Xylanase production by Burkholderia sp. DMAX strain under solid state fermentation using distillery spent wash

Xylanase production by a newly isolated strain of Burkholderia sp. was studied under solid state fermentation using anaerobically treated distillery spent wash. Response surface methodology (RSM) involving Box-Behnken design was employed for optimizing xylanase production. The interactions between distillery effluent concentration, initial pH, moisture ratio and inoculum size were investigated and modeled. Under optimized conditions, xylanase production was found to be in the range of 5200-5600 U/g. The partially purified enzyme recovered after ammonium sulphate fractionation showed maximum activity at 50 degrees C and pH 8.6. Kinetic parameters like Km and Vmax for xylan were found to be 12.75 mg/ml and 165 micromol/mg/min. In the presence of metal ions such as Ca2+, Co2+, Mn2+, Ba2+, Mg2+ and protein disulphide reducing agents such as beta-mercaptoethanol and dithiotheritol (DTT) the activity of enzyme increased, where as strong inhibition of enzyme activity was observed in the presence of Cu2+, Ag+, Fe2+ and SDS. The crude enzyme hydrolysed lignocellulosic substrate, wheat bran as well as industrial pulp.     

Process parameters study of α-amylase production in a packed-bed bioreactor under solid-state fermentation with possibility of temperature monitoring

Production of α-amylase in a laboratory-scale packed-bed bioreactor by Bacillus sp. KR-8104 under solid-state fermentation (SSF) with possibility of temperature control and monitoring was studied using wheat bran (WB) as a solid substrate. The simultaneous effects of aeration rate, initial substrate moisture, and incubation temperature on α-amylase production were evaluated using response surface methodology (RSM) based on a Box-Behnken design. The optimum conditions for attaining the maximum production of α-amylase were 37°C, 72% (w/w) initial substrate moisture, and 0.15 L/min aeration. The average enzyme activity obtained under the optimized conditions was 473.8 U/g dry fermented substrate. In addition, it was observed that the production of enzyme decreased from the bottom of the bioreactor to the top.     

Production and optimization of thermophilic alkaline protease in solid-state fermentation by <Emphasis Type="Italic">Streptomyces</Emphasis> sp. CN902

The purpose of the present research is to study the production of thermophilic alkaline protease by a local isolate, Streptomyces sp. CN902, under solid state fermentation (SSF). Optimum SSF parameters for enzyme production have been determined. Various locally available agro-industrial residues have been screened individually or as mixtures for alkaline protease production in SSF. The combination of wheat bran (WB) with chopped date stones (CDS) (5:5) proved to be an efficient mixture for protease production as it gave the highest enzyme activity (90.50 U g⁻¹) when compared to individual WB (74.50 U g⁻¹) or CDS (69.50 U g⁻¹) substrates. This mixed solid substrate was used for the production of protease from Streptomyces sp. CN902 under SSF. Maximal protease production (220.50 U g⁻¹) was obtained with an initial moisture content of 60%, an inoculum level of 1 × 10⁸ (spore g⁻¹ substrate) when incubated at 45°C for 5 days. Supplementation of WB and CDS mixtures with yeast extract as a nitrogen source further increased protease production to 245.50 U g⁻¹ under SSF. Our data demonstrated the usefulness of solid-state fermentation in the production of alkaline protease using WB and CDS mixtures as substrate. Moreover, this approach offered significant benefits due to abundant agro-industrial substrate availability and cheaper cost.     

Tannase production by Aspergillus aculeatus DBF9 through solid-state fermentation

Tannase an industrially important enzyme was produced by Aspergillus aculeatus DBF9 through a solid-state fermentation (SSF). The organism produced good amount of enzyme and gallic acid in wheat bran among the solid substrate used in SSF. Maximum enzyme and gallic acid production occurred in 5% tannic acid after 72 h. Eighty percent initial substrate moisture and 30 degrees C temperature was found suitable for tannase production.     

Optimization of xylanase production using inexpensive agro-residues by alkalophilic Bacillus subtilis ASH in solid-state fermentation

Alkalophilic Bacillus subtilis ASH produced high levels of xylanase using easily available inexpensive agricultural waste residues such as wheat bran, wheat straw, rice husk, sawdust, gram bran, groundnut and maize bran in solid-state fermentation (SSF). Among these, wheat bran was found to be best substrate. Xylanase production was highest after 72 h of incubation at 37 °C and at a substrate to moisture ratio of 1:2 (w/v). The inoculum level of 15% resulted in maximum production of xylanase. The enzyme production was stimulated by the addition of nutrients such as yeast extract, peptone and beef extract. In contrast, addition of glucose and xylose repressed the production of xylanase. The extent of repression by glucose (10%, w/v) was 81% and it was concentration-dependent. Supplementation of the medium with 4% xylose caused 59% repression. Under optimized conditions, xylanase production in SSF (8,964 U of xylanase/g dry wheat bran) was about twofold greater than in submerged fermentation. Thus, B. subtilis produced a very high level of xylanase in SSF using inexpensive agro-residues, a level which is much higher than that reported by any other bacterial isolate. Furthermore, the enzyme was produced at room temperature and with tap water without the addition of any mineral salt in SSF, leading to a marked decrease in the cost of xylanase production, which enhances its industrial potential.     

