Candida antarctica lipase B catalyzed enantioselective acylation of pyrimidine acyclonucleoside

Abstract

The influence of solvent and acyl group donor on selectivity of the transesterification reaction of 1-[1′,3′-dihydroxy-2′-propoxymethyl]-5-methyluracil, a structural analogue of ganciclovir was examined. Lipase (EC 3.1.1.3) B from Candida antarctica (CALB) enabled desymmetrization of prochiral hydroxyl groups when 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF₆]) was used as a reaction medium. It was observed that CALB was up to 2.7–4 times more enantioselective in the ionic liquid [Bmim][PF₆] than in conventional organic solvents.     

Optimization of lipase-catalyzed glucose ester synthesis in ionic liquids

Lipase-catalyzed esterification of glucose with fatty acids in ionic liquids (ILs) mixture was investigated by using supersaturated glucose solution. The effect of ILs mixture ratio, substrate ratio, lipase content, and temperature on the activity and stability of lipase was also studied. The highest yield of sugar ester was obtained in a mixture of 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-methyl-3-octylimidazolium bis[(trifluoromethyl)-sulfonyl]amide ([Omim][Tf₂N]) with a volume ratio of 9:1, while Novozym 435 (Candida antarctica type B lipase immobilized on acrylic resin) showed the optimal stability and activity in a mixture of [Bmim][TfO] and [Omim][Tf₂N] with a 1:1 volume ratio. Reuse of lipase and ILs was successfully carried out at the optimized reaction conditions. After 5 times reuse of Novozym 435 and ILs, 78% of initial activity was remained.     

Alpha-chymotrypsin catalysis in imidazolium-based ionic liquids

The transesterification reaction of N-acetyl-L-phenylalanine ethyl ester with 1-propanol catalyzed by alpha-chymotrypsin was examined in the ionic liquids 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF(6)]), and in combination with supercritical carbon dioxide (SC-CO(2)). The activity of alpha-chymotrypsin was studied to determine whether trends in solvent polarity, water activity, and enzyme support properties, observed with this enzyme in conventional organic solvents, hold for the novel environment provided by ionic liquids. alpha-Chymotrypsin freeze-dried with K(2)HPO(4), KCl, or poly(ethylene glycol) demonstrated no activity in [bmim][PF(6)] or [omim][PF(6)] at very low water concentrations, but moderate transesterification rates were observed with the ionic liquids containing 0.25% water (v/v) and higher. However, the physical complexation of the enzyme with poly(ethylene glycol) or KCl did not substantially stimulate activity in the ionic liquids, unlike that observed in hexane or isooctane. Activities were considerably higher in [omim][PF(6)] than [bmim][PF(6)]. Added water was not necessary for enzyme activity when ionic liquids were combined with SC-CO(2). These results indicate that [bmim][PF(6)] and [omim][PF(6)] provide a relatively polar environment, which can be modified with nonpolar SC-CO(2) to optimize enzyme activity.     

Enhanced activity of 3alpha-hydroxysteroid dehydrogenase by addition of the co-solvent 1-butyl-3-methylimidazolium (L)-lactate in aqueous phase of biphasic systems for reductive production of steroids

The enzyme activity of 3alpha-hydrosteroid dehydrogenase (HSDH) was enhanced by the addition of the co-solvent 1-butyl-3-methylimidazolium (L)-lactate ([Bmim][lactate]) to 50 mM Tris-HCl buffer. When utilizing [Bmim][lactate], the reaction velocity of HSDH increased. Also, reductive production of androsterone was investigated in an aqueous-organic solvent biphasic system containing 5% [Bmim][lactate] as the co-solvent of aqueous phase. In a coupled-enzyme system comprising HSDH and formate dehydrogenase (FDH), a two-fold increase in production rate of androsterone was obtained when utilizing [Bmim][lactate] with NADH regeneration.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Retention factors and resolutions of amino benzoic acid isomers with some lonic liquids

