Antibiotic-conjugated polyacrylate nanoparticles: new opportunities for development of anti-MRSA agents

This report describes the preparation of polyacrylate nanoparticles in which an N-thiolated beta-lactam antibiotic is covalently conjugated onto the polymer framework. These nanoparticles are formed in water by emulsion polymerization of an acrylated antibiotic pre-dissolved in a liquid acrylate monomer (or mixture of co-monomers) in the presence of sodium dodecyl sulfate as a surfactant and potassium persulfate as a radical initiator. Dynamic light scattering analysis and electron microscopy images of these emulsions show that the nanoparticles are approximately 40 nm in diameter. The emulsions have potent in vitro antibacterial properties against methicillin-resistant Staphylococcus aureus and have improved bioactivity relative to the non-polymerized form of the antibiotic. A unique feature of this methodology is the ability to incorporate water-insoluble drugs directly into the nanoparticle framework without the need for post-synthetic modification. Additionally, the antibiotic properties of the nanoparticles can be modulated by changing the length or location of the acrylate linker on the drug monomer.     

Glyconanobiotics: Novel carbohydrated nanoparticle antibiotics for MRSA and Bacillus anthracis

This report describes the synthesis and evaluation of glycosylated polyacrylate nanoparticles that have covalently-bound antibiotics within their framework. The requisite glycosylated drug monomers were prepared from one of three known antibiotics, an N-sec-butylthio beta-lactam, ciprofloxacin, and a penicillin, by acylation with 3-O-acryloyl-1,2-O-isopropylidene-5,6 bis((chlorosuccinyl)oxy)-d-glucofuranose (7) or 6-O-acetyl-3-O-acryloyl-1,2-O-isopropylidene-5-(chlorosuccinyl)oxy-alpha-d-glucofuranose (10). These acrylated monomers were subjected to emulsion polymerization in a 7:3 (w:w) mixture of butyl acrylate-styrene in the presence of sodium dodecyl sulfate as surfactant (3 weight %) and potassium persulfate as a radical initiator (1 weight %). The resulting nanoparticle emulsions were characterized by dynamic light scattering and found to have similar diameters ( approximately 40 nm) and size distributions to those of our previously studied systems. Microbiological testing showed that the N-sec-butylthio beta-lactam and ciprofloxacin nanoparticles both have powerful in vitro activities against methicillin-resistant Staphylococcus aureus and Bacillus anthracis, while the penicillin-bound nanoparticles have no antimicrobial activity. This indicates the need for matching a suitable antibiotic with the nanoparticle carrier. Overall, the study shows that even relatively large, polar acrylate monomers (MW>1000 amu) can be efficiently incorporated into the nanoparticle matrix by emulsion polymerization, providing opportunities for further advances in nanomedicine.     

A convenient method to prepare emulsified polyacrylate nanoparticles from powders [corrected] for drug delivery applications

We describe a method to obtain purified, polyacrylate nanoparticles in a homogeneous powdered form that can be readily reconstituted in aqueous media for in vivo applications. Polyacrylate-based nanoparticles can be easily prepared by emulsion polymerization using a 7:3 mixture of butyl acrylate and styrene in water containing sodium dodecyl sulfate as a surfactant and potassium persulfate as a water-soluble radical initiator. The resulting emulsions contain nanoparticles measuring 40-50 nm in diameter with uniform morphology, and can be purified by centrifugation and dialysis to remove larger coagulants as well as residual surfactant and monomers associated with toxicity. These purified emulsions can be lyophilized in the presence of maltose (a non-toxic cryoprotectant) to provide a homogeneous dried powder, which can be reconstituted as an emulsion by addition of an aqueous diluent. Dynamic light scattering and microbiological experiments were carried out on the reconstituted nanoparticles. This procedure allows for ready preparation of nanoparticle emulsions for drug delivery applications.     

