Lactococcus lactis release from calcium alginate beads.

Cell release during milk fermentation by Lactococcus lactis immobilized in calcium alginate beads was examined. Numbers of free cells in the milk gradually increased from 1 x 10(6) to 3 x 10(7) CFU/ml upon successive reutilization of the beads. Rinsing the beads between fermentations did not influence the numbers of free cells in the milk. Cell release was not affected by initial cell density within the beads or by alginate concentration, although higher acidification rates were achieved with increased cell loading. Coating alginate beads with poly-L-lysine (PLL) did not significantly reduce the release of cells during five consecutive fermentations. A double coating of PLL and alginate reduced cell release by a factor of approximately 50. However, acidification of milk with beads having the PLL-alginate coating was slower than that with uncoated beads. Immersing the beads in ethanol to kill cells on the periphery reduced cell release, but acidification activity was maintained. Dipping the beads in aluminum nitrate or a hot CaCl2 solution was not as effective as dipping them in ethanol. Ethanol treatment or heating of the beads appears to be a promising method for maintaining acidification activity while minimizing viable cell release due to loosely entrapped cells near the surface of the alginate beads.     

Lactococcus lactis release from calcium alginate beads.

Cell release during milk fermentation by Lactococcus lactis immobilized in calcium alginate beads was examined. Numbers of free cells in the milk gradually increased from 1 x 10(6) to 3 x 10(7) CFU/ml upon successive reutilization of the beads. Rinsing the beads between fermentations did not influence the numbers of free cells in the milk. Cell release was not affected by initial cell density within the beads or by alginate concentration, although higher acidification rates were achieved with increased cell loading. Coating alginate beads with poly-L-lysine (PLL) did not significantly reduce the release of cells during five consecutive fermentations. A double coating of PLL and alginate reduced cell release by a factor of approximately 50. However, acidification of milk with beads having the PLL-alginate coating was slower than that with uncoated beads. Immersing the beads in ethanol to kill cells on the periphery reduced cell release, but acidification activity was maintained. Dipping the beads in aluminum nitrate or a hot CaCl2 solution was not as effective as dipping them in ethanol. Ethanol treatment or heating of the beads appears to be a promising method for maintaining acidification activity while minimizing viable cell release due to loosely entrapped cells near the surface of the alginate beads.     

Effects of different fragments of the fibronectin molecule on latex bead translocation along neural crest migratory pathways

Previous studies from this laboratory have utilized latex beads as probes of embryonic migratory pathways. After microinjection into embryos at the time of neural crest migration, uncoated latex polystyrene beads were found to translocate to ventral sites and to settle in the vicinity of endogenous neural crest derivatives. However, latex beads coated with fibronectin did not translocate ventrally, but remained associated with cells surrounding the implantation site. Fibronectin is a large glycoprotein with a variety of biological activities and multiple binding domains. Here, the binding activities which might be responsible for immobilization of the fibronectin-coated beads are examined. Latex beads were coated with three types of fragments of the fibronectin molecule representing different functional domains: (i) a 66-kDa fragment containing collagen-binding activity; (ii) a mixture of 45- and 32-kDa fragments containing heparin-binding activity; and (iii) a 120-kDa fragment containing cell-binding activity. The beads coated with fibronectin fragments were injected into the newly formed trunk somites of avian embryos. After injection, beads coated with either the heparin- or the collagen-binding domain translocated ventrally and distributed analogously to uncoated latex beads. In contrast, the majority of beads coated with the fibronectin cell-binding domain did not translocate but remained associated with dermamyotomal cells surrounding the injection site. The cell-binding fragment, however, was not as effective as the intact fibronectin molecule in preventing translocation of the beads. The results suggest that the cell-binding domain is primarily responsible for restriction of fibronectin beads from the ventral neural crest pathway. Because intact fibronectin is more effective at immobilizing beads than is the cell-binding fragment, other binding domains of fibronectin, more efficient coating with intact fibronectin, or crosslinking of intact fibronectin molecules may also play some role in immobilization of the beads at the implantation site.     

