A spectrophotometric assay for strictosidine synthase

A spectrophotometric assay for strictosidine synthase is described. Strictosidine is extracted with ethyl acetate and, where high substrate concentrations are used, the organic extract is washed with dilute ammonia to remove coextracted secologanin; after evaporation of the solvent, the residue is heated with 5 M H2SO4 for 45 min and the A348 value is measured. Strictosidine production is calculated from the response of similarly treated standards. A minimum production of 10-25 nmol of strictosidine may be determined. The assay is demonstrated using extracts of cultured Cinchona ledgeriana cells.     

Active site mutations of recombinant deacetoxycephalosporin C synthase

Site-directed mutagenesis of active site residues of deacetoxycephalosporin C synthase active site residues was carried out to investigate their role in catalysis. The following mutations were made and their effects on the conversion of 2-oxoglutarate and the oxidation of penicillin N or G were assessed: M180F, G299N, G300N, Y302S, Y302F/G300A, Y302E, Y302H, and N304A. The Y302S, Y302E, and Y302H mutations reduced 2-oxoglutarate conversions and abolished (<2%) penicillin G oxidation. The Y302F/G300A mutation caused partial uncoupling of penicillin G oxidation from 2-oxoglutarate conversion, but did not uncouple penicillin N oxidation from 2-oxoglutarate conversion. Met-180 is involved in binding 2-oxoglutarate, and the M180F mutation caused uncoupling of 2-oxoglutarate from penicillin oxidation. The N304A mutation apparently enhanced in vitro conversion of penicillin N but had little effect on the oxidation of penicillin G, under standard assay conditions.     

Studies on the active site of deacetoxycephalosporin C synthase

The Fe(II) and 2-oxoglutarate-dependent dioxygenase deacetoxycephalosporin C synthase (DAOCS) from Streptomyces clavuligerus was expressed at ca 25 % of total soluble protein in Escherichia coli and purified by an efficient large-scale procedure. Purified protein catalysed the conversions of penicillins N and G to deacetoxycephems. Gel filtration and light scattering studies showed that in solution monomeric apo-DAOCS is in equilibrium with a trimeric form from which it crystallizes. DAOCS was crystallized +/-Fe(II) and/or 2-oxoglutarate using the hanging drop method. Crystals diffracted to beyond 1.3 A resolution and belonged to the R3 space group (unit cell dimensions: a=b=106.4 A, c=71.2 A; alpha=beta=90 degrees, gamma=120 degrees (in the hexagonal setting)). Despite the structure revealing that Met180 is located close to the reactive oxidizing centre of DAOCS, there was no functional difference between the wild-type and selenomethionine derivatives. X-ray absorption spectroscopic studies in solution generally supported the iron co-ordination chemistry defined by the crystal structures. The Fe K-edge positions of 7121.2 and 7121.4 eV for DAOCS alone and with 2-oxoglutarate were both consistent with the presence of Fe(II). For Fe(II) in DAOCS the best fit to the Extended X-ray Absorption Fine Structure (EXAFS) associated with the Fe K-edge was found with two His imidazolate groups at 1.96 A, three nitrogen or oxygen atoms at 2.11 A and one other light atom at 2.04 A. For the Fe(II) in the DAOCS-2-oxoglutarate complex the EXAFS spectrum was successfully interpreted by backscattering from two His residues (Fe-N at 1.99 A), a bidentate O,O-co-ordinated 2-oxoglutarate with Fe-O distances of 2.08 A, another O atom at 2.08 A and one at 2.03 A. Analysis of the X-ray crystal structural data suggests a binding mode for the penicillin N substrate and possible roles for the C terminus in stabilising the enzyme and ordering the reaction mechanism.     

Engineering deacetoxycephalosporin C synthase as a catalyst for the bioconversion of penicillins

Journal of Industrial Microbiology & Biotechnology - 7-aminodeacetoxycephalosporanic acid (7-ADCA) is a key intermediate of many clinically useful semisynthetic cephalosporins that were...     

