Coconut cake – a potent substrate for the production of lipase by Candida rugosa in solid-state fermentation

Investigations were conducted with the aim of producing extracellular lipase from Candida rugosa by solid-state fermentation (SSF), using coconut oil cake (COC) as a solid substrate. To optimize production, various modifications were made to enrich the substrate by supplementing it with mineral solution, different carbon sources and several inorganic as well as organic nitrogen sources. Among them, urea (1%), peptone (3%) and maltose (5%) were found to be most suitable. Addition of olive oil (10%) encouraged lipase synthesis. The maximum lipase activity in the enriched substrate was 87.76 units per gram of dry fermented substrate [U/gds] compared to 25.81 U/gds in the raw cake at 96 h of fermentation, and growth was as high as 14.44 mg/gds of glucosamine. This was reached at 72 h in the enriched substrate. C. rugosa growth was calculated indirectly by estimating the glucosamine content in the cell wall after its hydrolysis. The enzyme yield was far better than any values reported as yet.     

Microbial production of extra-cellular phytase using polystyrene as inert solid support

Aspergillus ficuum TUB F-1165 and Rhizopus oligosporus TUB F-1166 produced extra-cellular phytase during solid-state fermentation (SSF) using polystyrene as inert support. Maximal enzyme production (10.07 U/g dry substrate (U/gds) for A. ficuum and 4.52 U/gds for R. oligosporus) was observed when SSF was carried out with substrate pH 6.0 and moisture 58.3%, incubation temperature 30 degrees C, inoculum size of 1.3 x 10(7) spores/5 g substrate, for 72 h for A. ficuum and with substrate pH 7.0 and moisture 58.3%, incubation temperature 30 degrees C, inoculum size of 1 x 10(6) spores/5 g substrate for 96 h for R. oligosporus. Results indicated scope for production of phytase using polystyrene as inert support.     

Parametric optimization of feruloyl esterase production from Aspergillus terreus strain GA2 isolated from tropical agro-ecosystems cultivating sweet sorghum

A fungal strain, Aspergillus terreus strain GA2, isolated from an agricultural field cultivating sweet sorghum, produced feruloyl esterase using maize bran. In order to obtain maximum yields of feruloyl esterase, the solid state fermentation (SSF) conditions for enzyme production were standardized. Effective feruloyl esterase production was observed with maize bran as substrate followed by wheat bran, coconut husk, and rice husk among the tested agro-waste crop residues. Optimum particle size of 0.71- 0.3 mm and moisture content of 80% favored enzyme production. Moreover, optimum feruloyl esterase production was observed at pH 6.0 and a temperature of 30 degrees C. Supplementation of potato starch (0.6%) as the carbon source and casein (1%) as the nitrogen source favored enzyme production. Furthermore, the culture produced the enzyme after 7 days of incubation when the C:N ratio was 5. Optimization of the SSF conditions revealed that maximum enzyme activity (1,162 U/gds) was observed after 7 days in a production medium of 80% moisture content and pH 6.0 containing 16 g maize bran [25% (w/v)] of particle size of 0.71-0.3 mm, 0.6% potato starch, 3.0% casein, and 64 ml of formulated basal salt solution. Overall, the enzyme production was enhanced by 3.2-fold as compared with un-optimized conditions.     

Comparison of phytase production on wheat bran and oilcakes in solid-state fermentation by Mucor racemosus

Comparisons were made for phytase production using wheat bran (WB) and oilcakes as substrates in solid-state fermentation (SSF) by Mucor racemosus NRRL 1994. WB was also used as mixed substrate with oil cakes. Sesame oil cake (SOC) served as the best carbon source for phytase synthesis by the fungal strain as it gave the highest enzyme titres (30.6 U/gds). Groundnut oil cake (GOC) also produced a reasonably good quantity of enzyme (24.3 U/gds). Enzyme production on WB was surprisingly much less (almost 3.5 times less in comparison to SOC). Mixing WB with SOC (1:1 ratio) resulted in better phytase activity (32.2 U/gds). Optimization of various process parameters such as incubation time, initial moisture content and inoculum concentration was carried out using the single variable mode optimization technique. Under optimized conditions, the production of phytase reached 44.5 U/gds, which was almost 1.5-fold higher than the highest yield obtained with any individual substrate used in this study and was more than 4-fold higher than that obtained from WB.     

