Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesterspoly-3-hydroxybutyrate (PHB) andpoly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) wasinvestigated with special regard to intermediateproducts, kinetics, and yields. During the degradationof PHBV acetate, propionate, n-butyrate, andn-valerate were detected. Additionally,3-hydroxybutyrate and 3-hydroxyvalerate and fourdimeric esters of these two molecules were identifiedby GC-MS measurements. Three different test systemsfor the anaerobic degradation of polyesters werestudied. It was not possible to get reproducibleresults by means of the Anaerobic Sturm-test, a simplesystem based on carbon dioxide measurement. Secondly,a system based on the GC measurement of accumulatedorganic acids was investigated. A degradation of 90%in two days was calculated by a carbon balance. Bestresults were reached with the third test system basedon the measurement of methane with a gas meter. Adegradation of 99% was observed within 30 days.     

Heterologous production of 3-hydroxyvalerate in engineered Escherichia coli

3-Hydroxyacids are a group of valuable fine chemicals with numerous applications, and 3-hydroxybutyrate (3-HB) represents the most common species with acetyl-CoA as a precursor. Due to the lack of propionyl-CoA in most, if not all, microorganisms, bio-based production of 3-hydroxyvalerate (3-HV), a longer-chain 3-hydroxyacid member with both acetyl-CoA and propionyl-CoA as two precursors, is often hindered by high costs associated with the supplementation of related carbon sources, such as propionate or valerate. Here, we report the derivation of engineered Escherichia coli strains for the production of 3-HV from unrelated cheap carbon sources, in particular glucose and glycerol. Activation of the sleeping beauty mutase (Sbm) pathway in E. coli enabled the intracellular formation of non-native propionyl-CoA. A selection of enzymes involved in 3-HV biosynthetic pathway from various microorganisms were explored for investigating their effects on 3-HV biosynthesis in E. coli. Glycerol outperformed glucose as the carbon source, and glycerol dissimilation for 3-HV biosynthesis was primarily mediated through the aerobic GlpK-GlpD route. To further enhance 3-HV production, we developed metabolic engineering strategies to redirect more dissimilated carbon flux from the tricarboxylic acid (TCA) cycle to the Sbm pathway, resulting in an enlarged intracellular pool of propionyl-CoA. Both the presence of succinate/succinyl-CoA and their interconversion step in the TCA cycle were identified to critically limit the carbon flux redirection into the Sbm pathway and, therefore, 3-HV biosynthesis. A selection of E. coli host TCA genes encoding enzymes near the succinate node were targeted for manipulation to evaluate the contribution of the three TCA routes (i.e. oxidative TCA cycle, reductive TCA branch, and glyoxylate shunt) to the redirected carbon flux into the Sbm pathway. Finally, the carbon flux redirection into the Sbm pathway was enhanced by simultaneously deregulating glyoxylate shunt and blocking the oxidative TCA cycle, significantly improving 3-HV biosynthesis. With the implementation of these biotechnological and bioprocessing strategies, our engineered E. coli strains can effectively produce 3-HV up to 3.71 g l⁻¹ with a yield of 24.1% based on the consumed glycerol in shake-flask cultures.     

Comparative oxo-biodegradation study of poly-3-hydroxybutyrate-co-3-hydroxyvalerate/polypropylene blend in controlled environments

The potential use of poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) copolymer as a biodegradable additive in polypropylene (PP) has been explored. The melt blending technique was used to produce the blend of PHBV/PP (PB10). The degradation studies of PB10 were done in the field as well as in controlled laboratory conditions. The structural changes were studied using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). SEM micrographs showed the formation of agglomerates, pits, grooves, and holes on the treated films as a result of microbial activity. FTIR spectra indicated clear evidences of oxo-biodegradation of polymer chains due to an increase in carbonyl peak index. Thermogravimetric analysis confirmed that the thermal stability of PB10 was increased after soil burial. This study contributed toward the prospective commercial applications of PHBV for use in the food packaging industry.     

