Chemically Induced Polyploidization in Spathiphyllum wallisii Regel through Somatic Embryogenesis

Polyploid Spathiphyllum wallisii Regel 'Speedy' plants were obtained from somatic embryos induced on anther filaments exposed to mitosis inhibitors. Primary embryos yielded less polyploid plantlets than secondary embryos. Colchicine could be efficiently replaced by oryzalin or trifluralin (10 μM), resulting in an average yield of 5% polyploids. The mitosis inhibitors were directly added to the induction medium. Morphological differences between diploid and tetraploid S. wallisii hybrids were observed. Throughout our experiments flow cytometry was applied as an unambiguous screening tool. Ploidy breeding within the genus Spathiphyllum holds promises towards the development of tetraploid hybrids with an altered morphology, or triploids with a reduced fertility.     

Development and Characterization of a New TILLING Population of Common Bread Wheat (Triticum aestivum L.)

Mutagenesis is an important tool in crop improvement. However, the hexaploid genome of wheat (Triticum aestivum L.) presents problems in identifying desirable genetic changes based on phenotypic screening due to gene redundancy. TILLING (Targeting Induced Local Lesions IN Genomes), a powerful reverse genetic strategy that allows the detection of induced point mutations in individuals of the mutagenized populations, can address the major challenge of linking sequence information to the biological function of genes and can also identify novel variation for crop breeding. Wheat is especially well-suited for TILLING due to the high mutation densities tolerated by polyploids. However, only a few wheat TILLING populations are currently available in the world, which is far from satisfying the requirement of researchers and breeders in different growing environments. In addition, current TILLING screening protocols require costly fluorescence detection systems, limiting their use, especially in developing countries. We developed a new TILLING resource comprising 2610 M(2) mutants in a common wheat cultivar 'Jinmai 47'. Numerous phenotypes with altered morphological and agronomic traits were observed from the M(2) and M(3) lines in the field. To simplify the procedure and decrease costs, we use unlabeled primers and either non-denaturing polyacrylamide gels or agarose gels for mutation detection. The value of this new resource was tested using PCR with RAPD and Intron-spliced junction (ISJ) primers, and also TILLING in three selected candidate genes, in 300 and 512 mutant lines, revealing high mutation densities of 1/34 kb by RAPD/ISJ analysis and 1/47 kb by TILLING. In total, 31 novel alleles were identified in the 3 targeted genes and confirmed by sequencing. The results indicate that this mutant population represents a useful resource for the wheat research community. We hope that the use of this reverse genetics resource will provide novel allelic diversity for wheat improvement and functional genomics.     

Second Generation Biofuels: High-Efficiency Microalgae for Biodiesel Production

The use of fossil fuels is now widely accepted as unsustainable due to depleting resources and the accumulation of greenhouse gases in the environment that have already exceeded the “dangerously high” threshold of 450 ppm CO₂-e. To achieve environmental and economic sustainability, fuel production processes are required that are not only renewable, but also capable of sequestering atmospheric CO₂. Currently, nearly all renewable energy sources (e.g. hydroelectric, solar, wind, tidal, geothermal) target the electricity market, while fuels make up a much larger share of the global energy demand (～66%). Biofuels are therefore rapidly being developed. Second generation microalgal systems have the advantage that they can produce a wide range of feedstocks for the production of biodiesel, bioethanol, biomethane and biohydrogen. Biodiesel is currently produced from oil synthesized by conventional fuel crops that harvest the sun’s energy and store it as chemical energy. This presents a route for renewable and carbon-neutral fuel production. However, current supplies from oil crops and animal fats account for only approximately 0.3% of the current demand for transport fuels. Increasing biofuel production on arable land could have severe consequences for global food supply. In contrast, producing biodiesel from algae is widely regarded as one of the most efficient ways of generating biofuels and also appears to represent the only current renewable source of oil that could meet the global demand for transport fuels. The main advantages of second generation microalgal systems are that they: (1) Have a higher photon conversion efficiency (as evidenced by increased biomass yields per hectare): (2) Can be harvested batch-wise nearly all-year-round, providing a reliable and continuous supply of oil: (3) Can utilize salt and waste water streams, thereby greatly reducing freshwater use: (4) Can couple CO₂-neutral fuel production with CO₂ sequestration: (5) Produce non-toxic and highly biodegradable biofuels. Current limitations exist mainly in the harvesting process and in the supply of CO₂ for high efficiency production. This review provides a brief overview of second generation biodiesel production systems using microalgae.     

