Characterization of benzaldehyde lyase from Pseudomonas fluorescens: A versatile enzyme for asymmetric C–C bond formation

The thiamin-diphosphate-dependent enzyme benzaldehyde lyase is a very import catalyst for chemoenzymatic synthesis catalyzing the formation and cleavage of (R)-hydroxy ketones. We have studied the stability of the recombinant enzyme and some enzyme variants with respect to pH, temperature, buffer salt, cofactors and organic cosolvents. Stability of BAL in chemoenzymatic synthesis requires the addition of cofactors to the buffer. Reaction temperature should not exceed 37 °C. The enzyme is stable between pH 6 and 8, with pH 8 being the pH-optimum of both the lyase and the ligase reaction. Potassium phosphate and Tris were identified as optimal reaction buffers and the addition of 20 vol% DMSO is useful to enhance both the solubility of aromatic substrates and products and the stability of BAL. The initial broad product range of BAL-catalyzed reactions has been enlarged to include highly substituted hydroxybutyrophenones and aliphatic acyloins.     

Probing the active center of benzaldehyde lyase with substitutions and the pseudosubstrate analogue benzoylphosphonic acid methyl ester

Benzaldehyde lyase (BAL) catalyzes the reversible cleavage of ( R)-benzoin to benzaldehyde utilizing thiamin diphosphate and Mg (2+) as cofactors. The enzyme is important for the chemoenzymatic synthesis of a wide range of compounds via its carboligation reaction mechanism. In addition to its principal functions, BAL can slowly decarboxylate aromatic amino acids such as benzoylformic acid. It is also intriguing mechanistically due to the paucity of acid-base residues at the active center that can participate in proton transfer steps thought to be necessary for these types of reactions. Here methyl benzoylphosphonate, an excellent electrostatic analogue of benzoylformic acid, is used to probe the mechanism of benzaldehyde lyase. The structure of benzaldehyde lyase in its covalent complex with methyl benzoylphosphonate was determined to 2.49 A (Protein Data Bank entry 3D7K ) and represents the first structure of this enzyme with a compound bound in the active site. No large structural reorganization was detected compared to the complex of the enzyme with thiamin diphosphate. The configuration of the predecarboxylation thiamin-bound intermediate was clarified by the structure. Both spectroscopic and X-ray structural studies are consistent with inhibition resulting from the binding of MBP to the thiamin diphosphate in the active centers. We also delineated the role of His29 (the sole potential acid-base catalyst in the active site other than the highly conserved Glu50) and Trp163 in cofactor activation and catalysis by benzaldehyde lyase.     

Comparison of phospho- and dephospho-ATP citrate lyase

The dephospho- form of rat liver citrate lyase has been prepared by treating purified [³²P]-ATP citrate lyase with a partially purified phosphatase. A comparison of the properties of the phospho- and dephosphoenzyme has been performed. The pH optima were the same for both forms of the enzyme in four different buffer systems although the optimum values varied identically for both enzyme forms with the buffer. Both the phospho- and dephosphoenzymes show the same kinetic properties except for the K_m observed for ATP in 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid buffer system where it was 54 μm for the phosphoenzyme and 292 μm for the dephosphoenzyme. The present study also indicates that both enzymes are cleaved by trypsin and lysosomal proteases in a similar manner. Both forms of the enzyme tend to associate with mitochondria to the same extent and both enzymes have identical temperature stability curves.     

A study on increasing enzymatic stability and activity of Baliospermum montanum hydroxynitrile lyase in biocatalysis

HNL catalysis is usually carried out in a biphasic solvent and at low pH to suppress the non-enzymatic synthesis of racemic cyanohydrins. However, enzyme stability under these conditions remain a challenge. We have investigated the effect of different biocatalytic parameters, i.e., pH, temperature, buffer concentrations, presence of stabilizers, organic solvents, and chemical additives on the stability of Baliospermum montanum hydroxynitrile lyase (BmHNL). Unexpectedly, glycerol (50 mg/mL) added BmHNL biocatalysis had produced >99% of (S)-mandelonitrile from benzaldehyde, while without glycerol it is 54% ee. Similarly, BmHNL had converted 3-phenoxy benzaldehyde and 3,5-dimethoxy benzaldehyde, to their corresponding cyanohydrins in the presence of glycerol. Among the different stabilizers added to BmHNL at low pH, 400 mg/mL of sucrose had increased enzyme’s half-life more than fivefold. BmHNL’s stability study showed half-lives of 554, 686, and 690 h at its optimum pH 5.5, temperature 20 °C, buffer concentration, i.e., 100 mM citrate-phosphate pH 5.5. Addition of benzaldehyde as inhibitor, chemical additives, and the presence of organic solvents have decreased both the stability and activity of BmHNL, compared to their absence. Secondary structural study by CD-spectrophotometer showed that BmHNL’s structure is least affected in the presence of different organic solvents and temperatures.     