Phospholipid-stabilized Au-nanoparticles

This communication outlines a simple two-step approach of modification of 1 nm diameter Au nanoparticles using an aqueous solution of (1,2-dipalmitoyl-sn-glycero-3-phosphothio-ethanol) phospholipid (PL). Transmission electron microscopy as well as particle size analysis show that, as a result of PL reactions with Au particles, the initial Au nanoparticle size increases to 5 nm. Considering the size of the PL and their ability to form liposomes, 5 nm diameter spheres indicate that the PL bilayer was attached to the surface of Au particles and the PL-Au interactions are facilitated by the presence of thiol functionality. The change of surface electronic properties of PL-stabilized Au particles is manifested by the disappearance of the 217 and 290 nm absorbances due to 5d-6sp transitions in Au, which is likely attributed to the presence of S-H functionalities which increase the free electron density of the particle. As a consequence, two surface plasmons resulting from a collective oscillation of electrons in response to UV excitation disappear.     

Investigation of Gold and Silver Nanoparticles on Absorption Heating and Scattering Imaging

Efficient conversion of absorbed light to heat energy and strong scattering by gold and silver nanoparticles suggest these nanoparticles as the agents of heating and imaging. Absorption efficiency and scattering efficiency of gold and silver nanoparticles were studied through numerical simulation using the discrete dipole approximation method. This study shows that the size of gold and silver nanoparticles can effect gold and silver nanoparticles’ absorption efficiency and scattering efficiency. The gold nanoparticle is found to possess the maximum absorption efficiency when the size of gold nanoparticle is 50 nm and the incident wavelength is 540 nm, and the increasing scattering efficiency with the increasing size of gold nanoparticle in the medium, and refractive index of the medium is around 1.33. However, the silver nanoparticle owns the maximum absorption efficiency when the size of silver nanoparticle is 20 nm and the incident wavelength is 396 nm, and the maximum scattering efficiency when the size of silver nanoparticle is 30 nm and the incident wavelength is 410 nm in the same medium. The conditions for achieving the maximum adsorption efficiency and scattering efficiency of gold and silver nanoparticle can be used for heating and imaging using visible and near-infrared light.     

Spatio-temporal modeling of nanoparticle delivery to multicellular tumor spheroids

The inefficiency of nanoparticle penetration in tissues limits the therapeutic efficacy of such formulations for cancer applications. Recent work has indicated that modulation of tissue architecture with enzymes such as collagenase significantly increases macromolecule delivery. In this study we developed a mathematical model of nanoparticle penetration into multicellular spheroids that accounts for radially dependent changes in tumor architecture, as represented by the volume fraction of tissue accessible to nanoparticle diffusion. Parameters such as nanoparticle binding, internalization rate constants, and accessible volume fraction were determined experimentally. Unknown parameters of nanoparticle binding sites per cell in the spheroid and pore shape factor were determined by fitting to experimental data. The model was correlated with experimental studies of the penetration of 40 nm nanoparticles in SiHa multicellular spheroids with and without collagenase treatment and was able to accurately predict concentration profiles of nanoparticles within spheroids. The model was also used to investigate the effects of nanoparticle size. This model contributes toward the understanding of the role of tumor architecture on nanoparticle delivery efficiency.     

Molecular Mechanisms of ZnO Nanoparticle Dispersion in Solution: Modeling of Surfactant Association,Electrostatic Shielding and Counter Ion Dynamics

Molecular models of 5 nm sized ZnO/Zn(OH)2 core-shell nanoparticles in ethanolic solution were derived as scale-up models (based on an earlier model created from ion-by-ion aggregation and self-organization) and subjected to mechanistic analyses of surface stabilization by block-copolymers. The latter comprise a poly-methacrylate chain accounting for strong surfactant association to the nanoparticle by hydrogen bonding and salt-bridges. While dangling poly-ethylene oxide chains provide only a limited degree of sterical hindering to nanoparticle agglomeration, the key mechanism of surface stabilization is electrostatic shielding arising from the acrylates and a halo of Na⁺ counter ions associated to the nanoparticle. Molecular dynamics simulations reveal different solvent shells and distance-dependent mobility of ions and solvent molecules. From this, we provide a molecular rationale of effective particle size, net charge and polarizability of the nanoparticles in solution.     