Tamarind seed powder and palm kernel cake: two novel agro residues for the production of tannase under solid state fermentation by Aspergillus niger ATCC 16620

Palm kernel cake (PKC), the residue obtained after extraction of palm oil from oil palm seeds and tamarind seed powder (TSP) obtained after removing the fruit pulp from tamarind fruit pod were tested for the production of tannase under solid-state fermentation (SSF) using Aspergillus niger ATCC 16620. The fungal strain was grown on the substrates without any pretreatment. In PKC medium, a maximum enzyme yield of 13.03 IU/g dry substrate (gds) was obtained when SSF was carried out at 30 degrees C, 53.5% initial substrate moisture, 33 x 10(9) spores/5 g substrate inoculum size and 5% tannic acid as additional carbon source after 96 h of fermentation. In TSP medium, maximum tannase yield of 6.44 IU/gds was obtained at 30 degrees C, 65.75% initial substrate moisture, 11 x 10(9) spores/5 g substrate inoculum, 1% glycerol as additional carbon source and 1% potassium nitrate as additional nitrogen source after 120 h of fermentation. Results from the study are promising for the economic utilization and value addition of these important agro residues, which are abundantly available in many tropical and subtropical countries.     

Solid state fermentation for the production of α-amylase from Penicillium chrysogenum using mixed agricultural by-products as substrate

Production of α-amylase from local isolate, Penicillium chrysogenum, under solid-state fermentation (SSF) was carried out in this study. Different agricultural by-products, such as wheat bran (WB), sunflower oil meal (SOM), and sugar beet oil cake (SBOC), were used as individual substrate for the enzyme production. WB showed the highest enzyme activity (750 U/gds). Combination of WB, SOM, and SBOC (1:3:1 w/w/w) resulted in a higher enzyme yield (845 U/gds) in comparison with the use of the individual substrate. This combination was used as mixed solid substrate for the production of α-amylase from P. chrysogenum by SSF. Fermentation conditions were optimized. Maximum enzyme yield (891 U/gds) was obtained when SSF was carried out using WB + SOM + SBOC (1:3:1 w/w/w), having initial moisture of 75%, inoculum level of 20%, incubation period of 7 days at 30°C. Galactose (1% w/w), urea and peptone (1% w/w), as additives, caused increase in the enzyme activity.     

Enhanced lignin peroxidase synthesis by Phanerochaete Chrysosporium in solid state bioprocessing of a lignocellulosic substrate

Summary A solid state fermentation (SSF) process for the production of lignin peroxidase was optimized to enhance enzyme production by Phanerochaete chrysosporium. Optimization of the corncob SSF medium caused a significant reduction in fermentation time to give maximum lignin peroxidase yield. Supplementation of the SSF medium by low concentrations of peptone, yeast extract and Tween-80 enhanced lignin peroxidase production. Maximum yield of lignin peroxidase was 13.7 U/gds (units per gram dry substrate) noted after 5 days of SSF with 70% moisture and 20% (v/w) inoculum.     

