteins were investigated, namely a farnesylated and hexadecylated protein, presenting the natural hydrophobic modifications and a doubly hexadecylated construct, respectively. The proteins are surface active and form a Gibbs monolayer at the air-D2O interface. The contours of the amide-I bands were analyzed using infrared reflection absorption spectroscopy (IRRAS). Langmuir monolayers of a mixture of POPC, brain sphingomyelin, and cholesterol were used as half of a model biomembrane to study the insertion of these N-Ras proteins. They insert with their hydrophobic anchors into lipid monolayers but at higher surface pressures (30 mN/m); the farnesylated and hexadecylated protein desorbs completely from the monolayer, whereas the doubly hexadecylated protein remains incorporated. During the insertion process, changes in the orientation of the protein secondary structure were detected by comparison with simulated IRRA spectra, based on the information on the relative orientation of the secondary structure elements from the protein crystal structure data.     

Secondary structure and lipid interactions of the N-terminal segment of pulmonary surfactant SP-C in Langmuir films: IR reflection-absorption spectroscopy and surface pressure studies

Pulmonary surfactant, a thin lipid/protein film lining mammalian lungs, functions in vivo to reduce the work of breathing and to prevent alveolar collapse. Analogues of two hydrophobic surfactant proteins, SP-B and SP-C, have been incorporated into therapeutic agents for respiratory distress syndrome, a pathological condition resulting from deficiency in surfactant. To facilitate rational design of therapeutic agents, a molecular level understanding of lipid interaction with surfactant proteins or their analogues in aqueous monolayer films is necessary. The current work uses infrared reflection-absorption spectroscopy (IRRAS) to determine peptide conformation and the effects of S-palmitoylation on the lipid interactions of a synthetic 13 residue N-terminal peptide [SP-C13(palm)(2)] of SP-C, in mixtures with 1,2-dipalmitoylphosphatidylcholine (DPPC) or 1,2-dipalmitoylphosphatidylglycerol (DPPG). Two Amide I' features, at approximately 1655 and approximately 1639 cm(-1) in the peptide IRRAS spectra, are assigned to alpha-helical peptide bonds in hydrophobic and aqueous environments, respectively. In binary DPPC/SP-C13(palm)(2) films, the proportion of hydrated/hydrophobic helix increases reversibly with surface pressure (pi), suggestive of the peptide being squeezed out from hydrophobic regions of the monolayer. No such effect was observed for DPPG/peptide monolayers, indicative of stronger, probably electrostatic, interactions. Depalmitoylation produced a weakened interaction with either phospholipid as deduced from IRRAS spectra and from pi-area isotherms. S-Palmitoylation may modulate peptide hydration and conformation in the N-terminal region of SP-C and may thus permit the peptide to remain in the film at the high surface pressures present during lung compression. The unique capability of IRRAS to detect the surface pressure dependence of protein or peptide structure/interactions in a physiologically relevant model for surfactant is clearly demonstrated.     

An infrared reflection-absorption spectroscopy study of the secondary structure in (KL4)4K,a therapeutic agent for respiratory distress syndrome,in aqueous monolayers with phospholipids

KLLLLKLLLLKLLLLKLLLLK (KL(4)) has been suggested to mimic some aspects of the pulmonary surfactant protein SP-B and has been tested clinically as a therapeutic agent for respiratory distress syndrome in premature infants [Cochrane, C. G., and Revak, S. D. (1991) Science 254, 566-568]. It is of obvious interest to understand the mechanism of KL(4) function as a guide for design of improved therapeutic agents. Attenuated total reflection (ATR) IR measurements have indicated that KL(4) is predominantly alpha-helical with a transmembrane orientation in lipid multilayers (1), a geometry quite different from the originally proposed peripheral membrane lipid interaction. However, the lipid multilayer model required for ATR may not be the best experimental paradigm to mimic the in vivo function of KL(4). In the current experiments, IR reflection-absorption spectroscopy (IRRAS) was used to evaluate peptide secondary structure in monolayers at the air/water interface, the physical state that best approximates the alveolar lining. In contrast to the ATR-IR results, KL(4) (2.5-5 mol %) films with either DPPC or DPPC/DPPG (7/3 mol ratio) adopted an antiparallel beta-sheet structure at all surface pressures studied > or =5 mN/m, including pressures physiologically relevant for lung function (40-72 mN/m). In contrast, in DPPG/KL(4) films, the dominant conformation was the alpha-helix over the entire pressure range, a possible consequence of enhanced electrostatic interactions. IRRAS has thus provided unique molecular structure information and insight into KL(4)/lipid interaction in a physiologically relevant state. A structural model is proposed for the response of the peptide to surface pressure changes.     