Effect of particle size on activation energy and peak temperature of the thermoluminescence glow curve of undoped ZnS nanoparticles

This paper reports the effect of particle size on the thermoluminescence (TL) of undoped ZnS nanoparticles. ZnS nanoparticles were prepared using a chemical precipitation method in which mercaptoethanol was used as the capping agent. The nanoparticles were characterized by X‐ray diffraction, field emission gun‐scanning electron microscopy and high‐resolution transmission electron microscopy. When the concentrations of mercaptoethanol used are 0, 0.005, 0.01, 0.015, 0.025, 0.040 and 0.060 M, the sizes of the nanoparticles are 2.86, 2.81, 2.69, 2.40, 2.10, 1.90 and 1.80 nm, respectively. Initially, the TL intensity of UV‐irradiated ZnS nanoparticles increases with temperature, attains a peak value I_m for a particular temperature T_m, and then decreases with further increases in temperature. The values of both I_m and T_m increase with decreasing nanoparticle size. Whereas the activation energy decreases slightly with decreasing nanoparticle size, the frequency factor decreases significantly as the nanoparticle size is reduced. The order of kinetics for the TL glow curve of ZnS nanoparticles is 2. Expressions are derived for the dependence of activation energy (E_a) and T_m on nanoparticle size, and good agreement is found between the experimental and theoretical results. Copyright © 2015 John Wiley & Sons, Ltd.     

Size and Temperature Effects on the Surface Plasmon Resonance in Silver Nanoparticles

The surface plasmon energy in spherical silver nanoparticles embedded in silica host matrix depends on the size and temperature of the nanoparticles. The dependences of the surface plasmon energy were studied for silver nanoparticles in the size range 11?C30?nm and in the temperature interval 293?C650?K. As the size of the nanoparticles decreases or the temperature increases, the surface plasmon resonance shifts to red. When the size of the nanoparticles decreases, the scattering rate of the conduction electrons increases, which results in the nonlinear red shift of the surface plasmon resonance. The red shift with temperature is linear for larger nanoparticles and becomes nonlinear for smaller ones. As the temperature of the nanoparticles increases, the volume thermal expansion of the nanoparticles leads to the red shift of the surface plasmon resonance. The thermal volume expansion coefficient depends on the size and temperature. It increases with a decrease of the nanoparticle size and an increase of the temperature.     

Growth and fragmentation of silver nanoparticles in their synthesis with a fs laser and CW light by photo-sensitization with benzophenone.

The photo-sensitization synthetic technique of making silver nanoparticles using benzophenone is studied using both a laser and a mercury lamp as light sources. The power and irradiation time dependence of the synthesized nanoparticle absorption spectra and their size distribution [as determined by transmission electron microscopy (TEM)] are studied in each method and compared. In the laser synthesis, as either the laser power or the irradiation time increases, the intensity of the surface plasmon resonance absorption at 400 nm is found to increase linearly first, followed by a reduction of the red edge of the plasmon resonance absorption band. The TEM results showed that in the laser synthesis low powers and short irradiation times produce nanoparticles around 20 nm in diameter. Increasing the power or irradiation time produces a second population of nanoparticles with average size of 5 nm in diameter. These small particles are believed to be formed from the surface ablation of the large particles. The surface plasmon absorption band is found to be narrower when the nanoparticles are produced with laser irradiation. Throughout the exposure time with the CW lamp, the plasmon resonance absorption band of the particles formed first grows in intensity, then blue shifts and narrows, and finally red shifts while decreasing in intensity. The TEM results for lamp samples showed particle formation and growth, followed by small nanoparticle formation. The above results are discussed in terms of a mechanism in which, the excited benzophenone forms the ketal radical, which reduces Ag+ in solution and on the Ag nanoparticle surface. As the time of irradiation or the light energy increases the benzophenone is consumed, which is found to be the limiting reagent. This stops the formation of the normal large nanoparticles while their photo-ablation continues to make the small particles.     

Antioxidant,Antimicrobial, and Neurotoxicity (in Sh-Sy5y Cell Lines) Properties of Mg Nanoparticle System (BP@MgNPs) Prepared by Green Synthesis with Bee Pollen

Due to their distinct characteristics and possible uses in a variety of disciplines, nanoparticles have attracted a lot of attention recently. One area of interest is the synthesis of nanoparticles using natural sources such as bee pollen. The research aims to evaluate the usability of bee pollen extract-based magnesium nanoparticles (MgNPs). First, a palynological study was used to determine the plant source of bee pollen. The nanoparticle was characterized using scanning electron microscopy, energy dispersive X-ray analysis, transmission electron microscopy, X-ray diffractometry, and Fourier transform infrared spectroscopy. The results revealed cubic-shaped MgNPs with an average size range of 36–40 nm. Afterward, nanoparticles were evaluated for their antioxidant, antimicrobial, and neurotoxic properties. It was determined that the total antioxidant capacity, phenolic (TPC), flavonoid (TFC) content, DPPH radical scavenging, and antimicrobial activity of the nanoparticles were lower than pollen extract. At the same time, nanoparticles have less toxicity than bee pollen.     