Ionic liquids in the form of organic salts are being widely used as new solvent media. In this paper three positional isomers,o-amino benzoic acid,m-amino benzoic acid, andp-amino benzoic acids were separated with four different ionic liquids as mobile phase additives using high performance liquid chromatography (HPLC). The following ionic liquids were used: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]), and 1-octyl-3-methylimidazolium methylsulfate ([OMIm][MS]). The effects of the alkyl group length on the imidazolium ring and its counterion, and the concentrations of the ionic liquids on the retention factors and resolutions of amino benzoic acid isomers were tested. The results of the separations with ionic liquids as the eluents were better than those without ionic liquids. Excellent separations of the three isomers were achieved using 2.0≈8.0 mM/L [OMIm][MS] and 1.0≈8.0 mM/L [EMIm][MS] as the eluent modifiers.     

The study of factors affecting the enzymatic hydrolysis of cellulose after ionic liquid pretreatment

Cellulose resource has got much attention as a promising replacement of fossil fuel. The hydrolysis of cellulose is the key step to chemical product and liquid transportation fuel. In this paper a serials of chloride, acetate, and formate based ionic liquids were used as solvents to dissolve cellulose. The cellulose regenerated from ILs was characterized by FTIR and X-ray powder diffraction. From the characterization and analysis, it was found that the original close and compact structure has changed a lot. After enzymatic hydrolysis, different kinds of ionic liquids (ILs) have different yields of the reducing sugar (TRS). They are 100%, 90.72%, and 88.92% from 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), 1-butyl-3-methylimidazolium formate ([BMIM][HCOO]) respectively after enzymatic hydrolysis at 50 °C for 5 h. The results indicated that the yields and the hydrolysis rates were improved apparently after ILs pretreatment comparing with the untreated substrates.     

Protease-catalyzed esterification of amino acid in water-miscible ionic liquid

The activity of two proteases in the esterification of N-acetyl-L-phenylalanine with ethanol was examined in the water-miscible ionic liquid, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([emim][Tf]). The activity of subtilisin was not only improved 9-fold by changing from a water-miscible organic solvent, acetonitrile, to [emim][Tf], but also was about three times greater than that in a water-immiscible organic solvent, octane. Likewise, the activity of alpha-chymotrypsin in [emim][Tf] was more effectively enhanced compared with that in a water-miscible or a water-immiscible organic solvent. The water content in [emim][Tf] affected the activity of subtilisin.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Kinetic resolution of (+/-)-1-phenylethanol in [Bmim][PF6] using high activity preparations of lipases

Lipases from two different sources Candida rugosa (CRL) and Burkholderia cepacia (BCL) were formulated as enzyme precipitated and rinsed with organic solvents, organic solvent rinsed enzyme preparation, cross-linked enzyme aggregates (CLEAs) and protein coated micro-crystals (PCMCs). These various enzyme formulates were evaluated for the kinetic resolution of (+/-)-1-phenylethanol in ionic liquid [Bmim][PF(6)] by transesterification with vinyl acetate. Of all the enzyme forms evaluated EPRP and PCMC in the case of CRL showed the best results with 26 % (E value=153) and 53% (E value=79) conversion, respectively, at 35 degrees C in 24h. Carrying out this conversion with PCMC at lower temperature of 25 degrees C further improved the E value to 453 (with 44% conversion in 12h). For BCL the acetone-rinsed enzyme preparation (AREP), CLEA and PCMC performed equally well with % conversion of 50 and 99 ee(p) (%) (E value >1000) in just 2h, whereas, the free lipase gave only 8% conversion.     

Effect of mobile phase additives on resolution of some nucleic compounds in high performance liquid chromatography

Here we investigate the chromatographic behavior, with reversed-phase high performance liquid chromatography (RP-HPLC) of nucleic compounds (nucleobases, nucleosides, and nucleotides) on a C₁₈ column in several different mobile phase additives, including1-butyl-3-methylimidazolium tetrafuloroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]) ionic liquids, ammonium formate, and potassium phosphate. The effect of the alkyl group length, the imidazolium ring, and the ionic liquid's counterions on retention and resolution of the samples were tested. The results show the potential application of a used buffer system, ion pairing system, and ionic liquid as mobile phase additives in liquid chromatography resolution of nucleic compounds.     