TILLING - a shortcut in functional genomics

Recent advances in large-scale genome sequencing projects have opened up new possibilities for the application of conventional mutation techniques in not only forward but also reverse genetics strategies. TILLING (Targeting Induced Local Lesions IN Genomes) was developed a decade ago as an alternative to insertional mutagenesis. It takes advantage of classical mutagenesis, sequence availability and high-throughput screening for nucleotide polymorphisms in a targeted sequence. The main advantage of TILLING as a reverse genetics strategy is that it can be applied to any species, regardless of its genome size and ploidy level. The TILLING protocol provides a high frequency of point mutations distributed randomly in the genome. The great mutagenic potential of chemical agents to generate a high rate of nucleotide substitutions has been proven by the high density of mutations reported for TILLING populations in various plant species. For most of them, the analysis of several genes revealed 1 mutation/200–500 kb screened and much higher densities were observed for polyploid species, such as wheat. High-throughput TILLING permits the rapid and low-cost discovery of new alleles that are induced in plants. Several research centres have established a TILLING public service for various plant species. The recent trends in TILLING procedures rely on the diversification of bioinformatic tools, new methods of mutation detection, including mismatch-specific and sensitive endonucleases, but also various alternatives for LI-COR screening and single nucleotide polymorphism (SNP) discovery using next-generation sequencing technologies. The TILLING strategy has found numerous applications in functional genomics. Additionally, wide applications of this throughput method in basic and applied research have already been implemented through modifications of the original TILLING strategy, such as Ecotilling or Deletion TILLING.     

New sources of soybean seed meal and oil composition traits identified through TILLING

Background  

Several techniques are available to study gene function, but many are less than ideal for soybean. Reverse genetics, a relatively new approach, can be utilized to identify novel mutations in candidate genes; this technique has not produced an allelic variant with a confirmed phenotype in soybean. Soybean raffinose synthase genes and microsomal omega-6 fatty acid desaturase genes were screened for novel alleles in mutagenized soybean populations.     

Polyploidization of transplanted cardiac myocytes

Pieces of cardiac ventricular tissue of late embryonic or 1-day postnatal rats, implanted beneath the kidney capsule of adult syngeneic hosts, formed viable, beating transplants. these transplants were investigated over a 40-day postoperative course. In the transplants, cellular binucleation and nuclear polyploidization occurred according to the same schedule as in the heart in situ. The composition of the classes of myocytes was identical both in the hearts in situ and in transplants, but the number of non-diploid myocytes in the intact heart reached 90%, whereas in transplants it varied from 30 to 60%. In contrast to the heart in situ, myocytes in transplants grew feebly after the phase of polyploidization. From these data one can conclude that under conditions of transplantation the temporal sequence of cellular binucleation and nuclear polyploidization follows the normal course, but that a greater number of myocytes remain in a diploid state than is the case in the normal heart. The growth of cardiac myocytes seems to be related to their level of function.     

Isolation and Characterisation of a High-Efficiency Desaturase and Elongases from Microalgae for Transgenic LC-PUFA Production

The production of long-chain polyunsaturated fatty acids from precursor molecules linoleic acid (LA; 18:2ω6) and α-linolenic acid (ALA; 18:3ω3) is catalysed by sequential desaturase and elongase reactions. We report the isolation of a front-end Δ6-desaturase gene from the microalgae Ostreococcus lucimarinus and two elongase genes, a Δ6-elongase and a Δ5-elongase, from the microalga Pyramimonas cordata. These enzymes efficiently convert their respective substrates when transformed in yeast (39–75% conversion for ω3 substrate fatty acids), and the Δ5-elongase in particular displays higher elongation efficiency (75% for conversion of eicosapentaenoic acid (20:5ω3) to docosapentaenoic acid (22:5ω3)) than previously reported genes. In addition, the Δ6-desaturase is homologous with acyl-CoA desaturases and shows a strong preference for the ω3 substrate ALA.     

Polyploidization of cardiac myocytes as a programmed event of ontogenesis

The pieces of ventricles of newborn rats, which consist of diploid myocytes in more than 95%, were transplanted under the renal capsule of a syngeneic adult rat. Within 35 days the transplants contained 40 to 60% of the cells with the double or even greater DNA content in the mononuclear and binuclear classes. The composition of the classes was similar unlike the number of the cells of a certain class in the transplant and in the heart of a 35 day old rat. A conclusion has been drawn that the polyploidization is programmed and the realization of this programme depends on the growth, work, and other factors but is expressed even at their minimal action in the transplant. The growth of the transplanted myocytes was weaker than in the heart. It is supposed that, unlike the polyploidization, the growth of the myocytes outside the cycle is, predominantly, functional-dependent.     