External reflection absorption infrared spectroscopy study of lung surfactant proteins SP-B and SP-C in phospholipid monolayers at the air/water interface.

The interactions of the hydrophobic pulmonary surfactant proteins SP-B and SP-C with 1,2-dipalmitoylphosphatidylcholine in mixed, spread monolayer films have been studied in situ at the air/water interface with the technique of external reflection absorption infrared spectroscopy (IRRAS). SP-C has a mostly alpha-helical secondary structure both in the pure state and in the presence of lipids, whereas SP-B secondary structure is a mixture of alpha-helical and disordered forms. When films of SP-B/1,2-dipalmitoylphosphatidylcholine are compressed to surface pressures (pi) greater than approximately 40-43 mN/m, the protein is partially (15-35%) excluded from the surface, as measured by intensity ratios of the peptide bond amide l/lipid C==O stretching vibrations. The extent of exclusion increases as the protein/lipid ratio in the film increases. In contrast, SP-C either remains at the surface at high pressures or leaves accompanied by lipids. The amide l peak of SP-C becomes asymmetric as a result of the formation of intermolecular sheet structures (1615-1630 cm-1) suggestive of peptide aggregation. The power of the IRRAS experiment for determination of film composition and molecular structure, i.e., as a direct test of the squeeze-out hypothesis of pulmonary surfactant function, is evident from this work.     

Domain structure and molecular conformation in annexin V/1,2-dimyristoyl-sn-glycero-3-phosphate/Ca2+ aqueous monolayers: a Brewster angle microscopy/infrared reflection-absorption spectroscopy study.

Annexins comprise a family of proteins that exhibit a Ca2+-dependent binding to phospholipid membranes that is possibly relevant to their in vivo function. Although substantial structural information about the ternary (protein/lipid/Ca2+) interaction in bulk phases has been derived from a variety of techniques, little is known about the temporal and spatial organization of ternary monolayer films. The effect of Ca2+ on the interactions between annexin V (AxV) and anionic DMPA monolayers was therefore investigated using three complementary approaches: surface pressure measurements, infrared reflection-absorption spectroscopy (IRRAS), and Brewster angle microscopy (BAM). In the absence of Ca2+, the injection of AxV into an aqueous subphase beneath a DMPA monolayer initially in a liquid expanded phase produced BAM images revealing domains of protein presumably surrounded by liquid-expanded lipid. The protein-rich areas expanded with time, resulting in reduction of the area available to the DMPA and, eventually, in the formation of condensed lipid domains in spatial regions separate from the protein film. There was thus no evidence for a specific binary AxV/lipid interaction. In contrast, injection of AxV/Ca2+ at a total Ca2+ concentration of 10 microM beneath a DMPA monolayer revealed no pure protein domains, but rather the slow formation of pinhead structures. This was followed by slow (>2 h) rigidification of the whole film accompanied by an increase in surface pressure, and connection of solid domains to form a structure resembling strings of pearls. These changes were characteristic of this specific ternary interaction. Acyl chain conformational order of the DMPA, as measured by nu(sym)CH2 near 2850 cm(-1), was increased in both the AxV/DMPA and AxV/DMPA/Ca2+ monolayers compared to either DMPA monolayers alone or in the presence of Ca2+. The utility of the combined structural and temporal information derived from these three complementary techniques for the study of monolayers in situ at the air/water interface is evident from this work.     