Production,purification and characterization of <Emphasis Type="Italic">Bacillus</Emphasis> sp. GRE7 xylanase and its application in eucalyptus Kraft pulp biobleaching

Production of extracellular xylanase from Bacillus sp. GRE7 using a bench-top bioreactor and solid-state fermentation (SSF) was attempted. SSF using wheat bran as substrate and submerged cultivation using oat-spelt xylan as substrate resulted in an enzyme productivity of 3,950 IU g⁻¹ bran and 180 IU ml⁻¹, respectively. The purified enzyme had an apparent molecular weight of 42 kDa and showed optimum activity at 70°C and pH 7. The enzyme was stable at 60–80°C at pH 7 and pH 5–11 at 37°C. Metal ions Mn²⁺ and Co²⁺ increased activity by twofold, while Cu²⁺ and Fe²⁺ reduced activity by fivefold as compared to the control. At 60°C and pH 6, the K _m for oat-spelt xylan was 2.23 mg ml⁻¹ and V _max was 296.8 IU mg⁻¹ protein. In the enzymatic prebleaching of eucalyptus Kraft pulp, the release of chromophores, formation of reducing sugars and brightness was higher while the Kappa number was lower than the control with increased enzyme dosage at 30% reduction of the original chlorine dioxide usage. The thermostability, alkali-tolerance, negligible presence of cellulolytic activity, ability to improve brightness and capacity to reduce chlorine dioxide usage demonstrates the high potential of the enzyme for application in the biobleaching of Kraft pulp.     

Isolation and purification of an extracellular protease from a new strain of Bacillus subtilis, viz.NCIM 2711

A new extracellular protease having a prospective application in the food industry was isolated from Bacillus sUbtilis NCIM 2711 by (NH4)2SO4 precipitation from the cell broth. It was purified using DEAE-Cellulose and CM-Sephadex C-50 ion-exchange chromatography. With casein as a substrate, the proteolytic activity of the purified protease was found to be optimal at pH 7.0 and temperature 55 degrees C with Km 1.06 mg/ml. The enzyme was stable over a pH range 6.5-8.0 at 30 degrees C for 1 hr in presence of CaCl2 x 2H2O. At 55 degrees C, the enzyme retained 60% activity up to 15 min in presence of CaCl2 x 2H2O. EDTA and o-phenanthroline (OP) completely inhibited the enzyme activity while DFP, PMSF and iodoacetamide were ineffective. The enzyme was completely inhibited by Hg2+ and partially by Cd2+, Cu2+, Ni2+, Pb2+ and Fe2+. The OP inhibited enzyme could be reactivated by Zn2+ and Co2+ up to 75% and 69% respectively. It is a neutral metalloprotease showing a single band of 43 kDa on SDS-PAGE.     

Production and optimization of process parameters for alkaline protease production by a newly isolated Bacillus sp. under solid state fermentation

Production of alkaline protease employing the laboratory isolate, Bacillus sp. under solid state fermentation (SSF) was optimized. The effect of wheat bran and lentil husk was examined. Wheat bran showed highest enzyme production. The appropriate incubation time, inoculum size, moisture level and buffer solution level were determined. Maximum yields of 429.041 and 168.640 U g⁻¹ were achieved by employing wheat bran and lentil husk as substrates in 0.1 M carbonate/bicarbonate buffer at pH 10 with 30 and 40% initial moisture level at 24 h. Inoculum size and buffer solution level were found to be 20 and 25% and 0.5:1 for wheat bran and lentil husk, respectively.     

alpha-Galactosidase from Bacillus megaterium VHM1 and its application in removal of flatulence-causing factors from soymilk