Inhibition of gap-junctional intercellular communication and enhanced binding of fibronectin-coated latex beads by stimulation of DNA synthesis in quiescent 3T3-L1 cells

To clarify the modulation of intercellular communication via gap junctions, associated with the growth induction of quiescent 3T3-L1 cells, we investigated the gap-junctional intercellular communication in growth-stimulated cells that were able to bind fibronectin-coated beads. When quiescent 3T3-L1 cells were incubated with fibronectin-coated beads for the first 2 h after the addition of calf serum, 24.0% of the cells bound and phagocytosed beads. Among the cells with bound beads, the percentage of the cells labeled concurrently with bromodeoxyuridine was 63.7% when examined 13 h after the addition of calf serum. Transient reduction of dye-coupling, measured with Lucifer Yellow CH, was observed only in the cells with bound beads 2 h after addition of calf serum, but it was not observed in the cells without bound beads. When the quiescent cells were incubated with fibronectin-coated beads for 2 h from 4-6 h after the addition of calf serum, the percentage of cells with bound beads increased to 53.1%, but the decrease in dye-coupling among the cells with bound beads was slight. These results suggest that the induction of cell growth causes a transient reduction in gap-junctional intercellular communication in 3T3-L1 cells with bound fibronectin-coated beads.     

Mast cells: an unexpected finding in the modulation of cutaneous wound repair by charged beads

Increased numbers of mast cells are affiliated with a broad spectrum of pathologic skin conditions, including ulcers, atopic dermatitis, neurofibromatosis, hemangiomas, keloids, and hypertrophic scars. It has been proposed that mast cells play a primary pathophysiologic role in these disorders and that their presence represents not merely a secondary event. While investigating their recent hypothesis that positively charged cross-linked diethylaminoethyl dextran (CLDD) beads potentiate cutaneous wound healing, the authors serendipitously observed increased numbers of mast cells in the deep dermis of wounds treated with CLDD beads. The authors propose that mast cells may play an important role in the modulation of healing seen with CLDD beads. Incisional wounds were studied in 30 Sprague-Dawley rats partitioned into two groups that were killed 7 or 14 days after wounding. The wounds were treated with positively, negatively, or neutrally charged CLDD beads. Physiologic saline served as a control. At the designated times after incisional wounding, biopsy specimens were tested for wound breaking strength or processed for histologic testing, fixed in 4% paraformaldehyde, and stained with Giemsa and Goldner-Masson trichrome. Mast cells were counted under light microscopy in a blinded fashion and were expressed as the number of cells per millimeter squared. Significant increases in the number of mast cells were observed in the deep dermis of incisional wounds after implantation with positively or negatively charged CLDD beads. In contrast, neutrally charged beads had no effect on mast cell numbers. At 7 days, the incisions treated with positively charged beads averaged 2.1 times more mast cells compared with those treated with physiologic saline or neutrally charged beads, whereas the incisions treated with negatively charged beads displayed 3.2 times more mast cells. By day 14, the incisions treated with positively charged beads averaged 2.5 times more mast cells than those wounds treated with saline or neutrally charged beads; the incisions treated with negatively charged CLDD beads had 3.4 times more mast cells. The 7-day tensiometric data indicated that wounds treated with negatively charged CLDD beads had increased breaking strength compared with wounds treated with neutrally charged beads or saline (1.8 and 1.7 times, respectively; p = 0.01 and p = 0.02). Wounds treated with positively charged beads also showed increased breaking strength compared with wounds treated with neutrally charged beads or saline (1.5 and 1.4 times greater); however, this did not reach statistical significance. There was no apparent difference in breaking strength when neutrally charged beads were compared with those treated with saline. At 14 days, there was no statistically significant difference in wound breaking strength between different treatments. These findings are clinically germane to the assessment of proposed therapeutic applications of CLDD beads for a variety of impaired wound-healing states. Furthermore, if increased mast cell populations are intimately linked to hypertrophic scar and keloid formation, the results of the authors' study suggest that CLDD bead therapy of cutaneous wounds may lead to pathologic wound healing in humans.     

Development and characterization of simulant pancreatic islets

Insulin is stored in pancreatic islets as a zinc-insulin complex, and stimulating the islets results in the release of insulin and zinc. Simulant pancreatic islet beads have been developed using agarose beads (50-250 micro m diameter) derivatized with iminodiacetic acid that have been loaded with zinc. A qualitative comparison of the simulant beads with pancreatic islets has been made by staining with dithizone and a zinc-binding fluorescent dye, TSQ. The binding capacity of simulant beads was determined to be 34 micro mol Zn(2+)/g of dried beads using anodic stripping voltammetry. Hydrochloric acid was used to release zinc from beads to mimic the secretion of insulin from pancreatic islets and a release profile was established. The simulant beads can be used to optimize the islet isolation process and reduce the use of real islets in method development.     