Determination of base pairing in yeast 5S and 5.8S RNA infrared spectroscopy.

Infrared Spectroscopy was used to determine the numbers of base pairs for yeast 5S RNA and 5.8S RNA. The spectra were recorded at 20 degrees C and 50 degrees C, where tertiary interactions are assumed to be of less importance. It may be concluded that the structure of both RNAs is highly ordered and that there are large contributions of tertiary interactions. The results are compared with data derived from structural models that were proposed in the literature as well as with data previously published for prokaryotic 5S RNAs.     

Adsorption properties of proteins at and near the air/water interface from IRRAS spectra of protein solutions

A detailed study is performed using infrared reflection absorption spectroscopy (IRRAS) to characterize the molecular behaviour of proteins at and near the air/water interface of protein solutions. IRRAS spectra of beta-casein solutions in H2O and D2O show spectral shifts and derivative-like features not commonly observed in monomolecular layer systems. They can be fully understood using optical theory. Fair agreement between experimental and simulated IRRAS spectra over a broad spectral range (4000-1000 cm(-1)) is obtained using a stratified layer model. An attenuated total reflection and transmission spectrum is used to represent the protein extinction coefficient in H2O and D2O, respectively. It is shown that the derivative-like features observed result from the reflective properties of the proteins themselves. Furthermore, both concentration and film thickness could be fitted. At high protein concentrations (100 mg/mL) the spectrum is that of a single homogeneous protein solution. At 0.1 mg/mL, beta-casein is accumulated at the surface in a thin layer of approximately 10 nm thickness, with a concentration about 2500 times higher than in the sub-phase. At an initial concentration of 10 mg/mL, the concentration in the surface layer is about 15 times higher than in the subphase, while the thickness is about 30 nm.     

Use of surface enhanced infrared absorption spectroscopy (SEIRA) to probe the functionality of a protein monolayer

We present a novel infrared method to investigate the functionality of a protein monolayer tethered to a metal substrate. The approach employs Surface Enhanced Infrared Absorption Spectroscopy (SEIRAS), which renders high surface sensitivity by enhancing the signal of the adsorbed protein by up to approximately 2 orders of magnitude. We demonstrate that the electrochemically induced absorption changes of a cytochrome c monolayer can be observed with excellent signal-to-noise ratio when the protein is adhered to a modified gold surface. To probe membrane proteins, a concept is introduced for the oriented incorporation into solid supported lipid bilayers. Recombinant cytochrome c oxidase solubilized in detergent is immobilized on a chemically modified gold surface via the affinity of its histidine (His)-tag to a nickel-chelating nitro-triacetic acid (NTA) surface. The protein monolayer is reconstituted into the lipid environment by detergent removal. Changing the orientation of the protein with respect to the metal surface is achieved by inserting the His-tag on either side of the membrane protein surface. Orientational control is mandatory for experiments in which electrons are injected from the electrode into the protein. The presented methodology opens new avenues to study the mechanism of the biomedically relevant class of electron and voltage-gated proteins on the atomic level.     

Thermal stability and DPPC/Ca2+ interactions of pulmonary surfactant SP-A from bulk-phase and monolayer IR spectroscopy.