Biosynthesis and native granule characteristics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in Delftia acidovorans

The ability of Delftia acidovorans to incorporate a broad range of 3-hydroxyvalerate (3HV) monomers into polyhydroxyalkanoate (PHA) copolymers was evaluated in this study. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] containing 0–90 mol% of 3HV was obtained when a mixture of sodium 3-hydroxybutyrate and sodium valerate was used as the carbon sources. Transmission electron microscopy analysis revealed an interesting aspect of the P(3HB-co-3HV) granules containing high molar ratios of 3HV whereby, the copolymer granules were generally larger than those of poly(3-hydroxybutyrate) [P(3HB)] granules, despite having almost the same cellular PHA contents. The large number of P(3HB-co-3HV) granules occupying almost the entire cell volume did not correspond to a higher amount of polymer by weight. This indicated that the granules of P(3HB-co-3HV) contain polymer chains that are loosely packed and therefore have lower density than P(3HB) granules. It was also interesting to note that a decrease in the length of the side chain from 3HV to 4-hydroxybutyrate (4HB) corresponded to an increase in the density of the respective PHA granules. The presence of longer side chain monomers (3HV) in the PHA structure seem to exhibit steric effects that prevent the polymer chains in the granules from being closely packed. The results reported here have important implications on the maximum ability of bacterial cells to accumulate PHA containing monomers with longer side chain length.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Burkholderia cepacia D1.

Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced by Burkholderia cepacia D1 at 30°C in nitrogen-free culture solutions containing n-butyric acid and/or n-valeric acid. When n-valeric acid was used as the sole carbon source, the 3HV fraction in copolyester increased from 36 to 90 mol% as the concentration of n-valeric acid in the culture solution increased from 1 to 20 g/l. The addition of n-butyric acid to the culture solution resulted in a decrease in the 3HV fraction in copolyester. The copolymers biosynthesized by this method were mixtures of random copolymers having a wide variety of composition of the 3HV component. The melting points of the fractionated copolymers show a concave curve with the minimum at the 3HV content of ≈40 mol%. The a-parameter of lattice indices of the P(3HB) crystal for the fractionated copolymers largely increased as the 3HV composition increased. Biodegradability of the copolymer increased with the lower content of 3HV composition and/or the lower crystallinity.     

n-Amyl alcohol as a substrate for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by bacteria

Abstract n -Amyl alcohol was examined as a source for the synthesis of the 3-hydroxyvalerate (3HV) unit of the biopolyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)), by Alcaligenes sp., Pseudomonas sp. and several methylotrophic bacteria. A. eutrophus and Ps. lemoignei synthesized P(3HB-co-3HV) from glucose and n -amyl alcohol under nitrogen-deficient conditions. Many of methylotrophic bacteria grown on methanol synthesized the copolyester from methanol and n -amyl alcohol under nitrogen-deficient conditions. The content and composition of the polyester varied from strain to strain. Paracoccus denitrificans differed from all others in having a higher content of 3-hydroxyvalerate units in the copolyester synthesized.     

Enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by fed-batch cultures of Pseudomonas sp EL-2

Pseudomonas sp EL-2 was cultivated to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] from a structurally unrelated carbon source, glucose, by a fed-batch culture technique. Variation of the carbon to nitrogen (C/N) ratio of the medium produced optimal P(3HB-co-3HV) production at a C/N ratio of 95. Production of P(3HB-co-3HV) was favored by a dissolved oxygen tension of 40%. A maximum biomass concentration of 38 g L⁻¹ containing 53% P(3HB-co-3HV) was achieved after 45 h of cultivation. This corresponds to a volumetric productivity of 0.84 g L⁻¹ h⁻¹. The copolymer contained 7.5 mol% 3-hydroxyvalerate. Journal of Industrial Microbiology & Biotechnology (2000) 24, 36–40. Received 28 January 1999/ Accepted in revised form 11 September 1999     

Biocompatibility of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters produced byAlcaligenes sp. MT-16

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), copolyesters, with 3-hydroxyvalerate (3HV) contents ranging from 17 to 60 mol%, were produced byAlcaligenes sp. MT-16, and their biocompatibility evaluated by the growth of Chinese hamster ovary (CHO) cells and the adsorption of blood proteins and platelets onto their film surfaces. The number of CHO cells that adhered to and grew on these films was higher with increasing 3HV content. In contrast, the tendency for blood proteins and platelets to adhere to the copolyester surfaces significantly decreased with increasing 3HV content. Examination of the surface morphology using atomic force microscopy revealed that the surface roughness was an important factor in determining the biocompatibility of theses copolyesters. The results obtained in this study suggest that poly(3HB-co-3HV) copolyesters, with >30 mol% 3HV, may be useful in biocompatible biomedical applications.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Burkholderia cepacia D1

Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced by Burkholderia cepacia D1 at 30°C in nitrogen-free culture solutions containing n-butyric acid and/or n-valeric acid. When n-valeric acid was used as the sole carbon source, the 3HV fraction in copolyester increased from 36 to 90 mol% as the concentration of n-valeric acid in the culture solution increased from 1 to 20 g/l. The addition of n-butyric acid to the culture solution resulted in a decrease in the 3HV fraction in copolyester. The copolymers biosynthesized by this method were mixtures of random copolymers having a wide variety of composition of the 3HV component. The melting points of the fractionated copolymers show a concave curve with the minimum at the 3HV content of ≈40 mol%. The a-parameter of lattice indices of the P(3HB) crystal for the fractionated copolymers largely increased as the 3HV composition increased. Biodegradability of the copolymer increased with the lower content of 3HV composition and/or the lower crystallinity.     