Latex beads as probes of a neural crest pathway: effects of laminin, collagen, and surface charge on bead translocation

In the trunk region of avian embryos, neural crest cells migrate along two pathways: dorsally just under the ectoderm, and ventrally between the neural tube and the somites. Previous work from this laboratory has shown that uncoated latex beads are able to translocate along the ventral neural crest pathway after injection into young embryos; however, beads coated with fibronectin are restricted from the ventral route ( Bronner -Fraser, M.E., 1982, Dev. Biol., 91: 50-63). Here, we extend these observations to determine the effects of other macromolecules on bead distribution. The data show that laminin-coated beads, like fibronectin-coated beads, are restricted from the ventral pathway. In contrast, beads coated with type I collagen translocate ventrally after injection. Because macromolecules have characteristic charge properties, changes in surface charge caused by coating the beads may confound interpretation of the results. Electrostatic effects on bead movement were examined by coating the latex beads with polyamino acids in order to predictably alter the initial surface charge. The surface charge before injection was measured for beads coated with amino acid polymers or with various biologically important macromolecules; the subsequent translocation ability of these beads was then monitored in the embryo. Polylysine-coated beads (positively charged) were restricted from the ventral pathway as were fibronectin and laminin-coated beads, even though fibronectin and laminin beads were both negatively charged. In contrast, polytyrosine -coated beads ( neutrally charged) translocated ventrally as did negatively charged collagen-coated or uncoated beads. The results demonstrate that no correlation exists between the charge properties on the latex bead surface and their subsequent ability to translocate along the ventral pathway. Therefore, an adhesion mechanism independent of surface charge effects must explain the restriction or translocation of latex beads on a neural crest pathway.     

Microinjected carboxylated beads move predominantly poleward in sea urchin eggs

Observations on living mitotic cells have suggested that material in the spindle moves poleward during mitosis. In order to investigate this movement, sea urchin eggs have been microinjected with 0.25-micron diameter carboxylated fluorescent beads. When fluorescent beads were injected into unfertilized Lytechinus variegatus eggs, no motility was detected. When injected into mitotic cells, beads moved to the spindle poles. Individual beads moved rapidly, in a saltatory fashion, and followed generally linear paths. Beads appeared to move along astral fibers, were generally excluded from the spindle proper, and accumulated at the spindle poles. Some dispersion of the beads away from the pole was observed as cells completed mitosis, but the majority of beads retained a polar location. After depolymerization of spindle microtubules with nocodazole, some dispersion of beads into the cytoplasm was also observed. Beads moved along taxol-induced astral microtubules and accumulated at astral centers. These observations reveal that negatively charged beads accumulate rapidly at mitotic centers, moving toward the minus end of the microtubules. Neither the bidirectional motility of similar beads in interphase cells nor the plus-end-directed bead motility seen in axons was observed in these mitotic cells.     

Cell immobilization using PVA crosslinked with boric acid

A new cell immobilization technique is described in which polyvinyl alcohol is crosslinked with boric acid, with the addition of a small amount of calcium alginate. The presence of the calcium alginate improves the surface properties of the beads, preventing agglomeration. A pure culture of phenol-degrading Pseudomonas was immobilized in the PVA-alginate beads. Phenol was successfully degraded in a fluidized bed of the beads, indicating that cell viability was maintained following the immobilization procedure. The PVA-alginate beads proved to be very strong and durable, with no noticeable degradation of the beads after 2 weeks of continuous operation of the fluidized bed.     