Modulating supramolecular assemblies and mechanical properties of engineered protein materials by fluorinated amino acids

Here we describe the biosynthesis and characterization of fluorinated protein block polymers comprised of the two self-assembling domains (SADs): elastin (E) and the coiled-coil region of cartilage oligomeric matrix proteins (C). Fluorination is achieved by residue-specific incorporation of p-fluorophenylalanine (pFF) to create pFF-EC, pFF-CE, and pFF-ECE. Global fluorination results in downstream effects on the temperature-dependent secondary structure, supramolecular assembly, and bulk mechanical properties. The impact of fluorination on material properties also differs depending on the orientation of the block configurations as well as the number of domains in the fusion. These studies suggest that integration of fluorinated amino acids within protein materials can be employed to tune the material properties, especially mechanical integrity.     

Effect of capping agent concentration on thermoluminescence and photoluminescence of copper‐doped zinc sulfide nanoparticles

Copper‐doped zinc sulfide (ZnS:Cu) nanoparticles with varying concentrations of capping agent were prepared using a chemical route technique. These particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy and X‐ray diffraction (XRD). Optical absorption studies showed that the absorption edge shifted towards the blue region as the concentration of the capping agent increased. Using effective mass approximation, calculation of the nanoparticle size indicated that effective band gap energy increases with decreasing particle size. The thermoluminescence (TL) properties of sodium hexameta phosphate (SHMP)‐passivated ZnS:Cu nanoparticles were investigated after UV irradiation at room temperature. The TL glow curve of capped ZnS:Cu showed variations in TL peak position and intensity with the change in capping agent concentration. The photoluminescence (PL) spectra of ZnS:Cu nanoparticles excited at 254 nm exhibited a broad green emission band peaking around 510 nm, which confirmed the characteristic feature of Zn²⁺ as well as Cu²⁺ ions as the luminescent centres in the lattice. The PL spectra of ZnS:Cu nanoparticles with increasing capping agent concentrations revealed that the emission becomes more intense and shifted towards shorter wavelengths as the sizes of the samples were reduced. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of polymer grafting density on silica nanoparticle toxicity

Nanoparticles are commonly engineered with a layer of polymers on the surface used to increase their stability and biocompatibility, as well as providing multifunctional properties. Formulating the nanoparticle size and surface properties with polymers directly affects the way these nanoparticles interact with a biological system. Many previous studies have emphasized the importance of nanoparticle size and surface charge in affecting their toxicity in cells. However, the potential weakness in many of these studies is that the polymer grafting densities on nanoparticles have been disregarded during toxicity evaluation. In the current study, we hypothesized that the density of polymers on nanoparticles will affect their toxicity to cells, especially for nanoparticle cores that are toxic themselves. To address this issue, we synthesized a range of RAFT (reversible addition fragmentation chain transfer) polymers bearing different surface charges and coated them onto silica nanoparticles (SiNPs) with different grafting densities. The in vitro cytotoxicity of these SiNPs was evaluated using the MTT (thiazolyl blue tetrazolium bromide) assay with Caco-2 cells. We found that neutral (biocompatible) polymers with a high grafting density on SiNPs were effective at protecting the cells from the toxicity of the silica core. High cellular toxicity was only observed for cationic polymer-SiNPs, while all other neutral and anionic polymer-SiNPs induced limited cellular toxicity. In contrast, the toxic effects induced by low density polymer-coated SiNPs were mostly attributed to the silica core, while the polymer coatings had a limited contribution. These findings are important indicators for the future evaluation of the toxicological profile of polymer-coated nanoparticles.     