Rhodospirillum rubrum: utilization of condensed corn solubles for poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) production

Aims: This study sought to develop a less expensive medium for growth of the polyhydroxyalkanoate-producing bacterium Rhodospirillum rubrum from the ethanol production coproduct, condensed corn solubles (CCS). Methods and Results: Small-scale trials using R. rubrum were performed in aerated or anaerobic stoppered serum bottles filled with media. The CCS (240 g l⁻¹) achieved a maximum cell density and growth rate comparable with the defined supplemented malate-ammonium medium (mSMN) or tryptic soy broth. Microaerophilic solubles medium cultures exhibited significantly higher maximum cell densities and growth rates than did strictly anaerobic cultures; while illumination, nickel or biotin addition had no effect. Growth of R. rubrum in a pH controlled bioreactor was significantly better in CCS (240 g l⁻¹) than in mSMN medium and supported production of 0·36% (cell dry weight) poly-(3-hydroxybutyrate-Co-3-hydroxyvalerate) after 24 h. Conclusions: A CCS medium was devised that supported R. rubrum growth for biopolymer production as effective as the defined medium. Significance and Impact of the Study: This study demonstrates that a more economical medium can be developed for biopolymer production using a low value coproduct from ethanol production. The impact is that this inexpensive solubles medium may make it more economical to produce the biopolymer on a commercial scale.     

Metabolic engineering of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) composition in recombinant Salmonella enterica serovar typhimurium

A recombinant strain of Salmonella enterica serovar Typhimurium (mutant in propionate-activation activity) was metabolically engineered to control the composition of poly(3-hydroxybutyrate-co-3-hydroxy- valerate) (PHBV), a polyhydroxyalkanoate copolymer with commercially desirable properties. A gene (prpE) encoding propionyl-CoA synthetase was placed under the control of the IPTG-inducible taclacUV5 promoter (P(taclacUV5)) while the polyhydroxyalkanoate synthesis operon (phaBCA) from Acinetobacter sp. RA3849 was coexpressed under the control of the arabinose-inducible araBAD promoter (P(BAD)). S. enterica, harboring both constructs, was grown in medium containing a fixed substrate concentration and the composition of the copolymer was varied between 2 mol% and 25 mol% 3-hydroxyvalerate by controlling the IPTG level in the medium. This "dial-a-composition" system should find application in cases where the substrate concentration of a feedstream for PHBV bioplastic production is not adjustable.     

Application of acetyl-CoA acetyltransferase (AtoAD) in Escherichia coli to increase 3-hydroxyvalerate fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Polyhydroxyalkanoate (PHA) is a family of biodegradable polymers, and incorporation of different monomers can alter its physical properties. To produce the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) containing a high level of 3-hydroxyvalerate (3HV) by altering acetyl-CoA pool levels, we overexpressed an acetyl-CoA acetyltransferase (atoAD) in an engineered E. coli strain, YH090, carrying PHA synthetic genes bktB, phaB, and phaC. It was found that, with introduction of atoAD and with propionate as a co-substrate, 3HV fraction in PHA was increased up to 7.3-fold higher than a strain without atoAD expressed in trans (67.9 mol%). By the analysis of CoA pool concentrations in vivo and in vitro using HPLC and LC-MS, overexpression of AtoAD was shown to decrease the amount of acetyl-CoA and increase the propionyl-CoA/acetyl-CoA ratio, ultimately resulting in an increased 3HV fraction in PHA. Finally, synthesis of P(3HB-co-3HV) containing 57.9 mol% of 3HV was achieved by fed-batch fermentation of YJ101 with propionate.

     

Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9.

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.     

Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesters poly-3-hydroxybutyrate (PHB) and poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) was investigated with special regard to intermediate products, kinetics, and yields. During the degradation of PHBV acetate, propionate, n-butyrate, and n-valerate were detected. Additionally, 3-hydroxybutyrate and 3-hydroxyvalerate and four dimeric esters of these two molecules were identified by GC-MS measurements. Three different test systems for the anaerobic degradation of polyesters were studied. It was not possible to get reproducible results by means of the Anaerobic Sturm-test, a simple system based on carbon dioxide measurement. Secondly, a system based on the GC measurement of accumulated organic acids was investigated. A degradation of 90% in two days was calculated by a carbon balance. Best results were reached with the third test system based on the measurement of methane with a gas meter. A degradation of 99% was observed within 30 days.     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from glucose with elevated 3-hydroxyvalerate fraction via combined citramalate and threonine pathway in Escherichia coli

The biosynthesis of polyhydroxyalkanoate copolymers in Escherichia coli from unrelated carbon sources becomes attractive nowadays. We previously developed a poly(hydroxybutyrate-co-hydroxyvalerte) (PHBV) biosynthetic pathway from an unrelated carbon source via threonine metabolic route in E. coli (Chen et al., Appl Environ Microbiol 77:4886-4893, 2011). In our study, a citramalate pathway was introduced in recombinant E. coli by cloning a cimA gene from Leptospira interrogans. By blocking the pyruvate and the propionyl-CoA catabolism and replacing the β-ketothiolase gene, the PHBV with 11.5 mol% 3HV fraction was synthesized. Further, the combination of citramalate pathway with the threonine biosynthesis pathway improved the 3HV fraction in PHBV copolymer to 25.4 mol% in recombinant E. coli.     

Crystallization behavior and hydrophobic properties of biodegradable ethyl cellulose-g-poly(3-hydroxybutyrate-co-3-hydroxyvalerate): The influence of the side-chain length and grafting density

The copolymerization of grafting poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) onto ethyl cellulose (EC) was carried out through the homogeneous acylation reaction between EC as a backbone and telechelic OH-terminated PHBV oligomer as side chains in 1,2-dichloroethane by using 1,6-hexamethylene diisocyanate (HDI) as a coupling agent and dibutyltin dilaurate as catalyst. The resulting copolymers were studied by using NMR, FT-IR, WAXD, DSC, and contact angle measurements. It is found that with the increasing of the HDI/PHBV fraction, a transition exhibition occurred on crystallization behavior and hydrophobic properties, which could be modulated through controlling the lengths and grafting densities of PHBV side chains. Compared with those of neat PHBV, the degree of crystallinity for EC-g-PHBV_1.8 decreased from 58.1% to 39.1%, the maximum decomposition temperature increased from 259.6 to 266.3 °C, and the contact angle increased from 60.1° to 95.7°.     

Production of poly-D(-)-3-hydroxybutyrate and poly-D(-)-3-hydroxyvalerate by strains ofAlcaligenes latus

Alcaligenes latus strains can accumulate poly-D(-)-3-hydroxybutyrate (PHB) up to about 85% of cell dry weight. The abilities to store poly-D(-)-3-hydroxyvalerate (PHV) of three strains ofA. latus were investigated. With Na-propionate as PHV precursor, strainA. latusDSM 1122 had better PHV accumulation ability than strainsA. latusDSM 1123 and 1124. StrainA. latus DSM 1123 could store PHV when Na-valerate but not Na-propionate served as the PHV precursor. PHB and PHV accumulation byA. latus DSM 1124 rapidly increased when propionic acid and acetic acid were together added to the fermentor. This increase was not obtained in the culture shaker flask and fermentor growing the same strain when Na-propionate alone served as a PHV precursor.     

Synthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from activated sludge

Poly-3-hydroxybutyrate (PHB) and poly(3-hydroxybutyrate- co-3-hydroxyvalerate) (PHBV) was produced using a co-culture of activated sludge. When butyric acid was used as sole carbon source, PHB was produced. When valeric acid was added to the medium, PHBV was produced. The 3-hydroxyvalerate (3HV) mole fraction in the PHBV reached a maximum of 54% when valeric acid was used as sole carbon source. When the 3HV units in the co-polymer increased from 0.0 to 54.0 mol%, the melting temperature ( T m ) decreased from 178 to 99°C. The composition, and hence the mechanical properties, of the co-polymer produced by activated sludge can be controlled by adjusting the medium composition.     