High-level xylanase production by alkaliphilic Bacillus pumilus ASH under solid-state fermentation

Bacillus pumilus ASH produced a high level of an extracellular and thermostable xylanase enzyme when grown using solid-state fermentation (SSF). Among a few easily available lignocellulosics tested, wheat bran was found to be the best substrate (5,300 U/g of dry bacterial bran). Maximum xylanase production was achieved in 72 h (5,824 U/g). Higher xylanase activity was obtained when wheat bran was moistened with deionized water (6,378 U/g) at a substrate-to-moisture ratio of 1:2.5 (w/v). The optimum temperature for xylanase production was found to be 37°C. The inoculum level of 15% was found to be the most suitable for maximum xylanase production (7,087 U/g). Addition of peptone stimulated enzyme production followed by yeast extract and mustard oil cake, whereas glucose, xylose and malt extract greatly repressed the enzyme activity. Repression by glucose was concentration-dependent, repressing more than 60% of the maximum xylanase production at a concentration of 10% (w/v). Cultivation in large enamel trays yielded a xylanase titre that was slightly lower to that in flasks. The enzyme activity was slightly lower in SSF than in SmF but the ability of the organism to produce such a high level of xylanase at room temperature and with deionized water without addition of any mineral salts in SSF, could lead to substantial reduction in the overall cost of enzyme production. This is the first report on production of such a high level of xylanase under SSF conditions by bacteria.     

Cost-effective production of cellulose hydrolysing enzymes from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. RCK65 under SSF and its evaluation in saccharification of cellulosic substrates

Trichoderma sp. is a potential cellulase producing mesophilic fungi which grow under mild acidic condition. In this study, growth and nutritional conditions were manipulated for the maximum and cost-effective production of cellulase using lab strain Trichoderma sp. RCK65 and checked for its efficiency in hydrolysis of Prosopis juliflora (a woody substrate). Preliminary studies suggested that when 48 h old secondary fungal culture (20 % v/w) was inoculated in wheat bran moistened with mineral salt solution (pH 4.5 and 1:3 solid to moisture ratio), incubated at 30 °C and after 72 h, it produced maximum cellulase (CMCase 145 U/gds, FPase 38 U/gds and β-glucosidase 105 U/gds). However, using statistical approach a S:L ratio (1:1) was surprisingly found to be optimum that improved cellulase that is CMCase activity by 6.21 %, FPase activity by 23.68 % and β-glucosidase activity by 37.28 %. The estimated cost of crude enzyme (Rs. 5.311/1000 FPase units) seems to be economically feasible which may be due to high enzyme titre, less cultivation time and low media cost. Moreover, when the crude enzyme was used to saccharify pretreated Prosopis juliflora (a woody substrate), it resulted up to 83 % (w/w) saccharification.     

Predicting vegetative inoculum performance to maximize phytase production in solid-state fermentation using response surface methodology

Microbial phytase is used to reduce the environmental loading of phosphorus from animal production facilities. The limiting factors in the use of this enzyme in animal feeds can be overcome by solid-state fermentation (SSF), which is a promising technology for commercial enzyme production with lower production costs. Inoculum quality and the influence of inoculum quality on phytase production are important factors which need in-depth investigation before scaling-up of high-yielding fermentation process. A full factorial experimental design for 240 h with sampling at every 24 h was used to determine the effects of the treatments, inoculum age (plate and liquid culture), media composition and the duration of SSF on the production of fungal biomass and phytase in SSF systems using Aspergillus niger. The optimal treatment combination for maximal phytase production was determined by statistically comparing all treatments at each sampling time. Both 7- and 14-day plate cultures and M1+ medium composition with 72-h-old liquid inoculum treatments resulted in optimal phytase production at 144 h of SSF, which was the shortest duration observed for maximal phytase production. This resulted in maximal phytase production with a mean of 884±121 U/g substrate, while the maximal phytase production observed at 216 h of SSF (mean phytase activity of 1008±121 U/g substrate), with the same treatment combinations, was not statistically significant from that at 144 h of SSF. Phytase production was strongly growth-associated with younger inocula. The significant treatment variables, age of liquid inoculum and the duration of SSF, were used to predict the system response for phytase production using response surface methodology. From the response surface model, the optimal response of the experiment was predicted and the reliability of the prediction was checked with the verification experiment. Journal of Industrial Microbiology & Biotechnology (2001) 26, 161–170. Received 06 June 2000/ Accepted in revised form 14 October 2000     