An increase of lycopene content in tomato fruit is associated with a novel Cyc-B allele isolated through TILLING technology

Tomato Cyc-B gene encodes a chromoplast-specific lycopene β-cyclase that converts lycopene to β-carotene during ripening of the fruit. By screening the tomato Red Setter mutant population with the TILLING method, we identified eight new alleles at the Cyc-B locus. Results of greenhouse phenotypic analysis revealed that the novel A949G Cyc-B allele produced modifications in the carotenoid profile and content of tomato petals and fruit. The cyc-b7 genotype, carrying the A949G Cyc-B allele, was therefore evaluated in an open field trial for standard agronomic traits as well as carotenoid content of the fruit. Results of the field trial confirmed that the induced A949G missense mutation favored the accumulation of lycopene in the fruit with no detrimental effects on the yield or on other agronomic and technological properties such as fruit firmness and Brix degree of fruit juice. On the basis of these results, it can be affirmed that the A949G Cyc-B allele constitutes a useful new genetic variant which can be used for improving carotenoid content in tomato fruit and for the development of new tomato commercial lines. Finally, the results presented here furthermore demonstrate that TILLING is a powerful methodology not only as a confirmatory system for gene functional analysis but also for selecting new gene variants useful for genetic improvement of important crops.     

Population Dynamics of Belonolaimus longicaudatusin a Cotton Production System

Belonolaimus longicaudatus is a recognized pathogen of cotton (Gossypium hirsutum), but insufficient information is available on the population dynamics and economic thresholds of B. longicaudatus in cotton production. In this study, data collected from a field in Florida were used to develop models predicting population increases of B. longicaudatus on cotton and population declines under clean fallow. Population densities of B. longicaudatus increased on cotton, reaching a carrying capacity of 139 nematodes/130 cm³ of soil, but decreased exponentially during periods of bare fallow. The model indicated that population densities should decrease each year of monocropped cotton, if an alternate host is not present between sequential cotton crops. Economic thresholds derived from published damage functions and current prices for cotton and nematicides varied from 2 to 5 B. longicaudatus/130 cm³ of soil, depending on the nematicide used.     

Myocardial Polyploidization Creates a Barrier to Heart Regeneration in Zebrafish

1. Download high-res image (334KB)
2. Download full-size image

     

TILLING技术在植物功能基因组及育种中的应用

随着拟南芥、水稻等模式植物基因组测序计划的全面完成,数据库中大量的DNA序列需要进行功能注释,而用传统的正向遗传学进行基因克隆和近年来发展的反向遗传学（如插入突变、反义RNA、RNAi等技术）方法已不能适应基因组学的发展需求,因此,研发大规模、高通量的基因功能分析方法成为当务之急。TILLING技术（Targeting induced local lesions in genomes）就是在基因组生物学大背景下出现的一种全新的反向遗传学技术。TILLING技术的基本步骤是通过化学诱变方法产生一系列点突变,经过PCR扩增放大和变性复性过程产生异源双链DNA分子,再通过特异性酶切和双色电泳分析识别异源双链中错配碱基,从而检测出突变发生的准确位置。由于具有高通量、大规模、高灵敏度和自动化等特点,能够适应植物功能基因组学研究的要求,TILLING技术已经和即将在功能基因组领域发挥越来越重要的作用。TILLING技术应用于已测序完成的拟南芥和水稻中的突变位点检测并取得了巨大成功;TILLING技术应用于农作物的品种改良,可以帮助实现快速、定向改良作物的品种,同时由于TILLING采用的化学诱变技术与传统诱变育种并无二致,因此在作物改良中采用TILLING技术不存在外源基因转入引发的转基因作物（GMO）争论;由TILLING技术发展来的EcoTILLING技术,具有通量高、成本低、定位准确等优点,可以很好地进行多态性检测和研究基因的功能,已成为开展物种DNA多态性检测和不同物种演替进化研究的有力工具。本文简要介绍了TILLING的原理及操作步骤,讨论了TILLING技术的特点和优点及TILLING技术的应用前景。     

Application of TILLING in Plant Improvement

TILLING (Targeting induced local lesions in genomes) is a general reverse-genetic strategy that is used to locate an allelic series of induced point mutations in genes of interest. High-throughput TILLING allows the rapid and cost-effective detection of induced point mutations in populations of chemically mutagenized individuals. The technique can be applied not only to model organisms but also to economically important organisms in plants. Owing to its full of advantages such as simple procedure, high sensitivity, and high efficiency, TILLING provides a powerful approach for gene discovery, DNA polymorphism assessment, and plant improvement. Coupled with other genomic resources, TILLING and EcoTILLING can be used immediately as a haplotyping tool in plant breeding for identifying allelic variation in genes exhibiting expression correlating with phenotypes and establishing an allelic series at genetic loci for the traits of interest in germplasm or induced mutants.     

Polyploidization by reticular speciation in Acipenseriform evolution: a working hypothesis

A working hypothesis to explain the polyploid evolution of Acipenserids as a result of reticular speciation is presented. It is assumed that the process of polyploidization is a result of multiple origin of poly-chromosomal sturgeon species and different DNA content despite similar karyotypes and low rate of mtDNA evolution.     