Surfactant protein A (SP-A), the most abundant pulmonary surfactant protein, is implicated in multiple biological functions including surfactant homeostasis, biophysical activity, and host defense. SP-A forms ternary complexes with lipids and Ca2+ which are important for protein function. The current study uses infrared (IR) transmission spectroscopy to investigate the bulk-phase interaction between SP-A, 1,2-dipalmitoylphosphatidylcholine (DPPC), and Ca2+ ions along with IR reflection-absorption spectroscopy (IRRAS) to examine protein secondary structure and lipid orientational order in monolayer films in situ at the air/water interface. The amide I contour of SP-A reveals two features at 1653 and 1636 cm(-1) arising from the collagen-like domain and a broad feature at 1645 cm(-1) suggested to arise from the carbohydrate recognition domain (CRD). SP-A secondary structure is unchanged in lipid monolayers. Thermal denaturation of SP-A in the presence of either DPPC or Ca2+ ion reveals a sequence of events involving the initial melting of the collagen-like region, followed by formation of intermolecular extended forms. Interestingly, these spectral changes were inhibited in the ternary system, showing that the combined presence of both DPPC and Ca2+ confers a remarkable thermal stability upon SP-A. The ternary interaction was revealed by the enhanced intensity of the asymmetric carboxylate stretching vibration. The IRRAS measurements indicated that incorporation of SP-A into preformed DPPC monolayers at a surface pressure of 10 mN/m induced a decrease in the average acyl chain tilt angle from 35 degrees to 28 degrees. In contrast, little change in chain tilt was observed at surface pressures of 25 or 40 mN/m. These results are consistent with and extend the fluorescence microscopy studies of Keough and co-workers [Ruano, M. L. F., et al. (1998) Biophys. J. 74, 1101-1109] in which SP-A was suggested to accumulate at the liquid-expanded/liquid-condensed boundary. Overall these experiments reveal the remarkable stability of SP-A in diverse, biologically relevant environments.     

Ideally amphipathic beta-sheeted peptides at interfaces: structure, orientation, affinities for lipids and hemolytic activity of (KL)(m)K peptides

Designed to model ideally amphipathic beta-sheets, the minimalist linear (KL)(m)K peptides (m=4-7) were synthesized and proved to form stable films at the air/water interface, they insert into compressed dimyristoylphosphatidylcholine monolayers and interact with egg phosphatidylcholine vesicles. Whatever the interface or the lateral pressure applied to the films, FT-IR and polarization-modulated IRRAS spectroscopy developed in situ on the films indicated that all the peptides totally fold into intermolecular antiparallel beta-sheets. Calculated spectra of the amide region allowed us to define the orientation of the beta-strands compared to the interface. It is concluded that such beta-sheets remain flat-oriented without deep perturbation of zwitterionic phospholipids. Dansyl labelling at the N-terminus indicates that all the peptides are monomeric at a low concentration in aqueous buffer and bind to lipids with similar Dns burying. The affinities for zwitterionic lecithin mono- and bilayers, quantitatively estimated from buffer to lipid partition constants, monotonically increased with peptide length, indicating that hydrophobicity is a limiting parameter for lipid and membrane affinities. Peptides induced permeability increases on zwitterionic liposomes, they are strongly hemolytic towards human erythrocytes and their activity increases concurrently with length. Taking into account the lipid affinity, a hemolytic efficiency can be defined: at the same amount of peptide bound, this efficiency strongly increases with the peptide length. It is proposed that the first determinant step of membrane disturbance is the invasion of the outer membrane leaflet by these ideally amphipathic beta-sheeted structures lying flat at the interface, like large rafts depending on the number of beta-strands.     

Interaction of recombinant surfactant protein D with lipopolysaccharide: conformation and orientation of bound protein by IRRAS and simulations