A bacterial strain capable of producing extracellular alpha-galactosidase was isolated from sugar cane industrial waste soil sample. Microbiological, physiological, and biochemical studies revealed that isolate belonged to Bacillus sp,. Furthermore, 16S rDNA sequence analysis of new isolates was identified as Bacillus megaterium VHM1. The production of alpha-galactosidase was optimized by various physical culture conditions. Guar gum and yeast extract acted as the best carbon and nitrogen source, respectively for the production of alpha-galactosidase. The enzyme showed an optimum pH at 7.5 and was stable over a pH between 5 and 9. The enzyme was optimally active in 55degreesC and the enzyme was thermostable with half life of 120 minutes at 55 degrees C and lost their 90%, residual activity in 120 minutes at 60 degrees C. alpha-Galactosidase was strongly inhibited by Ag2, Cu2, and Hg2+ at 1mM concentration. The metal ions Fe2, Mn2+, and Mg2+ had no effect on alpha-galactosidase activity, Zn2+,Ni2+, and Ca2+ reduced the enzyme activity slightly. The B megaterium VHM1 enzyme treatment completely hydrolyzed flatulence-causing sugars of soymilk within one and half hour.     

Streptomyces sp. TEM 33 possesses high lipolytic activity in solid-state fermentation in comparison with submerged fermentation

Solid-state fermentation (SSF) is a bioprocess that doesn’t need an excess of free water, and it offers potential benefits for microbial cultivation for bioprocesses and product development. In comparing the antibiotic production, few detailed reports could be found with lipolytic enzyme production by Streptomycetes in SSF. Taking this knowledge into consideration, we prefer to purify Actinomycetes species as a new source for lipase production. The lipase-producing strain Streptomyces sp. TEM 33 was isolated from soil and lipase production was managed by solid-state fermentation (SSF) in comparison with submerged fermentation (SmF). Bioprocess-affecting factors like initial moisture content, incubation time, and various carbon and nitrogen additives and the other enzymes secreted into the media were optimized. Lipase activity was measured as 1.74 ± 0.0005 U/g dry substrate (gds) by the p-nitrophenylpalmitate (pNPP) method on day 6 of fermentation with 71.43% final substrate moisture content. In order to understand the metabolic priority in SSF, cellulase and xylanase activity of Streptomyces sp. TEM33 was also measured. The microorganism degrades the wheat bran to its usable form by excreting cellulases and xylanases; then it secretes the lipase that is necessary for degrading the oil in the medium.     

Isolation and characterization of a metal ion-dependent alkaline protease from a halotolerant Bacillus aquimaris VITP4

A halotolerant bacterium Bacillus acquimaris VITP4 was used for the production of extracellular protease. Fractional precipitation using ammonium chloride was used to obtain the enzyme. The protease exhibited optimum activity at pH 8.0 and 40 degrees C and retained 50% of its optimal proteolytic activity even in the presence of 4 M NaCl, suggesting that it is halotolerant. The molecular mass of protease, as revealed by SDS-PAGE was found to be 34 kDa and the homogeneity of the enzyme was confirmed by gelatin zymography and reverse-phase HPLC. Upon purification, the specific activity of th enzyme increased from 533 U/mg to 1719 U/mg. Protease inhibitors like phenyl methane sulphonyl fluoride and 2-mercaptoethanol did not affect the activity of the enzyme, but EDTA inhibited the activity, indicating the requirement of metal ions for activity. Cu2, Ni2+ and Mn2+ enhanced the enzyme activity, but Zn2+, Hg2+ and Fe2+ decreased the activity, while Mg2+, Ca2+ and K+ had no effect on the enzyme activity. The protease was quite stable in the presence of cationic (CTAB), anionic (SDS) and neutral detergents (Triton X-100 and Tween-20) and exhibited antimicrobial activity against selected bacterial and fungal strains. The stability characteristics and broad spectrum antimicrobial activity indicated the potential use of this protease in industrial applications.     

土壤中高产蛋白酶菌株产酶条件及酶学性质

【背景】微生物蛋白酶已经成为工业用蛋白酶的主要来源,筛选具有特殊环境适应性的微生物成为生物酶资源的开发热点。【目的】通过对青藏高原土壤微生物产蛋白酶菌株的筛选、优化及相关特性研究,寻找新的蛋白酶资源,为高原菌种资源利用提供科学依据。【方法】采用形态学和分子生物学对筛选菌株进行菌种鉴定,利用单因素试验和正交试验对菌株进行发酵条件优化及酶学性质的探究。【结果】筛选出一株高产蛋白酶菌株XC2,经鉴定菌株XC2为枯草芽孢杆菌(Bacillus subtilis)。XC2最优产酶条件:可溶性淀粉4.0%,牛肉膏1.0%,K~+0.6%,培养温度34°C、初始pH 7.0、接种量2.0%的条件下200 r/min振荡培养13 h,所产蛋白酶活力最高为638.5 U/mL。XC2所产蛋白酶最适反应温度60°C,最适pH9.0;40-50°C、pH8.0-10.0条件下酶活稳定性较高;Mn~(2+)对酶活力有明显激活作用,而Zn~(2+)、Cu~(2+)、Fe~(2+)、Fe3+对酶活力有明显抑制作用。【结论】枯草芽孢杆菌XC2有较强的产碱性蛋白酶的能力,具有较好的应用前景。     