TILLING without a plough: a new method with applications for reverse genetics

TILLING (Targeting Induced Local Lesions IN Genomes) is a powerful reverse genetic technique that employs a mismatch-specific endonuclease to detect induced or natural DNA polymorphisms. Its advantages over other reverse genetic techniques include its applicability to virtually any organism, its facility for high-throughput and its independence of genome size, reproductive system or generation time. TILLING is currently being used for the detection of both induced and natural variation in several plant species.     

Progress in TILLING as a tool for functional genomics and improvement of crops

Food security is a global concern and substantial yield increases in crops are required to feed the growing world population. Mutagenesis is an important tool in crop improvement and is free of the regulatory restrictions imposed on genetically modified organisms. Targeting Induced Local Lesions in Genomes(TILLING), which combines traditional chemical mutagenesis with high‐throughput genome‐wide screening for point mutations in desired genes, offers a powerful way to create novel mutant alleles for both functional genomics and improvement of crops. TILLING is generally applicable to genomes whether small or large, diploid or evenallohexaploid, and shows great potential to address the major challenge of linking sequence information to the function of genes and to modulate key traits for plant breeding. TILLING has been successfully applied in many crop species and recent progress in TILLING is summarized below, especially on the developments in mutation detection technology, application of TILLING in gene functional studies and crop breeding. The potential of TILLING/EcoTILLING for functional genetics and crop improvement is also discussed. Furthermore, a small‐scale forward strategy including backcross and selfing was conducted to release the potential mutant phenotypes masked in M2(or M3) plants.     

A Mutant Brassica napus (Canola) Population for the Identification of New Genetic Diversity via TILLING and Next Generation Sequencing

We have generated a Brassica napus (canola) population of 3,158 EMS-mutagenised lines and used TILLING to demonstrate that the population has a high enough mutation density that it will be useful for identification of mutations in genes of interest in this important crop species. TILLING is a reverse genetics technique that has been successfully used in many plant and animal species. Classical TILLING involves the generation of a mutagenised population, followed by screening of DNA samples using a mismatch-specific endonuclease that cleaves only those PCR products that carry a mutation. Polyacrylamide gel detection is then used to visualise the mutations in any gene of interest. We have used this TILLING technique to identify 432 unique mutations in 26 different genes in B. napus (canola cv. DH12075). This reflects a mutation density ranging from 1/56 kb to 1/308 kb (depending on the locus) with an average of 1/109 kb. We have also successfully verified the utility of next generation sequencing technology as a powerful approach for the identification of rare mutations in a population of plants, even in polyploid species such as B. napus. Most of the mutants we have identified are publically available.     

Global Production Increased by Spatial Heterogeneity in a Population Dynamics Model

Spatial and temporal heterogeneity are often described as important factors having a strong impact on biodiversity. The effect of heterogeneity is in most cases analyzed by the response of biotic interactions such as competition of predation. It may also modify intrinsic population properties such as growth rate. Most of the studies are theoretic since it is often difficult to manipulate spatial heterogeneity in practice. Despite the large number of studies dealing with this topics, it is still difficult to understand how the heterogeneity affects populations dynamics. On the basis of a very simple model, this paper aims to explicitly provide a simple mechanism which can explain why spatial heterogeneity may be a favorable factor for production. We consider a two patch model and a logistic growth is assumed on each patch. A general condition on the migration rates and the local subpopulation growth rates is provided under which the total carrying capacity is higher than the sum of the local carrying capacities, which is not intuitive. As we illustrate, this result is robust under stochastic perturbations.     

Progress in TILLING as a tool for functional genomics and improvement of crops

Food security is a global concern and substantial yield increases in crops are required to feed the growing world population. Mutagenesis is an important tool in crop improvement and is free of the regulatory restrictions imposed on genetically modified organisms. Targeting Induced Local Lesions in Genomes（TILLING）, which combines traditional chemical mutagenesis with high‐throughput genome‐wide screening for point mutations in desired genes, offers a powerful way to create novel mutant alleles for both functional genomics and improvement of crops. TILLING is generally applicable to genomes whether small or large, diploid or evenallohexaploid, and shows great potential to address the major challenge of linking sequence information to the function of genes and to modulate key traits for plant breeding. TILLING has been successfully applied in many crop species and recent progress in TILLING is summarized below, especially on the developments in mutation detection technology, application of TILLING in gene functional studies and crop breeding. The potential of TILLING/EcoTILLING for functional genetics and crop improvement is also discussed. Furthermore, a small‐scale forward strategy including backcross and selfing was conducted to release the potential mutant phenotypes masked in M2（or M3） plants.