Effective innate host defense requires early recognition of pathogens. Surfactant protein D (SP-D), shown to play a role in host defense, binds to the lipopolysaccharide (LPS) component of Gram-negative bacterial membranes. Binding takes place via the carbohydrate recognition domain (CRD) of SP-D. Recombinant trimeric neck+CRDs (NCRD) have proven valuable in biophysical studies of specific interactions. Although X-ray crystallography has provided atomic level information on NCRD binding to carbohydrates and other ligands, molecular level information about interactions between SP-D and biological ligands under physiologically relevant conditions is lacking. Infrared reflection-absorption spectroscopy (IRRAS) provides molecular structure information from films at the air/water interface where protein adsorption to LPS monolayers serves as a model for protein-lipid interaction. In the current studies, we examine the adsorption of NCRDs to Rd 1 LPS monolayers using surface pressure measurements and IRRAS. Measurements of surface pressure, Amide I band intensities, and LPS acyl chain conformational ordering, along with the introduction of EDTA, permit discrimination of Ca (2+)-mediated binding from nonspecific protein adsorption. The findings support the concept of specific binding between the CRD and heptoses in the core region of LPS. In addition, a novel simulation method that accurately predicts the IR Amide I contour from X-ray coordinates of NCRD SP-D is applied and coupled to quantitative IRRAS equations providing information on protein orientation. Marked differences in orientation are found when the NCRD binds to LPS compared to nonspecific adsorption. The geometry suggests that all three CRDs are simultaneously bound to LPS under conditions that support the Ca (2+)-mediated interaction.     

Interaction of a nonspecific wheat lipid transfer protein with phospholipid monolayers imaged by fluorescence microscopy and studied by infrared spectroscopy.

The interaction of a nonspecific wheat lipid transfer protein (LTP) with phospholipids has been studied using the monolayer technique as a simplified model of biological membranes. The molecular organization of the LTP-phospholipid monolayer has been determined by using polarized attenuated total internal reflectance infrared spectroscopy, and detailed information on the microstructure of the mixed films has been investigated by using epifluorescence microscopy. The results show that the incorporation of wheat LTP within the lipid monolayers is surface-pressure dependent. When LTP is injected into the subphase under a dipalmytoylphosphatidylglycerol monolayer at low surface pressure (< 20 mN/m), insertion of the protein within the lipid monolayer leads to an expansion of dipalmytoylphosphatidylglycerol surface area. This incorporation leads to a decrease in the conformational order of the lipid acyl chains and results in an increase in the size of the solid lipid domains, suggesting that LTP penetrates both expanded and solid domains. By contrast, when the protein is injected under the lipid at high surface pressure (> or = 20 mN/m) the presence of LTP leads neither to an increase of molecular area nor to a change of the lipid order, even though some protein molecules are bound to the surface of the monolayer, which leads to an increase of the exposure of the lipid ester groups to the aqueous environment. On the other hand, the conformation of LTP, as well as the orientation of alpha-helices, is surface-pressure dependent. At low surface pressure, the alpha-helices inserted into the monolayers are rather parallel to the monolayer plane. In contrast, at high surface pressure, the alpha-helices bound to the surface of the monolayers are neither parallel nor perpendicular to the interface but in an oblique orientation.     

Characterization by infrared spectroscopy of the interaction of a cardiotoxin with phosphatidic acid and with binary mixtures of phosphatidic acid and phosphatidylcholine.

The effect of cardiotoxin IIa from Naja mossambica mossambica, a small basic protein extracted from snake venom, on dimyristoylphosphatidic acid (DMPA) and on equimolar mixtures of DMPA and dimyristoylphosphatidylcholine (DMPC) has been studied by Fourier transform infrared spectroscopy. The interaction of cardiotoxin with DMPA dispersions decreases both the cooperativity of the phase transition of the lipid and the molecular order of the lipid acyl chains in the gel phase. This effect increases with the proportion of the toxin in the complexes and leads to the total abolition of the phase transition of DMPA at a lipid-to-protein molar ratio of 5. Small-angle X-ray results demonstrate that the structure of the lipid-protein complexes is poorly ordered and gives rise to broad diffusion peaks rather than to well-resolved diffraction patterns. Infrared spectra of oriented cardiotoxin-DMPA films show that the protein is not homogeneously oriented with respect to the bilayer surface. The destabilization of the gel-phase structure of DMPA by cardiotoxin also results in a deeper water penetration in the interfacial region of the lipid since more carbonyl ester groups appear to be hydrogen bonded in the presence of the toxin. The infrared results on the phosphate group vibrations also indicate clearly that the basic residues of cardiotoxin interact strongly with the phosphate group of DMPA that becomes partly ionized at a pH as low as 6.5. The results obtained on the interaction of cardiotoxin with an equimolar mixture of DMPA and DMPC clearly demonstrate the ability of this toxin to induce lateral phase separation in this mixture with one phase containing DMPA-rich domains perturbed by cardiotoxin while the second phase is composed of regions enriched in DMPC. Comparison of the results of the current study with those obtained on other basic proteins and polypeptides suggests that charge-induced phase separation occurs only when the charge density on certain regions of the protein structure is high enough to lead to efficient electrostatic interactions with anionic phospholipids. This condition occurs only when the conformation of the protein or polypeptide is well-ordered at the lipid interface.     