芽孢杆菌M50产生β—甘露聚糖酶的条件研究

从土壤中分离到９株产生β－甘露聚糖酶的芽孢杆菌（Ｂａｃｉｌｌｕｓ ｓｐ．）。Ｂａｃｉｌｌｕｓ ｓｐ．Ｍ５０２５０ｍＬ三角瓶摇瓶培养试验,以４％的魔芋粉为碳源,１．０％（ＮＨ４）２ＳＯ４为氮源,０．３５％Ｎａ２ＣＯ３,３０～３４℃培养６０ｈ产酶达到高峰。酶活力为１８０～２２０ｕ／ｍＬ。１００Ｌ罐发酵,在３０～３２℃,１：０．７５ｖｖｍ通气量,２００ｒ／ｍｉｎ条件下,发酵液酶活力高达３３０ｕ／ｍＬ。     

High-level xylanase production by alkaliphilic Bacillus pumilus ASH under solid-state fermentation

Bacillus pumilus ASH produced a high level of an extracellular and thermostable xylanase enzyme when grown using solid-state fermentation (SSF). Among a few easily available lignocellulosics tested, wheat bran was found to be the best substrate (5,300 U/g of dry bacterial bran). Maximum xylanase production was achieved in 72 h (5,824 U/g). Higher xylanase activity was obtained when wheat bran was moistened with deionized water (6,378 U/g) at a substrate-to-moisture ratio of 1:2.5 (w/v). The optimum temperature for xylanase production was found to be 37°C. The inoculum level of 15% was found to be the most suitable for maximum xylanase production (7,087 U/g). Addition of peptone stimulated enzyme production followed by yeast extract and mustard oil cake, whereas glucose, xylose and malt extract greatly repressed the enzyme activity. Repression by glucose was concentration-dependent, repressing more than 60% of the maximum xylanase production at a concentration of 10% (w/v). Cultivation in large enamel trays yielded a xylanase titre that was slightly lower to that in flasks. The enzyme activity was slightly lower in SSF than in SmF but the ability of the organism to produce such a high level of xylanase at room temperature and with deionized water without addition of any mineral salts in SSF, could lead to substantial reduction in the overall cost of enzyme production. This is the first report on production of such a high level of xylanase under SSF conditions by bacteria.     

Isolation, purification and characterization of xylanasefrom Staphylococcus sp. SG-13 and its application in biobleaching of kraft pulp

A haloalkalophilic Staphylococcus sp. SG-13 produced an alkalistable xylanase in wheat bran medium. A 12-fold purification was achieved by using standard purification techniques. The purified xylanase exhibited a dual pH optima of 7.5 and 9.2. The optimum temperature for enzyme activity was 50 degrees C. The enzyme was stable at 50 degrees C for more than 4 h. The xylanase exhibited Km and Vmax values of 4 mg ml-1, 90 micromol min-1 per mg for birchwood xylan and 7 mg ml-1, 55 micromol min-1 per mg for oatspelt xylan, respectively. The substrate binding affinity of xylanase was more for oatspelt xylan but birchwood xylan was hydrolysed more rapidly. The xylanase activity was stimulated by Fe2+, Ni2+, Cu2+ and dithiothreitol up to 60% and was strongly inhibited in the presence of Co2+, Hg2+, Pb2+, phenyl methane sulphonyl fluoride, ethylenediaminetetraacetic acid, and acetic anhydride up to 100%. The xylanase dose of 1.8 U g-1 moisture free pulp, exhibited bleach boosting of kraft pulps optimally at pH 9.5-10.0 and 50 degrees C after 4 h of reaction time. Pretreatment of pulp with xylanase and its subsequent treatment with 8% hypochlorite, reduced the kappa number by 30%, enhanced the brightness and viscosity by 11% and 1.8%, respectively, and improved the paper properties such as tensile strength and burst factor up to 10% and 17%, respectively.     