Fluorous tolerance of the estrogen receptor alpha as probed by 11-polyfluoroalkylestradiol derivatives

The concern of this work was to try to delineate factors, inherent to fluorination, susceptible to influence estradiol binding to the estrogen receptor alpha (ERalpha). For this purpose, fluorinated chains were linked at 11beta position of the steroid (i.e., C(6)F(13), CH(2)CH(2)C(4)F(9), CH(2)CH(2)C(8)F(17)). Relative binding affinity (RBA) for ERalpha of these compounds and of other related fluorinated derivatives was compared to those of non-fluorinated analogs. Despite being relatively well accepted by the receptor, investigated compounds exhibited lower RBA values at 0 degrees C than their non-fluorinated counterparts. Nevertheless, heavily fluorinated chains were tolerated in so far as they are not too long (C-4) and insulated from the steroidal core by a two methylene spacer unit. Increase of the temperature of our binding assay (25 degrees C) failed to change the RBA values of two selected polyfluorohexyl derivatives while it drastically enhanced the value of the corresponding non-fluorinated analogs. Rigidity of the chain induced by fluorination as well as the oleophilic (fluorophobic) nature of the estradiol binding cavity of ERalpha is proposed to explain these properties.     

Hydrophobic silver nanoparticles trapped in lipid bilayers: Size distribution,bilayer phase behavior,and optical properties

Background  

Lipid-based dispersion of nanoparticles provides a biologically inspired route to designing therapeutic agents and a means of reducing nanoparticle toxicity. Little is currently known on how the presence of nanoparticles influences lipid vesicle stability and bilayer phase behavior. In this work, the formation of aqueous lipid/nanoparticle assemblies (LNAs) consisting of hydrophobic silver-decanethiol particles (5.7 ± 1.8 nm) embedded within 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) bilayers is demonstrated as a function of the DPPC/Ag nanoparticle (AgNP) ratio. The effect of nanoparticle loading on the size distribution, bilayer phase behavior, and bilayer fluidity is determined. Concomitantly, the effect of bilayer incorporation on the optical properties of the AgNPs is also examined.     

Devitrification and recrystallization of nanoparticle-containing glycerol and PEG-600 solutions

Nanoparticles in solution offer unique electrical, mechanical and thermal properties due to their physical presence and interaction with the state of dispersion. This work is aimed to study the effects of hydroxyapatite (HA) nanoparticles on the devitrification and recrystallization events of two important cryoprotective solutions used in cell and tissue preservation namely glycerol (60% w/w) and PEG-600 (50% w/w). HA nanoparticles (20, 40 or 60 nm) were incorporated into solutions at the content of 0.1% or 0.5% (w/w), and were studied by differential scanning calorimeter (DSC) and cryomicroscopy. The presence of nanoparticles does not change the glass transition temperatures and melting temperatures of quenched solutions, but significantly affects the behavior of devitrification and recrystallization upon warming. Cryomicroscopic investigation showed the complex interactions among solution type, nanoparticle size and nanoparticle content, which apparently influence ice crystal growth or recrystallization in the quenched dispersions. These findings have significant implications for biomaterial cryopreservation, cryosurgery, and food manufacturing. The complexity of ice crystal growth kinetics in nanoparticle-containing dispersions remains to be poorly understood at the moment.     

Molecular dynamics guided study of salt bridge length dependence in both fluorinated and non-fluorinated parallel dimeric coiled-coils