Properties of an ionic liquid-tolerant <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic">amyloliquefaciens</Emphasis> CMW1 and its extracellular protease

An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF₃SO₃) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF₃SO₃). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF₃SO₃, [BMIM]Cl, [BMIM]CF₃SO₃, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0–12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.     

Optimization of Ionic Liquid Pretreatment of Mixed Softwood by Response Surface Methodology and Reutilization of Ionic Liquid from Hydrolysate

We investigated the feasibility of producing bioethanol from mixed softwood pretreated with the ionic liquid 1-butyl-3-methylimidazolium acetate ([Bmim]Ac). The optimal pretreatment conditions were determined by response surface methodology to be 100°C for 15 h, and the fermentable sugar yield was estimated to be 92.5%. Efficient pretreatment of softwood was maintained even after reutilizing [Bmim]Ac up to four times. Through the enzymatic saccharification and subsequent fermentation, bioethanol was produced with 0.42 g/g of yield and 0.24 g/L/h of productivity, which clearly suggests that efficient and economical bioethanol production can be achieved by optimizing pretreatment processes and reutilizing ionic liquid.     

Thermal Stability and Activity Regain of Horseradish Peroxidase in Aqueous Mixtures of Imidazolium-Based Ionic Liquids

Thermal deactivation kinetics of horseradish peroxidase (HRP) were studied from 45 to 90 °C in phosphate buffer and 5–25% (v,w/v) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄] and 1-butyl-3-methylimidazolium chloride [BMIM][Cl]. HRP activity at 25 °C was not affected by the presence of ionic liquids up to 20% (v,w/v). Increasing the ionic liquids concentration up to 25% (v,w/v) changed the biphasic character of deactivation kinetics to an apparent single first-order step. The presence of 5–10% (v/v) [BMIM][BF₄] significantly improved HRP thermal stability with lower activation energies for the deactivation second phase (83–87 kJ mol⁻¹). After deactivation, enhanced activity regain of the enzyme, up to 70–80% of the initial activity, was found in 25% (v/v) [BMIM][BF₄] and 10% (w/v) [BMIM][Cl] and correlated to prevalence of the deactivation first phase.     

Lipase-catalyzed synthesis of glucose fatty acid ester using ionic liquids mixtures

Novozym 435-catalyzed synthesis of 6-O-lauroyl-d-glucose in ionic liquids (ILs) was investigated. The highest lipase activity was obtained in water-miscible [Bmim][TfO] which can dissolve high concentration of glucose, while the highest stability of lipase was shown in hydrophobic [Bmim][Tf(2)N]. The optimal activity and stability of lipase could be obtained in [Bmim][TfO] and [Bmim][Tf(2)N] mixture (1:1, v/v). Specifically, the activity of lipase was increased from 1.1 to 2.9 micromolmin(-1)g(-1) by using supersaturated glucose solution in this mixture, compared with reaction using saturated solution. After 5 times reuse of lipase, 86% of initial activity was remained in this mixture, while the residual activity in pure [Bmim][TfO] was 36%. Therefore, the productivity obtained by using ILs mixtures was higher than those in pure ILs.     

Ionic liquids as alternative co-solvents for laccase: study of enzyme activity and stability

The activity and stability of commercial laccase (DeniLite base) in three different water soluble ionic liquids (ILs) (1-ethyl-3-methylimidazolium 2-(2-methoxyethoxy) ethylsulfate, [emim][[MDEGSO4], 1-ethyl-3-methylimidazolium ethylsulfate, [emim][EtSO4], and 1-ethyl-3-methylimidazolium methanesulfonate, [emim][MeSO3]) have been studied and compared to that in two organic solvents (acetonitrile and dimethyl sulfoxide). Initial enzyme activities were similar among the ILs if the same conditions were used. A high reduction on initial enzyme activity was found with acidic pH (5.0). The effect of pH and solvent concentration on enzyme stability were investigated in more detail for 1 week. The enzyme maintained a high stability at pH 9.0 for all ILs tested. [emim][MDEGSO4] was the most promising IL for laccase with an activity loss of about 10% after 7 days of incubation. The kinetic studies in the presence of ABTS as substrate allowed to calculate the Michaelis- Menten parameters. Good agreement was found between experimental data and calculated values using the Michaelis-Menten mechanism, with a total average relative deviation of 2.1%.     