Controlling the substrate selectivity of deacetoxycephalosporin/deacetylcephalosporin C synthase

Deacetoxycephalosporin/deacetylcephalosporin C synthase (DAOC/DACS) is an iron(II) and 2-oxoglutarate-dependent oxygenase involved in the biosynthesis of cephalosporin C in Cephalosporium acremonium. It catalyzes two oxidative reactions, oxidative ring-expansion of penicillin N to deacetoxycephalosporin C, and hydroxylation of the latter to give deacetylcephalosporin C. The enzyme is closely related to deacetoxycephalosporin C synthase (DAOCS) and DACS from Streptomyces clavuligerus, which selectively catalyze ring-expansion or hydroxylation reactions, respectively. In this study, structural models based on DAOCS coupled with site-directed mutagenesis were used to identify residues within DAOC/DACS that are responsible for controlling substrate and reaction selectivity. The M306I mutation abolished hydroxylation of deacetylcephalosporin C, whereas the W82A mutant reduced ring-expansion of penicillin G (an "unnatural" substrate). Truncation of the C terminus of DAOC/DACS to residue 310 (Delta310 mutant) enhanced ring-expansion of penicillin G by approximately 2-fold. A double mutant, Delta310/M306I, selectively catalyzed the ring-expansion reaction and had similar kinetic parameters to the wild-type DAOC/DACS. The Delta310/N305L/M306I triple mutant selectively catalyzed ring-expansion of penicillin G and had improved kinetic parameters (K(m) = 2.00 +/- 0.47 compared with 6.02 +/- 0.97 mm for the wild-type enzyme). This work demonstrates that a single amino acid residue side chain within the DAOC/DACS active site can control whether the enzyme catalyzes ring-expansion, hydroxylation, or both reactions. The catalytic efficiency of mutant enzymes can be improved by combining active site mutations with other modifications including C-terminal truncation and modification of Asn-305.     

Purification and initial characterization of deacetoxycephalosporin C synthase from Streptomyces clavuligerus

Deacetoxycephalosporin C synthase, the penicillin N ring expansion enzyme from Streptomyces clavuligerus, was purified to near homogeneity, as judged by sodium dodecyl sulphate - polyacrylamide gel electrophoresis. The synthase was monofunctional and could be completely separated from deacetoxycephalosporin C hydroxylase activity early in the purification sequence. Synthase specific activity was increased 97-fold over crude cell-free extracts, and the purified enzyme appeared to be a monomer with a molecular weight of 36,000 and a Km for the penicillin N substrate of 50 microM. Deacetoxycephalosporin C synthase activity required alpha-ketoglutarate, Fe2+, and oxygen and was specifically stimulated by ascorbate and dithiothreitol. The enzyme was sensitive to thiol-specific inhibitors, the most effective of which was N-ethylmaleimide.     

A continuous spectrophotometric assay for determination of the aureusidin synthase activity of tyrosinase

Introduction – Aurones (aureusidin glycosides) are plant flavonoids that provide yellow colour to the flowers of some ornamental plants. In this study we analyse the capacity of tyrosinase to catalyse the synthesis of aureusidin by tyrosinase from the chalcone THC (2′,4′,6′,4–tetrahydroxychalcone). Objective – To develop a simple continuous spectrophotometric assay for the analysis of the spectrophotometric and kinetic characteristics of THC oxidation by tyrosinase. Methodology – THC oxidation was routinely assayed by measuring the increase in absorbance at 415 nm vs. reaction time. Results – According to the mechanism proposed for tyrosinase, the enzymatic reaction involves the o‐hydroxylation of the monophenol THC to the o‐diphenol (PHC, 2′,4′,6′,3,4 – pentahydroxychalcone), which is then oxidised to the corresponding o‐quinone in a second enzymatic step. This product is highly unstable and thus undergoes a series of fast chemical reactions to produce aureusidin. In these experimental conditions, the optimum pH for THC oxidation is 4.5. The progress curves obtained for THC oxidation showed the appearance of a lag period. The following kinetic parameters were also determined: K_m = 0.12 mM, V_m = 13 μM/min, V_m/K_m = 0.11/min. Conclusion – This method has made it possible to analyse the spectrophotometric and kinetic characteristics of THC by tyrosinase. This procedure has the advantages of a short analysis time, straightforward measurement techniques and reproducibility. In addition, it also allows the study of tyrosinase inhibitors, such as tropolone. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetic and crystallographic studies on deacetoxycephalosporin C synthase (DAOCS)