Optimization of Large Scale Preparation of 13-(S)-Hydroperoxy-9Z, 11E-Octadecadienoic Acid Using Soybean Lipoxygenase. Application to the Chemoenzymatic Synthesis of (+)-Coriolic Acid

The optimization of 13-S-hydroperoxy-9Z, 11E-octadecadienoic acid synthesis is described using lipoxygenase-1 from soybeans at high substrate concentration. The optimal values of the tested parameters are as follows: oxygen pressure 2.5 bar, temperature 5°C, pH 11, enzyme concentration 4 mg/ml and substrate concentration 0.1 M. All these values were used in a single reaction, allowing chemoenzymatic synthesis of gram amounts of (+)-coriolic acid (99%, e.e. 97%) with a 54% yield starting from linoleic acid.     

Synthesis of (R)-2-trimethylsilyl-2-hydroxyl-propionitrile catalyzed by (R)-hydroxynitrile lyase from Prunus japonica seed meal

Synthesis of (R)-2-trimethylsilyl-2-hydroxyl-propionitrile via asymmetric transcyanation of acetyltrimethylsilane with acetone cyanohydrin in an aqueous/organic biphasic system catalyzed by (R)-hydroxynitrile lyase from Prunus japonica seed meal was successfully carried out for the first time. The optimal volume ratio of aqueous to organic phase, buffer pH value and reaction temperature were 15% (v/v), 5.0 and 30°C, respectively, under which both substrate conversion and product enantiomeric excess (ee) were 99%. Silicon atom in the substrate showed great effect on the reaction. Acetyltrimethylsilane was a much better substrate for (R)-hydroxynitrile lyase from Prunus japonica than its carbon analogue.     

Metabolism of threo-beta-fluoroaspartate by H4 cells. Inhibition of adenylosuccinate lyase by fluoro analogs of its substrates

DL-threo-beta-Fluoroaspartate is a substrate for the two enzymes in de novo purine biosynthesis that use aspartate, namely 4-(N-succino)-5-aminoimidazole-4-carboxamide ribonucleotide (SAICAR) synthetase and adenylosuccinate synthetase. With both enzymes, Vmax with threo-beta-fluoroaspartate is about 50% of that observed with aspartate. The products of the two enzyme reactions, threo-beta-fluoro-SAICAR and threo-beta-fluoroadenylosuccinate, are inhibitors of adenylosuccinate lyase purified from rat skeletal muscle. In 20 mM phosphate buffer, pH 7.4, the KI values for threo-beta-fluoro-SAICAR are 5 and 3 microM and for threo-beta-fluoroadenylosuccinate are 3 and 1 microM, in the SAICAR and adenylosuccinate cleavage reactions, respectively. In 20 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid buffer, pH 7.4, the KI values for threo-beta-fluoro-SAICAR are approximately 0.14 and 0.03 microM and for threo-beta-fluoroadenylosuccinate are approximately 0.05 and 0.015 microM, in the same two reactions, respectively. These KI values are one-half to one-hundredth of the Km values for SAICAR and adenylosuccinate, the two substrates of adenylosuccinate lyase. After an 8-h incubation with 45 microM threo-beta-fluoroaspartate, H4 cells contain 200-300 microM threo-beta-fluoro-SAICAR and 60-90 microM threo-beta-fluoroadenylosuccinate. These concentrations of fluoro analogs are sufficient to substantially inhibit adenylosuccinate lyase and hence the de novo synthesis of purines in H4 cells.     

Synthesis of (R)-2-trimethylsilyl-2-hydroxyl-propionitrile catalyzed by (R)-hydroxynitrile lyase from Prunus japonica seed meal

Synthesis of (R)-2-trimethylsilyl-2-hydroxyl-propionitrile via asymmetric transcyanation of acetyltrimethylsilane with acetone cyanohydrin in an aqueous/organic biphasic system catalyzed by (R)-hydroxynitrile lyase from Prunus japonica seed meal was successfully carried out for the first time. The optimal volume ratio of aqueous to organic phase, buffer pH value and reaction temperature were 15% (v/v), 5.0 and 30°C, respectively, under which both substrate conversion and product enantiomeric excess (ee) were 99%. Silicon atom in the substrate showed great effect on the reaction. Acetyltrimethylsilane was a much better substrate for (R)-hydroxynitrile lyase from Prunus japonica than its carbon analogue.     