Kinetic resolution of rac-2-pentanol catalyzed by Candida antarctica lipase B in the ionic liquid, 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide

The ionic liquid, l-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide ([Bmim] [NTf2]), was used as a reaction medium for the kinetic resolution of rac-2-pentanol catalyzed by free Candida antarctica lipase B, using vinyl propionate at 2% (v/v) water content. The synthetic activity of lipase in [Bmim] [NTf2] was up 2.5-times greater than in hexane, and showed high enantioselectivity (ee > 99.99%). The optimal temperature and pH were 60 degrees C and 7, respectively. A decrease in water activity (aw) produced a decay in synthetic activity, and an exponential increase in selectivity.     

Radiation effects on microcrystalline cellulose in 1-butyl-3-methylimidazolium chloride ionic liquid

The radiation processing of cellulose in ionic liquids (ILs) demands a comprehensive knowledge of radiation effects on cellulose in ILs. Herein, gamma radiation-induced degradation kinetics of microcrystalline cellulose (MCC) in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) was studied by viscometry. The intrinsic viscosity of MCC in [Bmim]Cl decreased slightly with increasing dose; while chemical structure and crystalline state of cellulose has no obvious change up to 300kGy. The radiation degradation rate constant (k) of MCC in [Bmim]Cl was 2.60×10(-7)/kGy, lower than that of solid cellulose, but higher than that in N-methylmorpholine-N-oxide (NMMO) solvent. Furthermore, k value decreased to 1.12×10(-7)/kGy in dimethyl sulfoxide (DMSO)/[Bmim]Cl system due to the free radicals scavenging of DMSO. The radicals generated during irradiation play main role in the radiation degradation of MCC in [Bmim]Cl. This work provides a new way to control the average molecular weight of cellulose by radiation-induced degradation of cellulose in ILs.     

Environmentally friendly, efficient resolution of racemic secondary alcohols by lipase-catalyzed enantioselective transesterification in ionic liquids in the presence of organic bases

The lipase-catalyzed enantioselective transesterification of racemic secondary alcohols was studied using vinyl acetate as acyl donor in two imidazolium-based ionic liquids vs. hexane (Scheme), both in the absence and presence of catalytic amounts of organic bases such as triethylamine (Et(3)N) or pyridine. The organic bases generally enhanced both the rate and enantioselectivity of the reaction. Further, the system 1-butyl-3-methyl-1H-imidazolium hexafluorophosphate/Candida antarctica lipase B ([bmim][PF(6)]/CALB) could be readily recycled four times without significant loss in activity or enantioselectivity.     

Chemoenzymatic synthesis of feruloylated monoacyl- and diacyl-glycerols in ionic liquids

Feruloylated monoacyl- and diacyl-glycerols (FMAGs and FDAGs) are lipophilic antioxidants and potential UV absorbers. FMAGs and FDAGs were synthesized by a novel chemoenzymatic method: firstly, ferulic acid was esterified with glycerol to synthesize glyceryl ferulate, using p-toluenesulfonic acid as chemical catalyst in 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄); secondly, glyceryl ferulate was esterified with oleic acid to synthesize FMAGs and FDAGs, using Novozym 435 as biocatalyst in 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim]PF₆). The conversion of ferulic acid and yield of glyceryl ferulate in the first reaction were both 98%. The yields of FMAGs and FDAGs in the second reaction reached 34 ± 2% and 66 ± 3%, respectively.