Mixed substrate solid state fermentation for production and extraction of lipase from Aspergillus niger MTCC 2594

A novel mixed substrate solid-state fermentation (SSF) process has been developed for Aspergillus niger MTCC 2594 using wheat bran (WB) and gingelly oil cake (GOC) and the results showed that addition of GOC to WB (WB : GOC, 3 : 1, w/w) increased the lipase activity by 36.0% and the activity was 384.3+/-4.5 U/g dry substrate at 30 degrees C and 72 h. Scale up of lipase production to 100 g and 1 kg tray-level batch fermentation resulted in 95.0% and 84.0% of enzyme activities respectively at 72 h. A three-stage multiple contact counter-current extraction yielded 97% enzyme recovery with a contact time of 60 min. However, extraction by simple percolation and plug-flow methods resulted in decreased enzyme recoveries. The mixed substrate SSF process has resulted in a significant increase in specific activity (58.9%) when compared to a submerged fermentation (SmF) system. Furthermore, an efficient process of extraction has been standardized with this process. Use of GOC along with WB as potential raw materials for enzyme production could be of great commercial significance. This is the first report on the production and extraction of lipase from Aspergillus niger using mixed solid substrates, WB and GOC, which are potential raw materials for the production of enzymes and other value-added products.     

Production of tannase from Aspergillus ruber under solid-state fermentation using jamun (Syzygium cumini) leaves

Tannase producing fungal strains were isolated from different locations including garbages, forests and orchards, etc. The strain giving maximum enzyme yield was identified to be Aspergillus ruber. Enzyme production was studied under solid state fermentation using different tannin rich substrates like ber leaves (Zyzyphus mauritiana), jamun leaves (Syzygium cumini), amla leaves (Phyllanthus emblica) and jawar leaves (Sorghum vulgaris). Jamun leaves were found to be the best substrate for enzyme production under solid-state fermentation (SSF). In SSF with jamun leaves, the maximum production of tannase was found to be at 30 °C after 96 h of incubation. Tap water was found to be the best moistening agent, with pH 5.5 in ratio of 1:2 (w/v) with substrate. Addition of carbon and nitrogen sources to the medium did not increase tannase production. Under optimum conditions as standardized here, the enzyme production was 69 U/g dry substrate. This is the first report on production of tannase by A. ruber, giving higher yield under SSF with agro-waste as the substrate.     

Mixed-solid substrate fermentation. A novel process for enhanced lipase production by Candida rugosa

Candida rugosa was cultivated in a mixed-solid substrate containing coconut oil cake (COC) and fine and coarse wheat bran (1:1:1) with an initial water activity (a_w) of 0.92. The substrate was modified by adding a mineral solution (5%), corn steep liquor (6%), maltose (2%), peptone (3%), olive oil (10%), gum arabic (0.4%), different fatty acids (0.3%) and Tweens (0.5%). Fermentation in a column fermenter significantly improved the lipase yield to 118.2 Units per gram of dry fermented substrate [U/gds] at 72 h. This result was obtained 24 hours earlier than in our former studies (87.76 U/gds at 96 h) in COC, and the yield showed a 38% increase. Growth was measured indirectly by determining the glucosamine content in the cell wall of the yeast contained in the fermented matter, after its hydrolysis.     