Polarization-modulated infrared spectroscopy and x-ray reflectivity of photosystem II core complex at the gas-water interface.

The state of photosystem II core complex (PS II CC) in monolayer at the gas-water interface was investigated using in situ polarization-modulated infrared reflection absorption spectroscopy and x-ray reflectivity techniques. Two approaches for preparing and manipulating the monolayers were examined and compared. In the first, PS II CC was compressed immediately after spreading at an initial surface pressure of 5.7 mN/m, whereas in the second, the monolayer was incubated for 30 min at an initial surface pressure of 0.6 mN/m before compression. In the first approach, the protein complex maintained its native alpha-helical conformation upon compression, and the secondary structure of PS II CC was found to be stable for 2 h. The second approach resulted in films showing stable surface pressure below 30 mN/m and the presence of large amounts of beta-sheets, which indicated denaturation of PS II CC. Above 30 mN/m, those films suffered surface pressure instability, which had to be compensated by continuous compression. This instability was correlated with the formation of new alpha-helices in the film. Measurements at 4 degreesC strongly reduced denaturation of PS II CC. The x-ray reflectivity studies indicated that the spread film consists of a single protein layer at the gas-water interface. Altogether, this study provides direct structural and molecular information on membrane proteins when spread in monolayers at the gas-water interface.     

In‐situ monitoring of Saccharomyces cerevisiae ITV01 bioethanol process using near‐infrared spectroscopy NIRS and chemometrics

The application feasibility of in‐situ or in‐line monitoring of S. cerevisiae ITV01 alcoholic fermentation process, employing Near‐Infrared Spectroscopy (NIRS) and Chemometrics, was investigated. During the process in a bioreactor, in the complex analytical matrix, biomass, glucose, ethanol and glycerol determinations were performed by a transflection fiber optic probe immersed in the culture broth and connected to a Near‐Infrared (NIR) process analyzer. The NIR spectra recorded between 800 and 2,200 nm were pretreated using Savitzky‐Golay smoothing and second derivative in order to perform a partial least squares regression (PLSR) and generate the calibration models. These calibration models were tested by external validation and then used to predict concentrations in batch alcoholic fermentations. The standard errors of calibration (SEC) for biomass, ethanol, glucose and glycerol were 0.212, 0.287, 0.532, and 0.296 g/L and standard errors of prediction (SEP) were 0.323, 0.369, 0.794, and 0.507 g/L, respectively. Calibration and validation criteria were defined and evaluated in order to generate robust and reliable models for an alcoholic fermentation process matrix. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:510–517, 2016     

Identification of carbapenem‐resistant Acinetobacter baumannii clones using infrared spectroscopy