Deacetoxycephalosporin C synthase (DAOCS) is an iron(II) and 2-oxoglutarate-dependent oxygenase that catalyzes the conversion of penicillin N to deacetoxycephalosporin C, the committed step in the biosynthesis of cephalosporin antibiotics. The crystal structure of DAOCS revealed that the C terminus of one molecule is inserted into the active site of its neighbor in a cyclical fashion within a trimeric unit. This arrangement has hindered the generation of crystalline enzyme-substrate complexes. Therefore, we constructed a series of DAOCS mutants with modified C termini. Oxidation of 2-oxoglutarate was significantly uncoupled from oxidation of the penicillin substrate in certain truncated mutants. The extent of uncoupling varied with the number of residues deleted and the penicillin substrate used. Crystal structures were determined for the DeltaR306 mutant complexed with iron(II) and 2-oxoglutarate (to 2.10 A) and the DeltaR306A mutant complexed with iron(II), succinate and unhydrated carbon dioxide (to 1.96 A). The latter may mimic a product complex, and supports proposals for a metal-bound CO(2) intermediate during catalysis.     

Directed evolution of Streptomyces clavuligerus deacetoxycephalosporin C synthase for enhancement of penicillin G expansion

The deacetoxycephalosporin C synthase from Streptomyces clavuligerus was directly modified for enhancement of penicillin G expansion into phenylacetyl-7-aminodeacetoxycephalosporanic acid, an important intermediate in the industrial manufacture of cephalosporin antibiotics. Nine new mutants, mutants M73T, T91A, A106T, C155Y, Y184H, M188V, M188I, H244Q, and L277Q with 1.4- to 5.7-fold increases in the kcat/Km ratio, were obtained by screening 6,364 clones after error-prone PCR-based random mutagenesis. Subsequently, DNA shuffling was carried out to screen possible combinations of substitutions, including previous point mutations. One quaternary mutant, the C155Y/Y184H/V275I/C281Y mutant, which had a kcat/Km ratio that was 41-fold higher was found after 10,572 clones were assayed. The distinct mutants obtained using different mutagenesis methods demonstrated the complementarity of the techniques. Interestingly, most of the mutated residues that result in enhanced activities are located within or near the unique small barrel subdomain, suggesting that manipulation of this subdomain may be a constructive strategy for improvement of penicillin expansion. Several mutations had very distinct effects on expansion of penicillins N and G, perhaps due to different penicillin-interacting modes within the enzyme. Thus, the present study provided not only promising enzymes for cephalosporin biosynthesis but also a large number of mutants, which provided new insights into the structure-function relationship of the protein that should lead to further rational engineering.     

Engineering Streptomyces clavuligerus deacetoxycephalosporin C synthase for optimal ring expansion activity toward penicillin G

The deacetoxycephalosporin C synthase (DAOCS) from Streptomyces clavuligerus was engineered with the aim of enhancing the conversion of penicillin G into phenylacetyl-7-aminodeacetoxycephalosporanic acid, a precursor of 7-aminodeacetoxycephalosporanic acid, for industrial application. A single round of random mutagenesis followed by the screening of 5,500 clones identified three mutants, G79E, V275I, and C281Y, that showed a two- to sixfold increase in the k(cat)/K(m) ratio compared to the wild-type enzyme. Site-directed mutagenesis to modify residues surrounding the substrate resulted in three mutants, N304K, I305L, and I305M, with 6- to 14-fold-increased k(cat)/K(m) values. When mutants containing all possible combinations of these six sites were generated to optimize the ring expansion activity for penicillin G, the double mutant, YS67 (V275I, I305M), showed a significant 32-fold increase in the k(cat)/K(m) ratio and a 5-fold increase in relative activity for penicillin G, while the triple mutant, YS81 (V275I, C281Y, I305M), showed an even greater 13-fold increase in relative activity toward penicillin G. Our results demonstrate that this is a robust approach to the modification of DAOCS for an optimized DAOCS-penicillin G reaction.     