Streptomyces sp. TEM 33 possesses high lipolytic activity in solid-state fermentation in comparison with submerged fermentation

Solid-state fermentation (SSF) is a bioprocess that doesn’t need an excess of free water, and it offers potential benefits for microbial cultivation for bioprocesses and product development. In comparing the antibiotic production, few detailed reports could be found with lipolytic enzyme production by Streptomycetes in SSF. Taking this knowledge into consideration, we prefer to purify Actinomycetes species as a new source for lipase production. The lipase-producing strain Streptomyces sp. TEM 33 was isolated from soil and lipase production was managed by solid-state fermentation (SSF) in comparison with submerged fermentation (SmF). Bioprocess-affecting factors like initial moisture content, incubation time, and various carbon and nitrogen additives and the other enzymes secreted into the media were optimized. Lipase activity was measured as 1.74 ± 0.0005 U/g dry substrate (gds) by the p-nitrophenylpalmitate (pNPP) method on day 6 of fermentation with 71.43% final substrate moisture content. In order to understand the metabolic priority in SSF, cellulase and xylanase activity of Streptomyces sp. TEM33 was also measured. The microorganism degrades the wheat bran to its usable form by excreting cellulases and xylanases; then it secretes the lipase that is necessary for degrading the oil in the medium.     

Production of protease and lipase by solvent tolerant Pseudomonas aeruginosa PseA in solid-state fermentation using Jatropha curcas seed cake as substrate

Deoiled Jatropha seed cake was assessed for its suitability as substrate for enzyme production by solid-state fermentation (SSF). Solvent tolerant Pseudomonas aeruginosa PseA strain previously reported by us was used for fermentation. The seed cake supported good bacterial growth and enzyme production (protease, 1818 U/g of substrate and lipase, 625 U/g of substrate) as evident by its chemical composition. Maximum protease and lipase production was observed at 50% substrate moisture, a growth period of 72 and 120 h, and a substrate pH of 6.0 and 7.0, respectively. Enrichment with maltose as carbon source increased protease and lipase production by 6.3- and 1.6-fold, respectively. Nitrogen supplementation with peptone for protease and NaNO(3) for lipase production also enhanced the enzyme yield reaching 11,376 U protease activity and 1084 U lipase activity per gram of Jatropha seed cake. These results demonstrated viable approach for utilization of this huge biomass by solid-state fermentation for the production of industrial enzymes. This offers significant benefit due to low cost and abundant availability of cake during biodiesel production.     

A specific short dextrin-hydrolyzing extracellular glucosidase from the thermophilic fungus Thermoascus aurantiacus 179-5

The thermophilic fungus Thermoascus aurantiacus 179-5 produced large quantities of a glucosidase which preferentially hydrolyzed maltose over starch. Enzyme production was high in submerged fermentation, with a maximal activity of 30 U/ml after 336 h of fermentation. In solid-state fermentation, the activity of the enzyme was 22 U/ml at 144 h in medium containing wheat bran and 5.8 U/ml at 48 h when cassava pulp was used as the culture medium. The enzyme was specific for maltose, very slowly hydrolyzed starch, dextrins (2-7G) and the synthetic substrate (alpha-PNPG), and did not hydrolyze sucrose. These properties suggest that the enzyme is a type II alpha-glucosidase. The optimum temperature of the enzyme was 70 degrees . In addition, the enzyme was highly thermostable (100% stability for 10 h at 60 degrees and a half-life of 15 min at 80 degrees), and stable within a wide pH range.     

Production of an Antifungal Chitinase from Enterobacter sp. NRG4 and its Application in Protoplast Production

Summary In this study flake chitin, crab shell chitin, mushroom stalk, fungal cell wall, wheat bran and rice bran were used as substrate for chitinase production by Enterobacter sp. NRG4 under submerged and solid state fermentation (SSF) conditions. Enterobacter sp. NRG4 produced 72 and 49.7 U/ml of chitinase in presence of cell walls of Candida albicans and Fusarium moniliforme in submerged fermentation. Under SSF, maximum chitinase production was 965 U/g solid substrate with flake chitin and wheat bran (1:3 ratio) at 75% moisture level after 144 h. The purified chitinase inhibited hyphal extension of Fusarium moniliforme, Aspergillus niger, Mucor rouxi and Rhizopus nigricans. The chitinase was effective in release of protoplasts from Trichoderma ressei, Pleurotus florida, Agaricus bisporus and Aspergillus niger. Protoplasts yield was maximum with 60 mg of 24 h old fungal mycelium incubated with 60 U of chitinase and 60 U of cellulase.     