In this work we assessed the discriminatory ability of Fourier‐transform Infrared Spectroscopy (FTIR) in 22 representative isolates from a collection of 318 carbapenem‐hydrolyzing class D β ‐lactamases (CHDL)‐producing Acinetobacter spp. (5 hospitals; 2001–2008) previously characterized by DNA‐based typing methods. FTIR spectra were acquired with a Bruker spectrometer and analyzed with support of several chemometric tools. The results showed that FTIR spectroscopy was able to distinguish the main CHDL‐producing Acinetobacter baumannii lineages causing infection in Portugal, the ST103 carrying bla_OXA‐58, ST98 carrying bla_OXA‐24/40and ST92 carrying bla_OXA‐23. Moreover, this study revealed distinctive phenotypic features of A. baumannii lineages causing infections that might justify different epidemic potential. Spectroscopy may arise as a low cost and easily to perform alternative for typing A. baumannii isolates. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Modulation of cytochrome C coupling to anionic lipid monolayers by a change of the phase state: a combined neutron and infrared reflection study

The effect of monolayer domain formation on the electrostatic coupling of cytochrome c from the subphase to a monolayer at the air/water interface was studied using a combination of neutron reflection (NR) and infrared reflection absorption spectroscopy (IRRAS) techniques. The monolayers consisted of a binary mixture of the zwitterionic phosphatidylcholine and the anionic phosphatidylglycerol. For a monolayer of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylglycerol (DMPG, 30 mol%), which exhibits a non-ideal mixing of the two lipid components, we observed a significantly higher protein coupling to the liquid-condensed phase compared to the liquid-expanded state. In contrast, this higher protein binding was not observed when the two lipids had identical chain lengths (nearly ideal mixing). Similarly, for an equimolar mixture of DPPC and DMPG, we did not observe significant differences in the protein binding for the two phase states. The results strongly suggest that the domain formation in a condensed monolayer under non-ideal lipid mixing conditions is crucial for the cytochrome c binding strength. Furthermore, this study demonstrates the significant advantages of gathering information on protein-monolayer coupling by the combined use of a dedicated IRRAS set-up with the NR technique.     

Picosecond dynamics of bacteriorhodopsin, probed by time-resolved infrared spectroscopy.

The photoinduced reaction cycle of bacteriorhodopsin (BR) has been studied by means of a recently developed picosecond infrared spectroscopic method at ambient temperature. BR - K difference spectra between 1560 and 1700 cm-1 have been recorded at delay times from 100 ps to 14 ns. The spectrum remains unchanged during this period. The negative difference OD band at 1660 cm-1 indicates the peptide backbone responds within 50 ps. A survey in the region of carboxylic side chain absorption around 1740 cm-1 reveals that perturbations of those groups, present in low-temperature FTIR spectra, are not observable within 10 ns, suggesting a slow conformational change.     

Secondary structure in lung surfactant SP-B peptides: IR and CD studies of bulk and monolayer phases

Pulmonary surfactant protein SP-B is known to facilitate adsorption and spreading of surfactant components across the air/water interface. This property appears essential for in vivo function in the alveolar subphase and at the air/alveolar surface. Three peptides with amino acid sequences based on SP-B containing predicted alpha-helical regions (SP-B(1--20), SP-B(9--36A), SP-B(40--60A)) have been synthesized to probe structure-function relationships and protein-lipid interaction in bulk phase and monolayer environments. IR and CD studies are reported along with traditional surface pressure-molecular area (pi-A) isotherms and IR reflection-absorption spectroscopy (IRRAS) investigations conducted at the air/water interface. In bulk phase, helix-promoting environments (methanol and aqueous dispersions of lipid vesicles), SP-B(1--20) and SP-B(9--36A) contained significant amounts of alpha-helical structure, whereas varying degrees of alpha-helix, random coil, and beta-sheet were observed in aqueous solutions and monolayers. The most striking behavior was observed for SP-B(9--36A), which displayed reversible surface pressure-induced beta-sheet formation. Bulk phase lipid melting curves and monolayer experiments with peptide-lipid mixtures showed subtle differences in the degree of bulk phase interaction and substantial differences in peptide surface activity. The uniqueness of IRRAS is emphasized as the importance of evaluating secondary structure in both bulk phase and monolayer environments for lung surfactant peptide mimics is demonstrated.