Piezoelectric properties of poly-β-hydroxybutyrate and copolymers of β-hydroxybutyrate and β-hydroxyvalerate

The shear piezoelectricity was observed in oriented films of poly-β-hydroxybutyrate (PHB) and copolymers of β-hydroxybutyrate (HB) and β-hydroxyvalerate (HV). The piezoelectric stress constant 3₁₄ = e′₁₄ − ie″₁₄ (polarization/strain), the piezoelectric strain constant d₁₄ = d′₁₄ − id″₁₄ (polarization/stress), the elastic constant c = c′ + ic″ and the dielectric constant = ′ − i″ were determined at a frequency of 10 Hz over a temperature range from −150° to +150°C. Piezoelectric relaxations as well as elastic and dielectric relaxations were clearly observed at the glass transition temperature of about 15°C. In order to evaluate the piezoelectric constants (e₂ and d₂) for the piezoelectric phase which consists of the crystalline region and the oriented non-crystalline region, a spherical dispersion two phase model was utilized. Assuming the appropriate fixed values for the elastic and dielectric constants in the piezoelectric phase, d₂ and d₂ were calculated as a function of temperature. For a PHB and a copolymer (17 HV/83 HB), e₂ and d₂ showed relaxations, leading to a conclusion that the instantaneous piezoelectric constant in the crystalline phase is constant independent of temperature but the piezoelectric constant in the oriented non-crystalline phase is relaxational and has the opposite sign. For a copolymer (25 HV/75 HB) and a chloroform treated copolymer (17 HV/83 HB), e₂ and d₂ were constant independent of temperature, indicating that the oriented non-crystalline phase has disappeared owing to the increased molecular flexibility due to copolymerization or annealing in chloroform vapour.     

Poly(3-hydroxyvalerate) depolymerase of Pseudomonas lemoignei

Pseudomonas lemoignei is equipped with at least five polyhydroxyalkanoate (PHA) depolymerase structural genes (phaZ1 to phaZ5) which enable the bacterium to utilize extracellular poly(3-hydroxybutyrate) (PHB), poly(3-hydroxyvalerate) (PHV), and related polyesters consisting of short-chain-length hxdroxyalkanoates (PHA(SCL)) as the sole sources of carbon and energy. Four genes (phaZ1, phaZ2, phaZ3, and phaZ5) encode PHB depolymerases C, B, D, and A, respectively. It was speculated that the remaining gene, phaZ4, encodes the PHV depolymerase (D. Jendrossek, A. Frisse, A. Behrends, M. Andermann, H. D. Kratzin, T. Stanislawski, and H. G. Schlegel, J. Bacteriol. 177:596-607, 1995). However, in this study, we show that phaZ4 codes for another PHB depolymeraes (i) by disagreement of 5 out of 41 amino acids that had been determined by Edman degradation of the PHV depolymerase and of four endoproteinase GluC-generated internal peptides with the DNA-deduced sequence of phaZ4, (ii) by the lack of immunological reaction of purified recombinant PhaZ4 with PHV depolymerase-specific antibodies, and (iii) by the low activity of the PhaZ4 depolymerase with PHV as a substrate. The true PHV depolymerase-encoding structural gene, phaZ6, was identified by screening a genomic library of P. lemoignei in Escherichia coli for clearing zone formation on PHV agar. The DNA sequence of phaZ6 contained all 41 amino acids of the GluC-generated peptide fragments of the PHV depolymerase. PhaZ6 was expressed and purified from recombinant E. coli and showed immunological identity to the wild-type PHV depolymerase and had high specific activities with PHB and PHV as substrates. To our knowledge, this is the first report on a PHA(SCL) depolymerase gene that is expressed during growth on PHV or odd-numbered carbon sources and that encodes a protein with high PHV depolymerase activity. Amino acid analysis revealed that PhaZ6 (relative molecular mass [M(r)], 43,610 Da) resembles precursors of other extracellular PHA(SCL) depolymerases (28 to 50% identical amino acids). The mature protein (M(r), 41,048) is composed of (i) a large catalytic domain including a catalytic triad of S(136), D(211), and H(269) similar to serine hydrolases; (ii) a linker region highly enriched in threonine residues and other amino acids with hydroxylated or small side chains (Thr-rich region); and (iii) a C-terminal domain similar in sequence to the substrate-binding domain of PHA(SCL) depolymerases. Differences in the codon usage of phaZ6 for some codons from the average codon usage of P. lemoignei indicated that phaZ6 might be derived from other organisms by gene transfer. Multialignment of separate domains of bacterial PHA(SCL) depolymerases suggested that not only complete depolymerase genes but also individual domains might have been exchanged between bacteria during evolution of PHA(SCL) depolymerases.