Enhanced production of pectinase by Bacillus sp. DT7 using solid state fermentation

Bacillus sp. DT7 produced very high levels of alkaline and thermotolerant pectinase by solid state fermentation. Production of this enzyme was affected by nature of solid substrate, level of moisture content, presence or absence of carbon, nitrogen, mineral and vitamin supplements. Maximum enzyme production of 8050 U/g dry substrate was obtained in wheat bran supplemented with polygalacturonic acid (PGA; 1%, w/v) and neurobion (a multivitamin additive; 27 micro l/g dry substrate) with distilled water at 75% moisture level, after 36 h of incubation at 37 degrees C.     

Production,partial characterization,and immobilization in alginate beads of an alkaline protease from a new thermophilic fungus <Emphasis Type="Italic">Myceliophthora</Emphasis> sp.

Thermophilic fungi produce thermostable enzymes which have a number of applications, mainly in biotechnological processes. In this work, we describe the characterization of a protease produced in solidstate (SSF) and submerged (SmF) fermentations by a newly isolated thermophilic fungus identified as a putative new species in the genus Myceliophthora. Enzyme-production rate was evaluated for both fermentation processes, and in SSF, using a medium composed of a mixture of wheat bran and casein, the proteolytic output was 4.5-fold larger than that obtained in SmF. Additionally, the peak of proteolytic activity was obtained after 3 days for SSF whereas for SmF it was after 4 days. The crude enzyme obtained by both SSF and SmF displayed similar optimum temperature at 50°C, but the optimum pH shifted from 7 (SmF) to 9(SSF). The alkaline protease produced through solid-state fermentation (SSF), was immobilized on beads of calcium alginate, allowing comparative analyses of free and immobilized proteases to be carried out. It was observed that both optimum temperature and thermal stability of the immobilized enzyme were higher than for the free enzyme. Moreover, the immobilized enzyme showed considerable stability for up to 7 reuses.     

An activated by cobalt alkaline aminopeptidase from Bacillus mycoides

An intracellular arginine--specific aminopeptidase synthesized by Bacillus mycoides was purified and characterized. The purification procedure for studied aminopeptidase consisted of ammonium sulphate precipitation and three chromatographic steps: anion exchange chromatography and gel permeation chromatography. A molecular weight of -50 kDa was estimated for the aminopeptidase by gel permeation chromatography and SDS-PAGE. The optimal activity of the enzyme on arginyl-beta-naphthylamide as a substrate was at 37 degrees C and pH 9.0. The enzyme showed maximum specificity for basic amino acids: such as Arg and Lys but was also able to hydrolyze aromatic amino acids: Trp, Tyr, and Phe. Co2+ ions activated the enzyme, while Zn2+, Cu2+, Hg2+ and Mn2+ inhibited it. The enzyme is a metalloaminopeptidase whose activity is inhibited by typical metalloaminopeptidase inhibitors: EDTA and 1,10-phenanthroline. Analysis of fragments of the amino acid sequence of the purified enzyme demonstrated high similarity to AmpS of Bacillus cereus and AP II of B. thuringensis.     

SSF production,purification and characterization of chitin deacetylase from Aspergillus flavus

The production of an extracellular chitin deacetylase (CDA) produced by Aspergillus flavus under solid-substrate fermentation (SSF) using wheat bran as substrate was optimized using statistical methods. The CDA production in SSF increased 1.79-fold in comparison to the unoptimized basal level medium. It was purified to a final purity of 3.94-fold by ammonium sulphate precipitation, ion-exchange chromatography, and gel-permeation chromatography (GPC) consecutively and further characterized. The molecular mass of the enzyme was estimated to be about 28?kDa by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and GPC analysis. The optimum pH and temperature of the purified enzyme were pH 8.0 and 50?°C, respectively. Additionally, the effect of some cations and other chemical compounds on the CDA activity was studied. A marginal increase in enzyme activity was observed with metal ions mainly Mn²⁺ and Zn²⁺. No inhibition of the enzyme was observed by the end product, that is, acetate up to 70?mM concentration. The K_m and k_cat values of the enzyme were determined to be 9.45?mg mL^?1 and 26.72?s^?1 respectively, using colloidal chitin as substrate. Among various substrates tested, glycol chitin and colloidal chitin were deacetylated.     

Optimization of some additives to improve protease production under SSF

In a locally isolated Rhizopus oryzae strain highest-production of protease (388.54/g wheat bran) was observed in presence of Tween-80 and dioctyl sodium sulfosuccinate individually at 40mg/g wheat bran concentration. Under solid state fermentation biotin (0.0025mg/g wheat bran); Ca2+ (0.05mg/g wheat bran) and 1-Naphthyl acetic acid (0.01mg/g wheat bran) also showed some inducing effect on the synthesis of the enzyme protease by solid state fermentation.