A simple and cost-effective spectrophotometric assay for cephalosporin C usingAlcaligenes faecalis

Summary A spectrophotometric assay for cephalosporin C was established usingAlcaligenes faecalis as a test organism. The optimal pH range for the sensitivity of the assay was pH 6.7–7.4. The dose-response curve became linear after 4 h incubation with 15% (v/v) dosage. Deviations between spectrophotometric and chemical assays were within 6%. The cost of the spectrophotometric assay is about one-hundredth that of the chemical assay.     

A spectrophotometric assay for feruloyl esterases

We have developed a spectrophotometric assay for the quantitative determination of feruloyl esterase activity based on release of 4-nitrophenol from a novel substrate, 4-nitrophenyl ferulate in an emulsion of Triton X-100 in aqueous buffer solution. The release of 4-nitrophenol was linear with reaction time at an early stage of the reaction with various esterase preparations. The method proposed here is accurate, rapid, and easy to perform.     

A continuous spectrophotometric assay for catechol-O-methyltransferase

Catechol-O-methyl transferase (COMT) activity can be monitored continuously using a coupled enzyme assay in which the inhibitory product S-adenosylhomocysteine (SAH) is converted to S-inosylhomocysteine (SIH). A simple spectrophotometric assay for COMT is described based on the difference in the ultraviolet absorption spectra between SAH and SIH.     

A spectrophotometric method for calmodulin assay

The activity of calmodulin as an activator of cAMP phosphodiesterase was assayed. AMP was hydrolyzed by 5'-nucleotidase, and the adenosine formed was measured by both liquid scintillation counting and spectrophotometry at 265 nm. Calmodulin activities measured by the two methods were equivalent, indicating that spectrophotometric assay of calmodulin can be used in place of the isotopic method.     

A spectrophotometric assay for hypoxanthine-guanine phosphoribosyltransferase

The present paper describes a new spectrophotometric assay for HGPRTase activity which is more rapid than and as sensitive as the isotopic assays for this enzyme and which avoids the use of high-voltage electrophoresis and liquid scintillation counting.     

A spectrophotometric assay for dehydroascorbate reductase

A simple spectrophotometric assay for dehydroascorbate reductase based on the change in absorbance associated with the formation of ascorbic acid is described. Using a partially purified preparation from spinach leaves, the reaction was found to be linear with time and enzyme concentration. The reaction rate determined by this assay correlated well with that obtained by a high-performance liquid chromatography method. Possible advantages over currently available assays as well as potential applications are discussed.     

A rapid spectrophotometric assay for catechol-O-methyltransferase

A new assay technique for catechol-O-methyltransferase is described. 3,4-Dihydroxyacetophenone is used as the substrate for the assay and the products, 3-hydroxy-4-methoxyacetophenone and 4-hydroxy-3-methoxyacetophenone are detected spectrophotometrically at 344 nm in borate buffer, pH 10.0. This spectrophotometric procedure is simple, rapid, and inexpensive while retaining reasonably high sensitivity and precision.     

A visible wavelength spectrophotometric assay suitable for high-throughput screening of 3-hydroxy-3-methylglutaryl-CoA synthase

3-Hydroxy-3-methylglutaryl-CoA (HMG-CoA) synthase catalyzes the first physiologically irreversible step in biosynthesis of isoprenoids and sterols from acetyl-CoA. Inhibition of enzyme activity by β-lactone-containing natural products correlates with substantial diminution of sterol synthesis, identifying HMG-CoA synthase as a potential drug target and suggesting that identification of effective inhibitors would be valuable. A visible wavelength spectrophotometric assay for HMG-CoA synthase has been developed. The assay uses dithiobisnitrobenzoic acid (DTNB) to detect coenzyme A (CoASH) release on acetylation of enzyme by the substrate acetyl-CoA, which precedes condensation with acetoacetyl-CoA to form the HMG-CoA product. The assay method takes advantage of the stability of recombinant enzyme in the absence of a reducing agent. It can be scaled down to a 60 μl volume to allow the use of 384-well microplates, facilitating high-throughput screening of compound libraries. Enzyme activity measured in the microplate assay is comparable to values measured by using conventional scale spectrophotometric assays with the DTNB method (412 nm) for CoASH production or by monitoring the use of a second substrate, acetoacetyl-CoA (300 nm). The high-throughput assay method has been successfully used to screen a library of more than 100,000 drug-like compounds and has identified both reversible and irreversible inhibitors of the human enzyme.