Improvement of mechanical and biological properties of freeze-dried denitrifying alginate beads by using starch as a filler and carbon source

Freeze-dried, alginate-based beads, used for the immobilization of a denitrifying bacterium (Pseudomonas sp.), were filled with different concentrations (10%, 20%, 30% and 40%, w/w) of granular starch. The beads were incubated under denitrifying conditions in laboratory-scale, flow-through columns and monitored for changes in their physical and denitrifying properties. Freeze-dried beads containing high concentrations of starch were found to have better mechanical and denitrifying properties than beads containing low concentrations of this filler. Nitrate removal by the beads was found to be correlated with their starch content. Nitrite accumulation, as a result of incomplete denitrification, increased with the decrease in starch content of the beads. Nitrite in the outlet of the columns was measured in all types of beads during the initial phase of incubation but was undetectable, with the exception of beads with the lowest starch content, at later stages of incubation. Received: 9 November 1998 / Received revision: 3 February 1999 / Accepted: 5 February 1999     

Polymer support for exonucleolytic sequencing

Different kinds of particles were investigated for their potential use as supports for exonucleolytic sequence analysis. Composite beads composed of an unreactive polystyrene "core" and a "shell" of functionalized silica nanoparticles were found to best fulfill the various prerequisites. The biotin/streptavidin system was used for attachment of DNA to composite beads of 6 microm diameter. Applying M13 ssDNA in extremely high dilution (approximately 1 molecule versus 100 beads) with internal fluorescent labels, only a small fraction of beads was found to be associated with fluorescent entities, which likely correspond to a very small number of bound DNA molecules per particle. For better selection and transfer of DNA-containing beads into microstructures for exonuclease degradation the loading experiments were repeated with composite beads of 2.3 microm diameter. In this case a covalent bond was formed between carboxylate-functionalized beads and amino-terminated oligonucleotides, which were detected through external labelling with fluorescent nanoparticles interacting with biotinylated segments of the complementary strand.     

Collection of acrosome-reacted human sperm using monoclonal antibody-coated paramagnetic beads.

A monoclonal antibody (MAb) against human acrosome-reacted sperm was attached to paramagnetic polystyrene beads. Human sperm prepared by the swim-up method were 1) incubated in m-BWW, 2) incubated and ionophore treated, or 3) incubated with 5% seminal fluid. After treatment, sperm were mixed with the beads and incubated for 1 hr. Variously treated sperm showed different binding abilities to the beads. Sperm bound to the beads were collected by a magnet and subjected to triple staining. Most of the collected sperm were acrosome reacted. The results suggested that the beads can be used to estimate the acrosomal status of sperm, and that the use of antibody-coated paramagnetic beads provides a convenient way of collecting acrosome-reacted sperm. The acrosomal status detected by the beads was also compared with the ability of sperm to fuse with zona-free hamster eggs. It was found that greater bead-binding ability correlated with more sperm fusing with zona-free hamster eggs.     

Synexin binds in a calcium-dependent fashion to oriented chromaffin cell plasma membranes

Oriented plasma membrane fragments from chromaffin cells, isolated on polylysine-coated polyacrylamide beads, bind synexin in a calcium dependent manner. Synexin binding was also detected on beads coated with chromaffin granule membranes, but not to beads coated with erythrocyte membranes or to uncoated beads. Synexin binding to plasma membrane coated beads showed a specific requirement for calcium (K1 2 = 200 microM) and was insensitive to other divalent cations such as magnesium, strontium and barium. Synexin binding to either plasma membrane or granule membrane coated beads was saturable, was partially reversible by EGTA and was directly observed by SDS-polyacrylamide gel electrophoresis.     

Preparation and characterization of calcium pectinate gel beads entrapping catechin-loaded liposomes

Calcium pectinate gel (CPG) beads entrapping catechin-loaded liposomes were prepared with or without hydroxypropylmethylcellulose (HPMC) (denoted as CPG-LH and CPG-L beads, respectively) and characterized in comparison with the CPG beads prepared without liposome and HPMC (denoted as CPG-C beads). For all types of beads, the catechin entrapment efficiency decreased by about 40-50% as the concentration of CaCl2 in gelling media increased from 2 to 6%. At a constant CaCl2 level, the entrapment efficiency was higher in the order of CPG-LH, CPG-L, and CPG-C beads. The in vitro release test showed that in simulated intestinal fluid the rate of catechin release was higher in the order of CPG-C, CPG-L, and CPG-LH beads, indicating that the catechin release was slowed by liposome and further retarded when HPMC was used simultaneously, whereas not in simulated gastric fluid. The addition of cholesterol in liposome could not retard but accelerated the catechin release. The results suggest that the CPG beads reinforced with liposome and HPMC could be employed for a sustained oral delivery of catechins, although further improvements are necessary.     