The alpha-helical coiled-coil is one of the most common oligomerization motifs found in both native and engineered proteins. To better understand the stability and dynamics of the coiled-coil motifs, including those modified by fluorination, several fluorinated and nonfluorinated parallel dimeric coiled-coil protein structures were designed and modeled. We also attempt to investigate how changing the length and geometry of the important stabilizing salt bridges influences the coiled-coil protein structure. Molecular dynamics (MD) and free energy simulations with AMBER used a particle mesh Ewald treatment of the electrostatics in explicit TIP3P solvent with balanced force field treatments. Preliminary studies with legacy force fields (ff94, ff96, and ff99) show a profound instability of the coiled-coil structures in short MD simulation. Significantly, better behavior is evident with the more balanced ff99SB and ff03 protein force fields. Overall, the results suggest that the coiled-coil structures can readily accommodate the larger acidic arginine or S-2,7-diaminoheptanedoic acid mutants in the salt bridge, whereas substitution of the smaller L-ornithine residue leads to rapid disruption of the coiled-coil structure on the MD simulation time scale. This structural distortion of the secondary structure allows both the formation of large hydration pockets proximal to the charged groups and within the hydrophobic core. Moreover, the increased structural fluctuations and movement lead to a decrease in the water occupancy lifetimes in the hydration pockets. In contrast, analysis of the hydration in the stable dimeric coiled-coils shows high occupancy water sites along the backbone residues with no water occupancy in the hydrophobic core, although transitory water interactions with the salt bridge residues are evident. The simulations of the fluorinated coiled-coils suggest that in some cases fluorination electrostatically stabilizes the intermolecular coiled-coil salt bridges. Structural analyses also reveal different side chain rotamer preferences for leucine when compared with 5,5,5,5',5',5'-hexafluoroleucine mutants. These observed differences in the side chain rotamer populations suggest differential changes in the side chain conformational entropy upon coiled-coil formation when the protein is fluorinated. The free energy of hydration of the isolated 5,5,5,5',5',5'-hexafluoroleucine amino acid is calculated to be 1.1 kcal/mol less stable than leucine; this hydrophobic penalty in the monomer may provide a driving force for coiled-coil dimer formation. Estimation of the ellipticity at 222 nm from a series of snapshots from the MD simulations with DicroCalc shows distinct increases in the ellipticity when the coiled-coil is fluorinated, which suggests that the helicity in the folded coiled-coils is greater when fluorinated.     

Increased nanoparticle penetration in collagenase-treated multicellular spheroids

The extracellular matrix of solid tumors presents a transport barrier that restricts nanoparticle penetration, thereby limiting the efficacy of nano-sized delivery vehicles for cancer imaging and therapy. In this study, the effect of nanoparticle size and collagenase treatment on penetration of carboxylated polystyrene nanoparticles was systematically assessed in a multicellular spheroid model. Penetration of the nanoparticles into the spheroid core was limited to particles smaller than 100 nm. Collagenase treatment of spheroids resulted in significantly increased penetration of nanoparticles up to 100 nm with only a minor increase in particle penetration observed for particles larger than 100 nm. Collagenase was immobilized onto the surface of nanoparticles for site-specific degradation of ECM proteins. Collagenase-coated, 100 nm nanoparticles demonstrated a 4-fold increase in the number of particles delivered to the spheroid core compared with control nanoparticles. Thus, nanoparticle delivery to solid tumors may be substantially improved by the incorporation of ECM-modulating enzymes in the delivery formulation.     

Minimal In Vitro Antimicrobial Efficacy and Ocular Cell Toxicity from Silver Nanoparticles

Silver in various forms has long been recognized for antimicrobial properties, both in biomedical devices and in eyes. However, soluble drugs used on the ocular surface are rapidly cleared through tear ducts and eventually ingested, resulting in decreased efficacy of the drug on its target tissue and potential concern for systemic side effects. Silver nanoparticles were studied as a source of anti-microbial silver for possible controlled-release contact lens controlled delivery formulations. Silver ion release over a period of several weeks from nanoparticle sources of various sizes and doses was evaluated in vitro against Pseudomonas aeruginosa strain PAO1. Mammalian cell viability and cytokine expression in response to silver nanoparticle exposure is evaluated using corneal epithelial cells and eye-associated macrophages cultured in vitro in serum-free media. Minimal microcidal and cell toxic effects were observed for several silver nanoparticle suspensions and aqueous extraction times for bulk total silver concentrations commensurate with comparative silver ion (e.g., ) toxicity. This indicates that (1) silver particles themselves in these size ranges (20–60 nm diameter) are not microcidal under conditions tested, and (2) insufficient silver ion is generated from these particles at these silver ion-equivalent loadings to produce observable biological effects compared to silver ions in these in vitro assays. This is consistent with confounding literature describing both efficacy and lack of microcidal effects for silver nanoparticles, depending on milieu, surface oxide properties, and size. If dosing allows substantially increased silver particle loading in the lens to produce sufficient pathogen-toxic silver ions and/or particle-microbe direct contact, the bactericidal efficacy of silver nanoparticles in vitro could possibly limit bacterial colonization problems associated with extended-wear contact lenses.