Esterification reactions catalyzed by Chromobacterium viscosum lipase in CTAB-based microemulsion systems

Chromobacterium viscosum (CV) lipase solubilized in water-in-oil (w/o) microemulsions based on the cationic surfactant hexadecyltrimethylammonium bromide (CTAB) have been used for multigram-scale ester synthesis, including the kinetic resolution of a secondary alcohol. The stability of CV lipase in all the CTAB microemulsions studied was excellent and was superior to that observed in aqueous buffer at the same pH and temperature. Kinetic studies were performed using the synthesis of ethylhexadecanoate as a model reaction. Under pseudo-first-order conditions, the synthesis rates were linearlydependent on the enzyme and fatty acid concentrations and the R dependence shows the characteristic bell-shaped curve (where R = [H(2)O]/[surfactant]). The dependence of enzyme activity toward octyldecanoate synthesis on the pH of the dispersed buffer phase is in marked contrast to that observed for the pH dependence of CV lipase toward p-nitrophenylbutyrate hydrolysis. In the former case, the pH-activity profile is approximately sigmoidal, which may reflect the ionization state of the fatty acid substrate. In the latter case, the pH dependence is minimal at both R = 10 and R = 50, suggesting the enzyme does not experience a changed pH environment. Inclusion of a pH-sensitive probe molecule into those incubations containing fatty acid clearly demonstrates that the probe molecule experiences a changed environment consistent with that expected for the selected buffer. An in situ Fourier transform nuclear magnetic resonance (FT-NMR) assay has been developed which allows continuous monitoring of the esterification reactions, thereby providing an additional means of determining initial rates. The method may be of general value for lipase assays in microemulsions since it may provide, at the same time, information regarding enzyme regioselectivity. (c) 1995 John Wiley & Sons, Inc.     

Biochemical peculiarities of benzaldehyde lyase from Pseudomonas fluorescens Biovar I in the dependency on pH and cosolvent concentration

Benzaldehyde lyase from Pseudomonas fluorescens (BAL, EC 4.1.2.38) is a versatile catalyst for stereoselective carboligations. Nevertheless, rather inconsistent data about its biochemical properties are reported in literature. In this study, the dependency of BAL activity on ionic strength, pH, and concentration of DMSO was for the first time systematically investigated and interpreted. It was found that the activity of BAL strongly depends on all three parameters, and a correlation exists between the dependency on pH and DMSO concentration. This correlation could be explained by an interaction of DMSO with an ionic amino acid in the catalytic site. A model-based analysis indicated that the pK_a of this residue shifts to the alkaline milieu upon addition of DMSO. Consequently, the optimum pH also shifts to alkaline values when DMSO is present. Potentiometric experiments confirmed that the pK_a can most probably be attributed to Glu50 which governs the activity increase of BAL on the acidic limb of its pH-activity profile. With these findings, the apparently contradicting data from literature become comprehensible and optimal reaction conditions for synthesis can easily be deduced.     

A kinetic model for enzyme interfacial activity and stability: pa-hydroxynitrile lyase at the diisopropyl ether/water interface

A kinetic framework is developed to describe enzyme activity and stability in two-phase liquid-liquid systems. In particular, the model is applied to the enzymatic production of benzaldehyde from mandelonitrile by Prunus amygdalus hydroxynitrile lyase (pa-Hnl) adsorbed at the diisopropyl ether (DIPE)/aqueous buffer interface (pH = 5.5). We quantitatively describe our previously obtained experimental kinetic results (Hickel et al., 1999; 2001), and we successfully account for the aqueous-phase enzyme concentration dependence of product formation rates and the observed reaction rates at early times. Multilayer growth explains the early time reversibility of enzyme adsorption at the DIPE/buffer interface observed by both enzyme-activity and dynamic-interfacial-tension washout experiments that replace the aqueous enzyme solution with a buffer solution. The postulated explanation for the unusual stability of pa-Hnl adsorbed at the DIPE/buffer interface is attributed to a two-layer adsorption mechanism. In the first layer, slow conformational change from the native state leads to irreversible attachment and partial loss of catalytic activity. In the second layer, pa-Hnl is reversibly adsorbed without loss in catalytic activity. The measured catalytic activity is the combined effect of the deactivation kinetics of the first layer and of the adsorption kinetics of each layer. For the specific case of pa-Hnl adsorbed at the DIPE/buffer interface, this combined effect is nearly constant for several hours resulting in no apparent loss of catalytic activity. Our proposed kinetic model can be extended to other interfacially active enzymes and other organic solvents. Finally, we indicate how interfacial-tension lag times provide a powerful tool for rational solvent selection and enzyme engineering.     