Fibronectin-mediated binding and phagocytosis of polystyrene latex beads by baby hamster kidney cells

The binding and phagocytosis of fibronectin (pFN)-coated latex beads by baby hamster kidney (BHK) cells was studied as a function of fibronectin concentration and bead diameter. Cells were incubated with radioactive pFN-coated beads, and total bead binding (cell surface or ingested) was measured as total radioactivity associated with the cells. Of the bound beads, those that also were phagocytosed were distinguished by their insensitivity to release from the cells by trypsin treatment. In continuous incubations, binding of pFN-coated beads to cells occurred at 4 degrees C or 37 degrees C, but phagocytosis was observed only at 37 degrees C. In addition, degradation of 3H-pFN from ingested beads occurred at 37 degrees C, as shown by the release of trichloroacetic acid-soluble radioactivity into the incubation medium. When the fibronectin density on the beads was varied, binding at 4 degrees C and ingestion at 37 degrees C were found to have the same dose-response dependencies, which indicated that pFN densities that permitted bead binding were sufficient for phagocytosis to occur. The fibronectin density for maximal binding of ingestion was approximately 250 ng pFN/cm2. When various sized beads (0.085-1.091 micron), coated with similar densities of pFN, were incubated with cells at 4 degrees C, no variation in binding as a function of bead size was observed. Under these conditions, the absolute amount of pFN ranged from less than 100 molecules on the 0.085-micron beads to greater than 15,000 molecules on the 1.091-micron beads. Based upon these results it can be concluded that the critical parameter controlling fibronectin-mediated binding of latex beads by BHK cells is the spacing of the pFN molecules on the beads. Correspondingly, it can be suggested that the spacing between pFN receptors on the cell surface that is optimal for multivalent interactions to occur is approximately 18 nM. When phagocytosis of various sized beads was compared, it was found that the largest beads were phagocytosed slightly better (two fold) than the smallest beads. This occurred both in continuous incubations of cells with beads and when the beads were prebound to the cells. Finally, the kinetic constants for the binding of 0.085 microM pFN-coated beads to the cells were analyzed. There appeared to be approximately 62,000 binding sites and the KD was 4.03 X 10(-9) M. Assuming a bivalent interaction, it was calculated that BHK cells have approximately 120,000 pFN receptors/cell and the binding affinity between pFN and its receptor is approximately 6 X 10(-5) M.     

Selective binding of mouse and human spermatozoa to beads coated with extracellular matrix components

The ability of mouse epididymal and human ejaculated spermatozoa to bind to beads coated with various extracellular matrix components was examined. Mouse spermatozoa preferentially bound to beads coated with heparin (average values ranging between 6.2 and 8.8 sperm per bead were obtained in different experiments) and with chondroitinsulfate (6.2-7.0), and also, although with significant differences across replicate experiments, to beads coated with laminin (7.9-15.6 sperm per bead) and with collagen type I (6.1-18.5). Human spermatozoa bound to collagen-coated beads (15.4-22.6 sperm per bead) and, to a much lower extent, to chondroitin-sulfate-coated beads (3.2-4.7); they were also able to bind heparin-coated beads, although with ample differences between individual sperm donors (ranging between 0.8 and 18.7 sperm per bead). Very few human and mouse sperm bound fibronectin-coated beads; beads coated with albumin, hyaluronic acid, and chondronectin were always totally free of adhering sperm. The possible physiological role of the interactions between spermatozoa and extracellular matrix components are discussed.     

Cell surface action of thrombin is sufficient to initiate division of chick cells