Optimization of xylanase production using inexpensive agro-residues by alkalophilic Bacillus subtilis ASH in solid-state fermentation

Alkalophilic Bacillus subtilis ASH produced high levels of xylanase using easily available inexpensive agricultural waste residues such as wheat bran, wheat straw, rice husk, sawdust, gram bran, groundnut and maize bran in solid-state fermentation (SSF). Among these, wheat bran was found to be best substrate. Xylanase production was highest after 72 h of incubation at 37 °C and at a substrate to moisture ratio of 1:2 (w/v). The inoculum level of 15% resulted in maximum production of xylanase. The enzyme production was stimulated by the addition of nutrients such as yeast extract, peptone and beef extract. In contrast, addition of glucose and xylose repressed the production of xylanase. The extent of repression by glucose (10%, w/v) was 81% and it was concentration-dependent. Supplementation of the medium with 4% xylose caused 59% repression. Under optimized conditions, xylanase production in SSF (8,964 U of xylanase/g dry wheat bran) was about twofold greater than in submerged fermentation. Thus, B. subtilis produced a very high level of xylanase in SSF using inexpensive agro-residues, a level which is much higher than that reported by any other bacterial isolate. Furthermore, the enzyme was produced at room temperature and with tap water without the addition of any mineral salt in SSF, leading to a marked decrease in the cost of xylanase production, which enhances its industrial potential.     

Use of evolutionary operation (EVOP) factorial design technique to develop a bioprocess using grease waste as a substrate for lipase production

The aim of the present work was to develop a bioprocess using EVOP-factorial design technique employing grease waste as a substrate for the production of lipase. A newly isolated fungal strain of Penicillium chrysogenum was explored for the fermentation process. Solid-state fermentation (SSF) was carried out using grease waste and Czapek-dox medium, supplemented with wheat bran. The yield of lipase was 38 U/ml when SSF was carried out at 32 °C for 8 days and grease:wheat bran:Czapek-dox media in 1:1:2 (w/w/v). Different physicochemical parameters affecting the production of lipase were optimized through evolutionary operation (EVOP) factorial design technique and after optimization yield was enhanced up to 46 U/ml at 30 °C, pH 7.0 with 1:1:2 (w/w/v) grease waste:wheat bran:Czapek-dox media. Industrial grease waste has never been reported before for the production of industrially important lipase enzyme.     

Phytase production by solid-state fermentation of groundnut oil cake by Aspergillus niger: A bioprocess optimization study for animal feedstock applications

This investigation deals with the use of agro-industrial waste, namely groundnut oil cake (GOC), for phytase production by the fungi Aspergillus niger NCIM 563. Plackett–Burman design (PBD) was used to evaluate the effect of 11 process variables and studies here showed that phytase production was significantly influenced by glucose, dextrin, distilled water, and MgSO₄ · 7H₂O. The use of response surface methodology (RSM) by Box–Behnken design (BBD) of experiments further enhanced the production by a remarkable 36.67-fold from the original finding of 15 IU/gds (grams of dry substrate) to 550 IU/gds. This is the highest solid-state fermentation (SSF) phytase production reported when compared to other microorganisms and in fact betters the best known by a factor of 2. Experiments carried out using dried fermented koji for phosphorus and mineral release and also thermal stability have shown the phytase to be as efficient as the liquid enzyme extract. Also, the enzyme, while exhibiting optimal activity under acidic conditions, was found to have significant activity in a broad range of pH values (1.5–6.5). The studies suggest the suitability of the koji supplemented with phytase produced in an SSF process by the “generally regarded as safe” (GRAS) microorganism A. niger as a cost-effective value-added livestock feed when compared to that obtained by submerged fermentation (SmF).