The catalytic potency of β-glucosidase from Pyrococcus furiosus in the direct glucosylation reaction

Enzymes from extremophiles operate at conditions that are different from their ‘normal’ counterparts, and are therefore a useful extension of the enzyme toolbox. In this paper, the direct glucosylation reaction mediated by a hyperthermophilic β-glucosidase from Pyrocuccus furiosus was investigated. Hexanol was successfully coupled to glucose with this enzyme. A preliminary study was conducted to improve the product yield. A maximum product concentration of 12.9 g.l⁻¹ was attainable by increasing the glucose concentration to the maximum solubility of 2000 g.(kg buffer solution)⁻¹ at the reaction temperature. The highest glucose based yield of 2.64% was achieved with a glucose concentration of 900 g.(kg buffer solution)⁻¹ at a reaction temperature of 65°C and a pH of 6.0. Performing the reaction at higher pH and temperature led to lower product concentrations. This was caused by deactivation of the enzyme accompanied by browning of the reaction mixture. A pH of 4.4 did have a negative effect on both the storage and the operational stability of the enzyme.     

Immobilization–stabilization of a new recombinant glutamate dehydrogenase from <Emphasis Type="Italic">Thermus thermophilus</Emphasis>

The genome of Thermus thermophilus contains two genes encoding putative glutamate dehydrogenases. One of these genes (TTC1211) was cloned and overexpressed in Escherichia coli. The purified enzyme was a trimer that catalyzed the oxidation of glutamate to alpha-ketoglutarate and ammonia with either NAD+ or NADP+ as cofactors. The enzyme was also able to catalyze the inverse reductive reaction. The thermostability of the enzyme at neutral pH was very high even at 70 degrees C, but at acidic pH values, the dissociation of enzyme subunits produced the rapid enzyme inactivation even at 25 degrees C. The immobilization of the enzyme on glyoxyl agarose permitted to greatly increase the enzyme stability under all conditions studied. It was found that the multimeric structure of the enzyme was stabilized by the immobilization (enzyme subunits could be not desorbed from the support by boiling it in the presence of sodium dodecyl sulfate). This makes the enzyme very stable at pH 4 (e.g., the enzyme activity did not decrease after 12 h at 45 degrees C) and even improved the enzyme stability at neutral pH values. This immobilized enzyme can be of great interest as a biosensor or as a biocatalyst to regenerate both reduced and oxidized cofactors.     

Properties of fibre-entrapped aspartase

Aspartase (l-aspartate ammonia lyase, EC 4.3.1.1) was extracted and purified from Escherichia intermedia cells. The enzyme was entrapped in cellulose triacetate porous fibres and the properties of the immobilized enzyme compared with those of the free enzyme. Similar behaviour was observed with regard to optimum pH, temperature, heat stability and kinetic constants. The stability of the entrapped enzyme was tested under operating conditions in a series of batch reactions. Good results were obtained for both the stability and the efficiency of the immobilized enzyme. The potential use of aspartase fibres for the production of l-aspartic acid is discussed.     

Culture conditions for the production of pectinolytic enzymes by the white-rot fungus Trametes trogii on a laboratory scale

Different cultural parameters that regulate pectinolytic enzyme production in vitro by Trametes trogii were studied. When grown in a medium containing pectin, T. trogii produced extracellular polymethylgalacturonase, polygalacturonase and pectin lyase but no pectate lyase activity. No significant differences in the maximum enzyme activities measured were observed with the addition of xylan, carboxymethylcellulose or both to the medium containing pectin. The addition of glucose to that medium considerably decreases all the activities studied, and in a medium with glucose as the sole carbon source no galacturonase activity could be measured, and pectin lyase activity was at its minimum. The low synthesis of pectin lyase in cultures containing glucose suggests that this enzyme is constitutive in contrast to the polygalacturonases that were not detected. The increase in pectin concentration stimulated growth and enzyme production. The highest specific activities were attained with the greatest concentration tested (15 g/l). Casamino acids were the best nitrogen source for enzyme production. Maximum growth was measured at pH 3.3; pH values of around 4.5 stimulated enzyme production, but high pectinase activities were also detected in media with more alkaline initial pH values (6.2 for galacturonases and 6.6 for lyases), probably owing to the specific induction of particular isoforms. In the range of 23 to 28°C, good results were obtained in growth as well as in enzyme production. The addition of Tween 80 promoted growth and gave the highest yield of polymethylgalacturonase and pectin lyase (0.37 and 36.2 E.U./ml, respectively). The highest polygalacturonase activity (1.1 E.U/ml) was achieved with polyethylene glycol. Tween 20 and Triton X-100 inhibited growth and pectinase production.     