Thrombin covalently linked to carboxylate-modified polystyrene beads initiated division of quiescent chick embryo (CE) cells either in medium containing low levels of serum or in serum-free medium. Release of thrombin was monitored by measuring acid-precipitable radioactivity released from 125I-thrombin beads into the medium during incubation with cells. Even if all of the acid-precipitable material released from the beads were active thrombin, it was not sufficient to account for any of the observed cell division, and was 10-30 fold less than the amount necessary to produce the increase in cell number caused by the thrombin beads. Two other kinds of experiments also showed that material released into the medium did not account for the observed initiation of cell division. First, medium taken from cultures incubated with thrombin beads did not initiate cell division when added to new quiescent cultures. Second, in coverslip experiments where populations of cells with an without thrombin feads shared the same medium, only bead-contacted cells divided. Several results suggested that the material which was released from the thrombin beads resulted from cell-associated proteolysis rather than from "leakage" of intact thrombin from the beads. For example, after incubating 125I-thrombin beads with or without CE cells, we were unable to detect any intact thrombin released into the medium. In addition, most of the material released from the beads was acid-soluble and was only released in the presence of CE cells. A few thrombin beads were endocytosed by CE cells, but they were surrounded by an intact plasma membrane. Thus they did not directly interact with the cytoplasm. The close association of many of the beads with the cell surface and the presence of a few beads in endocytic vesicles made it important to consider the possibility that thrombin might be released from the beads directly into the cells. This possibility was explored using ultrastructural (EM) autoradiography. With this technique (where one grain represented 700--900 thrombin molecules), we found that beads inside the cells had approximately the same number of grains as beads not in contact with cells. This suggested that little, if any, additional radioactive material had been released from the beads which were in contact with the cells. In addition, we were unable to detect any grains in the cytoplasm which could be attributed to released thrombin, even using an amount of 125I-thrombin beads which was 8 fold greater than the amount which produced maximal cell division. Taken together, these results provide direct evidence that thrombin action at the cell surface is sufficient to initiate division of CE cells.     

Sexual dichroism and pigment localization in the wing scales of Pieris rapae butterflies

The beads in the wing scales of pierid butterflies play a crucially important role in wing coloration as shown by spectrophotometry and scanning electron microscopy (SEM). The beads contain pterin pigments, which in Pieris rapae absorb predominantly in the ultraviolet (UV). SEM demonstrates that in the European subspecies Pieris rapae rapae, both males and females have dorsal wing scales with a high concentration of beads. In the Japanese subspecies Pieris rapae crucivora, however, only the males have dorsal wing scales studded with beads, and the dorsal scales of females lack beads. Microspectrophotometry of single scales without beads yields reflectance spectra that increase slightly and monotonically with wavelength. With beads, the reflectance is strongly reduced in the UV and enhanced at the longer wavelengths. By stacking several layers of beaded scales, pierid butterflies achieve strong colour contrasts, which are not realized in the dorsal wings of female P. r. crucivora. Consequently, P. r. crucivora exhibits a strong sexual dichroism that is absent in P. r. rapae.     

Congo red adsorption from aqueous solutions by using chitosan hydrogel beads impregnated with nonionic or anionic surfactant

The adsorption performance of CS beads impregnated with triton X-100 (TX-100) as a nonionic surfactant and sodium dodecyl sulfate (SDS) as an anionic surfactant was investigated for the removal of anionic dye (congo red) from aqueous solution. While the adsorption capacity of CS/TX-100 beads was enhanced at all concentrations of TX-100 (0.005–0.1%), the increase in the concentration of SDS above 0.01% in the CS/SDS beads gradually reduced the adsorption capacity of the beads. Equilibrium adsorption isotherm data indicated a good fit to the Sips isotherm model and a heterogeneous adsorption process. The Sips maximum adsorption capacity in dry weight of the CS/TX-100 beads was 378.79 mg/g and 318.47 mg/g for the CS/SDS beads, higher than the 223.25 mg/g of the CS beads. Modification of CS beads by impregnation with nonionic surfactant, or even anionic surfactant, at low concentrations is a possible way to enhance adsorption of anionic dye.     

In situ immobilized β-glucosidase fromAspergillus phoenicis QM 329

Summary Aspergillus phoenicis QM 329 was found to grow in the shape of beads in shake flasks and in an air-lift fermentor. Initial culture pH, pH profile during cultivation, carbon source, inoculum size and fermentor configuration influenced the retainment of the -glucosidase activty in the mycelium. Glucose and soluble starch produced beads with the highest activity and the best stability. Glucose-derived beads were more homogeneous in size and shape than the starch-derived beads. These beads kept their integrity for 10 d at 50° C. After 48 h hydrolysis of 50 g/l cellobiose 75% of the initial enzyme activity remained. The beads could be air-dried and alcohol-sterilized with only minor loss of activity. The size of the beads could be controlled by varying the size of the conidia inoculum. In an air-lift fermentor with a working volume of 1500 ml,900 ml beads with an average diameter of 2 mm (estimated to 37–45,000 beads) were produced in less than 3 d with glucose as carbon source. The beads held a -glucosidase activity of 0.140 IU/bead determined with the pNP assay.