A study of the reaction catalysed by alginate lyase VI from the sea mollusc, Littorina sp.

The molecular weight of polymeric alginic acid digested by alginate lyase (poly(1,4-beta-D-mannuronide) lyase, EC 4.2.2.3) was determined at various stages of the lysis. Low molecular weigh fragments were detected only after 60-100% lysis. Some high molecular weight fragments remained intact even after addition of a fresh aliquot of enzyme to the digest. The enzyme showed maximal activity at pH 5.6 in 0.05 M salt. Enzyme activity was stimulated by addition of 7.5 mM CaCl2 and 0.2 M NaCl, when the pH optimum was between 8 and 8.5. Only mannuronic acid was detected at the reducing end of fragments after exhausive enzymolysis, reduction and hydrolysis. On studying the reaction products by NMR, a double-bound signal (sigma = 5.98 ppm) was observed. A considerable decrease in intensity of the D-mannuronic acid residue signal was detected after hydrolysis of alginate lyase VI on poly-(ManUA-GulUA), but not poly(GulUA). The results suggest that alginate lyase VI may be an endoalginate lyase that splits glycoside bonds only between two mannuronic acid residues.     

Immobilized enzyme system for determination of sialic acid in serum or urine.

An immobilized enzyme system has been developed and employed to determine the concentration of sialic acid (N-acetylneuraminic acid) in human serum and urine. Two enzyme pairs, neuramindiase-Neu-5-Ac lyase and pyruvate oxidase-peroxidase, have been respectively co-immobilized onto 1,12-aminododecane-agarose with glutaraldehyde. The relative specific activity of the co-immobilized neuraminidase and Neu-5-Ac lyase were 60% and 78%, and those of pyruvate oxidase and peroxidase were 50% and 95% of the corresponding soluble enzymes, respectively. The optimal reaction pH at 37 degrees C for each of the co-immobilized enzymes was about one pH unit higher than that of the corresponding soluble enzyme. The optimal reaction temperature of each enzyme was increased as a result of immobilization. The thermal stability at 45 degrees C of the immobilized neuraminidase, Neu-5-Ac lyase, pyruvate oxidase, and peroxidase were increased 80-, 83-, 115-, and 147-fold, respectively. Km and Vm of each immobilized and co-immobilized enzyme have also been determined. The system provided a convenient and rapid method to determine the concentration of total sialic acid without pretreatment of the sample. The results correlated satisfactorily with those obtained by using a soluble enzyme system. The co-immobilized enzymes were stable for at least 1 year of 500 tests when used repeatedly. The system is thus a reproducible and reliable novel assay method for sialic acid in the serum or urine sample.     

Multisite inhibition of Pinus pinea isocitrate lyase by phosphate

Our results show that the phosphate ion is a nonlinear competitive inhibitor of Pinus pinea isocitrate lyase. In addition, this compound induces a sigmoidal response of the enzyme, which usually exhibits standard Michaelis-Menten kinetics. This peculiar behavior of P. pinea isocitrate lyase could be explained by a dimer (two-site) model, in which phosphate binds cooperatively, but the affinity of the vacant site for substrate (the magnesium-isocitrate complex) remains the same. As a result, the interaction of phosphate with free enzyme produces an inhibitor-enzyme-inhibitor species that is of significant importance in determining reaction rate; a possible regulatory role of the glyoxylate cycle by inorganic phosphate is suggested. The mode of phosphate inhibition is consistent with both the mechanism for magnesium ion activation of P. pinea isocitrate lyase and its site heterogeneity. Our results explain the cooperative effects observed by some authors in kinetic studies of isocitrate lyase carried out in phosphate buffers and also account for the higher K(m) values determined by using such assay systems. Phosphate buffer should be avoided in performing isocitrate lyase kinetics.     

灵芝漆酶转化除草剂2,4-D丁酯的初步研究

来自灵芝ST（Ganoderma sp.ST）的漆酶在无氧化还原介质存在时能够直接转化苯氧羧酸类除草剂2,4-D丁酯。对酶转化2,4-D丁酯的条件进行了优化,包括pH值、给酶量和反应温度。灵芝ST漆酶在pH值4.0～8.0和15～30℃的范围内均能够有效转化2,4-D丁酯（初始浓度0.5mg/L）,在最适的pH值7.0、给酶量25U/L和温度30℃条件下,转化率随着酶作用时间的延长而提高,在24h左右达到最高（〉99.5%）。酶活力在作用时间内稳定,并且用自来水代替缓冲液获得的转化率相当。